Rework of Makefiles
I have reworked the Makefiles a bit to make it more compatible with the standard semantics for DESTDIR and PREFIX.
What made me look at this was a package I was working on in Buildroot[1] that was using the pkg-config file generated from libselinux. The pkg-config file generated has bogus paths which results in that my package did not compile.
When looking further in our packages for libselinux/libsepol/libsemanage, we allready do "tricks" to make it compile.
For example, we set DESTDIR during compilation to compute library and header paths.
DESTDIR should be supported only in the install* and uninstall* targets, as those are the only targets where it is useful. [2]
PREFIX should be used to set a prefix for the installation. This could be provided both in compile and install stages.
For example, consider the following line:
#make DESTDIR=/tmp/selinux install
It will generate a libselinux.pc file that looks like this:
prefix=/tmp/selinux/usr
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
includedir=/tmp/selinux/usr/include
The DESTDIR should not be part of the prefix. The correct output should be:
prefix=/usr
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
includedir=/usr/include
The following example do not compile at all:
#make DESTDIR=/tmp/myroot PREFIX=/selinux install
In this case, everything should be installed under /tmp/myroot/selinux.
The prefix in all generated pkg-files should have the path /selinux/xxxxx ( not /tmp/myroot/selinux/xxxx).
This patchsets tries to solve the following issues:
- The pkg-config files generates odd paths when using DESTDIR without PREFIX
- DESTDIR is needed during compile time to compute library and header paths which it should not.
- Installing with both DESTDIR and PREFIX set gives us odd paths
- Make usage of DESTDIR and PREFIX more standard
However, DESTDIR is still needed in the "root" Makefile to make libsemanage to compile. But all components (libselinux, libsepol and libsemanage) can be compiled separatly with standard usage of DESTDIR and PREFIX.
Thanks,
Best regards
Marcus Folkesson
[1] https://buildroot.org/
[2] https://www.gnu.org/prep/standards/html_node/DESTDIR.html
PATCH 3/3 libsemanage: build: follow standard semantics for DESTDIR and PREFIX
This patch solves the following issues:
- DESTDIR is needed during compile time to compute library and header paths which it should not.
- Installing with both DESTDIR and PREFIX set gives us odd paths
- Make usage of DESTDIR and PREFIX more standard
--- libsemanage/include/Makefile | 4 ++-- libsemanage/man/Makefile | 5 +++-- libsemanage/src/Makefile | 22 ++++++++++------------ libsemanage/src/libsemanage.pc.in | 2 +- libsemanage/tests/Makefile | 3 --- 5 files changed, 16 insertions(+), 20 deletions(-)
libsemanage/include/Makefile +2 -2
@@ -1,6 +1,6 @@ # Installation directories. -PREFIX ?= $(DESTDIR)/usr -INCDIR ?= $(PREFIX)/include/semanage +PREFIX ?= /usr +INCDIR ?= $(DESTDIR)$(PREFIX)/include/semanage all:
libsemanage/man/Makefile +3 -2
@@ -1,6 +1,7 @@ # Installation directories. -MAN3DIR ?= $(DESTDIR)/usr/share/man/man3 -MAN5DIR ?= $(DESTDIR)/usr/share/man/man5 +PREFIX ?= /usr +MAN3DIR ?= $(DESTDIR)$(PREFIX)/share/man/man3 +MAN5DIR ?= $(DESTDIR)$(PREFIX)/share/man/man5 all:
libsemanage/src/Makefile +10 -12
@@ -8,10 +8,10 @@ RUBYPREFIX ?= $(notdir $(RUBY)) PKG_CONFIG ?= pkg-config # Installation directories. -PREFIX ?= $(DESTDIR)/usr +PREFIX ?= /usr LIBDIR ?= $(PREFIX)/lib -SHLIBDIR ?= $(DESTDIR)/lib INCLUDEDIR ?= $(PREFIX)/include +LIBINSTALL = $(DESTDIR)$(LIBDIR) PYINC ?= $(shell $(PKG_CONFIG) --cflags $(PYPREFIX)) PYLIBS ?= $(shell $(PKG_CONFIG) --libs $(PYPREFIX)) PYSITEDIR ?= $(DESTDIR)$(shell $(PYTHON) -c 'import site; print(site.getsitepackages()[0])')
@@ -20,8 +20,6 @@ RUBYINC ?= $(shell $(RUBY) -e 'puts "-I" + RbConfig::CONFIG["rubyarchhdrdir"] + RUBYLIBS ?= $(shell $(RUBY) -e 'puts "-L" + RbConfig::CONFIG["libdir"] + " -L" + RbConfig::CONFIG["archlibdir"] + " " + RbConfig::CONFIG["LIBRUBYARG_SHARED"]') RUBYINSTALL ?= $(DESTDIR)$(shell $(RUBY) -e 'puts RbConfig::CONFIG["vendorarchdir"]') -LIBBASE=$(shell basename $(LIBDIR)) - DEFAULT_SEMANAGE_CONF_LOCATION=$(DESTDIR)/etc/selinux/semanage.conf ifeq ($(DEBUG),1)
@@ -95,7 +93,7 @@ $(LIBSO): $(LOBJS) ln -sf $@ $(TARGET) $(LIBPC): $(LIBPC).in ../VERSION - sed -e 's/@VERSION@/$(VERSION)/; s:@prefix@:$(PREFIX):; s:@libdir@:$(LIBBASE):; s:@includedir@:$(INCLUDEDIR):' < $< > $@ + sed -e 's/@VERSION@/$(VERSION)/; s:@prefix@:$(PREFIX):; s:@libdir@:$(LIBDIR):; s:@includedir@:$(INCLUDEDIR):' < $< > $@ semanageswig_python_exception.i: ../include/semanage/semanage.h bash -e exception.sh > $@ || (rm -f $@ ; false)
@@ -136,13 +134,13 @@ swigify: $(SWIGIF) $(SWIG) $< install: all - test -d $(LIBDIR) || install -m 755 -d $(LIBDIR) - install -m 644 $(LIBA) $(LIBDIR) - install -m 755 $(LIBSO) $(LIBDIR) - test -d $(LIBDIR)/pkgconfig || install -m 755 -d $(LIBDIR)/pkgconfig - install -m 644 $(LIBPC) $(LIBDIR)/pkgconfig + test -d $(LIBINSTALL) || install -m 755 -d $(LIBINSTALL) + install -m 644 $(LIBA) $(LIBINSTALL) + install -m 755 $(LIBSO) $(LIBINSTALL) + test -d $(LIBINSTALL)/pkgconfig || install -m 755 -d $(LIBINSTALL)/pkgconfig + install -m 644 $(LIBPC) $(LIBINSTALL)/pkgconfig test -f $(DEFAULT_SEMANAGE_CONF_LOCATION) || install -m 644 -D semanage.conf $(DEFAULT_SEMANAGE_CONF_LOCATION) - cd $(LIBDIR) && ln -sf $(LIBSO) $(TARGET) + cd $(LIBINSTALL) && ln -sf $(LIBSO) $(TARGET) install-pywrap: pywrap test -d $(PYSITEDIR) || install -m 755 -d $(PYSITEDIR)
@@ -155,7 +153,7 @@ install-rubywrap: rubywrap install -m 755 $(SWIGRUBYSO) $(RUBYINSTALL)/semanage.so relabel: - /sbin/restorecon $(LIBDIR)/$(LIBSO) + /sbin/restorecon $(LIBINSTALL)/$(LIBSO) clean: -rm -f $(LIBPC) $(OBJS) $(LOBJS) $(LIBA) $(LIBSO) $(SWIGLOBJ) $(SWIGSO) $(SWIGRUBYSO) $(TARGET) conf-parse.c conf-parse.h conf-scan.c *.o *.lo *~
libsemanage/src/libsemanage.pc.in +1 -1
@@ -1,6 +1,6 @@ prefix=@prefix@ exec_prefix=${prefix} -libdir=${exec_prefix}/@libdir@ +libdir=@libdir@ includedir=@includedir@ Name: libsemanage
libsemanage/tests/Makefile +0 -3
@@ -1,6 +1,3 @@ -PREFIX ?= $(DESTDIR)/usr -LIBDIR ?= $(PREFIX)/lib - # Add your test source files here: SOURCES = $(sort $(wildcard *.c))
Signature · 1 line
2.15.1
PATCH 1/3 libsepol: build: follow standard semantics for DESTDIR and PREFIX
In reply to Marcus FolkessonThis patch solves the following issues:
- The pkg-config files generates odd paths when using DESTDIR without PREFIX
- DESTDIR is needed during compile time to compute library and header paths which it should not.
- Installing with both DESTDIR and PREFIX set gives us odd paths
- Make usage of DESTDIR and PREFIX more standard
--- README | 2 +- libsepol/include/Makefile | 4 ++-- libsepol/man/Makefile | 5 +++-- libsepol/src/Makefile | 23 +++++++++++------------ libsepol/src/libsepol.pc.in | 2 +- libsepol/utils/Makefile | 4 ++-- 6 files changed, 20 insertions(+), 20 deletions(-)
README +1 -1
@@ -19,6 +19,6 @@ lacks library functions or other dependencies relied upon by your distribution. If it breaks, you get to keep both pieces. To install libsepol on macOS (mainly for policy analysis): -cd libsepol; make DESTDIR=/usr/local PREFIX=/usr/local install +cd libsepol; make PREFIX=/usr/local install This requires GNU coreutils (brew install coreutils).
libsepol/include/Makefile +2 -2
@@ -1,6 +1,6 @@ # Installation directories. -PREFIX ?= $(DESTDIR)/usr -INCDIR ?= $(PREFIX)/include/sepol +PREFIX ?= /usr +INCDIR = $(DESTDIR)$(PREFIX)/include/sepol CILDIR ?= ../cil all:
libsepol/man/Makefile +3 -2
@@ -1,6 +1,7 @@ # Installation directories. -MAN8DIR ?= $(DESTDIR)/usr/share/man/man8 -MAN3DIR ?= $(DESTDIR)/usr/share/man/man3 +PREFIX ?= /usr +MAN8DIR ?= $(DESTDIR)$(PREFIX)/share/man/man8 +MAN3DIR ?= $(DESTDIR)$(PREFIX)/share/man/man3 all:
libsepol/src/Makefile +11 -12
@@ -1,11 +1,10 @@ # Installation directories. -PREFIX ?= $(DESTDIR)/usr +PREFIX ?= /usr INCLUDEDIR ?= $(PREFIX)/include LIBDIR ?= $(PREFIX)/lib -SHLIBDIR ?= $(DESTDIR)/lib RANLIB ?= ranlib -LIBBASE ?= $(shell basename $(LIBDIR)) CILDIR ?= ../cil +LIBINSTALL = $(DESTDIR)$(LIBDIR) VERSION = $(shell cat ../VERSION) LIBVERSION = 1
@@ -52,7 +51,7 @@ $(LIBSO): $(LOBJS) $(LIBMAP) ln -sf $@ $(TARGET) $(LIBPC): $(LIBPC).in ../VERSION - sed -e 's/@VERSION@/$(VERSION)/; s:@prefix@:$(PREFIX):; s:@libdir@:$(LIBBASE):; s:@includedir@:$(INCLUDEDIR):' < $< > $@ + sed -e 's/@VERSION@/$(VERSION)/; s:@prefix@:$(PREFIX):; s:@libdir@:$(LIBDIR):; s:@includedir@:$(INCLUDEDIR):' < $< > $@ $(LIBMAP): $(LIBMAP).in ifneq ($(DISABLE_CIL),y)
@@ -80,16 +79,16 @@ endif $(CC) $(CFLAGS) -fPIC -DSHARED -c -o $@ $< install: all - test -d $(LIBDIR) || install -m 755 -d $(LIBDIR) - install -m 644 $(LIBA) $(LIBDIR) - test -d $(SHLIBDIR) || install -m 755 -d $(SHLIBDIR) - install -m 755 $(LIBSO) $(SHLIBDIR) - test -d $(LIBDIR)/pkgconfig || install -m 755 -d $(LIBDIR)/pkgconfig - install -m 644 $(LIBPC) $(LIBDIR)/pkgconfig - $(LN) -sf --relative $(SHLIBDIR)/$(LIBSO) $(LIBDIR)/$(TARGET) + test -d $(LIBINSTALL) || install -m 755 -d $(LIBINSTALL) + install -m 644 $(LIBA) $(LIBINSTALL) + test -d $(LIBINSTALL) || install -m 755 -d $(LIBINSTALL) + install -m 755 $(LIBSO) $(LIBINSTALL) + test -d $(LIBINSTALL)/pkgconfig || install -m 755 -d $(LIBINSTALL)/pkgconfig + install -m 644 $(LIBPC) $(LIBINSTALL)/pkgconfig + $(LN) -sf --relative $(LIBINSTALL)/$(LIBSO) $(LIBINSTALL)/$(TARGET) relabel: - /sbin/restorecon $(SHLIBDIR)/$(LIBSO) + /sbin/restorecon $(LIBINSTALL)/$(LIBSO) clean: -rm -f $(LIBPC) $(LIBMAP) $(OBJS) $(LOBJS) $(LIBA) $(LIBSO) $(TARGET) $(CIL_GENERATED)
libsepol/src/libsepol.pc.in +1 -1
@@ -1,6 +1,6 @@ prefix=@prefix@ exec_prefix=${prefix} -libdir=${exec_prefix}/@libdir@ +libdir=@libdir@ includedir=@includedir@ Name: libsepol
libsepol/utils/Makefile +2 -2
@@ -1,6 +1,6 @@ # Installation directories. -PREFIX ?= $(DESTDIR)/usr -BINDIR ?= $(PREFIX)/bin +PREFIX ?= /usr +BINDIR ?= $(DESTDIR)$(PREFIX)/bin CFLAGS ?= -Wall -Werror override CFLAGS += -I../include
Signature · 1 line
2.15.1
PATCH 2/3 libselinux: build: follow standard semantics for DESTDIR and PREFIX
In reply to Marcus FolkessonThis patch solves the following issues:
- The pkg-config files generates odd paths when using DESTDIR without PREFIX
- DESTDIR is needed during compile time to compute library and header paths which it should not.
- Installing with both DESTDIR and PREFIX set gives us odd paths
- Make usage of DESTDIR and PREFIX more standard
--- libselinux/include/Makefile | 4 ++-- libselinux/man/Makefile | 7 ++++--- libselinux/src/Makefile | 28 +++++++++++++--------------- libselinux/src/libselinux.pc.in | 2 +- libselinux/utils/Makefile | 6 ++---- 5 files changed, 22 insertions(+), 25 deletions(-)
libselinux/include/Makefile +2 -2
@@ -1,6 +1,6 @@ # Installation directories. -PREFIX ?= $(DESTDIR)/usr -INCDIR ?= $(PREFIX)/include/selinux +PREFIX ?= /usr +INCDIR = $(DESTDIR)$(PREFIX)/include/selinux all:
libselinux/man/Makefile +4 -3
@@ -1,7 +1,8 @@ # Installation directories. -MAN8DIR ?= $(DESTDIR)/usr/share/man/man8 -MAN5DIR ?= $(DESTDIR)/usr/share/man/man5 -MAN3DIR ?= $(DESTDIR)/usr/share/man/man3 +PREFIX ?= /usr +MAN8DIR ?= $(DESTDIR)$(PREFIX)/share/man/man8 +MAN5DIR ?= $(DESTDIR)$(PREFIX)/share/man/man5 +MAN3DIR ?= $(DESTDIR)$(PREFIX)/share/man/man3 all:
libselinux/src/Makefile +13 -15
@@ -8,10 +8,10 @@ RUBYPREFIX ?= $(notdir $(RUBY)) PKG_CONFIG ?= pkg-config # Installation directories. -PREFIX ?= $(DESTDIR)/usr +PREFIX ?= /usr LIBDIR ?= $(PREFIX)/lib -SHLIBDIR ?= $(DESTDIR)/lib INCLUDEDIR ?= $(PREFIX)/include +LIBINSTALL = $(DESTDIR)$(LIBDIR) PYINC ?= $(shell $(PKG_CONFIG) --cflags $(PYPREFIX)) PYLIBS ?= $(shell $(PKG_CONFIG) --libs $(PYPREFIX)) PYSITEDIR ?= $(DESTDIR)$(shell $(PYTHON) -c 'import site; print(site.getsitepackages()[0])')
@@ -19,8 +19,6 @@ PYCEXT ?= $(shell $(PYTHON) -c 'import imp;print([s for s,m,t in imp.get_suffixe RUBYINC ?= $(shell $(RUBY) -e 'puts "-I" + RbConfig::CONFIG["rubyarchhdrdir"] + " -I" + RbConfig::CONFIG["rubyhdrdir"]') RUBYLIBS ?= $(shell $(RUBY) -e 'puts "-L" + RbConfig::CONFIG["libdir"] + " -L" + RbConfig::CONFIG["archlibdir"] + " " + RbConfig::CONFIG["LIBRUBYARG_SHARED"]') RUBYINSTALL ?= $(DESTDIR)$(shell $(RUBY) -e 'puts RbConfig::CONFIG["vendorarchdir"]') -LIBBASE ?= $(shell basename $(LIBDIR)) -LIBSEPOLA ?= $(LIBDIR)/libsepol.a VERSION = $(shell cat ../VERSION) LIBVERSION = 1
@@ -148,7 +146,7 @@ $(LIBSO): $(LOBJS) ln -sf $@ $(TARGET) $(LIBPC): $(LIBPC).in ../VERSION - sed -e 's/@VERSION@/$(VERSION)/; s:@prefix@:$(PREFIX):; s:@libdir@:$(LIBBASE):; s:@includedir@:$(INCLUDEDIR):; s:@PCRE_MODULE@:$(PCRE_MODULE):' < $< > $@ + sed -e 's/@VERSION@/$(VERSION)/; s:@prefix@:$(PREFIX):; s:@libdir@:$(LIBDIR):; s:@includedir@:$(INCLUDEDIR):; s:@PCRE_MODULE@:$(PCRE_MODULE):' < $< > $@ selinuxswig_python_exception.i: ../include/selinux/selinux.h bash -e exception.sh > $@ || (rm -f $@ ; false)
@@ -156,8 +154,8 @@ selinuxswig_python_exception.i: ../include/selinux/selinux.h $(AUDIT2WHYLOBJ): audit2why.c $(CC) $(filter-out -Werror, $(CFLAGS)) $(PYINC) -fPIC -DSHARED -c -o $@ $< -$(AUDIT2WHYSO): $(AUDIT2WHYLOBJ) $(LIBSEPOLA) - $(CC) $(CFLAGS) $(LDFLAGS) -L. -shared -o $@ $^ -lselinux $(PYLIBS) +$(AUDIT2WHYSO): $(AUDIT2WHYLOBJ) + $(CC) $(CFLAGS) $(LDFLAGS) -L. -shared -o $@ $^ -lselinux $(PYLIBS) -l:libsepol.a %.o: %.c policy.h $(CC) $(CFLAGS) $(TLSFLAGS) -c -o $@ $<
@@ -177,13 +175,13 @@ swigify: $(SWIGIF) $(SWIG) $< install: all - test -d $(LIBDIR) || install -m 755 -d $(LIBDIR) - install -m 644 $(LIBA) $(LIBDIR) - test -d $(SHLIBDIR) || install -m 755 -d $(SHLIBDIR) - install -m 755 $(LIBSO) $(SHLIBDIR) - test -d $(LIBDIR)/pkgconfig || install -m 755 -d $(LIBDIR)/pkgconfig - install -m 644 $(LIBPC) $(LIBDIR)/pkgconfig - ln -sf --relative $(SHLIBDIR)/$(LIBSO) $(LIBDIR)/$(TARGET) + test -d $(LIBINSTALL) || install -m 755 -d $(LIBINSTALL) + install -m 644 $(LIBA) $(LIBINSTALL) + test -d $(LIBINSTALL) || install -m 755 -d $(LIBINSTALL) + install -m 755 $(LIBSO) $(LIBINSTALL) + test -d $(LIBINSTALL)/pkgconfig || install -m 755 -d $(LIBINSTALL)/pkgconfig + install -m 644 $(LIBPC) $(LIBINSTALL)/pkgconfig + ln -sf --relative $(LIBINSTALL)/$(LIBSO) $(LIBINSTALL)/$(TARGET) install-pywrap: pywrap test -d $(PYSITEDIR)/selinux || install -m 755 -d $(PYSITEDIR)/selinux
@@ -196,7 +194,7 @@ install-rubywrap: rubywrap install -m 755 $(SWIGRUBYSO) $(RUBYINSTALL)/selinux.so relabel: - /sbin/restorecon $(SHLIBDIR)/$(LIBSO) + /sbin/restorecon $(LIBINSTALL)/$(LIBSO) clean-pywrap: -rm -f $(SWIGLOBJ) $(SWIGSO) $(AUDIT2WHYLOBJ) $(AUDIT2WHYSO)
libselinux/src/libselinux.pc.in +1 -1
@@ -1,6 +1,6 @@ prefix=@prefix@ exec_prefix=${prefix} -libdir=${exec_prefix}/@libdir@ +libdir=@libdir@ includedir=@includedir@ Name: libselinux
libselinux/utils/Makefile +2 -4
@@ -1,8 +1,6 @@ # Installation directories. -PREFIX ?= $(DESTDIR)/usr -LIBDIR ?= $(PREFIX)/lib -SBINDIR ?= $(PREFIX)/sbin -INCLUDEDIR ?= $(PREFIX)/include +PREFIX ?= /usr +SBINDIR ?= $(DESTDIR)$(PREFIX)/sbin OS ?= $(shell uname)
Signature · 1 line
2.15.1
Re: [PATCH 1/3] libsepol: build: follow standard semantics for DESTDIR and PREFIX
In reply to Marcus FolkessonQuoted 108 lines · Marcus Folkesson
This patch solves the following issues:
- The pkg-config files generates odd paths when using DESTDIR without PREFIX
- DESTDIR is needed during compile time to compute library and header paths which it should not.
- Installing with both DESTDIR and PREFIX set gives us odd paths
- Make usage of DESTDIR and PREFIX more standardSigned-off-by Marcus Folkesson <[email protected]>---
README | 2 +- libsepol/include/Makefile | 4 ++-- libsepol/man/Makefile | 5 +++-- libsepol/src/Makefile | 23 +++++++++++------------ libsepol/src/libsepol.pc.in | 2 +- libsepol/utils/Makefile | 4 ++--6 files changed, 20 insertions(+), 20 deletions(-)README +0
-0@@ -19,6 +19,6 @@ lacks library functions or other dependenciesrelied upon by your
distribution. If it breaks, you get to keep both pieces.
To install libsepol on macOS (mainly for policy analysis):README +1
-1-cd libsepol; make DESTDIR=/usr/local PREFIX=/usr/local install +cd libsepol; make PREFIX=/usr/local install
This requires GNU coreutils (brew install coreutils).libsepol/include/Makefile +2
-2@@ -1,6 +1,6 @@ # Installation directories. -PREFIX ?= $(DESTDIR)/usr -INCDIR ?= $(PREFIX)/include/sepol +PREFIX ?= /usr +INCDIR = $(DESTDIR)$(PREFIX)/include/sepolCILDIR ?= ../cil
all:libsepol/man/Makefile +3
-2@@ -1,6 +1,7 @@ # Installation directories. -MAN8DIR ?= $(DESTDIR)/usr/share/man/man8 -MAN3DIR ?= $(DESTDIR)/usr/share/man/man3 +PREFIX ?= /usr +MAN8DIR ?= $(DESTDIR)$(PREFIX)/share/man/man8 +MAN3DIR ?= $(DESTDIR)$(PREFIX)/share/man/man3
all:libsepol/src/Makefile +1
-1@@ -1,11 +1,10 @@ # Installation directories. -PREFIX ?= $(DESTDIR)/usr +PREFIX ?= /usrINCLUDEDIR ?= $(PREFIX)/include
LIBDIR ?= $(PREFIX)/lib
-SHLIBDIR ?= $(DESTDIR)/lib
RANLIB ?= ranlib
-LIBBASE ?= $(shell basename $(LIBDIR))
CILDIR ?= ../cil
+LIBINSTALL = $(DESTDIR)$(LIBDIR)
VERSION = $(shell cat ../VERSION)
LIBVERSION = 1libsepol/src/Makefile +0
-0@@ -52,7 +51,7 @@ $(LIBSO): $(LOBJS) $(LIBMAP) ln -sf $@ $(TARGET)
$(LIBPC): $(LIBPC).in ../VERSIONlibsepol/src/Makefile +0
-1- sed -e 's/@VERSION@/$(VERSION)/; s:@prefix@:$(PREFIX):;s:@libdir@:$(LIBBASE):; s:@includedir@:$(INCLUDEDIR):' < $< > $@
libsepol/src/Makefile +1
-0+ sed -e 's/@VERSION@/$(VERSION)/; s:@prefix@:$(PREFIX):;s:@libdir@:$(LIBDIR):; s:@includedir@:$(INCLUDEDIR):' < $< > $@
$(LIBMAP): $(LIBMAP).in
ifneq ($(DISABLE_CIL),y)libsepol/src/Makefile +0
-0@@ -80,16 +79,16 @@ endif$(CC) $(CFLAGS) -fPIC -DSHARED -c -o $@ $<
install: alllibsepol/src/Makefile +0
-5- test -d $(LIBDIR) || install -m 755 -d $(LIBDIR) - install -m 644 $(LIBA) $(LIBDIR) - test -d $(SHLIBDIR) || install -m 755 -d $(SHLIBDIR) - install -m 755 $(LIBSO) $(SHLIBDIR) - test -d $(LIBDIR)/pkgconfig || install -m 755 -d$(LIBDIR)/pkgconfig
libsepol/src/Makefile +0
-2- install -m 644 $(LIBPC) $(LIBDIR)/pkgconfig - $(LN) -sf --relative $(SHLIBDIR)/$(LIBSO)$(LIBDIR)/$(TARGET)
libsepol/src/Makefile +5
-0+ test -d $(LIBINSTALL) || install -m 755 -d $(LIBINSTALL) + install -m 644 $(LIBA) $(LIBINSTALL) + test -d $(LIBINSTALL) || install -m 755 -d $(LIBINSTALL) + install -m 755 $(LIBSO) $(LIBINSTALL) + test -d $(LIBINSTALL)/pkgconfig || install -m 755 -d$(LIBINSTALL)/pkgconfig
libsepol/src/Makefile +2
-0+ install -m 644 $(LIBPC) $(LIBINSTALL)/pkgconfig + $(LN) -sf --relative $(LIBINSTALL)/$(LIBSO)
Quoted 1 line
$(LIBINSTALL)/$(TARGET)
This changes where the shared objects are installed, from /lib or /lib64 to /usr/lib or /usr/lib64. On systems with usrmerge, this will not matter, but it will matter on systems without usrmerge.
Quoted 34 lines
relabel:libsepol/src/Makefile +1
-1- /sbin/restorecon $(SHLIBDIR)/$(LIBSO) + /sbin/restorecon $(LIBINSTALL)/$(LIBSO)
clean:
-rm -f $(LIBPC) $(LIBMAP) $(OBJS) $(LOBJS) $(LIBA) $(LIBSO) $(TARGET) $(CIL_GENERATED)libsepol/src/libsepol.pc.in +0
-0@@ -1,6 +1,6 @@prefix=@prefix@
exec_prefix=${prefix}libsepol/src/libsepol.pc.in +1
-1-libdir=${exec_prefix}/@libdir@ +libdir=@libdir@includedir=@includedir@
Name: libsepollibsepol/utils/Makefile +2
-2@@ -1,6 +1,6 @@ # Installation directories. -PREFIX ?= $(DESTDIR)/usr -BINDIR ?= $(PREFIX)/bin +PREFIX ?= /usr +BINDIR ?= $(DESTDIR)$(PREFIX)/bin
CFLAGS ?= -Wall -Werror
override CFLAGS += -I../include