watchdog - v4.16 merge window
Hi Linus,
The following changes since commit f3b5ad89de16f5d42e8ad36fbdf85f705c1ae051:
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma (2017-12-16 13:43:08 -0800)
are available in the git repository at:
git://www.linux-watchdog.org/linux-watchdog.git
for you to fetch changes up to 592a547adf686dbec7687e816ecdf9101fe227f5:
documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt (2018-02-03 11:09:54 +0100)
----------------------------------------------------------------
Andreas Färber (2):
dt-bindings: watchdog: Add Realtek RTD1295
watchdog: Add Realtek RTD1295
Andrew Jeffery (4):
watchdog: aspeed: Retain watchdog enabled state
watchdog: aspeed: Fix 'Apseed' typo in Kconfig
watchdog: aspeed: Remove specific reference to AST2400 in Kconfig
watchdog: aspeed: Move init to arch_initcall
André Draszik (2):
watchdog: mt7621: set WDOG_HW_RUNNING bit when appropriate
watchdog: mt7621: switch to using managed devm_watchdog_register_device()
Arnd Bergmann (2):
watchdog: xen: use time64_t for timeouts
watchdog: hpwdt: fix unused variable warning
Benjamin Gaignard (1):
watchdog: stm32: Fix copyright
Chris Packham (1):
watchdog: orion: fix typo
Christophe Leroy (3):
watchdog: mpc8xxx: use the core worker function
watchdog: core: make sure the watchdog worker always works
watchdog: core: make sure the watchdog_worker is not deferred
Corentin Labbe (6):
watchdog: sunxi_wdt: use of_device_get_match_data
watchdog: document watchdog_init_timeout() wdd parameter
watchdog: remove at32ap700x_wdt
documentation: watchdog: remove documentation of at32ap700x_wdt
documentation: watchdog: remove documentation for ixp2000
documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt
David Lechner (1):
watchdog: davinci_wdt: add restart function
Eric Long (2):
dt-bindings: watchdog: Add Spreadtrum watchdog documentation
watchdog: Add Spreadtrum watchdog driver
Geert Uytterhoeven (1):
dt-bindings: watchdog: renesas-wdt: Add support for the r8a77970 wdt
Greg Kroah-Hartman (1):
watchdog: pcwd_usb: remove unneeded DRIVER_LICENSE #define
Guenter Roeck (15):
watchdog: Fix potential kref imbalance when opening watchdog
watchdog: Fix kref imbalance seen if handle_boot_enabled=0
MAINTAINERS: Add Guenter Roeck as co-maintainer of watchdog subsystem
watchdog: sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG}
watchdog: sp5100_tco: Fix watchdog disable bit
watchdog: sp5100_tco: Use request_muxed_region where possible
watchdog: sp5100_tco: Use standard error codes
watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice
watchdog: sp5100_tco: Match PCI device early
watchdog: sp5100_tco: Use dev_ print functions where possible
watchdog: sp5100_tco: Clean up function and variable names
watchdog: sp5100_tco: Convert to use watchdog subsystem
watchdog: sp5100_tco: Use bit operations
watchdog: sp5100-tco: Abort if watchdog is disabled by hardware
watchdog: sp5100_tco: Add support for recent FCH versions
Gustavo A. R. Silva (9):
watchdog: advantechwdt: mark expected switch fall-through
watchdog: alim1535_wdt: mark expected switch fall-through
watchdog: f71808e_wdt: mark expected switch fall-throughs
watchdog: pcwd_usb: mark expected switch fall-through
watchdog: pcwd_pci: mark expected switch fall-through
watchdog: watchdog_dev: mark expected switch fall-through
watchdog: wdt_pci: mark expected switch fall-through
watchdog: eurotechwdt: mark expected switch fall-through
watchdog: ib700wdt: mark expected switch fall-through
Jerry Hoemann (2):
watchdog: hpwdt: SMBIOS check
watchdog: hpwdt: Check source of NMI
Linus Walleij (5):
watchdog: gpio: Add some local helper variables
watchdog: gpio: Convert to use GPIO descriptors
watchdog: gemini/ftwdt010: rename DT bindings
watchdog: gemini/ftwdt010: rename driver and symbols
watchdog: ftwdt010: Make interrupt optional
Martin Kaiser (1):
watchdog: imx2_wdt: restore previous timeout after suspend+resume
Mathieu Malaterre (2):
watchdog: jz4740: Add support for the watchdog in jz4780 SoC
dt: watchdog: Document compatibility with JZ4780
Matt Redfearn (1):
watchdog: indydog: Add dependency on SGI_HAS_INDYDOG
Michael Grzeschik (3):
watchdog: da9062: Add restart handler support
watchdog: da9062: Disable and wait before changing timeout
watchdog: da9062: use protection delay mechanism from core
Oleksij Rempel (1):
watchdog: dw_wdt: add stop watchdog operation
Radu Rendec (6):
watchdog: i6300esb: use the watchdog subsystem
watchdog: i6300esb: support multiple devices
watchdog: i6300esb: do not hardcode heartbeat limits
watchdog: i6300esb: remove info message and version number
watchdog: xen_wdt: use the watchdog subsystem
watchdog: xen_wdt: remove info message and version number
Rasmus Villemoes (1):
watchdog: gpio_wdt: set WDOG_HW_RUNNING in gpio_wdt_stop
Tomas Winkler (1):
watchdog: mei_wdt: don't use of variable length array
Wim Van Sebroeck (1):
Change my E-mail address.
