Skip to contentSkip to conversation

drm/i915: Add and enable DP AUX CH mutex

PATCH Superseded José Roberto de Souza 4 participants 6 messages Feb 26, 2018 – Feb 27, 2018

Subsystems (2)

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v4 cover drm/i915: Add and enable DP AUX CH mutex

v2
- removed the PSR dependency, now getting lock all the times when available
- renamed functions to avoid nested calls
- moved register bits right after the DP_AUX_CH_MUTEX()
- removed 'drm/i915: keep AUX powered while PSR is enabled' Dhinakaran Pandiyan will sent a better and final version v3
- rebased on top of Ville's AUX series
- moved port registers to above DP_AUX_CH_MUTEX()
- using intel_wait_for_register() instead of the internal version
v4
- removed virtual function to get mutex register address
- enabling the mutex back only on aux channel init
- added the aux channel name to the timeout debug message

José Roberto de Souza (1):
drm/i915/skl+: Add and enable DP AUX CH mutex

 drivers/gpu/drm/i915/i915_reg.h |  9 ++++++++
 drivers/gpu/drm/i915/intel_dp.c | 47 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+)
Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v4 1/1 drm/i915/skl+: Add and enable DP AUX CH mutex

When PSR/PSR2/GTC is enabled hardware can do AUX transactions by it self, so lets use the mutex register that is available in gen9+ to avoid concurrent access by hardware and driver.
Older gen handling will be done separated.

Reference: https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-skl-vol12-display.pdf
Page 198 - AUX programming sequence

Cc Rodrigo Vivi <[email protected]>
Cc Jani Nikula <[email protected]>
Cc Dhinakaran Pandiyan <[email protected]>
Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h |  9 ++++++++
 drivers/gpu/drm/i915/intel_dp.c | 47 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +9 -0
index eea5b2c537d4..f36e839b4b4f 100644
@@ -5385,6 +5385,15 @@ enum {
 #define   DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(c) (((c) - 1) << 5)
 #define   DP_AUX_CH_CTL_SYNC_PULSE_SKL(c)   ((c) - 1)
 
+#define _DPA_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6402C)
+#define _DPB_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6412C)
+#define _DPC_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6422C)
+#define _DPD_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6432C)
+#define _DPF_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6452C)
+#define DP_AUX_CH_MUTEX(port)	_MMIO_PORT(port, _DPA_AUX_CH_MUTEX, _DPB_AUX_CH_MUTEX)
+#define   DP_AUX_CH_MUTEX_ENABLE		(1 << 31)
+#define   DP_AUX_CH_MUTEX_STATUS		(1 << 30)
+
 /*
  * Computing GMCH M and N values for the Display Port link
  *
drivers/gpu/drm/i915/intel_dp.c +47 -0

71 lines not on this page · raw message

Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer Reviewed-by on v4 1/1
#2 lore raw

Re: [PATCH v4 1/1] drm/i915/skl+: Add and enable DP AUX CH mutex

Quoted 23 lines · José Roberto de Souza

When PSR/PSR2/GTC is enabled hardware can do AUX transactions by it self, so lets use the mutex register that is available in gen9+ to avoid concurrent access by hardware and driver.
Older gen handling will be done separated.

Reference: https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-skl-vol12-display.pdf
Page 198 - AUX programming sequence

Cc Rodrigo Vivi <[email protected]>
Cc Jani Nikula <[email protected]>
Cc Dhinakaran Pandiyan <[email protected]>
Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h |  9 ++++++++
 drivers/gpu/drm/i915/intel_dp.c | 47 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +0 -0
index eea5b2c537d4..f36e839b4b4f 100644

drivers/gpu/drm/i915/i915_reg.h enum { · line 5393

Quoted 9 lines
drivers/gpu/drm/i915/i915_reg.h +6 -0
@@ -5385,6 +5385,15 @@ enum {
 #define   DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(c) (((c) - 1) << 5)
 #define   DP_AUX_CH_CTL_SYNC_PULSE_SKL(c)   ((c) - 1)
 
