Skip to contentSkip to conversation

yocto jethro failed on gettext-native

DISCUSSION Oliver Graute 7 participants 17 messages Apr 25, 2018 – May 3, 2018 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hello list,

I try to compile yocto jethro environment which is working on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04.

The compilations stops on gettext-native.

bitbake -k fsl-image-mfgtool-initramfs

make[5]: Entering directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools/src'

| ../x86_64-linux-libtool  --tag=CC   --mode=link gcc   -isystem/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/include -O2 -pipe -release 0.19.4 ../gnulib-lib/libgettextlib.la  -lc -no-undefined  -L/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib -L/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib -Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib -Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib -Wl,-O1 -o libgettextsrc.la -rpath /home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib libgettextsrc_la-message.lo libgettextsrc_la-po-error.lo libgettextsrc_la-po-xerror.lo libgettextsrc_la-read-catalog-abstract.lo libgettextsrc_la-po-lex.lo libgettextsrc_la-po-gram-gen.lo libgettextsrc_la-po-charset.lo libgettextsrc_la-read-po.lo libgettextsrc_la-read-properties.lo libgettextsrc_la-read-stringtable.lo libgettextsrc_la-open-catalog.lo libgettextsrc_la-dir-list.lo libgettextsrc_la-str-list.lo libgettextsrc_la-read-catalog.lo libgettextsrc_la-color.lo libgettextsrc_la-write-catalog.lo libgettextsrc_la-write-properties.lo libgettextsrc_la-write-stringtable.lo libgettextsrc_la-write-po.lo libgettextsrc_la-msgl-ascii.lo libgettextsrc_la-msgl-iconv.lo libgettextsrc_la-msgl-equal.lo libgettextsrc_la-msgl-cat.lo libgettextsrc_la-msgl-header.lo libgettextsrc_la-msgl-english.lo libgettextsrc_la-msgl-check.lo libgettextsrc_la-file-list.lo libgettextsrc_la-msgl-charset.lo libgettextsrc_la-po-time.lo libgettextsrc_la-plural-exp.lo libgettextsrc_la-plural-eval.lo libgettextsrc_la-plural-table.lo libgettextsrc_la-format.lo libgettextsrc_la-format-c.lo libgettextsrc_la-format-sh.lo libgettextsrc_la-format-python.lo libgettextsrc_la-format-python-brace.lo libgettextsrc_la-format-lisp.lo libgettextsrc_la-format-elisp.lo libgettextsrc_la-format-librep.lo libgettextsrc_la-format-scheme.lo libgettextsrc_la-format-java.lo libgettextsrc_la-format-csharp.lo libgettextsrc_la-format-awk.lo libgettextsrc_la-format-pascal.lo libgettextsrc_la-format-ycp.lo libgettextsrc_la-format-tcl.lo libgettextsrc_la-format-perl.lo libgettextsrc_la-format-perl-brace.lo libgettextsrc_la-format-php.lo libgettextsrc_la-format-gcc-internal.lo libgettextsrc_la-format-gfc-internal.lo libgettextsrc_la-format-qt.lo libgettextsrc_la-format-qt-plural.lo libgettextsrc_la-format-kde.lo libgettextsrc_la-format-boost.lo libgettextsrc_la-format-lua.lo libgettextsrc_la-format-javascript.lo libgettextsrc_la-read-desktop.lo
| x86_64-linux-libtool:   error: 'libgettextsrc_la-message.lo' is not a valid libtool object
| Makefile:2285: recipe for target 'libgettextsrc.la' failed
| make[5]: *** [libgettextsrc.la] Error 1
| make[5]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools/src'
| Makefile:2206: recipe for target 'all' failed
| make[4]: *** [all] Error 2
| make[4]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools/src'
| Makefile:1698: recipe for target 'all-recursive' failed
| make[3]: *** [all-recursive] Error 1
| make[3]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools'
| Makefile:1564: recipe for target 'all' failed
| make[2]: *** [all] Error 2
| make[2]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools'
| Makefile:380: recipe for target 'all-recursive' failed
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build'
| Makefile:336: recipe for target 'all' failed
| make: *** [all] Error 2
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (log file is located at /home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/temp/log.do_compile.5336)

ERROR: Task 531 (virtual:native:/home/us/build/os-poky/meta/recipes-core/gettext/gettext_0.19.4.bb, do_compile) failed with exit code '1'

I already tried to reinstall libtool but without success.

Some ideas whats the cause for this error?

