uClibc-ng testsuite failures
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 10 lines · Waldemar Brodkorb
Quoted 4 lines
Quoted 2 lines
The syscall cancellation failures are still there with gcc 7.3.0 and binutils 2.30. Do you have any patches on top of it?
Are you talking about these results?
https://urldefense.proofpoint.com/v2/url?u=https-3A__downloads.uclibc-2Dng.org_reports_1.0.28_REPORT.arcv2.libc.uClibc-2Dng-2D1.0.28&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=7FgpX6o3vAhwMrMhLh-4ZJey5kjdNUwOL2CWsFwR4T8&m=TsxZS2Izf4LUrQfQCh9Iw8-L0zYXeJLdRhvUfyiWw2A&s=BGT84AxTG_-ymRw4CytOO7g6kTy7PXKYBrHbGF_pTR4&e=No.
Quoted 2 lines
But the link above points to stuff built with gcc 7.2 but not 7.3. Could you please share your results with gcc 7.2 and binutils 2.30?
Here with gcc 7.3.0 and binutils 2.30:
https://urldefense.proofpoint.com/v2/url?u=https-3A__downloads.uclibc-2Dng.org_reports_git_&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=7FgpX6o3vAhwMrMhLh-4ZJey5kjdNUwOL2CWsFwR4T8&m=TsxZS2Izf4LUrQfQCh9Iw8-L0zYXeJLdRhvUfyiWw2A&s=Ni7_rqZq4c0mvnYsOyvZoZEIddMnIOEsSmopG9m9LwU&e=
I ran into similar issues with glibc test suite. It seems gcc 7.x released won't cut it - it misses tons of upstream patches including
2017-11-03 e892f4fac605 [ARC] Fix to unwinding.
So your best bet is to use upstream gcc master !
-Vineet
Hi Vineet,
Vineet Gupta wrote,
Quoted 11 lines · Waldemar Brodkorb
Quoted 9 lines
Quoted 4 lines
Quoted 2 lines
The syscall cancellation failures are still there with gcc 7.3.0 and binutils 2.30. Do you have any patches on top of it?
Are you talking about these results?
https://urldefense.proofpoint.com/v2/url?u=https-3A__downloads.uclibc-2Dng.org_reports_1.0.28_REPORT.arcv2.libc.uClibc-2Dng-2D1.0.28&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=7FgpX6o3vAhwMrMhLh-4ZJey5kjdNUwOL2CWsFwR4T8&m=TsxZS2Izf4LUrQfQCh9Iw8-L0zYXeJLdRhvUfyiWw2A&s=BGT84AxTG_-ymRw4CytOO7g6kTy7PXKYBrHbGF_pTR4&e=No.
Quoted 2 lines
But the link above points to stuff built with gcc 7.2 but not 7.3. Could you please share your results with gcc 7.2 and binutils 2.30?
Here with gcc 7.3.0 and binutils 2.30:
https://urldefense.proofpoint.com/v2/url?u=https-3A__downloads.uclibc-2Dng.org_reports_git_&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=7FgpX6o3vAhwMrMhLh-4ZJey5kjdNUwOL2CWsFwR4T8&m=TsxZS2Izf4LUrQfQCh9Iw8-L0zYXeJLdRhvUfyiWw2A&s=Ni7_rqZq4c0mvnYsOyvZoZEIddMnIOEsSmopG9m9LwU&e=
Quoted 6 lines
I ran into similar issues with glibc test suite. It seems gcc 7.x released won't cut it - it misses tons of upstream patches including
2017-11-03
e892f4fac605[ARC] Fix to unwinding.So your best bet is to use upstream gcc master !
gcc 7 branch or gcc 8 latest greatest?
Last time there was some issue with gcc8 and you told me to use gcc7 with some patches.
/me is confused.
best regards
Waldemar
Quoted 13 lines · Waldemar Brodkorb
Hi Vineet,
Vineet Gupta wrote,Quoted 10 lines · Waldemar Brodkorb
Quoted 9 lines
Quoted 4 lines
Quoted 2 lines
The syscall cancellation failures are still there with gcc 7.3.0 and binutils 2.30. Do you have any patches on top of it?
Are you talking about these results?
https://urldefense.proofpoint.com/v2/url?u=https-3A__downloads.uclibc-2Dng.org_reports_1.0.28_REPORT.arcv2.libc.uClibc-2Dng-2D1.0.28&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=7FgpX6o3vAhwMrMhLh-4ZJey5kjdNUwOL2CWsFwR4T8&m=TsxZS2Izf4LUrQfQCh9Iw8-L0zYXeJLdRhvUfyiWw2A&s=BGT84AxTG_-ymRw4CytOO7g6kTy7PXKYBrHbGF_pTR4&e=No.