+#define _DPA_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6402C)
+#define _DPB_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6412C)
+#define _DPC_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6422C)
+#define _DPD_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6432C)
+#define _DPF_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6452C)
+#define DP_AUX_CH_MUTEX(port)	_MMIO_PORT(port, _DPA_AUX_CH_MUTEX, _DPB_AUX_CH_MUTEX)

s/port/aux_ch

Quoted 54 lines
drivers/gpu/drm/i915/i915_reg.h +3 -0
+#define   DP_AUX_CH_MUTEX_ENABLE		(1 << 31)
+#define   DP_AUX_CH_MUTEX_STATUS		(1 << 30)
+
 /*
  * Computing GMCH M and N values for the Display Port link
  *
drivers/gpu/drm/i915/intel_dp.c +36 -0
index 2c3eb90b9499..7004239e4c9e 100644
@@ -1081,6 +1081,42 @@ static uint32_t intel_dp_get_aux_send_ctl(struct intel_dp *intel_dp,
 						aux_clock_divider);
 }
 
+static bool intel_dp_aux_ch_trylock(struct intel_dp *intel_dp)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_i915_private *dev_priv =
+			to_i915(intel_dig_port->base.base.dev);
+
+	if (INTEL_GEN(dev_priv) < 9)
+		return true;
+
+	/* Spec says that mutex is acquired when status bit is read as unset,
+	 * here waiting for 2msec(+-4 aux transactions) before give up.
+	 */
+	if (intel_wait_for_register(dev_priv, DP_AUX_CH_MUTEX(intel_dp->aux_ch),
+				    DP_AUX_CH_MUTEX_STATUS, 0, 2)) {
+		DRM_DEBUG_KMS("aux channel %c locked for 2msec, timing out\n",
+			      aux_ch_name(intel_dp->aux_ch));
+		return false;
+	}
+
+	return true;
+}
+
+static void intel_dp_aux_ch_unlock(struct intel_dp *intel_dp)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_i915_private *dev_priv =
+			to_i915(intel_dig_port->base.base.dev);
+
+	if (INTEL_GEN(dev_priv) < 9)
+		return;
+
+	/* set the status bit releases the mutex + keeping mutex enabled */
+	I915_WRITE(DP_AUX_CH_MUTEX(intel_dp->aux_ch),
+		   DP_AUX_CH_MUTEX_ENABLE | DP_AUX_CH_MUTEX_STATUS);
+}
+
 static int
 intel_dp_aux_ch(struct intel_dp *intel_dp,
 		const uint8_t *send, int send_bytes,

drivers/gpu/drm/i915/intel_dp.c intel_dp_aux_ch(struct intel_dp *intel_dp, · line 1160

Quoted 6 lines
drivers/gpu/drm/i915/intel_dp.c +3 -0
@@ -1119,6 +1155,11 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 
 	intel_dp_check_edp(intel_dp);
 
+	if (!intel_dp_aux_ch_trylock(intel_dp)) {
+		ret = -EBUSY;
+		goto out_locked;

out_"locked" confused me here...

not sure about a better name...

maybe out_aux_unlocked ?! :/

Quoted 15 lines
drivers/gpu/drm/i915/intel_dp.c +4 -0
+	}
+
 	/* Try to wait for any previous AUX channel activity */
 	for (try = 0; try < 3; try++) {
 		status = I915_READ_NOTRACE(ch_ctl);
@@ -1248,6 +1289,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 
 	ret = recv_bytes;
 out:
+	intel_dp_aux_ch_unlock(intel_dp);
+out_locked:
 	pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE);
 
 	if (vdd)

drivers/gpu/drm/i915/intel_dp.c intel_dp_aux_init(struct intel_dp *intel_dp) · line 1593

Quoted 7 lines
drivers/gpu/drm/i915/intel_dp.c +4 -0
@@ -1544,6 +1587,10 @@ intel_dp_aux_init(struct intel_dp *intel_dp)
 	else
 		intel_dp->get_aux_send_ctl = g4x_get_aux_send_ctl;
 
+	if (INTEL_GEN(dev_priv) >= 9)
+		I915_WRITE(DP_AUX_CH_MUTEX(intel_dp->aux_ch),
+			   DP_AUX_CH_MUTEX_ENABLE);
+

Cool! I believe we are in a good shape now...