Best regards,

Oliver

#1 lore raw
Quoted 2 lines

I try to compile yocto jethro environment which is working on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .

What would be the benefit for the successful compiling of YOCTO Jethro on Kubuntu 16.04 over Ubuntu 14.04???

Zoran
_______

Quoted 102 lines · Oliver Graute

Hello list,

I try to compile yocto jethro environment which is working on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04.

The compilations stops on gettext-native.

bitbake -k fsl-image-mfgtool-initramfs

make[5]: Entering directory '/home/us/build-imx6ulevk-
mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/ build/gettext-tools/src'
| ../x86_64-linux-libtool --tag=CC --mode=link gcc
-isystem/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/include

(quoted diff) +0 -8
-O2 -pipe -release 0.19.4 ../gnulib-lib/libgettextlib.la  -lc
-no-undefined  -L/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib
-L/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib
-Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib
-Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib
-Wl,-O1 -o libgettextsrc.la -rpath /home/us/build-imx6ulevk-

mfgtool/tmp/sysroots/x86_64-linux/usr/lib libgettextsrc_la-message.lo libgettextsrc_la-po-error.lo libgettextsrc_la-po-xerror.lo libgettextsrc_la-read-catalog-abstract.lo libgettextsrc_la-po-lex.lo libgettextsrc_la-po-gram-gen.lo libgettextsrc_la-po-charset.lo libgettex
tsrc_la-read-po.lo libgettextsrc_la-read-properties.lo
libgettextsrc_la-read-stringtable.lo libgettextsrc_la-open-catalog.lo libgettextsrc_la-dir-list.lo libgettextsrc_la-str-list.lo libgettextsrc_la-read-catalog.lo libgettextsrc_la-color.lo libgettextsrc_la-write-catalog.lo libgettextsrc_la-write-properties.lo libgettextsrc_la-write-stringtable.lo libgettextsrc_la-write-po.lo libgettextsrc_la-msgl-ascii.lo libgettextsrc_la-msgl-iconv.lo libgettextsrc_la-msgl-equal.lo libgettextsrc_la-msgl-cat.lo libgettextsrc_la-msgl-header.lo libgettextsrc_la-msgl-english.lo libgettextsrc_la-msgl-check.lo libgettextsrc_la-file-list.lo libgettextsrc_la-msgl-charset.lo libgettextsrc_la-po-time.lo libgettextsrc_la-plural-exp.lo libgettextsrc_la-plural-eval.lo libgettextsrc_la-plural-table.lo libgettextsrc_la-format.lo libgettextsrc_la-format-c.lo libgettextsrc_la-format-sh.lo libgettextsrc_la-format-python.lo libgettextsrc_la-format-python-brace.lo libgettextsrc_la-format-lisp.lo libgettextsr
c_la-format-elisp.lo libgettextsrc_la-format-librep.lo
libgettextsrc_la-format-scheme.lo libgettextsrc_la-format-java.lo libgettextsrc_la-format-csharp.lo libgettextsrc_la-format-awk.lo libgettextsrc_la-format-pascal.lo libgettextsrc_la-format-ycp.lo libgettextsrc_la-format-tcl.lo libgettextsrc_la-format-perl.lo libgettextsrc_la-format-perl-brace.lo libgettextsrc_la-format-php.lo libgettextsrc_la-format-gcc-internal.lo libgettextsrc_la-format-gfc-internal.lo libgettextsrc_la-format-qt.lo libgettextsrc_la-format-qt-plural.lo libgettextsrc_la-format-kde.lo libgettextsrc_la-format-boost.lo libgettextsrc_la-format-lua.lo libgettextsrc_la-format-javascript.lo libgettextsrc_la-read-desktop.lo
| x86_64-linux-libtool: error: 'libgettextsrc_la-message.lo' is not a
valid libtool object

| Makefile:2285: recipe for target 'libgettextsrc.la' failed
| make[5]: *** [libgettextsrc.la] Error 1
| make[5]: Leaving directory '/home/us/build-imx6ulevk-
mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/
build/gettext-tools/src'
| Makefile:2206: recipe for target 'all' failed
| make[4]: *** [all] Error 2
| make[4]: Leaving directory '/home/us/build-imx6ulevk-
mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/
build/gettext-tools/src'
| Makefile:1698: recipe for target 'all-recursive' failed
| make[3]: *** [all-recursive] Error 1
| make[3]: Leaving directory '/home/us/build-imx6ulevk-
mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/
build/gettext-tools'
| Makefile:1564: recipe for target 'all' failed
| make[2]: *** [all] Error 2
| make[2]: Leaving directory '/home/us/build-imx6ulevk-
mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/
build/gettext-tools'
| Makefile:380: recipe for target 'all-recursive' failed
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory '/home/us/build-imx6ulevk-
mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build'
| Makefile:336: recipe for target 'all' failed
| make: *** [all] Error 2
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (log file is located at