.../bindings/watchdog/cortina,gemini-watchdog.txt | 17 -
...ina,gemin-watchdog.txt => faraday,ftwdt010.txt} | 11 +-
.../bindings/watchdog/ingenic,jz4740-wdt.txt | 4 +-
.../bindings/watchdog/realtek,rtd119x.txt | 17 +
.../devicetree/bindings/watchdog/renesas-wdt.txt | 3 +-
.../devicetree/bindings/watchdog/sprd-wdt.txt | 19 +
Documentation/watchdog/watchdog-parameters.txt | 23 -
MAINTAINERS | 4 +-
drivers/watchdog/Kconfig | 41 +-
drivers/watchdog/Makefile | 7 +-
drivers/watchdog/advantechwdt.c | 2 +-
drivers/watchdog/alim1535_wdt.c | 2 +-
drivers/watchdog/aspeed_wdt.c | 21 +-
drivers/watchdog/at32ap700x_wdt.c | 433 -------------
drivers/watchdog/da9062_wdt.c | 48 +-
drivers/watchdog/davinci_wdt.c | 38 ++
drivers/watchdog/dw_wdt.c | 18 +-
drivers/watchdog/eurotechwdt.c | 2 +-
drivers/watchdog/f71808e_wdt.c | 4 +-
drivers/watchdog/ftwdt010_wdt.c | 236 +++++++
drivers/watchdog/gemini_wdt.c | 229 -------
drivers/watchdog/gpio_wdt.c | 58 +-
drivers/watchdog/hpwdt.c | 12 +-
drivers/watchdog/i6300esb.c | 377 ++++-------
drivers/watchdog/ib700wdt.c | 2 +-
drivers/watchdog/imx2_wdt.c | 20 +-
drivers/watchdog/jz4740_wdt.c | 1 +
drivers/watchdog/mei_wdt.c | 7 +-
drivers/watchdog/mpc8xxx_wdt.c | 83 ++-
drivers/watchdog/mt7621_wdt.c | 34 +-
drivers/watchdog/orion_wdt.c | 2 +-
drivers/watchdog/pcwd_pci.c | 2 +-
drivers/watchdog/pcwd_usb.c | 5 +-
drivers/watchdog/rtd119x_wdt.c | 168 +++++
drivers/watchdog/sp5100_tco.c | 710 +++++++++------------
drivers/watchdog/sp5100_tco.h | 57 +-
drivers/watchdog/sprd_wdt.c | 399 ++++++++++++
drivers/watchdog/stm32_iwdg.c | 6 +-
drivers/watchdog/sunxi_wdt.c | 7 +-
drivers/watchdog/watchdog_core.c | 1 +
drivers/watchdog/watchdog_dev.c | 125 ++--
drivers/watchdog/wdt_pci.c | 2 +-
drivers/watchdog/xen_wdt.c | 255 ++------
43 files changed, 1711 insertions(+), 1801 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
rename Documentation/devicetree/bindings/watchdog/{cortina,gemin-watchdog.txt => faraday,ftwdt010.txt} (55%)
create mode 100644 Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt
create mode 100644 Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
delete mode 100644 drivers/watchdog/at32ap700x_wdt.c
create mode 100644 drivers/watchdog/ftwdt010_wdt.c
delete mode 100644 drivers/watchdog/gemini_wdt.c
create mode 100644 drivers/watchdog/rtd119x_wdt.c
create mode 100644 drivers/watchdog/sprd_wdt.cQuoted 2 lines · Wim Van Sebroeck
git://www.linux-watchdog.org/linux-watchdog.git
Hmm. I really want to know why I should pull this. You have the shortlog and the diffstat, but you don't actually have a descriptive blurb about _what_ I'm pulling.