Quoted 2 lines
But the link above points to stuff built with gcc 7.2 but not 7.3. Could you please share your results with gcc 7.2 and binutils 2.30?
Here with gcc 7.3.0 and binutils 2.30:
https://urldefense.proofpoint.com/v2/url?u=https-3A__downloads.uclibc-2Dng.org_reports_git_&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=7FgpX6o3vAhwMrMhLh-4ZJey5kjdNUwOL2CWsFwR4T8&m=TsxZS2Izf4LUrQfQCh9Iw8-L0zYXeJLdRhvUfyiWw2A&s=Ni7_rqZq4c0mvnYsOyvZoZEIddMnIOEsSmopG9m9LwU&e=
Quoted 7 lines
Quoted 6 lines
I ran into similar issues with glibc test suite. It seems gcc 7.x released won't cut it - it misses tons of upstream patches including
2017-11-03
e892f4fac605[ARC] Fix to unwinding.So your best bet is to use upstream gcc master !
gcc 7 branch or gcc 8 latest greatest?
AFAIK gcc 8 is not released yet, so upstream/master !
Quoted 2 lines
Last time there was some issue with gcc8 and you told me to use gcc7 with some patches.
Right there was yet another code gen issue / ICE at the time, which is likely gone now. But gcc upstream/master works for me.
Quoted 1 line
/me is confused.
Sorry if I steered you the wrong way. At that time upstream was practically not usable, so more unwinder tests failing were kind of secondary on priority ;-)
-Vineet
Hi Vineet,
Vineet Gupta wrote,
Quoted 6 lines
AFAIK gcc 8 is not released yet, so upstream/master !
Quoted 2 lines
Last time there was some issue with gcc8 and you told me to use gcc7 with some patches.
Quoted 8 lines
Right there was yet another code gen issue / ICE at the time, which is likely gone now. But gcc upstream/master works for me.
Quoted 1 line
/me is confused.
Sorry if I steered you the wrong way. At that time upstream was practically not usable, so more unwinder tests failing were kind of secondary on priority ;-)
Now I have again the original ICE with gcc upstream/master as reported last time. What's wrong with my setup?
best regards
Waldemar
Hi Waldemar,
Quoted 25 lines · Waldemar Brodkorb
Hi Vineet,
Vineet Gupta wrote,Quoted 22 lines · Waldemar Brodkorb
Quoted 8 lines
Quoted 7 lines
Quoted 2 lines
The syscall cancellation failures are still there with gcc 7.3.0 and binutils 2.30. Do you have any patches on top of it?
Are you talking about these results?
https://urldefense.proofpoint.com/v2/url?u=https-3A__downloads.uclibc-2Dng.org_reports_1.0.28_REPORT.arcv2.libc.uClibc-2Dng-2D1.0.28&d=DwIBaQ&
c=DPL6_X_6JkXFx7AXWqB0tg&r=7FgpX6o3vAhwMrMhLh-4ZJey5kjdNUwOL2CWsFwR4T8&m=TsxZS2Izf4LUrQfQCh9Iw8-L0zYXeJLdRhvUfyiWw2A&s=BGT84AxTG_- ymRw4CytOO7g6kTy7PXKYBrHbGF_pTR4&e=Quoted 7 lines
No.
Quoted 2 lines
But the link above points to stuff built with gcc 7.2 but not 7.3. Could you please share your results with gcc 7.2 and binutils 2.30?
Here with gcc 7.3.0 and binutils 2.30:
https://urldefense.proofpoint.com/v2/url?u=https-3A__downloads.uclibc-2Dng.org_reports_git_&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=7FgpX6o3vAhwMrMh
Lh-4ZJey5kjdNUwOL2CWsFwR4T8&m=TsxZS2Izf4LUrQfQCh9Iw8-L0zYXeJLdRhvUfyiWw2A&s=Ni7_rqZq4c0mvnYsOyvZoZEIddMnIOEsSmopG9m9LwU&e=I ran into similar issues with glibc test suite. It seems gcc 7.x released won't cut it - it misses tons of upstream patches including
2017-11-03
e892f4fac605[ARC] Fix to unwinding.
Quoted 8 lines
Quoted 1 line
So your best bet is to use upstream gcc master !
gcc 7 branch or gcc 8 latest greatest?
Last time there was some issue with gcc8 and you told me to use gcc7 with some patches.
/me is confused.
