treewide: Fix typos in Kconfig
Subsystems (13)
PATCH 1/1 treewide: Fix typos in Kconfig
This patch fixes spelling typos found in Kconfig.
Signed-off-by Masanari Iida <[email protected]>
--- arch/arc/Kconfig | 4 ++-- arch/arm/mach-s3c24xx/Kconfig | 2 +- arch/arm/mach-s3c64xx/Kconfig | 2 +- arch/arm/plat-samsung/Kconfig | 4 ++-- arch/arm64/Kconfig | 2 +- arch/arm64/Kconfig.platforms | 2 +- arch/powerpc/Kconfig | 2 +- drivers/clk/mediatek/Kconfig | 2 +- drivers/input/touchscreen/Kconfig | 2 +- drivers/iommu/Kconfig | 2 +- drivers/mailbox/Kconfig | 2 +- drivers/platform/x86/Kconfig | 2 +- fs/nfsd/Kconfig | 4 ++-- lib/Kconfig | 4 ++-- 14 files changed, 18 insertions(+), 18 deletions(-)
arch/arc/Kconfig +2 -2
@@ -144,7 +144,7 @@ config ARC_CPU_770 Support for ARC770 core introduced with Rel 4.10 (Summer 2011) This core has a bunch of cool new features: -MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4) - Shared Address Spaces (for sharing TLB entires in MMU) + Shared Address Spaces (for sharing TLB entries in MMU) -Caches: New Prog Model, Region Flush -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
@@ -375,7 +375,7 @@ config ARC_FPU_SAVE_RESTORE need to be saved/restored across context-switch. Note that ARC FPU is overly simplistic, unlike say x86, which has hardware pieces to allow software to conditionally save/restore, - based on actual usage of FPU by a task. Thus our implemn does + based on actual usage of FPU by a task. Thus our implement does this for all tasks in system. endif #ISA_ARCOMPACT
arch/arm/mach-s3c24xx/Kconfig +1 -1
@@ -239,7 +239,7 @@ config MACH_N30 select S3C_DEV_NAND select S3C_DEV_USB_HOST help - Say Y here if you want suppt for the Acer N30, Acer N35, + Say Y here if you want support for the Acer N30, Acer N35, Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. config MACH_OTOM
arch/arm/mach-s3c64xx/Kconfig +1 -1
@@ -106,7 +106,7 @@ config S3C64XX_SETUP_USB_PHY help Common setup code for USB PHY controller -# S36400 Macchine support +# S36400 Machine support config MACH_SMDK6400 bool "SMDK6400"
arch/arm/plat-samsung/Kconfig +2 -2
@@ -156,7 +156,7 @@ config S3C_DEV_WDT bool default y if ARCH_S3C24XX help - Complie in platform device definition for Watchdog Timer + Compile in platform device definition for Watchdog Timer config S3C_DEV_NAND bool
@@ -171,7 +171,7 @@ config S3C_DEV_ONENAND config S3C_DEV_RTC bool help - Complie in platform device definition for RTC + Compile in platform device definition for RTC config SAMSUNG_DEV_ADC bool
arch/arm64/Kconfig +1 -1
@@ -570,7 +570,7 @@ config HISILICON_ERRATUM_161600802 bool "Hip07 161600802: Erroneous redistributor VLPI base" default y help - The HiSilicon Hip07 SoC usees the wrong redistributor base + The HiSilicon Hip07 SoC uses the wrong redistributor base when issued ITS commands such as VMOVP and VMAPP, and requires a 128kB offset to be applied to the target address in this commands.
arch/arm64/Kconfig.platforms +1 -1
@@ -126,7 +126,7 @@ config ARCH_MVEBU select PINCTRL_ARMADA_AP806 select PINCTRL_ARMADA_CP110 help - This enables support for Marvell EBU familly, including: + This enables support for Marvell EBU family, including: - Armada 3700 SoC Family - Armada 7K SoC Family - Armada 8K SoC Family
arch/powerpc/Kconfig +1 -1
@@ -94,7 +94,7 @@ config PPC_WATCHDOG help This is a placeholder when the powerpc hardlockup detector watchdog is selected (arch/powerpc/kernel/watchdog.c). It is - seleted via the generic lockup detector menu which is why we + selected via the generic lockup detector menu which is why we have no standalone config option for it here. config STACKTRACE_SUPPORT
drivers/clk/mediatek/Kconfig +1 -1
@@ -139,7 +139,7 @@ config COMMON_CLK_MT7622 default ARCH_MEDIATEK ---help--- This driver supports MediaTek MT7622 basic clocks and clocks - required for various periperals found on MediaTek. + required for various peripherals found on MediaTek. config COMMON_CLK_MT7622_ETHSYS bool "Clock driver for MediaTek MT7622 ETHSYS"
drivers/input/touchscreen/Kconfig +1 -1
@@ -362,7 +362,7 @@ config TOUCHSCREEN_HIDEEP If unsure, say N. - To compile this driver as a moudle, choose M here : the + To compile this driver as a module, choose M here : the module will be called hideep_ts. config TOUCHSCREEN_ILI210X
drivers/iommu/Kconfig +1 -1
@@ -365,7 +365,7 @@ config MTK_IOMMU_V1 select MTK_SMI help Support for the M4U on certain Mediatek SoCs. M4U generation 1 HW is - Multimedia Memory Managememt Unit. This option enables remapping of + Multimedia Memory Management Unit. This option enables remapping of DMA memory accesses for the multimedia subsystem. if unsure, say N here.
drivers/mailbox/Kconfig +1 -1
@@ -54,7 +54,7 @@ config OMAP_MBOX_KFIFO_SIZE module parameter). config ROCKCHIP_MBOX - bool "Rockchip Soc Intergrated Mailbox Support" + bool "Rockchip Soc Integrated Mailbox Support" depends on ARCH_ROCKCHIP || COMPILE_TEST help This driver provides support for inter-processor communication
drivers/platform/x86/Kconfig +1 -1
@@ -1054,7 +1054,7 @@ config INTEL_RST tristate "Intel Rapid Start Technology Driver" depends on ACPI ---help--- - This driver provides support for modifying paramaters on systems + This driver provides support for modifying parameters on systems equipped with Intel's Rapid Start Technology. When put in an ACPI sleep state, these devices will wake after either a configured timeout or when the system battery reaches a critical state,
fs/nfsd/Kconfig +2 -2
@@ -94,7 +94,7 @@ config NFSD_BLOCKLAYOUT help This option enables support for the exporting pNFS block layouts in the kernel's NFS server. The pNFS block layout enables NFS - clients to directly perform I/O to block devices accesible to both + clients to directly perform I/O to block devices accessible to both the server and the clients. See RFC 5663 for more details. If unsure, say N.
@@ -108,7 +108,7 @@ config NFSD_SCSILAYOUT help This option enables support for the exporting pNFS SCSI layouts in the kernel's NFS server. The pNFS SCSI layout enables NFS - clients to directly perform I/O to SCSI devices accesible to both + clients to directly perform I/O to SCSI devices accessible to both the server and the clients. See draft-ietf-nfsv4-scsi-layout for more details.
lib/Kconfig +2 -2
@@ -544,13 +544,13 @@ config SG_SPLIT help Provides a helper to split scatterlists into chunks, each chunk being a scatterlist. This should be selected by a driver or an API which - whishes to split a scatterlist amongst multiple DMA channels. + wishes to split a scatterlist amongst multiple DMA channels. config SG_POOL def_bool n help Provides a helper to allocate chained scatterlists. This should be - selected by a driver or an API which whishes to allocate chained + selected by a driver or an API which wishes to allocate chained scatterlist. #
Signature · 1 line
2.16.0
Quoted 3 lines · Masanari Iida
This patch fixes spelling typos found in
Kconfig.Signed-off-by Masanari Iida <[email protected]>
Acked-by Randy Dunlap <[email protected]>
One comment below.
Quoted 22 lines
--- arch/arc/Kconfig | 4 ++-- arch/arm/mach-s3c24xx/Kconfig | 2 +- arch/arm/mach-s3c64xx/Kconfig | 2 +- arch/arm/plat-samsung/Kconfig | 4 ++-- arch/arm64/Kconfig | 2 +- arch/arm64/Kconfig.platforms | 2 +- arch/powerpc/Kconfig | 2 +- drivers/clk/mediatek/Kconfig | 2 +- drivers/input/touchscreen/Kconfig | 2 +- drivers/iommu/Kconfig | 2 +- drivers/mailbox/Kconfig | 2 +- drivers/platform/x86/Kconfig | 2 +- fs/nfsd/Kconfig | 4 ++-- lib/Kconfig | 4 ++-- 14 files changed, 18 insertions(+), 18 deletions(-)arch/arc/Kconfig +0
-0
arch/arc/Kconfig config ARC_FPU_SAVE_RESTORE · line 378
Quoted 5 lines
arch/arc/Kconfig +1
-1@@ -375,7 +375,7 @@ config ARC_FPU_SAVE_RESTORE need to be saved/restored across context-switch. Note that ARC FPU is overly simplistic, unlike say x86, which has hardware pieces to allow software to conditionally save/restore, - based on actual usage of FPU by a task. Thus our implemn does + based on actual usage of FPU by a task. Thus our implement does
That might be "implementation" instead, but this is still better than it was.
arch/arc/Kconfig config ARC_FPU_SAVE_RESTORE · line 381
Quoted 3 lines
arch/arc/Kconfig +0
-0this for all tasks in system. endif #ISA_ARCOMPACT
thanks,
Signature · 1 line
~Randy