Please give me a summary of what this contains so that I can have a good merge message.
Linus
Guenter Roeck
maintainerQuoted 10 lines · Linus Torvalds
Quoted 2 lines · Wim Van Sebroeck
git://www.linux-watchdog.org/linux-watchdog.gitHmm. I really want to know why I should pull this. You have the shortlog and the diffstat, but you don't actually have a descriptive blurb about _what_ I'm pulling.
Please give me a summary of what this contains so that I can have a good merge message.
How about the following ? It matches Wim's tree, which I pulled and compared against my own copy. Only difference is the signed tag with a brief summary on top.
Thanks,
Guenter
---
Subject: [GIT PULL] watchdog updates for v4.16
Hi Linus,
Please pull watchdog updates for Linux v4.16 from signed tag:
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git watchdog-for-linus-v4.16
Thanks,
Guenter
------
The following changes since commit f3b5ad89de16f5d42e8ad36fbdf85f705c1ae051:
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma (2017-12-16 13:43:08 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git tags/watchdog-for-linus-v4.16
for you to fetch changes up to 592a547adf686dbec7687e816ecdf9101fe227f5:
documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt (2018-02-03 11:09:54 +0100)
----------------------------------------------------------------
watchdog updates for v4.16 commit window
- Converted to use watchdog subsystem: sp5100_tco, i6300esb, xen_wdt
- New drivers: Spreadtrum, Realtek RTD1295
- Added r8a77970 support to renesas-wdt
- Added jz4780 support to jz4740
- Removed at32ap700x_wdt driver
- Removed obsolete documentation
- Various bug fixes in watchdog core
- Cleanup and bug fixes in several drivers
- Added Guenter Roeck as co-maintainer
----------------------------------------------------------------
Andreas Färber (2):
dt-bindings: watchdog: Add Realtek RTD1295
watchdog: Add Realtek RTD1295
Andrew Jeffery (4):
watchdog: aspeed: Retain watchdog enabled state
watchdog: aspeed: Fix 'Apseed' typo in Kconfig
watchdog: aspeed: Remove specific reference to AST2400 in Kconfig
watchdog: aspeed: Move init to arch_initcall
André Draszik (2):
watchdog: mt7621: set WDOG_HW_RUNNING bit when appropriate
watchdog: mt7621: switch to using managed devm_watchdog_register_device()
Arnd Bergmann (2):
watchdog: xen: use time64_t for timeouts
watchdog: hpwdt: fix unused variable warning
Benjamin Gaignard (1):
watchdog: stm32: Fix copyright
Chris Packham (1):
watchdog: orion: fix typo
Christophe Leroy (3):
watchdog: mpc8xxx: use the core worker function
watchdog: core: make sure the watchdog worker always works
watchdog: core: make sure the watchdog_worker is not deferred
Corentin Labbe (6):
watchdog: sunxi_wdt: use of_device_get_match_data
watchdog: document watchdog_init_timeout() wdd parameter
watchdog: remove at32ap700x_wdt
documentation: watchdog: remove documentation of at32ap700x_wdt
documentation: watchdog: remove documentation for ixp2000
documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt
David Lechner (1):
watchdog: davinci_wdt: add restart function