with s/port/aux_ch corrected and preferably with a better goto out name:

Quoted 6 lines
drivers/gpu/drm/i915/intel_dp.c +0 -0
 	drm_dp_aux_init(&intel_dp->aux);
 
 	/* Failure to allocate our preferred name is not critical */
Signature · 1 line
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw

Re: [PATCH v4 1/1] drm/i915/skl+: Add and enable DP AUX CH mutex

Quoted 61 lines · Rodrigo Vivi
Quoted 23 lines · José Roberto de Souza

When PSR/PSR2/GTC is enabled hardware can do AUX transactions by it self, so lets use the mutex register that is available in gen9+ to avoid concurrent access by hardware and driver.
Older gen handling will be done separated.

Reference: https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-skl-vol12-display.pdf
Page 198 - AUX programming sequence

Cc Rodrigo Vivi <[email protected]>
Cc Jani Nikula <[email protected]>
Cc Dhinakaran Pandiyan <[email protected]>
Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h |  9 ++++++++
 drivers/gpu/drm/i915/intel_dp.c | 47 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +0 -0
index eea5b2c537d4..f36e839b4b4f 100644

drivers/gpu/drm/i915/i915_reg.h enum { · line 5393

Quoted 9 lines
drivers/gpu/drm/i915/i915_reg.h +6 -0
@@ -5385,6 +5385,15 @@ enum {
 #define   DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(c) (((c) - 1) << 5)
 #define   DP_AUX_CH_CTL_SYNC_PULSE_SKL(c)   ((c) - 1)
 
+#define _DPA_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6402C)
+#define _DPB_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6412C)
+#define _DPC_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6422C)
+#define _DPD_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6432C)
+#define _DPF_AUX_CH_MUTEX	(dev_priv->info.display_mmio_offset + 0x6452C)
+#define DP_AUX_CH_MUTEX(port)	_MMIO_PORT(port, _DPA_AUX_CH_MUTEX, _DPB_AUX_CH_MUTEX)

s/port/aux_ch

Quoted 25 lines
drivers/gpu/drm/i915/i915_reg.h +3 -0
+#define   DP_AUX_CH_MUTEX_ENABLE		(1 << 31)
+#define   DP_AUX_CH_MUTEX_STATUS		(1 << 30)
+
 /*
  * Computing GMCH M and N values for the Display Port link
  *
drivers/gpu/drm/i915/intel_dp.c +11 -0
index 2c3eb90b9499..7004239e4c9e 100644
@@ -1081,6 +1081,42 @@ static uint32_t intel_dp_get_aux_send_ctl(struct intel_dp *intel_dp,
 						aux_clock_divider);
 }
 
+static bool intel_dp_aux_ch_trylock(struct intel_dp *intel_dp)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_i915_private *dev_priv =
+			to_i915(intel_dig_port->base.base.dev);
+
+	if (INTEL_GEN(dev_priv) < 9)
+		return true;
+
+	/* Spec says that mutex is acquired when status bit is read as unset,
+	 * here waiting for 2msec(+-4 aux transactions) before give up.
Quoted 8 lines

drivers/gpu/drm/i915/intel_dp.c static uint32_t intel_dp_get_aux_send_ctl(struct intel_dp *intel_dp, · line 1102

Quoted 8 lines
drivers/gpu/drm/i915/intel_dp.c +8 -0
+	 */
+	if (intel_wait_for_register(dev_priv, DP_AUX_CH_MUTEX(intel_dp->aux_ch),
+				    DP_AUX_CH_MUTEX_STATUS, 0, 2)) {
+		DRM_DEBUG_KMS("aux channel %c locked for 2msec, timing out\n",
+			      aux_ch_name(intel_dp->aux_ch));
+		return false;
+	}
+

With nits that Rodrigo pointed out addressed, feel free to use

Btw for future reference, including change log in the commit message is a good idea in the absence of a cover letter.