Could you please elaborate a bit on how do you build ARC toolchain? That way we'll try to reproduce your problem locally.
Also may I ask you to try the very latest GCC and Binutils from
GCC: https://github.com/foss-for-synopsys-dwc-arc-processors/gcc/tree/dev
Binutils: https://github.com/foss-for-synopsys-dwc-arc-processors/binutils-gdb/tree/arc-2018.03
With these sources I can build everything successfully and run entire test-suite with that following results:
-------------->8------------
Total skipped: 15
Total failed: 19
Total passed: 397
-------------->8------------
-Alexey
Hi Alexey,
Alexey Brodkin wrote,
Quoted 46 lines
Hi Waldemar,
Quoted 25 lines · Waldemar Brodkorb
Hi Vineet,
Vineet Gupta wrote,Quoted 22 lines · Waldemar Brodkorb
Quoted 8 lines
Quoted 7 lines
Quoted 2 lines
The syscall cancellation failures are still there with gcc 7.3.0 and binutils 2.30. Do you have any patches on top of it?
Are you talking about these results?
https://urldefense.proofpoint.com/v2/url?u=https-3A__downloads.uclibc-2Dng.org_reports_1.0.28_REPORT.arcv2.libc.uClibc-2Dng-2D1.0.28&d=DwIBaQ&
c=DPL6_X_6JkXFx7AXWqB0tg&r=7FgpX6o3vAhwMrMhLh-4ZJey5kjdNUwOL2CWsFwR4T8&m=TsxZS2Izf4LUrQfQCh9Iw8-L0zYXeJLdRhvUfyiWw2A&s=BGT84AxTG_- ymRw4CytOO7g6kTy7PXKYBrHbGF_pTR4&e=Quoted 7 lines
No.
Quoted 2 lines
But the link above points to stuff built with gcc 7.2 but not 7.3. Could you please share your results with gcc 7.2 and binutils 2.30?
Here with gcc 7.3.0 and binutils 2.30:
https://urldefense.proofpoint.com/v2/url?u=https-3A__downloads.uclibc-2Dng.org_reports_git_&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=7FgpX6o3vAhwMrMh
Lh-4ZJey5kjdNUwOL2CWsFwR4T8&m=TsxZS2Izf4LUrQfQCh9Iw8-L0zYXeJLdRhvUfyiWw2A&s=Ni7_rqZq4c0mvnYsOyvZoZEIddMnIOEsSmopG9m9LwU&e=I ran into similar issues with glibc test suite. It seems gcc 7.x released won't cut it - it misses tons of upstream patches including
2017-11-03
e892f4fac605[ARC] Fix to unwinding.Quoted 8 lines
Quoted 1 line
So your best bet is to use upstream gcc master !
gcc 7 branch or gcc 8 latest greatest?
Last time there was some issue with gcc8 and you told me to use gcc7 with some patches.
/me is confused.
Could you please elaborate a bit on how do you build ARC toolchain? That way we'll try to reproduce your problem locally.
Also may I ask you to try the very latest GCC and Binutils from
GCC: https://github.com/foss-for-synopsys-dwc-arc-processors/gcc/tree/dev
Binutils: https://github.com/foss-for-synopsys-dwc-arc-processors/binutils-gdb/tree/arc-2018.03
Quoted 7 lines
With these sources I can build everything successfully and run entire test-suite with that following results:
-------------->8------------
Total skipped: 15
Total failed: 19
Total passed: 397
-------------->8------------
Yes, that are the results I get when using the synopsys sources. My idea is to forecast the results with upstream binutils and gcc in the hope everything will be fine when gcc8 and binutils 2.31 is released.
Here is the full log using binutils/gcc git master:
https://debug.openadk.org/arc/arc-gcc-git-make.log
best regards
Waldemar
Hi Waldemar,
The GCC master branch can be broken from time to time, and this is the reason why we get a snapshot in our Synopsys git account for testing and stability. But once we get the gcc 8.x release, this shouldn't be the case, and you can use the official release with maybe some 1-2 extra patches on top. As for Binutils mainline master version, we discovered a number of issues which needs to be addressed on our side. The good news is we have patches which we are testing them right now, and I expect those patches to be quickly send to binutils mailing list and integrated once we have the confidence we brake nothing extra:)
Cheers,
Claudiu
________________________________________
From: Waldemar Brodkorb [[email protected]]
Sent: Wednesday, March 07, 2018 9:10 PM
To: Alexey Brodkin
Cc: wbx at uclibc-ng.org; Claudiu.Zissulescu at synopsys.com; Vineet.Gupta1 at synopsys.com; Cupertino.Miranda at synopsys.com; linux-snps-arc at lists.infradead.org
Subject: Re: uClibc-ng testsuite failures
Hi Alexey,
Alexey Brodkin wrote,
Quoted 46 lines
Hi Waldemar,
Quoted 25 lines · Waldemar Brodkorb
Hi Vineet,
Vineet Gupta wrote,Quoted 22 lines · Waldemar Brodkorb
Quoted 8 lines
Quoted 7 lines
Quoted 2 lines
The syscall cancellation failures are still there with gcc 7.3.0 and binutils 2.30. Do you have any patches on top of it?
Are you talking about these results?
https://urldefense.proofpoint.com/v2/url?u=https-3A__downloads.uclibc-2Dng.org_reports_1.0.28_REPORT.arcv2.libc.uClibc-2Dng-2D1.0.28&d=DwIBaQ&
c=DPL6_X_6JkXFx7AXWqB0tg&r=7FgpX6o3vAhwMrMhLh-4ZJey5kjdNUwOL2CWsFwR4T8&m=TsxZS2Izf4LUrQfQCh9Iw8-L0zYXeJLdRhvUfyiWw2A&s=BGT84AxTG_- ymRw4CytOO7g6kTy7PXKYBrHbGF_pTR4&e=Quoted 7 lines
No.
Quoted 2 lines
But the link above points to stuff built with gcc 7.2 but not 7.3. Could you please share your results with gcc 7.2 and binutils 2.30?
Here with gcc 7.3.0 and binutils 2.30:
https://urldefense.proofpoint.com/v2/url?u=https-3A__downloads.uclibc-2Dng.org_reports_git_&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=7FgpX6o3vAhwMrMh
Lh-4ZJey5kjdNUwOL2CWsFwR4T8&m=TsxZS2Izf4LUrQfQCh9Iw8-L0zYXeJLdRhvUfyiWw2A&s=Ni7_rqZq4c0mvnYsOyvZoZEIddMnIOEsSmopG9m9LwU&e=I ran into similar issues with glibc test suite. It seems gcc 7.x released won't cut it - it misses tons of upstream patches including
2017-11-03
e892f4fac605[ARC] Fix to unwinding.Quoted 8 lines
Quoted 1 line
So your best bet is to use upstream gcc master !
gcc 7 branch or gcc 8 latest greatest?
Last time there was some issue with gcc8 and you told me to use gcc7 with some patches.
/me is confused.
Could you please elaborate a bit on how do you build ARC toolchain? That way we'll try to reproduce your problem locally.
Also may I ask you to try the very latest GCC and Binutils from
GCC: https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_foss-2Dfor-2Dsynopsys-2Ddwc-2Darc-2Dprocessors_gcc_tree_dev&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=vsTQvy464niXQOCG9XdhJKeuxCBV79v90MX02K5iS8c&m=_qQm4vhacQM7bpvyZpeTGtLVQgNJjGuNoIu2MvUPZtk&s=newu1wiEsGLnIQEDEu46XlHB6VWi0brY-2QsKEOKQB0&e=
Binutils: https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_foss-2Dfor-2Dsynopsys-2Ddwc-2Darc-2Dprocessors_binutils-2Dgdb_tree_arc-2D2018.03&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=vsTQvy464niXQOCG9XdhJKeuxCBV79v90MX02K5iS8c&m=_qQm4vhacQM7bpvyZpeTGtLVQgNJjGuNoIu2MvUPZtk&s=k_NRmaNGVWc_ZubuKXGnT6r7r6EpntzQKDPFKbvH9hk&e=
Quoted 7 lines
With these sources I can build everything successfully and run entire test-suite with that following results:
-------------->8------------
Total skipped: 15
Total failed: 19
Total passed: 397
-------------->8------------
Yes, that are the results I get when using the synopsys sources. My idea is to forecast the results with upstream binutils and gcc in the hope everything will be fine when gcc8 and binutils 2.31 is released.
Here is the full log using binutils/gcc git master:
https://urldefense.proofpoint.com/v2/url?u=https-3A__debug.openadk.org_arc_arc-2Dgcc-2Dgit-2Dmake.log&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=vsTQvy464niXQOCG9XdhJKeuxCBV79v90MX02K5iS8c&m=_qQm4vhacQM7bpvyZpeTGtLVQgNJjGuNoIu2MvUPZtk&s=uwHpsnYFIE23M9pCrxMIBu0QjlYriNeX6J54uYQWk7g&e=
best regards
Waldemar