/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/ gettext-native/0.19.4-r0/temp/log.do_compile.5336)
ERROR: Task 531 (virtual:native:/home/us/build/os-poky/meta/recipes- core/gettext/gettext_0.19.4.bb, do_compile) failed with exit code '1'

I already tried to reinstall libtool but without success.

Some ideas whats the cause for this error?

Best regards,

Oliver
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#3 lore raw
In reply to a message not in the archive
Quoted 1 line

The benefit of the successful compiling of YOCTO Jethro on Kubuntu 16.04

over Ubuntu 14.04 would be the

Quoted 1 line

full understanding of the yocto system and its interaction with the host

system.

I do buy this argument just for the sole/only one use case: if you try to become YOCTO distro developer by yourself! ;-)

Zoran
_______

Quoted 140 lines · Jean-Pierre Sainfeld

The benefit of the successful compiling of YOCTO Jethro on Kubuntu 16.04 over Ubuntu 14.04 would be the
full understanding of the yocto system and its interaction with the host system.
Yocto is a fantastic tool albeit a large piece of knowledge to swallow :-)

JP Sainfeld

Quoted 107 lines · Zoran Stojsavljevic
Quoted 2 lines

I try to compile yocto jethro environment which is working on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .

What would be the benefit for the successful compiling of YOCTO Jethro on Kubuntu 16.04 over Ubuntu 14.04???

Zoran
_______

Quoted 95 lines · Oliver Graute

Hello list,

I try to compile yocto jethro environment which is working on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04.

The compilations stops on gettext-native.

bitbake -k fsl-image-mfgtool-initramfs

make[5]: Entering directory '/home/us/build-imx6ulevk-mfgt
ool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/get text-tools/src'
| ../x86_64-linux-libtool --tag=CC --mode=link gcc
-isystem/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/include

(quoted diff) +0 -2
-O2 -pipe -release 0.19.4 ../gnulib-lib/libgettextlib.la  -lc
-no-undefined  -L/home/us/build-imx6ulevk-mfg

tool/tmp/sysroots/x86_64-linux/usr/lib -L/home/us/build-imx6ulevk-mfg tool/tmp/sysroots/x86_64-linux/lib -Wl,-rpath-link,/home/us/build

(quoted diff) +0 -5
-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib
-Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib
-Wl,-O1 -o libgettextsrc.la -rpath /home/us/build-imx6ulevk-mfgto

ol/tmp/sysroots/x86_64-linux/usr/lib libgettextsrc_la-message.lo libgettextsrc_la-po-error.lo libgettextsrc_la-po-xerror.lo libgettextsrc_la-read-catalog-abstract.lo libgettextsrc_la-po-lex.lo libgettextsrc_la-po-gram-gen.lo libgettextsrc_la-po-charset.lo libgettex
tsrc_la-read-po.lo libgettextsrc_la-read-properties.lo
libgettextsrc_la-read-stringtable.lo libgettextsrc_la-open-catalog.lo libgettextsrc_la-dir-list.lo libgettextsrc_la-str-list.lo libgettextsrc_la-read-catalog.lo libgettextsrc_la-color.lo libgettextsrc_la-write-catalog.lo libgettextsrc_la-write-properties.lo libgettextsrc_la-write-stringtable.lo libgettextsrc_la-write-po.lo libgettextsrc_la-msgl-ascii.lo libgettextsrc_la-msgl-iconv.lo libgettextsrc_la-msgl-equal.lo libgettextsrc_la-msgl-cat.lo libgettextsrc_la-msgl-header.lo libgettextsrc_la-msgl-english.lo libgettextsrc_la-msgl-check.lo libgettextsrc_la-file-list.lo libgettextsrc_la-msgl-charset.lo libgettextsrc_la-po-time.lo libgettextsrc_la-plural-exp.lo libgettextsrc_la-plural-eval.lo libgettextsrc_la-plural-table.lo libgettextsrc_la-format.lo libgettextsrc_la-format-c.lo libgettextsrc_la-format-sh.lo libgettextsrc_la-format-python.lo libgettextsrc_la-format-python-brace.lo libgettextsrc_la-format-lisp.lo libgettextsr
c_la-format-elisp.lo libgettextsrc_la-format-librep.lo
libgettextsrc_la-format-scheme.lo libgettextsrc_la-format-java.lo libgettextsrc_la-format-csharp.lo libgettextsrc_la-format-awk.lo libgettextsrc_la-format-pascal.lo libgettextsrc_la-format-ycp.lo libgettextsrc_la-format-tcl.lo libgettextsrc_la-format-perl.lo libgettextsrc_la-format-perl-brace.lo libgettextsrc_la-format-php.lo libgettextsrc_la-format-gcc-internal.lo libgettextsrc_la-format-gfc-internal.lo libgettextsrc_la-format-qt.lo libgettextsrc_la-format-qt-plural.lo libgettextsrc_la-format-kde.lo libgettextsrc_la-format-boost.lo libgettextsrc_la-format-lua.lo libgettextsrc_la-format-javascript.lo libgettextsrc_la-read-desktop.lo
| x86_64-linux-libtool: error: 'libgettextsrc_la-message.lo' is not a
valid libtool object