Quoted 59 lines
Quoted 21 lines
drivers/gpu/drm/i915/intel_dp.c +17 -0
+	return true;
+}
+
+static void intel_dp_aux_ch_unlock(struct intel_dp *intel_dp)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_i915_private *dev_priv =
+			to_i915(intel_dig_port->base.base.dev);
+
+	if (INTEL_GEN(dev_priv) < 9)
+		return;
+
+	/* set the status bit releases the mutex + keeping mutex enabled */
+	I915_WRITE(DP_AUX_CH_MUTEX(intel_dp->aux_ch),
+		   DP_AUX_CH_MUTEX_ENABLE | DP_AUX_CH_MUTEX_STATUS);
+}
+
 static int
 intel_dp_aux_ch(struct intel_dp *intel_dp,
 		const uint8_t *send, int send_bytes,

drivers/gpu/drm/i915/intel_dp.c intel_dp_aux_ch(struct intel_dp *intel_dp, · line 1160

Quoted 6 lines
drivers/gpu/drm/i915/intel_dp.c +3 -0
@@ -1119,6 +1155,11 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 
 	intel_dp_check_edp(intel_dp);
 
+	if (!intel_dp_aux_ch_trylock(intel_dp)) {
+		ret = -EBUSY;
+		goto out_locked;

out_"locked" confused me here...

not sure about a better name...

maybe out_aux_unlocked ?! :/

Quoted 15 lines
drivers/gpu/drm/i915/intel_dp.c +4 -0
+	}
+
 	/* Try to wait for any previous AUX channel activity */
 	for (try = 0; try < 3; try++) {
 		status = I915_READ_NOTRACE(ch_ctl);
@@ -1248,6 +1289,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 
 	ret = recv_bytes;
 out:
+	intel_dp_aux_ch_unlock(intel_dp);
+out_locked:
 	pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE);
 
 	if (vdd)

drivers/gpu/drm/i915/intel_dp.c intel_dp_aux_init(struct intel_dp *intel_dp) · line 1593

Quoted 7 lines
drivers/gpu/drm/i915/intel_dp.c +4 -0
@@ -1544,6 +1587,10 @@ intel_dp_aux_init(struct intel_dp *intel_dp)
 	else
 		intel_dp->get_aux_send_ctl = g4x_get_aux_send_ctl;
 
+	if (INTEL_GEN(dev_priv) >= 9)
+		I915_WRITE(DP_AUX_CH_MUTEX(intel_dp->aux_ch),
+			   DP_AUX_CH_MUTEX_ENABLE);
+

Cool! I believe we are in a good shape now...

Quoted 10 lines

with s/port/aux_ch corrected and preferably with a better goto out name:

Quoted 6 lines
drivers/gpu/drm/i915/intel_dp.c +0 -0
 	drm_dp_aux_init(&intel_dp->aux);
 
 	/* Failure to allocate our preferred name is not critical */
Signature · 1 line
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#4 lore raw

✓ Fi.CI.BAT: success for drm/i915: Add and enable DP AUX CH mutex (rev3)

In reply to José Roberto de Souza
== Series Details ==

== Series Details ==

Series: drm/i915: Add and enable DP AUX CH mutex (rev3)
URL : https://patchwork.freedesktop.org/series/38655/
State : success

== Summary ==

Series 38655v3 drm/i915: Add and enable DP AUX CH mutex
https://patchwork.freedesktop.org/api/1.0/series/38655/revisions/3/mbox/

---- Known issues:

Test debugfs_test:

        Subgroup read_all_entries:
                incomplete -> PASS       (fi-snb-2520m) fdo#103713 +1

fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713

fi-bdw-5557u     total:288  pass:267  dwarn:0   dfail:0   fail:0   skip:21  time:424s
fi-bdw-gvtdvm    total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:426s
fi-blb-e6850     total:288  pass:223  dwarn:1   dfail:0   fail:0   skip:64  time:376s
fi-bsw-n3050     total:288  pass:242  dwarn:0   dfail:0   fail:0   skip:46  time:493s
fi-bwr-2160      total:288  pass:183  dwarn:0   dfail:0   fail:0   skip:105 time:289s
fi-bxt-dsi       total:288  pass:258  dwarn:0   dfail:0   fail:0   skip:30  time:479s
fi-bxt-j4205     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:480s
fi-byt-j1900     total:288  pass:253  dwarn:0   dfail:0   fail:0   skip:35  time:471s
fi-byt-n2820     total:288  pass:249  dwarn:0   dfail:0   fail:0   skip:39  time:456s
fi-cfl-8700k     total:288  pass:260  dwarn:0   dfail:0   fail:0   skip:28  time:395s
fi-cfl-s2        total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:578s
fi-cnl-y3        total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:573s
fi-elk-e7500     total:288  pass:229  dwarn:0   dfail:0   fail:0   skip:59  time:418s
fi-gdg-551       total:288  pass:179  dwarn:0   dfail:0   fail:1   skip:108 time:296s
fi-glk-1         total:288  pass:260  dwarn:0   dfail:0   fail:0   skip:28  time:515s
fi-hsw-4770      total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:387s
fi-ilk-650       total:288  pass:228  dwarn:0   dfail:0   fail:0   skip:60  time:411s
fi-ivb-3520m     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:444s
fi-ivb-3770      total:288  pass:255  dwarn:0   dfail:0   fail:0   skip:33  time:409s
fi-kbl-7500u     total:288  pass:263  dwarn:1   dfail:0   fail:0   skip:24  time:451s
fi-kbl-7560u     total:288  pass:269  dwarn:0   dfail:0   fail:0   skip:19  time:490s
fi-kbl-7567u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:448s
fi-kbl-r         total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:497s
fi-pnv-d510      total:288  pass:222  dwarn:1   dfail:0   fail:0   skip:65  time:594s
fi-skl-6260u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:425s
fi-skl-6600u     total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:501s
fi-skl-6700hq    total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:521s
fi-skl-6700k2    total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:490s
fi-skl-6770hq    total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:466s
fi-skl-guc       total:288  pass:260  dwarn:0   dfail:0   fail:0   skip:28  time:405s
fi-skl-gvtdvm    total:288  pass:265  dwarn:0   dfail:0   fail:0   skip:23  time:432s
fi-snb-2520m     total:245  pass:211  dwarn:0   dfail:0   fail:0   skip:33 
fi-snb-2600      total:288  pass:248  dwarn:0   dfail:0   fail:0   skip:40  time:392s

3a86cab5785058d50346e5a26f51dacbaab29c2e drm-tip: 2018y-02m-26d-15h-41m-02s UTC integration manifest 0e9c7c490026 drm/i915/skl+: Add and enable DP AUX CH mutex

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8164/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#5 lore raw

✓ Fi.CI.IGT: success for drm/i915: Add and enable DP AUX CH mutex (rev3)

In reply to José Roberto de Souza
== Series Details ==

== Series Details ==

Series: drm/i915: Add and enable DP AUX CH mutex (rev3)
URL : https://patchwork.freedesktop.org/series/38655/
State : success

== Summary ==

---- Known issues:

Test kms_flip:

        Subgroup dpms-vs-vblank-race-interruptible:
                fail       -> PASS       (shard-hsw) fdo#103060
        Subgroup plain-flip-fb-recreate-interruptible:
                fail       -> PASS       (shard-hsw) fdo#100368
Test kms_flip_tiling:
        Subgroup flip-yf-tiled:
                fail       -> PASS       (shard-apl) fdo#103822
Test kms_plane:
        Subgroup plane-position-hole-dpms-pipe-b-planes:
                pass       -> FAIL       (shard-apl) fdo#103166
Test kms_rotation_crc:
        Subgroup primary-rotation-180:
                fail       -> PASS       (shard-hsw) fdo#103925

fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103822 https://bugs.freedesktop.org/show_bug.cgi?id=103822
fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
fdo#103925 https://bugs.freedesktop.org/show_bug.cgi?id=103925

shard-apl        total:3460 pass:1818 dwarn:1   dfail:0   fail:8   skip:1632 time:12309s
shard-hsw        total:3460 pass:1767 dwarn:1   dfail:0   fail:1   skip:1690 time:11824s
shard-snb        total:3460 pass:1359 dwarn:1   dfail:0   fail:1   skip:2099 time:6658s

Blacklisted hosts:
shard-kbl total:3460 pass:1944 dwarn:1 dfail:0 fail:7 skip:1508 time:9631s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8164/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx