Skip to contentSkip to conversation

i2c: mxs: use true and false for boolean values

PATCH Applied Gustavo A. R. Silva 2 participants 2 messages Jan 23, 2018 – Jan 26, 2018

Subsystems (2)
Arm i.MX and Layerscape I2C subsystem host drivers
lore
Share & tools
lore

Gustavo A. R. Silva

author
#0 lore raw

PATCH 1/1 i2c: mxs: use true and false for boolean values

Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.

Signed-off-by Gustavo A. R. Silva <[email protected]>
---
 drivers/i2c/busses/i2c-mxs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/i2c/busses/i2c-mxs.c +2 -2
index d4e8f19..e617bd6 100644
@@ -181,7 +181,7 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 	struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
 
 	if (msg->flags & I2C_M_RD) {
-		i2c->dma_read = 1;
+		i2c->dma_read = true;
 		i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_READ;
 
 		/*

@@ -239,7 +239,7 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 			goto read_init_dma_fail;
 		}
 	} else {
-		i2c->dma_read = 0;
+		i2c->dma_read = false;
 		i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_WRITE;
 
 		/*
Signature · 1 line
2.7.4