Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): CAKpie0SigGGsQxSU+X-Mz5boy-Xx=3wRNOcrf+F=ehFr3RBi7Q@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): CAKpie0RXM1UC33YFeFy-kAxfGhYGNkw4vUgNTThf-ZCAhPTVXw@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): CAKpie0TSo-8gmDm9_Zw4Sd+kjVVEomp8yA9Vu8qY2U2AcrQc=w@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi all,
Quoted 40 lines
Am 17.07.2019 um 12:51 schrieb Merlijn Wajer <[email protected]>:
Hi,
Quoted 18 lines · H. Nikolaus Schaller
Quoted 18 lines
Am 10.03.2019 um 00:14 schrieb Merlijn Wajer <[email protected]>:
Hi,
Quoted 10 lines · H. Nikolaus Schaller
Quoted 5 lines
Quoted 2 lines
At least I can download and start firmware. I just have to find a way to fix the omaplfb so that it works with our omapdrm based panels to runs the CLipBlit test [1] on modern kernels...
Maybe you can compare with what we have here:
https://github.com/maemo-leste/n9xx-linux/tree/pvr-wip-4.15.7/drivers/gpu/pvrI'll take a look into it especially how omaplfb is done.
First observation is that there is a "flat" tree while I am working on a structured one... But that is just a marginal difference (mainly significant for
Makefilewriters).Quoted 7 lines
Quoted 5 lines
I've ported the Maemo Leste kernel + pvr to 5.0 and it seems to work:
https://github.com/maemo-leste/n9xx-linux/commits/pvr-wip-5.0.yShould I add this as maemo-leste-n900-5.0 branch (or something) to
https://github.com/openpvrsgx-devgroup/linux_openpvrsgx ?Yes, that would be nice to be able to easily compare stuff.
I've just pushed the Maemo Leste v5.1 branch + patches here:
https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/tree/n900/v5.1-patch
This works on N900 with X, but it doesn't use DRM yet. I'm wondering what a next logical step would be: to try and modules to load/probe on another device (I have a droid4 or a Pandaboard ES rev B1), or to try and get DRM PowerVR to work on the N900, with omapdrmfb and dri3wsegl.
Quoted 7 lines
For either path, I'll probably need some help. Any updates from anyone else? Maybe we should list things people can work - perhaps document progress in github issues. (Mailing list is also fine, BTW)
Cheers,
Merlijn
I also have pushed good news to
https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/tree/letux-pvr
Thanks to the help from the Pyra community, I was able to get a (binary) reference implementation using DRM that works on Pyra/OMAP5. At least the gles1test1.
With that reference setup I was able to fix my Makefiles for the staging/pvr implementation.
I have tested that it works with v4.19.66 and v5.3-rc4 (LPAE build of the LetuxOS kernel tree) on the Pyra.
In which areas does this tree go beyond the TI SDK/IMG DDK 1.14?
* includes internal API fixes for kernels up to v5.3
* lives in drivers/staging/pvr/1.14.3699939 - so that we can ask for inclusion in linux-next
* has Kconfig and Makefiles for in-kernel configuration (no separate build system)
* builds separate kernel modules for omap3430, omap3630, am335x, omap4, omap5, dra7 etc. pvrsrvkm
e.g. pvrsrvkm_omap_omap5_sgx544_116
* the correct kernel module is automatically probed by matching .compatible in device tree so that the code is multi-platform friendly
* includes SoC integration for OMAP3/4/5 and has some preliminary bindings documentation
* code base should also support JZ4780/CI20 and some Intel Atom processors (CedarView, Poulsbo)
* has got a ToDo to describe what should be done during staging phase
My plans for the next steps are:
* do more testing (e.g. X11, kmscube)
* check if and/or how it can run on am335x (BeagleBone) or OMAP3 (e.g. GTA04, OpenPandora)
* try a JZ480/CI20 build (unfortuantely I have no HDMI there with mainline kernels and I am missing the user-space libraries for MIPS).
BR,
Nikolaus
Quoted 26 lines · H. Nikolaus Schaller
I also have pushed good news to
https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/tree/letux-pvr
Thanks to the help from the Pyra community, I was able to get a (binary) reference implementation using DRM that works on Pyra/OMAP5. At least the gles1test1.
With that reference setup I was able to fix my Makefiles for the staging/pvr implementation.
I have tested that it works with v4.19.66 and v5.3-rc4 (LPAE build of the LetuxOS kernel tree) on the Pyra.
In which areas does this tree go beyond the TI SDK/IMG DDK 1.14?
* includes internal API fixes for kernels up to v5.3
* lives indrivers/staging/pvr/1.14.3699939- so that we can ask for inclusion in linux-next
* hasKconfigand Makefiles for in-kernel configuration (no separate build system)
* builds separate kernel modules for omap3430, omap3630, am335x, omap4, omap5, dra7 etc. pvrsrvkm
e.g.pvrsrvkm_omap_omap5_sgx544_116
* the correct kernel module is automatically probed by matching .compatible in device tree so that the code is multi-platform friendly
* includes SoC integration for OMAP3/4/5 and has some preliminary bindings documentation
* code base should also support JZ4780/CI20 and some Intel Atom processors (CedarView, Poulsbo)
* has got a ToDo to describe what should be done during staging phase
Quoted 8 lines
My plans for the next steps are:
* do more testing (e.g. X11, kmscube)
* check if and/or how it can run on am335x (BeagleBone) or OMAP3 (e.g. GTA04, OpenPandora)
* try a JZ480/CI20 build (unfortuantely I have no HDMI there with mainline kernels and I am missing the user-space libraries for MIPS).
That sounds good to me, just one comment. Before getting these into staging, I'd like to have omap variants use proper interconnect target module in devicetree like we already have in omap4.dtsi as target-module@56000000. This should simplify things further as the module child device driver(s) can just enable things with runtime PM and we can leave out all the legacy hwmod platform data that sounds like you're still carrying.
I have patches here to add similar interconnect target modules for at least omap34xx, omap36xx, omap5, and am335x that I'll try to post later on today to play with. For am335x, things still depend on the recentely posted prm rstctrl patches. I'm not sure if I already did a dts patch for dra7 yet, need to check.
Regards,
Tony
Quoted 39 lines
Am 14.08.2019 um 11:47 schrieb Tony Lindgren <[email protected]>:
Quoted 26 lines · H. Nikolaus Schaller
I also have pushed good news to
https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/tree/letux-pvr
Thanks to the help from the Pyra community, I was able to get a (binary) reference implementation using DRM that works on Pyra/OMAP5. At least the gles1test1.
With that reference setup I was able to fix my Makefiles for the staging/pvr implementation.
I have tested that it works with v4.19.66 and v5.3-rc4 (LPAE build of the LetuxOS kernel tree) on the Pyra.
In which areas does this tree go beyond the TI SDK/IMG DDK 1.14?
* includes internal API fixes for kernels up to v5.3
* lives indrivers/staging/pvr/1.14.3699939- so that we can ask for inclusion in linux-next
* hasKconfigand Makefiles for in-kernel configuration (no separate build system)
* builds separate kernel modules for omap3430, omap3630, am335x, omap4, omap5, dra7 etc. pvrsrvkm
e.g.pvrsrvkm_omap_omap5_sgx544_116
* the correct kernel module is automatically probed by matching .compatible in device tree so that the code is multi-platform friendly
* includes SoC integration for OMAP3/4/5 and has some preliminary bindings documentation
* code base should also support JZ4780/CI20 and some Intel Atom processors (CedarView, Poulsbo)
* has got a ToDo to describe what should be done during staging phaseQuoted 8 lines
My plans for the next steps are:
* do more testing (e.g. X11, kmscube)
* check if and/or how it can run on am335x (BeagleBone) or OMAP3 (e.g. GTA04, OpenPandora)
* try a JZ480/CI20 build (unfortuantely I have no HDMI there with mainline kernels and I am missing the user-space libraries for MIPS).
Quoted 7 lines
That sounds good to me, just one comment. Before getting these into staging, I'd like to have omap variants use proper interconnect target module in devicetree like we already have in
omap4.dtsias target-module@56000000. This should simplify things further as the module child device driver(s) can just enable things with runtime PM and we can leave out all the legacy hwmod platform data that sounds like you're still carrying.
Yes, there is still a lot of SoC-glue included:
https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/commits/letux/omap-pvr-soc-glue
It would indeed be a good move to simplify and reduce the glue code and make it more maintainable / stable / identical on different platforms.
Quoted 6 lines
I have patches here to add similar interconnect target modules for at least omap34xx, omap36xx, omap5, and am335x that I'll try to post later on today to play with. For am335x, things still depend on the recentely posted prm rstctrl patches. I'm not sure if I already did a dts patch for dra7 yet, need to check.
I assume it is not yet in linux-next... So something for v5.5 or later.
BR and thanks,
Nikolaus
Quoted 47 lines · H. Nikolaus Schaller
Quoted 39 lines
Am 14.08.2019 um 11:47 schrieb Tony Lindgren <[email protected]>:
Quoted 26 lines · H. Nikolaus Schaller
I also have pushed good news to
https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/tree/letux-pvr
Thanks to the help from the Pyra community, I was able to get a (binary) reference implementation using DRM that works on Pyra/OMAP5. At least the gles1test1.
With that reference setup I was able to fix my Makefiles for the staging/pvr implementation.
I have tested that it works with v4.19.66 and v5.3-rc4 (LPAE build of the LetuxOS kernel tree) on the Pyra.
In which areas does this tree go beyond the TI SDK/IMG DDK 1.14?
* includes internal API fixes for kernels up to v5.3
* lives indrivers/staging/pvr/1.14.3699939- so that we can ask for inclusion in linux-next
* hasKconfigand Makefiles for in-kernel configuration (no separate build system)
* builds separate kernel modules for omap3430, omap3630, am335x, omap4, omap5, dra7 etc. pvrsrvkm
e.g.pvrsrvkm_omap_omap5_sgx544_116
* the correct kernel module is automatically probed by matching .compatible in device tree so that the code is multi-platform friendly
* includes SoC integration for OMAP3/4/5 and has some preliminary bindings documentation
* code base should also support JZ4780/CI20 and some Intel Atom processors (CedarView, Poulsbo)
* has got a ToDo to describe what should be done during staging phaseQuoted 8 lines
My plans for the next steps are:
* do more testing (e.g. X11, kmscube)
* check if and/or how it can run on am335x (BeagleBone) or OMAP3 (e.g. GTA04, OpenPandora)
* try a JZ480/CI20 build (unfortuantely I have no HDMI there with mainline kernels and I am missing the user-space libraries for MIPS).Quoted 7 lines
That sounds good to me, just one comment. Before getting these into staging, I'd like to have omap variants use proper interconnect target module in devicetree like we already have in
omap4.dtsias target-module@56000000. This should simplify things further as the module child device driver(s) can just enable things with runtime PM and we can leave out all the legacy hwmod platform data that sounds like you're still carrying.
Quoted 6 lines
Yes, there is still a lot of SoC-glue included:
https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/commits/letux/omap-pvr-soc-glue
It would indeed be a good move to simplify and reduce the glue code and make it more maintainable / stable / identical on different platforms.
OK yeah all that should just disappear :)
Quoted 7 lines
Quoted 5 lines
I have patches here to add similar interconnect target modules for at least omap34xx, omap36xx, omap5, and am335x that I'll try to post later on today to play with. For am335x, things still depend on the recentely posted prm rstctrl patches. I'm not sure if I already did a dts patch for dra7 yet, need to check.
I assume it is not yet in linux-next... So something for v5.5 or later.
Well I just posted some sgx interconnect target module patches. We might still have them in v5.4 assuming people manage to review and test them.
Regards,
Tony
Quoted 67 lines · Tony Lindgren
Quoted 50 lines · H. Nikolaus Schaller
Quoted 42 lines
Am 14.08.2019 um 11:47 schrieb Tony Lindgren <[email protected]>:
Quoted 26 lines · H. Nikolaus Schaller
I also have pushed good news to
https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/tree/letux-pvr
Thanks to the help from the Pyra community, I was able to get a (binary) reference implementation using DRM that works on Pyra/OMAP5. At least the gles1test1.
With that reference setup I was able to fix my Makefiles for the staging/pvr implementation.
I have tested that it works with v4.19.66 and v5.3-rc4 (LPAE build of the LetuxOS kernel tree) on the Pyra.
In which areas does this tree go beyond the TI SDK/IMG DDK 1.14?
* includes internal API fixes for kernels up to v5.3
* lives indrivers/staging/pvr/1.14.3699939- so that we can ask for inclusion in linux-next
* hasKconfigand Makefiles for in-kernel configuration (no separate build system)
* builds separate kernel modules for omap3430, omap3630, am335x, omap4, omap5, dra7 etc. pvrsrvkm
e.g.pvrsrvkm_omap_omap5_sgx544_116
* the correct kernel module is automatically probed by matching .compatible in device tree so that the code is multi-platform friendly
* includes SoC integration for OMAP3/4/5 and has some preliminary bindings documentation
* code base should also support JZ4780/CI20 and some Intel Atom processors (CedarView, Poulsbo)
* has got a ToDo to describe what should be done during staging phaseQuoted 8 lines
My plans for the next steps are:
* do more testing (e.g. X11, kmscube)
* check if and/or how it can run on am335x (BeagleBone) or OMAP3 (e.g. GTA04, OpenPandora)
* try a JZ480/CI20 build (unfortuantely I have no HDMI there with mainline kernels and I am missing the user-space libraries for MIPS).Quoted 7 lines
That sounds good to me, just one comment. Before getting these into staging, I'd like to have omap variants use proper interconnect target module in devicetree like we already have in
omap4.dtsias target-module@56000000. This should simplify things further as the module child device driver(s) can just enable things with runtime PM and we can leave out all the legacy hwmod platform data that sounds like you're still carrying.Quoted 6 lines
Yes, there is still a lot of SoC-glue included:
https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/commits/letux/omap-pvr-soc-glue
It would indeed be a good move to simplify and reduce the glue code and make it more maintainable / stable / identical on different platforms.
OK yeah all that should just disappear :)
Quoted 6 lines
Quoted 5 lines
I have patches here to add similar interconnect target modules for at least omap34xx, omap36xx, omap5, and am335x that I'll try to post later on today to play with. For am335x, things still depend on the recentely posted prm rstctrl patches. I'm not sure if I already did a dts patch for dra7 yet, need to check.
Quoted 4 lines
Quoted 1 line
I assume it is not yet in linux-next... So something for v5.5 or later.
Well I just posted some sgx interconnect target module patches. We might still have them in v5.4 assuming people manage to review and test them.
Nikolaus,
I tested Tony's change and I can confirm that I can read the value when enabled. Should I apply his patches to your branch before I test, or is it go too to go as-is? I've got an AM3517, OMAP35 and a DM3730. I am not sure if the AM3517 is even on the radar, but it has an sgx530 as well.
adam
Quoted 4 lines
Regards,
Tony
Quoted 11 lines · Adam Ford
Quoted 2 lines · Tony Lindgren
Well I just posted some sgx interconnect target module patches. We might still have them in v5.4 assuming people manage to review and test them.
Nikolaus,
I tested Tony's change and I can confirm that I can read the value when enabled. Should I apply his patches to your branch before I test, or is it go too to go as-is? I've got an AM3517, OMAP35 and a DM3730. I am not sure if the AM3517 is even on the radar, but it has an sgx530 as well.
My estimate is am3517 is wired the same way as omap34xx with a 60% chance, then 30% chance it's wired the same way as omap36xx, and then 10% chance for similar wiring to am335x.. So hopefully that leaves 0% chance for yet something different for it's wiring :)
If you have a chance please give it a try. Also check the TRM for the sgx sysconfig register bits to see which of the above matches, and if 3517 has a related rstctrl register like am335x has.
Regards,
Tony
Quoted 14 lines · Tony Lindgren
Quoted 11 lines · Adam Ford
Quoted 2 lines · Tony Lindgren
Well I just posted some sgx interconnect target module patches. We might still have them in v5.4 assuming people manage to review and test them.
Nikolaus,
I tested Tony's change and I can confirm that I can read the value when enabled. Should I apply his patches to your branch before I test, or is it go too to go as-is? I've got an AM3517, OMAP35 and a DM3730. I am not sure if the AM3517 is even on the radar, but it has an sgx530 as well.
Quoted 4 lines
My estimate is am3517 is wired the same way as omap34xx with a 60% chance, then 30% chance it's wired the same way as omap36xx, and then 10% chance for similar wiring to am335x.. So hopefully that leaves 0% chance for yet something different for it's wiring :)
Based on [1], I went under the assumption it was wired like the omap34xx. I applied your omap34 patches to the am3517.dtsi, and I was able to get the same response as I did for the omap3530. Do you want me to post the patches to the mailing list, or do you want to do it?
adam
Quoted 8 lines
If you have a chance please give it a try. Also check the TRM for the sgx sysconfig register bits to see which of the above matches, and if 3517 has a related rstctrl register like am335x has.
Regards,
Tony
Quoted 20 lines · Adam Ford
Quoted 14 lines · Tony Lindgren
Quoted 11 lines · Adam Ford
Quoted 2 lines · Tony Lindgren
Well I just posted some sgx interconnect target module patches. We might still have them in v5.4 assuming people manage to review and test them.
Nikolaus,
I tested Tony's change and I can confirm that I can read the value when enabled. Should I apply his patches to your branch before I test, or is it go too to go as-is? I've got an AM3517, OMAP35 and a DM3730. I am not sure if the AM3517 is even on the radar, but it has an sgx530 as well.
Quoted 4 lines
My estimate is am3517 is wired the same way as omap34xx with a 60% chance, then 30% chance it's wired the same way as omap36xx, and then 10% chance for similar wiring to am335x.. So hopefully that leaves 0% chance for yet something different for it's wiring :)
Quoted 4 lines
Based on [1], I went under the assumption it was wired like the omap34xx. I applied your omap34 patches to the
am3517.dtsi, and I was able to get the same response as I did for the omap3530. Do you want me to post the patches to the mailing list, or do you want to do it?
OK great, yeah please post patches :)
Thanks,
TOny
Hi Adam,
Quoted 8 lines
Am 17.08.2019 um 01:01 schrieb Adam Ford <[email protected]>:
Nikolaus,
I tested Tony's change and I can confirm that I can read the value when enabled. Should I apply his patches to your branch before I test, or is it go too to go as-is?
My branch is currently as-is and not aware of Tony's patches and based on v5.3-rc3. I think I will have to remove some glue code which tries to do the platform reset and enables clocks and replace by pm_runtime_get_sync() before it fits together. Then we can likely remove the omap-pvr-soc-glue branch at least partially and/or replace by Tony's patches before they arrive in mainline.
The current status of my branch is that it works on OMAP5/Pyra but a quick test on BeagleBone or GTA04 did show some reset/clock errors and it did not more than creating /proc/pvr. pvrsrvctl --start did fail.
Which means that the omap-pvr-soc-glue patches are currently broken with 5.3-rc3 anyways...
I'll look at it as soon as possible.
Quoted 3 lines
I've got an AM3517, OMAP35 and a
DM3730. I am not sure if the AM3517 is even on the radar, but it has an sgx530 as well.
Good to know and keep in mind.
BR,
Nikolaus
Quoted 51 lines · H. Nikolaus Schaller
Hi all,
Quoted 40 lines
Am 17.07.2019 um 12:51 schrieb Merlijn Wajer <[email protected]>:
Hi,
Quoted 18 lines · H. Nikolaus Schaller
Quoted 18 lines
Am 10.03.2019 um 00:14 schrieb Merlijn Wajer <[email protected]>:
Hi,
Quoted 10 lines · H. Nikolaus Schaller
Quoted 5 lines
Quoted 2 lines
At least I can download and start firmware. I just have to find a way to fix the omaplfb so that it works with our omapdrm based panels to runs the CLipBlit test [1] on modern kernels...
Maybe you can compare with what we have here:
https://github.com/maemo-leste/n9xx-linux/tree/pvr-wip-4.15.7/drivers/gpu/pvrI'll take a look into it especially how omaplfb is done.
First observation is that there is a "flat" tree while I am working on a structured one... But that is just a marginal difference (mainly significant for
Makefilewriters).Quoted 7 lines
Quoted 5 lines
I've ported the Maemo Leste kernel + pvr to 5.0 and it seems to work:
https://github.com/maemo-leste/n9xx-linux/commits/pvr-wip-5.0.yShould I add this as maemo-leste-n900-5.0 branch (or something) to
https://github.com/openpvrsgx-devgroup/linux_openpvrsgx ?Yes, that would be nice to be able to easily compare stuff.
I've just pushed the Maemo Leste v5.1 branch + patches here:
https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/tree/n900/v5.1-patch
This works on N900 with X, but it doesn't use DRM yet. I'm wondering what a next logical step would be: to try and modules to load/probe on another device (I have a droid4 or a Pandaboard ES rev B1), or to try and get DRM PowerVR to work on the N900, with omapdrmfb and dri3wsegl.
Quoted 7 lines
For either path, I'll probably need some help. Any updates from anyone else? Maybe we should list things people can work - perhaps document progress in github issues. (Mailing list is also fine, BTW)
Cheers,
Merlijn
Quoted 6 lines
I also have pushed good news to
https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/tree/letux-pvr
Thanks to the help from the Pyra community, I was able to get a (binary) reference implementation using DRM that works on Pyra/OMAP5. At least the gles1test1.
just a question,
If DRM is working, does that mean it works without needing the overhead of X?
adam
Quoted 32 lines
With that reference setup I was able to fix my Makefiles for the staging/pvr implementation.
I have tested that it works with v4.19.66 and v5.3-rc4 (LPAE build of the LetuxOS kernel tree) on the Pyra.
In which areas does this tree go beyond the TI SDK/IMG DDK 1.14?
* includes internal API fixes for kernels up to v5.3
* lives indrivers/staging/pvr/1.14.3699939- so that we can ask for inclusion in linux-next
* hasKconfigand Makefiles for in-kernel configuration (no separate build system)
* builds separate kernel modules for omap3430, omap3630, am335x, omap4, omap5, dra7 etc. pvrsrvkm
e.g.pvrsrvkm_omap_omap5_sgx544_116
* the correct kernel module is automatically probed by matching .compatible in device tree so that the code is multi-platform friendly
* includes SoC integration for OMAP3/4/5 and has some preliminary bindings documentation
* code base should also support JZ4780/CI20 and some Intel Atom processors (CedarView, Poulsbo)
* has got a ToDo to describe what should be done during staging phaseMy plans for the next steps are:
* do more testing (e.g. X11, kmscube)
* check if and/or how it can run on am335x (BeagleBone) or OMAP3 (e.g. GTA04, OpenPandora)
* try a JZ480/CI20 build (unfortuantely I have no HDMI there with mainline kernels and I am missing the user-space libraries for MIPS).BR,
Nikolaus
Quoted 9 lines
Am 19.08.2019 um 21:43 schrieb Adam Ford <[email protected]>:
Quoted 2 lines
Thanks to the help from the Pyra community, I was able to get a (binary) reference implementation using DRM that works on Pyra/OMAP5. At least the gles1test1.
just a question,
If DRM is working, does that mean it works without needing the overhead of X?
Yes, we have to kill X11 to successfully run the gles1test1. An interesting question will be how to mix both... E.g. have a 3D rendering in a window controlled by some window manager.
Hi,
Quoted 6 lines · H. Nikolaus Schaller
Quoted 6 lines
Am 19.08.2019 um 21:43 schrieb Adam Ford <[email protected]>:
Quoted 2 lines
Thanks to the help from the Pyra community, I was able to get a (binary) reference implementation using DRM that works on Pyra/OMAP5. At least the gles1test1.
Quoted 8 lines
Quoted 3 lines
just a question,
If DRM is working, does that mean it works without needing the overhead of X?
Yes, we have to kill X11 to successfully run the gles1test1. An interesting question will be how to mix both... E.g. have a 3D rendering in a window controlled by some window manager.
This is probably what you want to look at / start with:
https://github.com/TexasInstruments/dri3wsegl
Cheers,
Merlijn
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi,
Quoted 24 lines · H. Nikolaus Schaller
Hi all,
with the arrival of v5.4-rc1 some of Tony's sysc patches have arrived upstream, so we do no longer need them here.Therefore, I have rebased my
drivers/staging/pvrdriver [1] and fixed some more issues:
* omap4 build only needs to distinguish between omap4420/30/60 and omap4470, because the latter has an sgx544 inside and the other sgx540 This is solved by creating a newomap4470.dts
* I have added proper reg values and interrupts to the omap4 device tree node of the sgx (child node of the target-module)
* some updates to my sgxdump and sgxdemo scripts (assuming simple Debian Stretch rootfs)
* James Hilliard has contributed a fix forosfunc.c
* omap2plus also needs to be configured for STAGING and PREEMPT to be able to compile the driver
* I have added the__always_inlinefix [2] which is needed for v5.4 withCONFIG_CC_OPTIMIZE_FOR_SIZE=y(which I are enabled on the Letux builds)Unfortunately Tero's rstctrl patches did not yet make it upstream (or even linux-next) so I also have a copy in this branch.
Results of first testing are:
* OMAP3530 (OpenPandora, BeagleBoard C): fails with
Quoted 8 lines
[ 559.247558] PVR_K:(Error): SysLocateDevices: platform_get_resource failed* DM3730 (GTA04, BeagleBoard XM): kernel module loads
* OMAP4460 (Pandaboard ES): kernel module loads
* AM335x (BeagleBoneBlack): reports a problem with
omap_reset_deassert:[ 204.246706] omap_reset_deassert: timedout waiting for gfx:0
Please try with Tero's current github branch at github.com/t-kristo/linux-pm.git 5.4-rc1-ipc from few days ago, the earlier versions had still issues.
Quoted 3 lines
* OMAP5 (Pyra): fails to enable the clocks (did work with the previous version)
[ 304.140363] clock-controller:clk:0000:0: failed to enable [ 304.147388] PVR_K:(Error): EnableSGXClocks: pm_runtime_get_sync failed (16)
Hmm no idea what might be up with this one. Did some clkctrl clock fixes maybe cause a regression here? Tero do you have any ideas?
Quoted 21 lines
* OMAP5 with
omap2plus_defconfig:root@letux:~# echo on > $(find /sys -name control | grep \/5600) [ 213.490926] clock-controller:clk:0000:0: failed to enable root@letux:~#* pvrsrvctl --start --no-module:
reports (where the kernel module loads) that the uKernel does not runSo I have several ideas what the reasons for the problems on the non-omap5 devices could be:
* initial code may have some omap5 specific hack inside
* or has omap5 specific magic constants
* uKernel may "know" on which platform it runs and
we would need differently patched user-space code
for each one
* omap5 has a dual core sgx544 while the other
have single core
* the register address translation is not yet correct and
this inhibits communicating of the user-space libs
with the uKernel
Quoted 3 lines
Maybe, if someone can point me to a complete and working BeagleBone source tree (any kernel release) which makes use of 1.14.3699939 SDK, I could compare code and address setup to find what makes the difference.
Regards,
Tony
Quoted 5 lines
Am 07.10.2019 um 17:52 schrieb Tony Lindgren <[email protected]>:
Hi,
Quoted 8 lines
Quoted 4 lines · H. Nikolaus Schaller
* AM335x (BeagleBoneBlack): reports a problem with
omap_reset_deassert:[ 204.246706] omap_reset_deassert: timedout waiting for gfx:0Please try with Tero's current github branch at github.com/t-kristo/linux-pm.git 5.4-rc1-ipc from few days ago, the earlier versions had still issues.
I have seen there has been a new version today and I'll try that one asap.
Quoted 7 lines
Quoted 4 lines
* OMAP5 (Pyra): fails to enable the clocks (did work with the previous version)
[ 304.140363] clock-controller:clk:0000:0: failed to enable [ 304.147388] PVR_K:(Error): EnableSGXClocks: pm_runtime_get_sync failed (16)Hmm no idea what might be up with this one. Did some clkctrl clock fixes maybe cause a regression here? Tero do you have any ideas?
BR and thanks,
Nikolaus
Quoted 31 lines · Tony Lindgren
Hi,
Quoted 28 lines · H. Nikolaus Schaller
Hi all,
with the arrival of v5.4-rc1 some of Tony's sysc patches have arrived upstream, so we do no longer need them here.Therefore, I have rebased my
drivers/staging/pvrdriver [1] and fixed some more issues:
* omap4 build only needs to distinguish between omap4420/30/60 and omap4470, because the latter has an sgx544 inside and the other sgx540 This is solved by creating a newomap4470.dts
* I have added proper reg values and interrupts to the omap4 device tree node of the sgx (child node of the target-module)
* some updates to my sgxdump and sgxdemo scripts (assuming simple Debian Stretch rootfs)
* James Hilliard has contributed a fix forosfunc.c
* omap2plus also needs to be configured for STAGING and PREEMPT to be able to compile the driver
* I have added the__always_inlinefix [2] which is needed for v5.4 withCONFIG_CC_OPTIMIZE_FOR_SIZE=y(which I are enabled on the Letux builds)Unfortunately Tero's rstctrl patches did not yet make it upstream (or even linux-next) so I also have a copy in this branch.
Results of first testing are:
* OMAP3530 (OpenPandora, BeagleBoard C): fails with[ 559.247558] PVR_K:(Error): SysLocateDevices: platform_get_resource failed* DM3730 (GTA04, BeagleBoard XM): kernel module loads
Quoted 7 lines
Quoted 4 lines
* OMAP4460 (Pandaboard ES): kernel module loads
* AM335x (BeagleBoneBlack): reports a problem with
omap_reset_deassert:[ 204.246706] omap_reset_deassert: timedout waiting for gfx:0Please try with Tero's current github branch at github.com/t-kristo/linux-pm.git 5.4-rc1-ipc from few days ago, the earlier versions had still issues.
Yeah, this one should be fixed now.
Quoted 7 lines
Quoted 4 lines
* OMAP5 (Pyra): fails to enable the clocks (did work with the previous version)
[ 304.140363] clock-controller:clk:0000:0: failed to enable [ 304.147388] PVR_K:(Error): EnableSGXClocks: pm_runtime_get_sync failed (16)Hmm no idea what might be up with this one. Did some clkctrl clock fixes maybe cause a regression here? Tero do you have any ideas?
So, this one I am not too sure, I haven't looked at omap5 graphics clocking. I don't think it has anything to do with reset handling though.
Is there some simple way to try this out on board; without PVR module that is?
-Tero
Quoted 22 lines
Quoted 22 lines
* OMAP5 with
omap2plus_defconfig:root@letux:~# echo on > $(find /sys -name control | grep \/5600) [ 213.490926] clock-controller:clk:0000:0: failed to enable root@letux:~#* pvrsrvctl --start --no-module:
reports (where the kernel module loads) that the uKernel does not runSo I have several ideas what the reasons for the problems on the non-omap5 devices could be:
* initial code may have some omap5 specific hack inside
* or has omap5 specific magic constants
* uKernel may "know" on which platform it runs and
we would need differently patched user-space code
for each one
* omap5 has a dual core sgx544 while the other
have single core
* the register address translation is not yet correct and
this inhibits communicating of the user-space libs
with the uKernel
Quoted 10 lines
Quoted 3 lines
Maybe, if someone can point me to a complete and working BeagleBone source tree (any kernel release) which makes use of 1.14.3699939 SDK, I could compare code and address setup to find what makes the difference.
Regards,
Tony
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Hi Tero,
Quoted 9 lines
Am 07.10.2019 um 21:18 schrieb Tero Kristo <[email protected]>:
Quoted 4 lines · Tony Lindgren
Hi,
* H. Nikolaus Schaller <[email protected]> [191005 16:59]:
Please try with Tero's current github branch at github.com/t-kristo/linux-pm.git 5.4-rc1-ipc from few days ago, the earlier versions had still issues.Yeah, this one should be fixed now.
Ok! Will try asap.
Quoted 10 lines
Quoted 6 lines
Quoted 4 lines
* OMAP5 (Pyra): fails to enable the clocks (did work with the previous version)
[ 304.140363] clock-controller:clk:0000:0: failed to enable [ 304.147388] PVR_K:(Error): EnableSGXClocks: pm_runtime_get_sync failed (16)Hmm no idea what might be up with this one. Did some clkctrl clock fixes maybe cause a regression here? Tero do you have any ideas?
So, this one I am not too sure, I haven't looked at omap5 graphics clocking. I don't think it has anything to do with reset handling though.
Is there some simple way to try this out on board; without PVR module that is?
Yes, I have also seen it when just running the commands in the original commit message [1]:
# echo on > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe00 # OCP Revision 0x5600fe00 = 0x40000000 # echo auto > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe10 # rwmem 0x56000024
But I have not yet tested with 5.4-rc2, just 5.4-rc1.
BR and thanks,
Nikolaus
Quoted 27 lines · H. Nikolaus Schaller
Hi Tero,
Quoted 9 lines
Am 07.10.2019 um 21:18 schrieb Tero Kristo <[email protected]>:
Quoted 4 lines · Tony Lindgren
Hi,
* H. Nikolaus Schaller <[email protected]> [191005 16:59]:
Please try with Tero's current github branch at github.com/t-kristo/linux-pm.git 5.4-rc1-ipc from few days ago, the earlier versions had still issues.Yeah, this one should be fixed now.
Ok! Will try asap.
Quoted 10 lines
Quoted 6 lines
Quoted 4 lines
* OMAP5 (Pyra): fails to enable the clocks (did work with the previous version)
[ 304.140363] clock-controller:clk:0000:0: failed to enable [ 304.147388] PVR_K:(Error): EnableSGXClocks: pm_runtime_get_sync failed (16)Hmm no idea what might be up with this one. Did some clkctrl clock fixes maybe cause a regression here? Tero do you have any ideas?
So, this one I am not too sure, I haven't looked at omap5 graphics clocking. I don't think it has anything to do with reset handling though.
Is there some simple way to try this out on board; without PVR module that is?
Yes, I have also seen it when just running the commands in the original commit message [1]:
Quoted 8 lines
# echo on > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe00 # OCP Revision 0x5600fe00 = 0x40000000 # echo auto > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe10 # rwmem 0x56000024But I have not yet tested with 5.4-rc2, just 5.4-rc1.
Ok, there is a one liner DTS data fix for this issue, attached.
-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Quoted 1 line
From
57f9fecb167c0ef9f1ae2a1aa93a05ca8add52a2Mon Sep 17 00:00:00 2001
From: Tero Kristo <[email protected]>
Date: Tue, 8 Oct 2019 10:56:42 +0300
Subject: [PATCH 1/1] ARM: dts: omap5: fix gpu_cm clock provider name
The clkctrl code searches for the parent clockdomain based on the name of the CM provider node. The introduction of SGX node for omap5 made the node name for the gpu_cm to be clock-controller. There is no clockdomain named like this, so the lookup fails. Fix by changing the node name properly.
--- arch/arm/boot/dts/omap54xx-clocks.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/omap54xx-clocks.dtsi +1 -1
@@ -1160,7 +1160,7 @@ }; }; - gpu_cm: clock-controller@1500 { + gpu_cm: gpu_cm@1500 { compatible = "ti,omap4-cm"; reg = <0x1500 0x100>; #address-cells = <1>;
Signature · 1 line
2.17.1
Quoted 35 lines · Tero Kristo
Quoted 34 lines · H. Nikolaus Schaller
Hi Tero,
Quoted 9 lines
Am 07.10.2019 um 21:18 schrieb Tero Kristo <[email protected]>:
Quoted 4 lines · Tony Lindgren
Hi,
* H. Nikolaus Schaller <[email protected]> [191005 16:59]:
Please try with Tero's current github branch at github.com/t-kristo/linux-pm.git 5.4-rc1-ipc from few days ago, the earlier versions had still issues.Yeah, this one should be fixed now.
Ok! Will try asap.
Quoted 10 lines
Quoted 6 lines
Quoted 4 lines
* OMAP5 (Pyra): fails to enable the clocks (did work with the previous version)
[ 304.140363] clock-controller:clk:0000:0: failed to enable [ 304.147388] PVR_K:(Error): EnableSGXClocks: pm_runtime_get_sync failed (16)Hmm no idea what might be up with this one. Did some clkctrl clock fixes maybe cause a regression here? Tero do you have any ideas?
So, this one I am not too sure, I haven't looked at omap5 graphics clocking. I don't think it has anything to do with reset handling though.
Is there some simple way to try this out on board; without PVR module that is?
Yes, I have also seen it when just running the commands in the original commit message [1]:
# echo on > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe00 # OCP Revision 0x5600fe00 = 0x40000000 # echo auto > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe10 # rwmem 0x56000024
Quoted 3 lines
Quoted 1 line
But I have not yet tested with 5.4-rc2, just 5.4-rc1.
Ok, there is a one liner DTS data fix for this issue, attached.
Arhg OK that thing again.. I must have changed node name while cleaning up the patch or something. Thanks, will apply into fixes.
Then for v5.5, we should start using custom compatible properties for the clock controller instances. I'll be posting a patch for that. Otherwise scripts/checkpatch.pl --strict type clean-up will cause unexpected issues.
Regards,
Tony
Quoted 33 lines
From
57f9fecb167c0ef9f1ae2a1aa93a05ca8add52a2Mon Sep 17 00:00:00 2001
From: Tero Kristo <[email protected]>
Date: Tue, 8 Oct 2019 10:56:42 +0300
Subject: [PATCH 1/1] ARM: dts: omap5: fixgpu_cmclock provider nameThe clkctrl code searches for the parent clockdomain based on the name of the CM provider node. The introduction of SGX node for omap5 made the node name for the
gpu_cmto be clock-controller. There is no clockdomain named like this, so the lookup fails. Fix by changing the node name properly.Fixes 394534cb07d8 ("ARM: dts: Configure sgx for omap5")Signed-off-by Tero Kristo <[email protected]>--- arch/arm/boot/dts/omap54xx-clocks.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/omap54xx-clocks.dtsi +1
-1@@ -1160,7 +1160,7 @@ }; }; - gpu_cm: clock-controller@1500 { + gpu_cm: gpu_cm@1500 { compatible = "ti,omap4-cm"; reg = <0x1500 0x100>; #address-cells = <1>;Signature · 1 line
2.17.1
Quoted 34 lines
Am 08.10.2019 um 10:00 schrieb Tero Kristo <[email protected]>:
Quoted 21 lines · H. Nikolaus Schaller
Hi Tero,
Quoted 9 lines
Am 07.10.2019 um 21:18 schrieb Tero Kristo <[email protected]>:
Quoted 4 lines · Tony Lindgren
Hi,
* H. Nikolaus Schaller <[email protected]> [191005 16:59]:
Please try with Tero's current github branch at github.com/t-kristo/linux-pm.git 5.4-rc1-ipc from few days ago, the earlier versions had still issues.Yeah, this one should be fixed now.
Ok! Will try asap.
Quoted 10 lines
Quoted 6 lines
Quoted 4 lines
* OMAP5 (Pyra): fails to enable the clocks (did work with the previous version)
[ 304.140363] clock-controller:clk:0000:0: failed to enable [ 304.147388] PVR_K:(Error): EnableSGXClocks: pm_runtime_get_sync failed (16)Hmm no idea what might be up with this one. Did some clkctrl clock fixes maybe cause a regression here? Tero do you have any ideas?
So, this one I am not too sure, I haven't looked at omap5 graphics clocking. I don't think it has anything to do with reset handling though.
Is there some simple way to try this out on board; without PVR module that is?
Quoted 8 lines
Yes, I have also seen it when just running the commands in the original commit message [1]:
# echo on > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe00 # OCP Revision 0x5600fe00 = 0x40000000 # echo auto > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe10 # rwmem 0x56000024 But I have not yet tested with 5.4-rc2, just 5.4-rc1.
Quoted 1 line
Ok, there is a one liner DTS data fix for this issue, attached.
Yes, have tested and it fixes omap5. I have the 3D demo running again on the Pyra. Yay!
Together with the latest rstcrtl patches, am335x is now better. No omap_reset_deassert: timedout waiting for gfx:0 any more.
But I can't access the sgx registers and get memory faults. Maybe my script has a bug and is trying the wrong address. Have to check with some distance...
I have also tested omap3630 and omap4460 and they are not worse, but also not better. So I think the foundation for sgx clock and reset is now ok.
BR and thanks,
Nikolaus
Quoted 39 lines
Am 08.10.2019 um 22:15 schrieb H. Nikolaus Schaller <[email protected]>:
Quoted 33 lines
Am 08.10.2019 um 10:00 schrieb Tero Kristo <[email protected]>:
Quoted 21 lines · H. Nikolaus Schaller
Hi Tero,
Quoted 9 lines
Am 07.10.2019 um 21:18 schrieb Tero Kristo <[email protected]>:
Quoted 4 lines · Tony Lindgren
Hi,
* H. Nikolaus Schaller <[email protected]> [191005 16:59]:
Please try with Tero's current github branch at github.com/t-kristo/linux-pm.git 5.4-rc1-ipc from few days ago, the earlier versions had still issues.Yeah, this one should be fixed now.
Ok! Will try asap.
Quoted 10 lines
Quoted 6 lines
Quoted 4 lines
* OMAP5 (Pyra): fails to enable the clocks (did work with the previous version)
[ 304.140363] clock-controller:clk:0000:0: failed to enable [ 304.147388] PVR_K:(Error): EnableSGXClocks: pm_runtime_get_sync failed (16)Hmm no idea what might be up with this one. Did some clkctrl clock fixes maybe cause a regression here? Tero do you have any ideas?
So, this one I am not too sure, I haven't looked at omap5 graphics clocking. I don't think it has anything to do with reset handling though.
Is there some simple way to try this out on board; without PVR module that is?
Quoted 8 lines
Yes, I have also seen it when just running the commands in the original commit message [1]:
# echo on > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe00 # OCP Revision 0x5600fe00 = 0x40000000 # echo auto > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe10 # rwmem 0x56000024 But I have not yet tested with 5.4-rc2, just 5.4-rc1.Quoted 1 line
Ok, there is a one liner DTS data fix for this issue, attached.
Quoted 8 lines
Yes, have tested and it fixes omap5. I have the 3D demo running again on the Pyra. Yay!
Together with the latest rstcrtl patches, am335x is now better. No
omap_reset_deassert: timedout waiting for gfx:0 any more.But I can't access the sgx registers and get memory faults. Maybe my script has a bug and is trying the wrong address. Have to check with some distance...
Now I have done more tests on am335x. It is not my script but something else.
Trying to read 0x5600fe00 after doing
echo on > /sys/bus/platform/devices/5600fe00.target-module/power/control
gives page faults.
When trying to load the kernel driver, the omap_reset_deassert message has gone but the driver does no initialize:
root@letux:~# modprobe pvrsrvkm_omap_am335x_sgx530_125 [ 45.774712] pvrsrvkm_omap_am335x_sgx530_125: module is from the staging directory, the quality is unknown, you have been warned. root@letux:~#
Here is the CM/PM register dump after enabling power/control
*** SGX Register Dump ***0x44E00900 00000301 CM_GFX_L3_CLKSTCTRL0x44E00904 00050000 CM_GFX_GFX_CLKCTRL0x44E0090c 00000002 CM_GFX_L4LS_GFX_CLKSTCTR0x44E00910 00030000 CM_GFX_MMUCFG_CLKCTRL0x44E00914 00030000 CM_GFX_MMUDATA_CLKCTRL0x44E0052c 00000000 CM_DPLL.CLKSEL_GFX_FCLK0x44E01100 00060047 PM_GFX_PWRSTCTRL0x44E01104 00000001 RM_GFX_RSTCTRL0x44E01110 00000037 PM_GFX_PWRSTST
BR,
Nikolaus
Quoted 65 lines · H. Nikolaus Schaller
Quoted 39 lines
Am 08.10.2019 um 22:15 schrieb H. Nikolaus Schaller <[email protected]>:
Quoted 33 lines
Am 08.10.2019 um 10:00 schrieb Tero Kristo <[email protected]>:
Quoted 21 lines · H. Nikolaus Schaller
Hi Tero,
Quoted 9 lines
Am 07.10.2019 um 21:18 schrieb Tero Kristo <[email protected]>:
Quoted 4 lines · Tony Lindgren
Hi,
* H. Nikolaus Schaller <[email protected]> [191005 16:59]:
Please try with Tero's current github branch at github.com/t-kristo/linux-pm.git 5.4-rc1-ipc from few days ago, the earlier versions had still issues.Yeah, this one should be fixed now.
Ok! Will try asap.
Quoted 10 lines
Quoted 6 lines
Quoted 4 lines
* OMAP5 (Pyra): fails to enable the clocks (did work with the previous version)
[ 304.140363] clock-controller:clk:0000:0: failed to enable [ 304.147388] PVR_K:(Error): EnableSGXClocks: pm_runtime_get_sync failed (16)Hmm no idea what might be up with this one. Did some clkctrl clock fixes maybe cause a regression here? Tero do you have any ideas?
So, this one I am not too sure, I haven't looked at omap5 graphics clocking. I don't think it has anything to do with reset handling though.
Is there some simple way to try this out on board; without PVR module that is?
Quoted 8 lines
Yes, I have also seen it when just running the commands in the original commit message [1]:
# echo on > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe00 # OCP Revision 0x5600fe00 = 0x40000000 # echo auto > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe10 # rwmem 0x56000024 But I have not yet tested with 5.4-rc2, just 5.4-rc1.Quoted 1 line
Ok, there is a one liner DTS data fix for this issue, attached.
Quoted 8 lines
Yes, have tested and it fixes omap5. I have the 3D demo running again on the Pyra. Yay!
Together with the latest rstcrtl patches, am335x is now better. No
omap_reset_deassert: timedout waiting for gfx:0 any more.But I can't access the sgx registers and get memory faults. Maybe my script has a bug and is trying the wrong address. Have to check with some distance...
Now I have done more tests on am335x. It is not my script but something else.
Trying to read
0x5600fe00after doingecho on >
/sys/bus/platform/devices/5600fe00.target-module/power/controlgives page faults.
When trying to load the kernel driver, the
omap_reset_deassertmessage has gone but the driver does no initialize:root@letux:~# modprobe pvrsrvkm_omap_am335x_sgx530_125 [ 45.774712] pvrsrvkm_omap_am335x_sgx530_125: module is from the staging directory, the quality is unknown, you have been warned. root@letux:~#Here is the CM/PM register dump after enabling power/control
Quoted 10 lines
*** SGX Register Dump ***
0x44E0090000000301CM_GFX_L3_CLKSTCTRL0x44E0090400050000CM_GFX_GFX_CLKCTRL0x44E0090c00000002CM_GFX_L4LS_GFX_CLKSTCTR0x44E0091000030000CM_GFX_MMUCFG_CLKCTRL0x44E0091400030000CM_GFX_MMUDATA_CLKCTRL0x44E0052c00000000 CM_DPLL.CLKSEL_GFX_FCLK0x44E0110000060047PM_GFX_PWRSTCTRL0x44E0110400000001RM_GFX_RSTCTRL0x44E0111000000037PM_GFX_PWRSTST
Are you sure you have the graphics node properly applied in your kernel?
As you can see the RM_GFX_RSTCTRL is still asserted (it should be zero so that you can access the module) and the CM_GFX_GFX_CLKCTRL is also disabled (bits 0-1 are 0, should be 2 in the working case.)
It works for me with my branch + the single am33xx patch from Tony.
-Tero
Quoted 5 lines
BR,
Nikolaus
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Quoted 31 lines
Am 09.10.2019 um 15:55 schrieb Tero Kristo <[email protected]>:
Quoted 12 lines · H. Nikolaus Schaller
Quoted 6 lines
Am 08.10.2019 um 22:15 schrieb H. Nikolaus Schaller <[email protected]>:
But I can't access the sgx registers and get memory faults. Maybe my script has a bug and is trying the wrong address. Have to check with some distance...
Now I have done more tests on am335x. It is not my script but something else. Trying to read
0x5600fe00after doing
echo on >/sys/bus/platform/devices/5600fe00.target-module/power/controlgives page faults.
When trying to load the kernel driver, theomap_reset_deassertmessage has gone but the driver does no initialize:Quoted 14 lines
root@letux:~# modprobe pvrsrvkm_omap_am335x_sgx530_125 [ 45.774712] pvrsrvkm_omap_am335x_sgx530_125: module is from the staging directory, the quality is unknown, you have been warned. root@letux:~# Here is the CM/PM register dump after enabling power/control *** SGX Register Dump *** 0x44E00900 00000301 CM_GFX_L3_CLKSTCTRL 0x44E00904 00050000 CM_GFX_GFX_CLKCTRL 0x44E0090c 00000002 CM_GFX_L4LS_GFX_CLKSTCTR 0x44E00910 00030000 CM_GFX_MMUCFG_CLKCTRL 0x44E00914 00030000 CM_GFX_MMUDATA_CLKCTRL 0x44E0052c 00000000 CM_DPLL.CLKSEL_GFX_FCLK 0x44E01100 00060047 PM_GFX_PWRSTCTRL 0x44E01104 00000001 RM_GFX_RSTCTRL 0x44E01110 00000037 PM_GFX_PWRSTST
Quoted 1 line
Are you sure you have the graphics node properly applied in your kernel?
Not really... There are several patch sets which seem to be necessary (to support all omap variants) and I am not sure if I have them all and correctly.
I have collected these patches on top of v5.4-rc2:
272d7200c77a ARM: dts: omap5: fix gpu_cm clock provider name 96fa23010f2a dt-bindings: omap: add new binding for PRM instances a164172c1f40 soc: ti: add initial PRM driver with reset control support 42a5e4261993 soc: ti: omap-prm: poll for reset complete during de-assert 9237f39716be soc: ti: omap-prm: add support for denying idle for reset clockdomain bf2ae22e5bcf soc: ti: omap-prm: add omap4 PRM databe5cb64f10e0 soc: ti: omap-prm: add data for am33xx86646d7d79be soc: ti: omap-prm: add dra7 PRM datac3b5455dfd65 soc: ti: omap-prm: add am4 PRM datae26d4ff7ad15 soc: ti: omap-prm: add omap5 PRM data66369100d1fc clk: ti: am43xx: drop idlest polling from gfx clock d96899e143de bus: ti-sysc: re-order reset and main clock controls 45071446bd05 bus: ti-sysc: drop the extra hardreset during init 0da134c3aa9d bus: ti-sysc: avoid toggling power state of module during probe 17b70c96b539 ARM: OMAP2+: pdata-quirks: add PRM data for reset support af81a68c65d7 clk: ti: clkctrl: fix setting up clkctrl clocks d7dd7f44bce4 clk: ti: clkctrl: convert to use bit helper macros instead of bitops 42ee8270adfd clk: ti: clkctrl: add new exported API for checking standby info 218b39a8c851 dt-bindings: clk: add omap5 iva clkctrl definitions 41b6c466efde clk: ti: omap5: add IVA subsystem clkctrl data 38cfdebcc2f8 clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks 39e827b0dfe5 clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocks f4584f1e5bff clk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks 1c7f5871e5a0 clk: ti: am43xx: drop idlest polling from pruss clkctrl clock 53363c4cfb3d clk: ti: am33xx: drop idlest polling from pruss clkctrl clock 1907994ee9ce ARM: dts: omap5: add IVA clkctrl nodes8182f3f282de ARM: dts: dra7: add PRM nodesff2880fb99c7 ARM: dts: omap4: add PRM nodes4d49da48c458 ARM: dts: am33xx: Add PRM data325cffda2b2d ARM: dts: am43xx: Add PRM datab6ceeb4c5b74 ARM: dts: omap5: Add PRM data303b7b4bcc60 ARM: dts: dra7: convert IOMMUs to use ti-sysc d875126d92f7 ARM: dts: dra74x: convert IOMMUs to use ti-sysc 8f699534deb8 ARM: dts: omap4: convert IOMMUs to use ti-sysc b1ec9e25a686 ARM: dts: omap5: convert IOMMUs to use ti-sysc e90c0cc1e4a5 ARM: dts: Configure rstctrl reset for SGX
Quoted 1 line
As you can see the
RM_GFX_RSTCTRLis still asserted (it should be zero so that you can access the module) and theCM_GFX_GFX_CLKCTRLis also disabled (bits 0-1 are 0, should be 2 in the working case.)
Ok.
Quoted 2 lines
It works for me with my branch + the single am33xx patch from Tony.
Is there a link so that I can compare with the right version?
BR and thanks,
Nikolaus
Quoted 38 lines · H. Nikolaus Schaller
Quoted 31 lines
Am 09.10.2019 um 15:55 schrieb Tero Kristo <[email protected]>:
Quoted 12 lines · H. Nikolaus Schaller
Quoted 6 lines
Am 08.10.2019 um 22:15 schrieb H. Nikolaus Schaller <[email protected]>:
But I can't access the sgx registers and get memory faults. Maybe my script has a bug and is trying the wrong address. Have to check with some distance...
Now I have done more tests on am335x. It is not my script but something else. Trying to read
0x5600fe00after doing
echo on >/sys/bus/platform/devices/5600fe00.target-module/power/controlgives page faults.
When trying to load the kernel driver, theomap_reset_deassertmessage has gone but the driver does no initialize:Quoted 14 lines
root@letux:~# modprobe pvrsrvkm_omap_am335x_sgx530_125 [ 45.774712] pvrsrvkm_omap_am335x_sgx530_125: module is from the staging directory, the quality is unknown, you have been warned. root@letux:~# Here is the CM/PM register dump after enabling power/control *** SGX Register Dump *** 0x44E00900 00000301 CM_GFX_L3_CLKSTCTRL 0x44E00904 00050000 CM_GFX_GFX_CLKCTRL 0x44E0090c 00000002 CM_GFX_L4LS_GFX_CLKSTCTR 0x44E00910 00030000 CM_GFX_MMUCFG_CLKCTRL 0x44E00914 00030000 CM_GFX_MMUDATA_CLKCTRL 0x44E0052c 00000000 CM_DPLL.CLKSEL_GFX_FCLK 0x44E01100 00060047 PM_GFX_PWRSTCTRL 0x44E01104 00000001 RM_GFX_RSTCTRL 0x44E01110 00000037 PM_GFX_PWRSTSTQuoted 1 line
Are you sure you have the graphics node properly applied in your kernel?
Not really... There are several patch sets which seem to be necessary (to support all omap variants) and I am not sure if I have them all and correctly.
I have collected these patches on top of v5.4-rc2:
Quoted 11 lines
272d7200c77aARM: dts: omap5: fixgpu_cmclock provider name96fa23010f2adt-bindings: omap: add new binding for PRM instancesa164172c1f40soc: ti: add initial PRM driver with reset control support42a5e4261993soc: ti: omap-prm: poll for reset complete during de-assert9237f39716besoc: ti: omap-prm: add support for denying idle for reset clockdomainbf2ae22e5bcfsoc: ti: omap-prm: add omap4 PRM databe5cb64f10e0soc: ti: omap-prm: add data for am33xx86646d7d79besoc: ti: omap-prm: add dra7 PRM datac3b5455dfd65soc: ti: omap-prm: add am4 PRM datae26d4ff7ad15soc: ti: omap-prm: add omap5 PRM data66369100d1fcclk: ti: am43xx: drop idlest polling from gfx clock
You should have similar patch as above for am33xx. Otherwise it will probably fail probing the ti-sysc, resulting in the failure you see.
-Tero
Quoted 32 lines
d96899e143debus: ti-sysc: re-order reset and main clock controls45071446bd05bus: ti-sysc: drop the extra hardreset during init0da134c3aa9dbus: ti-sysc: avoid toggling power state of module during probe17b70c96b539ARM: OMAP2+: pdata-quirks: add PRM data for reset supportaf81a68c65d7clk: ti: clkctrl: fix setting up clkctrl clocksd7dd7f44bce4clk: ti: clkctrl: convert to use bit helper macros instead of bitops42ee8270adfdclk: ti: clkctrl: add new exported API for checking standby info218b39a8c851dt-bindings: clk: add omap5 iva clkctrl definitions41b6c466efdeclk: ti: omap5: add IVA subsystem clkctrl data38cfdebcc2f8clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks39e827b0dfe5clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocksf4584f1e5bffclk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks1c7f5871e5a0clk: ti: am43xx: drop idlest polling from pruss clkctrl clock53363c4cfb3dclk: ti: am33xx: drop idlest polling from pruss clkctrl clock1907994ee9ceARM: dts: omap5: add IVA clkctrl nodes8182f3f282deARM: dts: dra7: add PRM nodesff2880fb99c7ARM: dts: omap4: add PRM nodes4d49da48c458ARM: dts: am33xx: Add PRM data325cffda2b2dARM: dts: am43xx: Add PRM datab6ceeb4c5b74ARM: dts: omap5: Add PRM data303b7b4bcc60ARM: dts: dra7: convert IOMMUs to use ti-syscd875126d92f7ARM: dts: dra74x: convert IOMMUs to use ti-sysc8f699534deb8ARM: dts: omap4: convert IOMMUs to use ti-syscb1ec9e25a686ARM: dts: omap5: convert IOMMUs to use ti-sysce90c0cc1e4a5ARM: dts: Configure rstctrl reset for SGXQuoted 1 line
As you can see the
RM_GFX_RSTCTRLis still asserted (it should be zero so that you can access the module) and theCM_GFX_GFX_CLKCTRLis also disabled (bits 0-1 are 0, should be 2 in the working case.)Ok.