| Makefile:2285: recipe for target 'libgettextsrc.la' failed
| make[5]: *** [libgettextsrc.la] Error 1
| make[5]: Leaving directory '/home/us/build-imx6ulevk-mfgt
ool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/get
text-tools/src'
| Makefile:2206: recipe for target 'all' failed
| make[4]: *** [all] Error 2
| make[4]: Leaving directory '/home/us/build-imx6ulevk-mfgt
ool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/get
text-tools/src'
| Makefile:1698: recipe for target 'all-recursive' failed
| make[3]: *** [all-recursive] Error 1
| make[3]: Leaving directory '/home/us/build-imx6ulevk-mfgt
ool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools'
| Makefile:1564: recipe for target 'all' failed
| make[2]: *** [all] Error 2
| make[2]: Leaving directory '/home/us/build-imx6ulevk-mfgt
ool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools'
| Makefile:380: recipe for target 'all-recursive' failed
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory '/home/us/build-imx6ulevk-mfgt
ool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build'
| Makefile:336: recipe for target 'all' failed
| make: *** [all] Error 2
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (log file is located at

/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gette xt-native/0.19.4-r0/temp/log.do_compile.5336)
ERROR: Task 531 (virtual:native:/home/us/build /os-poky/meta/recipes-core/gettext/gettext_0.19.4.bb, do_compile) failed with exit code '1'

I already tried to reinstall libtool but without success.

Some ideas whats the cause for this error?

Best regards,

Quoted 16 lines
Quoted 7 lines

Oliver
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

--
Jean-Pierre Sainfeld
408-508-1741

#4 lore raw
In reply to Zoran Stojsavljevic
Quoted 5 lines · Zoran Stojsavljevic
Quoted 2 lines

I try to compile yocto jethro environment which is working on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .

What would be the benefit for the successful compiling of YOCTO Jethro on Kubuntu 16.04 over Ubuntu 14.04???

I tried to get my Yocto compiled on a PC of a colleague and his installation was a Kubuntu 16.04. I've made the experience that often only additional packages needs to be installed to step over these compile issues. Sometimes its clear from the debug output but in this case I have no Idea which packages is missing. On my develop PC and our Buildserver with Ubuntu 14.04 everything is fine. But I'am afraid that I can get similar trouble if I update to a newer ubuntu release there too.

Best regards,

Oliver

#5 lore raw

Jethro doesn't support Yocto 16.* because it is very old (released 2015, it's been unmaintained for six months now). If you want to use Jethro despite the known serious security problems then you'll need to dig out the relevant fixes from the newer releases.

Ross

Quoted 23 lines · Oliver Graute
Quoted 5 lines · Zoran Stojsavljevic
Quoted 2 lines

I try to compile yocto jethro environment which is working on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .

What would be the benefit for the successful compiling of YOCTO Jethro on Kubuntu 16.04 over Ubuntu 14.04???

I tried to get my Yocto compiled on a PC of a colleague and his installation was a Kubuntu 16.04. I've made the experience that often only additional packages needs to be installed to step over these compile issues. Sometimes its clear from the debug output but in this case I have no Idea which packages is missing. On my develop PC and our Buildserver with Ubuntu 14.04 everything is fine. But I'am afraid that I can get similar trouble if I update to a newer ubuntu release there too.

Best regards,

Oliver
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#6 lore raw
Quoted 1 line · Ross

Jethro doesn't support Yocto 16.* because it is very old (released

Err, Jethro doesn't support _Ubuntu_ 16.*
(Yocto 16.* is a ways off! :) )

Quoted 3 lines

2015, it's been unmaintained for six months now). If you want to use Jethro despite the known serious security problems then you'll need to dig out the relevant fixes from the newer releases.

Can you use a later release of Yocto such as 2.4 or 2.5 aka rocko/sumo?

If you need to use an older release there are companies, such as Wind River [1], that can provide commercial support for 5+ years after the Yocto release date. Send me an email off-list and I'll help you contact our sales people! :)

../Randy

[1] https://www.yoctoproject.org/ecosystem/yocto-project-compatible-product-showcase/

This list is a bit out of date, we release WR Linux 10: LTS last fall. It's based on YP-2.4/rocko

Quoted 27 lines

Ross

Quoted 23 lines · Oliver Graute
Quoted 5 lines · Zoran Stojsavljevic
Quoted 2 lines

I try to compile yocto jethro environment which is working on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .

What would be the benefit for the successful compiling of YOCTO Jethro on Kubuntu 16.04 over Ubuntu 14.04???

I tried to get my Yocto compiled on a PC of a colleague and his installation was a Kubuntu 16.04. I've made the experience that often only additional packages needs to be installed to step over these compile issues. Sometimes its clear from the debug output but in this case I have no Idea which packages is missing. On my develop PC and our Buildserver with Ubuntu 14.04 everything is fine. But I'am afraid that I can get similar trouble if I update to a newer ubuntu release there too.

Best regards,

Oliver
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Signature · 2 lines
# Randy MacLeod
# Wind River Linux
#7 lore raw
In reply to Burton, Ross
Quoted 1 line

Jethro doesn't support Yocto 16.* because it is very old (released 2015...)...

Now, I must admit, I have learned something new. Never gave any consideration to these releases: example: Pyro 17.0.3.

But now I understand: it has direct link with Ubuntu 17... Even, YOCTO Pyro, as given example, can be substituted with Ubuntu 17.04?! Wow...

Every day in every way, I'm progressing more and more! ;-)

Quoted 2 lines

If you want to use Jethro despite the known serious security problems then you'll need to dig out the relevant fixes from the newer releases.

My question here is: how hard it is? Either to move/rebase complex application and some system packages to Rocko (and rebase/revisit APIs), either to back-port additional (security) packages from the newer releases?!

Seems lot of hard work, considering both cases.

Zoran

Quoted 31 lines · Ross

Jethro doesn't support Yocto 16.* because it is very old (released 2015, it's been unmaintained for six months now). If you want to use Jethro despite the known serious security problems then you'll need to dig out the relevant fixes from the newer releases.

Ross

Quoted 23 lines · Oliver Graute
Quoted 5 lines · Zoran Stojsavljevic
Quoted 2 lines

I try to compile yocto jethro environment which is working on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .

What would be the benefit for the successful compiling of YOCTO Jethro on Kubuntu 16.04 over Ubuntu 14.04???

I tried to get my Yocto compiled on a PC of a colleague and his installation was a Kubuntu 16.04. I've made the experience that often only additional packages needs to be installed to step over these compile issues. Sometimes its clear from the debug output but in this case I have no Idea which packages is missing. On my develop PC and our Buildserver with Ubuntu 14.04 everything is fine. But I'am afraid that I can get similar trouble if I update to a newer ubuntu release there too.

Best regards,

Oliver
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#8 lore raw

Oliver,

Sorry for stealing your show... Did not want to. :-(

Floor all yours.

Zoran
_______

Quoted 54 lines · Zoran Stojsavljevic
Quoted 1 line

Jethro doesn't support Yocto 16.* because it is very old (released 2015...)...

Now, I must admit, I have learned something new. Never gave any consideration to these releases: example: Pyro 17.0.3.

But now I understand: it has direct link with Ubuntu 17... Even, YOCTO Pyro, as given example, can be substituted with Ubuntu 17.04?! Wow...

Every day in every way, I'm progressing more and more! ;-)

Quoted 2 lines

If you want to use Jethro despite the known serious security problems then you'll need to dig out the relevant fixes from the newer releases.

My question here is: how hard it is? Either to move/rebase complex application and some system packages to Rocko (and rebase/revisit APIs), either to back-port additional (security) packages from the newer releases?!

Seems lot of hard work, considering both cases.

Zoran

Quoted 31 lines · Ross

Jethro doesn't support Yocto 16.* because it is very old (released 2015, it's been unmaintained for six months now). If you want to use Jethro despite the known serious security problems then you'll need to dig out the relevant fixes from the newer releases.

Ross

Quoted 23 lines · Oliver Graute
Quoted 5 lines · Zoran Stojsavljevic
Quoted 2 lines

I try to compile yocto jethro environment which is working on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .

What would be the benefit for the successful compiling of YOCTO Jethro on Kubuntu 16.04 over Ubuntu 14.04???

I tried to get my Yocto compiled on a PC of a colleague and his installation was a Kubuntu 16.04. I've made the experience that often only additional packages needs to be installed to step over these compile issues. Sometimes its clear from the debug output but in this case I have no Idea which packages is missing. On my develop PC and our Buildserver with Ubuntu 14.04 everything is fine. But I'am afraid that I can get similar trouble if I update to a newer ubuntu release there too.

Best regards,

Oliver
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#11 lore raw
In reply to Oliver Graute
Quoted 7 lines · Oliver Graute

Hello list,

I try to compile yocto jethro environment which is working on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04.

The compilations stops on gettext-native.

Quoted 7 lines

bitbake -k fsl-image-mfgtool-initramfs

make[5]: Entering directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools/src'
| ../x86_64-linux-libtool --tag=CC --mode=link gcc -isystem/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/include -O2 -pipe -release 0.19.4 ../gnulib-lib/libgettextlib.la -lc -no-undefined -L/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib -L/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib -Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib -Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib -Wl,-O1 -o libgettextsrc.la -rpath /home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib libgettextsrc_la-message.lo libgettextsrc_la-po-error.lo libgettextsrc_la-po-xerror.lo libgettextsrc_la-read-catalog-abstract.lo libgettextsrc_la-po-lex.lo libgettextsrc_la-po-gram-gen.lo libgettextsrc_la-po-charset.lo libgettex
tsrc_la-read-po.lo libgettextsrc_la-read-properties.lo libgettextsrc_la-read-stringtable.lo libgettextsrc_la-open-catalog.lo libgettextsrc_la-dir-list.lo libgettextsrc_la-str-list.lo libgettextsrc_la-read-catalog.lo libgettextsrc_la-color.lo libgettextsrc_la-write-catalog.lo libgettextsrc_la-write-properties.lo libgettextsrc_la-write-stringtable.lo libgettextsrc_la-write-po.lo libgettextsrc_la-msgl-ascii.lo libgettextsrc_la-msgl-iconv.lo libgettextsrc_la-msgl-equal.lo libgettextsrc_la-msgl-cat.lo libgettextsrc_la-msgl-header.lo libgettextsrc_la-msgl-english.lo libgettextsrc_la-msgl-check.lo libgettextsrc_la-file-list.lo libgettextsrc_la-msgl-charset.lo libgettextsrc_la-po-time.lo libgettextsrc_la-plural-exp.lo libgettextsrc_la-plural-eval.lo libgettextsrc_la-plural-table.lo libgettextsrc_la-format.lo libgettextsrc_la-format-c.lo libgettextsrc_la-format-sh.lo libgettextsrc_la-format-python.lo libgettextsrc_la-format-python-brace.lo libgettextsrc_la-format-lisp.lo libgettextsr c_la-format-elisp.lo libgettextsrc_la-format-librep.lo libgettextsrc_la-format-scheme.lo libgettextsrc_la-format-java.lo libgettextsrc_la-format-csharp.lo libgettextsrc_la-format-awk.lo libgettextsrc_la-format-pascal.lo libgettextsrc_la-format-ycp.lo libgettextsrc_la-format-tcl.lo libgettextsrc_la-format-perl.lo libgettextsrc_la-format-perl-brace.lo libgettextsrc_la-format-php.lo libgettextsrc_la-format-gcc-internal.lo libgettextsrc_la-format-gfc-internal.lo libgettextsrc_la-format-qt.lo libgettextsrc_la-format-qt-plural.lo libgettextsrc_la-format-kde.lo libgettextsrc_la-format-boost.lo libgettextsrc_la-format-lua.lo libgettextsrc_la-format-javascript.lo libgettextsrc_la-read-desktop.lo
| x86_64-linux-libtool: error: 'libgettextsrc_la-message.lo' is not a valid libtool object

libgettextsrc_la-message.lo should be a short text file. Could you find it in your build tree and post a copy?

Quoted 19 lines
| Makefile:2285: recipe for target 'libgettextsrc.la' failed
| make[5]: *** [libgettextsrc.la] Error 1
| make[5]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools/src'
| Makefile:2206: recipe for target 'all' failed
| make[4]: *** [all] Error 2
| make[4]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools/src'
| Makefile:1698: recipe for target 'all-recursive' failed
| make[3]: *** [all-recursive] Error 1
| make[3]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools'
| Makefile:1564: recipe for target 'all' failed
| make[2]: *** [all] Error 2
| make[2]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools'
| Makefile:380: recipe for target 'all-recursive' failed
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build'
| Makefile:336: recipe for target 'all' failed
| make: *** [all] Error 2
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (log file is located at /home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/temp/log.do_compile.5336)
Quoted 6 lines

ERROR: Task 531 (virtual:native:/home/us/build/os-poky/meta/recipes-core/gettext/gettext_0.19.4.bb, do_compile) failed with exit code '1'

I already tried to reinstall libtool but without success.

Some ideas whats the cause for this error?

At a guess, something a little unusual with the setup of your Kubuntu system. Combining Ubuntu 16.04 with OE 2.0 isn't so out of the ordinary and others would certainly have hit the problem before now if it was always seen.

Did you install all the standard host dependencies?

https://www.yoctoproject.org/docs/2.0/yocto-project-qs/yocto-project-qs.html#packages

Did you manually upgrade or downgrade any of these host tools? Or is the Kubuntu system a fairly clean generic installation?

#12 lore raw
Quoted 6 lines · Andre McCurdy
Quoted 5 lines · Oliver Graute

Hello list,

I try to compile yocto jethro environment which is working on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04.

Quoted 9 lines
Quoted 5 lines

The compilations stops on gettext-native.

bitbake -k fsl-image-mfgtool-initramfs

| x86_64-linux-libtool: error: 'libgettextsrc_la-message.lo' is not a valid libtool object

libgettextsrc_la-message.lo should be a short text file. Could you find it in your build tree and post a copy?

the file was a zero byte file. All other *.lo files in that directory was zero byte too. I assume because of a system crash I had before.

Just a bitbake -c cleansstate and rebuild of gettext-native didn't fixed that.

I deleted all the build-imx6ulevk folder and build everything from scratch with only one thread, waited a few hours for compilation and now its working ;)

Quoted 11 lines
Quoted 1 line

Some ideas whats the cause for this error?

At a guess, something a little unusual with the setup of your Kubuntu system. Combining Ubuntu 16.04 with OE 2.0 isn't so out of the ordinary and others would certainly have hit the problem before now if it was always seen.

Did you install all the standard host dependencies?

https://www.yoctoproject.org/docs/2.0/yocto-project-qs/yocto-project-qs.html#packages

yes but thanks for the link as reference.

Best regards,

Oliver

#13 lore raw
Quoted 3 lines

I deleted all the build-imx6ulevk folder and build everything from scratch with only one thread, waited a few hours for compilation and now its working ;)

Still, I am struggling to understand why??? What is the requirement behind this ask?

As we see, it is much longer (one thread only) than on 14.04!?

Could you, please, do it on Ubuntu 17.04, or 17.10 (i bet, you can't)??? And why, after all???

Zoran
_______

Quoted 48 lines · Oliver Graute
Quoted 6 lines · Andre McCurdy
Quoted 5 lines · Oliver Graute

Hello list,

I try to compile yocto jethro environment which is working on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04.

Quoted 9 lines
Quoted 5 lines

The compilations stops on gettext-native.

bitbake -k fsl-image-mfgtool-initramfs

| x86_64-linux-libtool: error: 'libgettextsrc_la-message.lo' is not a valid libtool object

libgettextsrc_la-message.lo should be a short text file. Could you find it in your build tree and post a copy?

the file was a zero byte file. All other *.lo files in that directory was zero byte too. I assume because of a system crash I had before.

Just a bitbake -c cleansstate and rebuild of gettext-native didn't fixed that.

I deleted all the build-imx6ulevk folder and build everything from scratch with only one thread, waited a few hours for compilation and now its working ;)

Quoted 11 lines
Quoted 1 line

Some ideas whats the cause for this error?

At a guess, something a little unusual with the setup of your Kubuntu system. Combining Ubuntu 16.04 with OE 2.0 isn't so out of the ordinary and others would certainly have hit the problem before now if it was always seen.

Did you install all the standard host dependencies?

https://www.yoctoproject.org/docs/2.0/yocto-project-qs/yocto-project-qs.html#packages

yes but thanks for the link as reference.