Eric Long (2):
dt-bindings: watchdog: Add Spreadtrum watchdog documentation
watchdog: Add Spreadtrum watchdog driver
Geert Uytterhoeven (1):
dt-bindings: watchdog: renesas-wdt: Add support for the r8a77970 wdt
Greg Kroah-Hartman (1):
watchdog: pcwd_usb: remove unneeded DRIVER_LICENSE #define
Guenter Roeck (15):
watchdog: Fix potential kref imbalance when opening watchdog
watchdog: Fix kref imbalance seen if handle_boot_enabled=0
MAINTAINERS: Add Guenter Roeck as co-maintainer of watchdog subsystem
watchdog: sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG}
watchdog: sp5100_tco: Fix watchdog disable bit
watchdog: sp5100_tco: Use request_muxed_region where possible
watchdog: sp5100_tco: Use standard error codes
watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice
watchdog: sp5100_tco: Match PCI device early
watchdog: sp5100_tco: Use dev_ print functions where possible
watchdog: sp5100_tco: Clean up function and variable names
watchdog: sp5100_tco: Convert to use watchdog subsystem
watchdog: sp5100_tco: Use bit operations
watchdog: sp5100-tco: Abort if watchdog is disabled by hardware
watchdog: sp5100_tco: Add support for recent FCH versions
Gustavo A. R. Silva (9):
watchdog: advantechwdt: mark expected switch fall-through
watchdog: alim1535_wdt: mark expected switch fall-through
watchdog: f71808e_wdt: mark expected switch fall-throughs
watchdog: pcwd_usb: mark expected switch fall-through
watchdog: pcwd_pci: mark expected switch fall-through
watchdog: watchdog_dev: mark expected switch fall-through
watchdog: wdt_pci: mark expected switch fall-through
watchdog: eurotechwdt: mark expected switch fall-through
watchdog: ib700wdt: mark expected switch fall-through
Jerry Hoemann (2):
watchdog: hpwdt: SMBIOS check
watchdog: hpwdt: Check source of NMI
Linus Walleij (5):
watchdog: gpio: Add some local helper variables
watchdog: gpio: Convert to use GPIO descriptors
watchdog: gemini/ftwdt010: rename DT bindings
watchdog: gemini/ftwdt010: rename driver and symbols
watchdog: ftwdt010: Make interrupt optional
Martin Kaiser (1):
watchdog: imx2_wdt: restore previous timeout after suspend+resume
Mathieu Malaterre (2):
watchdog: jz4740: Add support for the watchdog in jz4780 SoC
dt: watchdog: Document compatibility with JZ4780
Matt Redfearn (1):
watchdog: indydog: Add dependency on SGI_HAS_INDYDOG
Michael Grzeschik (3):
watchdog: da9062: Add restart handler support
watchdog: da9062: Disable and wait before changing timeout
watchdog: da9062: use protection delay mechanism from core
Oleksij Rempel (1):
watchdog: dw_wdt: add stop watchdog operation
Radu Rendec (6):
watchdog: i6300esb: use the watchdog subsystem
watchdog: i6300esb: support multiple devices
watchdog: i6300esb: do not hardcode heartbeat limits
watchdog: i6300esb: remove info message and version number
watchdog: xen_wdt: use the watchdog subsystem
watchdog: xen_wdt: remove info message and version number
Rasmus Villemoes (1):
watchdog: gpio_wdt: set WDOG_HW_RUNNING in gpio_wdt_stop
Tomas Winkler (1):
watchdog: mei_wdt: don't use of variable length array
Wim Van Sebroeck (1):
Change my E-mail address.
.../bindings/watchdog/cortina,gemini-watchdog.txt | 17 -
...ina,gemin-watchdog.txt => faraday,ftwdt010.txt} | 11 +-
.../bindings/watchdog/ingenic,jz4740-wdt.txt | 4 +-
.../bindings/watchdog/realtek,rtd119x.txt | 17 +
.../devicetree/bindings/watchdog/renesas-wdt.txt | 3 +-
.../devicetree/bindings/watchdog/sprd-wdt.txt | 19 +
Documentation/watchdog/watchdog-parameters.txt | 23 -
MAINTAINERS | 4 +-
drivers/watchdog/Kconfig | 41 +-
drivers/watchdog/Makefile | 7 +-
drivers/watchdog/advantechwdt.c | 2 +-
drivers/watchdog/alim1535_wdt.c | 2 +-
drivers/watchdog/aspeed_wdt.c | 21 +-
drivers/watchdog/at32ap700x_wdt.c | 433 -------------
drivers/watchdog/da9062_wdt.c | 48 +-
drivers/watchdog/davinci_wdt.c | 38 ++
drivers/watchdog/dw_wdt.c | 18 +-
drivers/watchdog/eurotechwdt.c | 2 +-
drivers/watchdog/f71808e_wdt.c | 4 +-
drivers/watchdog/ftwdt010_wdt.c | 236 +++++++
drivers/watchdog/gemini_wdt.c | 229 -------
drivers/watchdog/gpio_wdt.c | 58 +-
drivers/watchdog/hpwdt.c | 12 +-
drivers/watchdog/i6300esb.c | 377 ++++-------
drivers/watchdog/ib700wdt.c | 2 +-
drivers/watchdog/imx2_wdt.c | 20 +-
drivers/watchdog/jz4740_wdt.c | 1 +
drivers/watchdog/mei_wdt.c | 7 +-
drivers/watchdog/mpc8xxx_wdt.c | 83 ++-
drivers/watchdog/mt7621_wdt.c | 34 +-
drivers/watchdog/orion_wdt.c | 2 +-
drivers/watchdog/pcwd_pci.c | 2 +-
drivers/watchdog/pcwd_usb.c | 5 +-
drivers/watchdog/rtd119x_wdt.c | 168 +++++
drivers/watchdog/sp5100_tco.c | 710 +++++++++------------
drivers/watchdog/sp5100_tco.h | 57 +-
drivers/watchdog/sprd_wdt.c | 399 ++++++++++++
drivers/watchdog/stm32_iwdg.c | 6 +-
drivers/watchdog/sunxi_wdt.c | 7 +-
drivers/watchdog/watchdog_core.c | 1 +
drivers/watchdog/watchdog_dev.c | 125 ++--
drivers/watchdog/wdt_pci.c | 2 +-
drivers/watchdog/xen_wdt.c | 255 ++------
43 files changed, 1711 insertions(+), 1801 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
rename Documentation/devicetree/bindings/watchdog/{cortina,gemin-watchdog.txt => faraday,ftwdt010.txt} (55%)
create mode 100644 Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt
create mode 100644 Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
delete mode 100644 drivers/watchdog/at32ap700x_wdt.c
create mode 100644 drivers/watchdog/ftwdt010_wdt.c
delete mode 100644 drivers/watchdog/gemini_wdt.c
create mode 100644 drivers/watchdog/rtd119x_wdt.c
create mode 100644 drivers/watchdog/sprd_wdt.cGuenter Roeck
maintainerQuoted 9 lines · Guenter Roeck
Quoted 8 lines · Linus Torvalds
Quoted 2 lines · Wim Van Sebroeck
git://www.linux-watchdog.org/linux-watchdog.gitHmm. I really want to know why I should pull this. You have the shortlog and the diffstat, but you don't actually have a descriptive blurb about _what_ I'm pulling.
Quoted 7 lines
Quoted 2 lines
Please give me a summary of what this contains so that I can have a good merge message.
How about the following ? It matches Wim's tree, which I pulled and compared against my own copy. Only difference is the signed tag with a brief summary on top.
Ok, for my part I am out of ideas. Any suggestion how to proceed, anyone, let me know.