Quoted 1 line
Quoted 7 lines
Quoted 1 line
It works for me with my branch + the single am33xx patch from Tony.
Is there a link so that I can compare with the right version?
BR and thanks,
Nikolaus
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Quoted 50 lines
Am 09.10.2019 um 18:34 schrieb Tero Kristo <[email protected]>:
Quoted 31 lines · H. Nikolaus Schaller
Quoted 30 lines
Am 09.10.2019 um 15:55 schrieb Tero Kristo <[email protected]>:
Quoted 12 lines · H. Nikolaus Schaller
Quoted 6 lines
Am 08.10.2019 um 22:15 schrieb H. Nikolaus Schaller <[email protected]>:
But I can't access the sgx registers and get memory faults. Maybe my script has a bug and is trying the wrong address. Have to check with some distance...
Now I have done more tests on am335x. It is not my script but something else. Trying to read
0x5600fe00after doing
echo on >/sys/bus/platform/devices/5600fe00.target-module/power/controlgives page faults.
When trying to load the kernel driver, theomap_reset_deassertmessage has gone but the driver does no initialize:Quoted 14 lines
root@letux:~# modprobe pvrsrvkm_omap_am335x_sgx530_125 [ 45.774712] pvrsrvkm_omap_am335x_sgx530_125: module is from the staging directory, the quality is unknown, you have been warned. root@letux:~# Here is the CM/PM register dump after enabling power/control *** SGX Register Dump *** 0x44E00900 00000301 CM_GFX_L3_CLKSTCTRL 0x44E00904 00050000 CM_GFX_GFX_CLKCTRL 0x44E0090c 00000002 CM_GFX_L4LS_GFX_CLKSTCTR 0x44E00910 00030000 CM_GFX_MMUCFG_CLKCTRL 0x44E00914 00030000 CM_GFX_MMUDATA_CLKCTRL 0x44E0052c 00000000 CM_DPLL.CLKSEL_GFX_FCLK 0x44E01100 00060047 PM_GFX_PWRSTCTRL 0x44E01104 00000001 RM_GFX_RSTCTRL 0x44E01110 00000037 PM_GFX_PWRSTSTQuoted 1 line
Are you sure you have the graphics node properly applied in your kernel?
Quoted 14 lines
Not really... There are several patch sets which seem to be necessary (to support all omap variants) and I am not sure if I have them all and correctly. I have collected these patches on top of v5.4-rc2:
272d7200c77aARM: dts: omap5: fixgpu_cmclock provider name96fa23010f2adt-bindings: omap: add new binding for PRM instancesa164172c1f40soc: ti: add initial PRM driver with reset control support42a5e4261993soc: ti: omap-prm: poll for reset complete during de-assert9237f39716besoc: ti: omap-prm: add support for denying idle for reset clockdomainbf2ae22e5bcfsoc: ti: omap-prm: add omap4 PRM databe5cb64f10e0soc: ti: omap-prm: add data for am33xx86646d7d79besoc: ti: omap-prm: add dra7 PRM datac3b5455dfd65soc: ti: omap-prm: add am4 PRM datae26d4ff7ad15soc: ti: omap-prm: add omap5 PRM data66369100d1fcclk: ti: am43xx: drop idlest polling from gfx clock
Quoted 18 lines
You should have similar patch as above for am33xx. Otherwise it will probably fail probing the ti-sysc, resulting in the failure you see.
-Tero
Quoted 14 lines
d96899e143debus: ti-sysc: re-order reset and main clock controls45071446bd05bus: ti-sysc: drop the extra hardreset during init0da134c3aa9dbus: ti-sysc: avoid toggling power state of module during probe17b70c96b539ARM: OMAP2+: pdata-quirks: add PRM data for reset supportaf81a68c65d7clk: ti: clkctrl: fix setting up clkctrl clocksd7dd7f44bce4clk: ti: clkctrl: convert to use bit helper macros instead of bitops42ee8270adfdclk: ti: clkctrl: add new exported API for checking standby info218b39a8c851dt-bindings: clk: add omap5 iva clkctrl definitions41b6c466efdeclk: ti: omap5: add IVA subsystem clkctrl data38cfdebcc2f8clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks39e827b0dfe5clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocksf4584f1e5bffclk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks1c7f5871e5a0clk: ti: am43xx: drop idlest polling from pruss clkctrl clock53363c4cfb3dclk: ti: am33xx: drop idlest polling from pruss clkctrl clock
so the pattern of ^^^ but for gfx clock?
Yes, there seems to be
[PATCH 1/2] clk: ti: am33xx: drop idlest polling from gfx clock
which I am missing. Most likely, I accidentally did download from patchwork just a single patch (am43xx) and not the series...
With this patch added, I now have access to the sgx registers:
root@letux:~# ./sgxdump *** SGX Register Dump *** 0x44E00900 00000302 CM_GFX_L3_CLKSTCTRL 0x44E00904 00040002 CM_GFX_GFX_CLKCTRL 0x44E0090c 00000002 CM_GFX_L4LS_GFX_CLKSTCTR 0x44E00910 00030000 CM_GFX_MMUCFG_CLKCTRL 0x44E00914 00030000 CM_GFX_MMUDATA_CLKCTRL 0x44E0052c 00000000 CM_DPLL.CLKSEL_GFX_FCLK 0x44E01100 00060047 PM_GFX_PWRSTCTRL 0x44E01104 00000000 RM_GFX_RSTCTRL 0x44E01110 00000037 PM_GFX_PWRSTST 0x5600fe14 00000000 SGX_CORE_VERSION 0x5600fe00 40000000 OCP_REVISION 0x5600fe04 00000005 OCP_HWINFO 0x5600fe10 00000028 OCP_SYSCONFIG 0x5600fe24 00000000 OCP_IRQSTATUS_RA_0 0x5600fe28 00000000 OCP_IRQSTATUS_RA_1 0x5600fe2c 00000000 OCP_IRQSTATUS_RA_2 0x5600fe30 00000000 OCP_IRQSTATUS_0 0x5600fe34 00000000 OCP_IRQSTATUS_1 0x5600fe38 00000000 OCP_IRQSTATUS_2 0x5600fe3c 00000000 OCP_IRQENABLE_SET_0 0x5600fe40 00000000 OCP_IRQENABLE_SET_1 0x5600fe44 00000000 OCP_IRQENABLE_SET_2 0x5600fe48 00000000 OCP_IRQENABLE_CLR_0 0x5600fe4c 00000000 OCP_IRQENABLE_CLR_1 0x5600fe50 00000000 OCP_IRQENABLE_CLR_2 0x5600ff00 00000014 OCP_PAGE_CONFIG 0x5600ff04 00000000 OCP_INTERRUPT_EVENT 0x5600ff08 00000000 OCP_DEBUG_CONFIG 0x5600ff0c 023fe407 OCP_DEBUG_STATUS 0x56000010 01120000 SGX_CORE_VERSION 0x56000014 00010205 SGX_CORE_REVISION root@letux:~# root@letux:~# modprobe pvrsrvkm_omap_am335x_sgx530_125 [ 282.569941] pvrsrvkm_omap_am335x_sgx530_125: module is from the staging directory, the quality is unknown, you have been warned. [ 282.673908] [drm] Initialized pvr 1.14.3699939 20110701 for 56000000.sgx on minor 1 root@letux:~#
The 0112 of SGX_CORE_VERSION is sgx530 and 010205 is revision -125 as expected.
Starting pvr still reports that the ukernel can not be loaded, but that is somewhere in the pvrsrvkm code that my driver only likes the omap5+sgx544 at the moment.
Latest v5.4-rc2 code is here: [1]
Thanks and BR,
Nikolaus
[1]: https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/tree/letux-pvr
Hi,
Quoted 15 lines
Am 05.10.2019 um 18:58 schrieb H. Nikolaus Schaller <[email protected]>:
So I have several ideas what the reasons for the problems on the non-omap5 devices could be:
* initial code may have some omap5 specific hack inside
* or has omap5 specific magic constants
* uKernel may "know" on which platform it runs and
we would need differently patched user-space code
for each one
* omap5 has a dual core sgx544 while the other
have single core
* the register address translation is not yet correct and
this inhibits communicating of the user-space libs
with the uKernel
Quoted 3 lines
Maybe, if someone can point me to a complete and working BeagleBone source tree (any kernel release) which makes use of 1.14.3699939 SDK, I could compare code and address setup to find what makes the difference.
I have found the following description, followed all steps, and it works:
http://blog.0xpebbles.org/PowerVR-SGX-on-the-beaglebone-black-in-2019
So with this, I have got a working user-space setup for BeagleBone and some working pvrsrvkm.ko module (kernel 4.4.155-ti-r155) for evaluation.