Guenter
Quoted 225 lines
Thanks,
Guenter---
Subject: [GIT PULL] watchdog updates for v4.16Hi Linus,
Please pull watchdog updates for Linux v4.16 from signed tag:
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.gitwatchdog-for-linus-v4.16Thanks,
Guenter
------The following changes since commit
f3b5ad89de16f5d42e8ad36fbdf85f705c1ae051:Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma (2017-12-16 13:43:08 -0800)are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.gittags/watchdog-for-linus-v4.16for you to fetch changes up to
592a547adf686dbec7687e816ecdf9101fe227f5:documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt (2018-02-03 11:09:54 +0100)----------------------------------------------------------------
watchdog updates for v4.16 commit window- Converted to use watchdog subsystem:
sp5100_tco, i6300esb,xen_wdt
- New drivers: Spreadtrum, Realtek RTD1295
- Added r8a77970 support to renesas-wdt
- Added jz4780 support to jz4740
- Removedat32ap700x_wdtdriver
- Removed obsolete documentation
- Various bug fixes in watchdog core
- Cleanup and bug fixes in several drivers
- Added Guenter Roeck as co-maintainer----------------------------------------------------------------
Andreas Färber (2):
dt-bindings: watchdog: Add Realtek RTD1295
watchdog: Add Realtek RTD1295Andrew Jeffery (4):
watchdog: aspeed: Retain watchdog enabled state
watchdog: aspeed: Fix 'Apseed' typo inKconfig
watchdog: aspeed: Remove specific reference to AST2400 inKconfig
watchdog: aspeed: Move init toarch_initcallAndré Draszik (2):
watchdog: mt7621: setWDOG_HW_RUNNINGbit when appropriate
watchdog: mt7621: switch to using manageddevm_watchdog_register_device()Arnd Bergmann (2):
watchdog: xen: usetime64_tfor timeouts
watchdog: hpwdt: fix unused variable warningBenjamin Gaignard (1):
watchdog: stm32: Fix copyrightChris Packham (1):
watchdog: orion: fix typoChristophe Leroy (3):
watchdog: mpc8xxx: use the core worker function
watchdog: core: make sure the watchdog worker always works
watchdog: core: make sure thewatchdog_workeris not deferredCorentin Labbe (6):
watchdog:sunxi_wdt: useof_device_get_match_data
watchdog: documentwatchdog_init_timeout()wdd parameter
watchdog: removeat32ap700x_wdt
documentation: watchdog: remove documentation ofat32ap700x_wdt
documentation: watchdog: remove documentation for ixp2000
documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdtDavid Lechner (1):
watchdog:davinci_wdt: add restart functionEric Long (2):
dt-bindings: watchdog: Add Spreadtrum watchdog documentation
watchdog: Add Spreadtrum watchdog driverGeert Uytterhoeven (1):
dt-bindings: watchdog: renesas-wdt: Add support for the r8a77970 wdtGreg Kroah-Hartman (1):
watchdog:pcwd_usb: remove unneededDRIVER_LICENSE#defineGuenter Roeck (15):
watchdog: Fix potential kref imbalance when opening watchdog
watchdog: Fix kref imbalance seen if handle_boot_enabled=0
MAINTAINERS: Add Guenter Roeck as co-maintainer of watchdog subsystem
watchdog:sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG}
watchdog:sp5100_tco: Fix watchdog disable bit
watchdog:sp5100_tco: Userequest_muxed_regionwhere possible
watchdog:sp5100_tco: Use standard error codes
watchdog:sp5100_tco: Clean upsp5100_tco_setupdevice
watchdog:sp5100_tco: Match PCI device early
watchdog:sp5100_tco: Usedev_print functions where possible
watchdog:sp5100_tco: Clean up function and variable names
watchdog:sp5100_tco: Convert to use watchdog subsystem
watchdog:sp5100_tco: Use bit operations
watchdog: sp5100-tco: Abort if watchdog is disabled by hardware
watchdog:sp5100_tco: Add support for recent FCH versionsGustavo A. R. Silva (9):
watchdog: advantechwdt: mark expected switch fall-through
watchdog:alim1535_wdt: mark expected switch fall-through
watchdog:f71808e_wdt: mark expected switch fall-throughs
watchdog:pcwd_usb: mark expected switch fall-through
watchdog:pcwd_pci: mark expected switch fall-through
watchdog:watchdog_dev: mark expected switch fall-through
watchdog:wdt_pci: mark expected switch fall-through
watchdog: eurotechwdt: mark expected switch fall-through
watchdog: ib700wdt: mark expected switch fall-throughJerry Hoemann (2):
watchdog: hpwdt: SMBIOS check
watchdog: hpwdt: Check source of NMILinus Walleij (5):
watchdog: gpio: Add some local helper variables
watchdog: gpio: Convert to use GPIO descriptors
watchdog: gemini/ftwdt010: rename DT bindings
watchdog: gemini/ftwdt010: rename driver and symbols
watchdog: ftwdt010: Make interrupt optionalMartin Kaiser (1):
watchdog:imx2_wdt: restore previous timeout after suspend+resumeMathieu Malaterre (2):
watchdog: jz4740: Add support for the watchdog in jz4780 SoC
dt: watchdog: Document compatibility with JZ4780Matt Redfearn (1):
watchdog: indydog: Add dependency onSGI_HAS_INDYDOGMichael Grzeschik (3):
watchdog: da9062: Add restart handler support
watchdog: da9062: Disable and wait before changing timeout
watchdog: da9062: use protection delay mechanism from coreOleksij Rempel (1):
watchdog:dw_wdt: add stop watchdog operationRadu Rendec (6):
watchdog: i6300esb: use the watchdog subsystem
watchdog: i6300esb: support multiple devices
watchdog: i6300esb: do not hardcode heartbeat limits
watchdog: i6300esb: remove info message and version number
watchdog:xen_wdt: use the watchdog subsystem
watchdog:xen_wdt: remove info message and version numberRasmus Villemoes (1):
watchdog:gpio_wdt: setWDOG_HW_RUNNINGingpio_wdt_stopTomas Winkler (1):
watchdog:mei_wdt: don't use of variable length arrayWim Van Sebroeck (1):
Change my E-mail address..../bindings/watchdog/cortina,gemini-watchdog.txt | 17 - ...ina,gemin-watchdog.txt => faraday,ftwdt010.txt} | 11 +- .../bindings/watchdog/ingenic,jz4740-wdt.txt | 4 +- .../bindings/watchdog/realtek,rtd119x.txt | 17 + .../devicetree/bindings/watchdog/renesas-wdt.txt | 3 +- .../devicetree/bindings/watchdog/sprd-wdt.txt | 19 + Documentation/watchdog/watchdog-parameters.txt | 23 - MAINTAINERS | 4 +- drivers/watchdog/Kconfig | 41 +- drivers/watchdog/Makefile | 7 +- drivers/watchdog/advantechwdt.c | 2 +- drivers/watchdog/alim1535_wdt.c | 2 +- drivers/watchdog/aspeed_wdt.c | 21 +- drivers/watchdog/at32ap700x_wdt.c | 433 ------------- drivers/watchdog/da9062_wdt.c | 48 +- drivers/watchdog/davinci_wdt.c | 38 ++ drivers/watchdog/dw_wdt.c | 18 +- drivers/watchdog/eurotechwdt.c | 2 +- drivers/watchdog/f71808e_wdt.c | 4 +- drivers/watchdog/ftwdt010_wdt.c | 236 +++++++ drivers/watchdog/gemini_wdt.c | 229 ------- drivers/watchdog/gpio_wdt.c | 58 +- drivers/watchdog/hpwdt.c | 12 +- drivers/watchdog/i6300esb.c | 377 ++++------- drivers/watchdog/ib700wdt.c | 2 +- drivers/watchdog/imx2_wdt.c | 20 +- drivers/watchdog/jz4740_wdt.c | 1 + drivers/watchdog/mei_wdt.c | 7 +- drivers/watchdog/mpc8xxx_wdt.c | 83 ++- drivers/watchdog/mt7621_wdt.c | 34 +- drivers/watchdog/orion_wdt.c | 2 +- drivers/watchdog/pcwd_pci.c | 2 +- drivers/watchdog/pcwd_usb.c | 5 +- drivers/watchdog/rtd119x_wdt.c | 168 +++++ drivers/watchdog/sp5100_tco.c | 710 +++++++++------------ drivers/watchdog/sp5100_tco.h | 57 +- drivers/watchdog/sprd_wdt.c | 399 ++++++++++++ drivers/watchdog/stm32_iwdg.c | 6 +- drivers/watchdog/sunxi_wdt.c | 7 +- drivers/watchdog/watchdog_core.c | 1 + drivers/watchdog/watchdog_dev.c | 125 ++-- drivers/watchdog/wdt_pci.c | 2 +- drivers/watchdog/xen_wdt.c | 255 ++------ 43 files changed, 1711 insertions(+), 1801 deletions(-)delete mode 100644
Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txtrenameDocumentation/devicetree/bindings/watchdog/{cortina,gemin-watchdog.txt=> faraday,ftwdt010.txt} (55%) create mode 100644Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt
create mode 100644Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
delete mode 100644drivers/watchdog/at32ap700x_wdt.c
create mode 100644drivers/watchdog/ftwdt010_wdt.c
delete mode 100644drivers/watchdog/gemini_wdt.c
create mode 100644drivers/watchdog/rtd119x_wdt.c
create mode 100644drivers/watchdog/sprd_wdt.c--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html