Symbols of the kernel module are not stripped, so that I can indirectly compare some build/configure options.
root@arm:~# uname -a Linux arm 4.4.155-ti-r155 #1 SMP Thu May 23 06:00:18 UTC 2019 armv7l GNU/Linux root@arm:~# ls -l /lib/modules/4.4.155-ti-r155/extra/ti335x/pvrsrvkm.ko -rw-r--r-- 1 root root 408084 May 23 06:46 /lib/modules/4.4.155-ti-r155/extra/ti335x/pvrsrvkm.ko root@arm:~# dmesg|fgrep -i pvr [ 24.589384] pvrsrvkm: loading out-of-tree module taints kernel. [ 25.051602] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 root@arm:~# sudo /usr/bin/pvrsrvctl --start --no-module root@arm:~# cat /proc/pvr/version Version SGX_DDK sgxddk MAIN@3699939 (release) omap_linux System Version String: SGX revision = 125 root@arm:~#
For comparison, I have:
root@letux:~# uname -a Linux letux 5.4.0-rc2-letux+ #1161 SMP PREEMPT Wed Oct 9 19:05:21 CEST 2019 armv7l GNU/Linux root@letux:~# ls -l /lib/modules/5.4.0-rc2-letux+/kernel/drivers/staging/pvr/1.14.3699939/eurasia_km/pvrsrvkm_omap_am335x_sgx530_125.ko -rw-r--r-- 1 1002 root 4751504 Oct 9 17:09 /lib/modules/5.4.0-rc2-letux+/kernel/drivers/staging/pvr/1.14.3699939/eurasia_km/pvrsrvkm_omap_am335x_sgx530_125.ko root@letux:~# dmesg|fgrep -i pvr [ 119.376338] pvrsrvkm_omap_am335x_sgx530_125: module is from the staging directory, the quality is unknown, you have been warned. [ 119.478943] [drm] Initialized pvr 1.14.3699939 20110701 for 56000000.sgx on minor 1 root@letux:~# /usr/bin/pvrsrvctl --start --no-module [ 238.178801] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] PVR:(Error): LoaduKernelProgram : SGX ukernel program Device Addr: 0xe400000 invalid alignment PVR:(Error): SetupuKernel : Failed to load uKernel program PVR:(Error): SrvInit: Initialisation for device of class 0, type 7, index 0, failed (1) [0, ] [ 238.667915] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. PVR:(Error): PVRSRVBridgeCall: Failed to access device. Function ID:3223086862 (strerror returns no value.). [0, ] /usr/bin/pvrsrvctl: SrvInit failed (already initialized?) (err=PVRSRV_ERROR_OUT_OF_MEMORY - Unable to allocate required memory) root@letux:~#
First observations:
* pvrsrvkm.ko is a little smaller (may be a result of compiler and build options)
* both taint the kernel, as expected
* they are exactly the same DDK release 1.14.3699939
* my version is a little more verbose
* but fails loading the uKernel
What I don't have yet is the full source code or build recipe for the specific 4.4.155-ti-r155 pvrsrvkm.ko from TI.
But even without having this yet, I can start experiments by replacing kernel and pvrsrvkm.ko with mine. This should allow to gain new insights.
BR,
Nikolaus
Quoted 11 lines
Am 12.10.2019 um 15:09 schrieb H. Nikolaus Schaller <[email protected]>:
Hi,
Quoted 1 line
Am 05.10.2019 um 18:58 schrieb H. Nikolaus Schaller <[email protected]>:
I have found the following description, followed all steps, and it works:
http://blog.0xpebbles.org/PowerVR-SGX-on-the-beaglebone-black-in-2019
Quoted 8 lines
So with this, I have got a working user-space setup for BeagleBone and some working pvrsrvkm.ko module (kernel 4.4.155-ti-r155) for evaluation.
What I don't have yet is the full source code or build recipe for the specific 4.4.155-ti-r155 pvrsrvkm.ko from TI.
But even without having this yet, I can start experiments by replacing kernel and pvrsrvkm.ko with mine. This should allow to gain new insights.
Good news:
after making a Hybrid SD image of the setup described above and replacing the 4.4.155-ti-r155 kernel with its pvrsrvkm.ko by my own 5.4-rc2 kernel and pvrsrvkm, I was able to start the pvrsrv uKernel. And run the gles1test1 on beaglebone (without LCD but also without errors).
With this knowledge I could adapt my user-space. There are indeed different non-free binaries for sgx530, sgx540, sgx544. And SGX needs enough coherent memory. So I could make a completely self-built kernel and rootfs (using the git clone from ti for the firmware + make install) run on BeagleBone.
Here is a quickly taken video:
With the same setup, I can now also load the kernel driver and run pvrsrvctl on DM3730 without errors, but the gles1test1 reports some error and fails to run. Maybe something in the video subsystem or memory mapping is still wrong.
Unfortunately, the same setup does not run on omap5. It looks like there are different releases for the non-free binaries and I have to pick the right one.
On BBB the version I could make running is branch ti-img-sgx/1.14.3699939_k4.4 fromgit://git.ti.com/graphics/omap5-sgx-ddk-um-linux.git. Target ti335x works while target jacinto6evm fails for OMAP5. A diff on the binaries for e.g. pvrsrvctl shows that they are different.
If you want to repeat this setup and my instructions are too imprecise, please ask.
So in summary this means:
* the common foundation (clock, reset, power etc.) setup is working - thanks to Tero, Tony and others
* I have added device tree nodes for each SoC type to define sgx registers, interrupts, compatible etc.
* compiling SoC specific kernel module variants from single source tree works
* the work can already be demoed on BBB and OMAP5 Pyra (using different user-space binaries)
Basically I am now ready to post an RFC for the sgx child device nodes together with a bindings document [1]. But I am not sure if I should better wait until really all underlaying prm+rtsctl+syscon+idlest-polling patches by Tero and Tony [2] have matured in linux-next and have arrived in v5.5-rc1. Would be short before Xmas.
Independent of low level patches, we all have to discuss how we want to get the GPLed kernel driver [3] into mainline drivers/staging. This likely needs more cleanup before it can be proposed.
BR,
Nikolaus
[1]: https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/commits/letux/omap-pvr-soc-glue-v5
[2]: https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/commits/letux/omap-sysc-prm-gfx
[3]: https://github.com/openpvrsgx-devgroup/linux_openpvrsgx/commits/letux/latest-pvr
Quoted 27 lines · H. Nikolaus Schaller
Quoted 11 lines
Am 12.10.2019 um 15:09 schrieb H. Nikolaus Schaller <[email protected]>:
Hi,
Quoted 1 line
Am 05.10.2019 um 18:58 schrieb H. Nikolaus Schaller <[email protected]>:
I have found the following description, followed all steps, and it works:
http://blog.0xpebbles.org/PowerVR-SGX-on-the-beaglebone-black-in-2019
Quoted 8 lines
So with this, I have got a working user-space setup for BeagleBone and some working pvrsrvkm.ko module (kernel 4.4.155-ti-r155) for evaluation.
What I don't have yet is the full source code or build recipe for the specific 4.4.155-ti-r155 pvrsrvkm.ko from TI.
But even without having this yet, I can start experiments by replacing kernel and pvrsrvkm.ko with mine. This should allow to gain new insights.
Good news:
after making a Hybrid SD image of the setup described above and replacing the 4.4.155-ti-r155 kernel with its pvrsrvkm.ko by my own 5.4-rc2 kernel and pvrsrvkm, I was able to start the pvrsrv uKernel. And run the gles1test1 on beaglebone (without LCD but also without errors).
Quoted 8 lines
With this knowledge I could adapt my user-space. There are indeed different non-free binaries for sgx530, sgx540, sgx544. And SGX needs enough coherent memory. So I could make a completely self-built kernel and rootfs (using the git clone from ti for the firmware + make install) run on BeagleBone.
Here is a quickly taken video:
Nice :)
Quoted 21 lines
With the same setup, I can now also load the kernel driver and run pvrsrvctl on DM3730 without errors, but the gles1test1 reports some error and fails to run. Maybe something in the video subsystem or memory mapping is still wrong.
Unfortunately, the same setup does not run on omap5. It looks like there are different releases for the non-free binaries and I have to pick the right one.
On BBB the version I could make running is branch ti-img-sgx/1.14.3699939_k4.4 from
git://git.ti.com/graphics/omap5-sgx-ddk-um-linux.git. Target ti335x works while target jacinto6evm fails for OMAP5. A diff on the binaries for e.g. pvrsrvctl shows that they are different.If you want to repeat this setup and my instructions are too imprecise, please ask.
So in summary this means:
* the common foundation (clock, reset, power etc.) setup is working - thanks to Tero, Tony and others
* I have added device tree nodes for each SoC type to define sgx registers, interrupts, compatible etc.
* compiling SoC specific kernel module variants from single source tree works
* the work can already be demoed on BBB and OMAP5 Pyra (using different user-space binaries)
Quoted 4 lines
Basically I am now ready to post an RFC for the sgx child device nodes together with a bindings document [1]. But I am not sure if I should better wait until really all underlaying prm+rtsctl+syscon+idlest-polling patches by Tero and Tony [2] have matured in linux-next and have arrived in v5.5-rc1. Would be short before Xmas.
I think you've already proven that we can have a generic binding for the sgx using standard properties :) So AFAIK, there's nothing stopping you from posting the binding and dts changes for review for v5.5.
Quoted 3 lines
Independent of low level patches, we all have to discuss how we want to get the GPLed kernel driver [3] into mainline
drivers/staging. This likely needs more cleanup before it can be proposed.
You probably need a shell script using sed or something to get rid of the crazy directory path for the kernel driver :) Just make it something like:
drivers/staging/pvr
Then if you have a script doing the directory path conversion, you can still convert and diff against any other prv branches you may find.
And you can get rid of all the LINUX_VERSION_CODE stuff too for the mainline kernel.
Regards,
Tony