Best regards,

Oliver
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#14 lore raw
Quoted 6 lines · Zoran Stojsavljevic
Quoted 3 lines

I deleted all the build-imx6ulevk folder and build everything from scratch with only one thread, waited a few hours for compilation and now its working ;)

Still, I am struggling to understand why??? What is the requirement behind this ask?

The requirement was just get our older yocto (jethro) build running on a PC of a different developer. Often developers have their own flavor of Ubuntu releases and they update to newer versions while they still develop on yocto releases which is much older. Because that yocto release is currently in the field by our costumer. Our product cycle is not so fast to use the newest yocto releases. We started to develop when jethro was up to date.

We compiled single threaded just because his PC is a bit unstable on high load. And it crashed a few times on parallel makes. I know that this is not ideal for yocto development.

Quoted 2 lines

As we see, it is much longer (one thread only) than on 14.04!?

its takes much longer then with settings

PARALLEL_MAKE = "-j 4"
BB_NUMBER_THREADS = "4"

Quoted 2 lines

Could you, please, do it on Ubuntu 17.04, or 17.10 (i bet, you can't)??? And why, after all???

currently not im using only Ubuntu LTS Releases. Perhaps I will try 18.04 LTS which released yesterday ;)

Best regards,

Oliver

#15 lore raw
Quoted 1 line

Perhaps I will try 18.04 LTS which released yesterday ;)

This will be very interesting test. I bet it'll not work 100% (any of use cases, with any number of threads). Native packages moved far beyond Y2015, far beyond YOCTO Jethro release.

Zoran
_______

Quoted 42 lines · Oliver Graute
Quoted 6 lines · Zoran Stojsavljevic
Quoted 3 lines

I deleted all the build-imx6ulevk folder and build everything from scratch with only one thread, waited a few hours for compilation and now its working ;)

Still, I am struggling to understand why??? What is the requirement behind this ask?

The requirement was just get our older yocto (jethro) build running on a PC of a different developer. Often developers have their own flavor of Ubuntu releases and they update to newer versions while they still develop on yocto releases which is much older. Because that yocto release is currently in the field by our costumer. Our product cycle is not so fast to use the newest yocto releases. We started to develop when jethro was up to date.

We compiled single threaded just because his PC is a bit unstable on high load. And it crashed a few times on parallel makes. I know that this is not ideal for yocto development.

Quoted 2 lines

As we see, it is much longer (one thread only) than on 14.04!?

its takes much longer then with settings

PARALLEL_MAKE = "-j 4"
BB_NUMBER_THREADS = "4"

Quoted 2 lines

Could you, please, do it on Ubuntu 17.04, or 17.10 (i bet, you can't)??? And why, after all???

currently not im using only Ubuntu LTS Releases. Perhaps I will try 18.04 LTS which released yesterday ;)

Best regards,

Oliver
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#16 lore raw
In reply to Oliver Graute
Quoted 16 lines · Oliver Graute
Quoted 6 lines · Zoran Stojsavljevic
Quoted 3 lines

I deleted all the build-imx6ulevk folder and build everything from scratch with only one thread, waited a few hours for compilation and now its working ;)

Still, I am struggling to understand why??? What is the requirement behind this ask?

The requirement was just get our older yocto (jethro) build running on a PC of a different developer. Often developers have their own flavor of Ubuntu releases and they update to newer versions while they still develop on yocto releases which is much older. Because that yocto release is currently in the field by our costumer. Our product cycle is not so fast to use the newest yocto releases. We started to develop when jethro was up to date.

Quoted 3 lines

We compiled single threaded just because his PC is a bit unstable on high load. And it crashed a few times on parallel makes. I know that this is not ideal for yocto development.

Take a look at BIOS settings. I had a board that was overclocking based on CPU temperature, which failed miserably when you actually used all the cores. Disable such settings.

Philip

Quoted 19 lines
Quoted 3 lines

As we see, it is much longer (one thread only) than on 14.04!?

its takes much longer then with settings

PARALLEL_MAKE = "-j 4"
BB_NUMBER_THREADS = "4"

Quoted 2 lines

Could you, please, do it on Ubuntu 17.04, or 17.10 (i bet, you can't)??? And why, after all???

currently not im using only Ubuntu LTS Releases. Perhaps I will try 18.04 LTS which released yesterday ;)

Best regards,

Oliver

#17 lore raw
Quoted 3 lines

Take a look at BIOS settings. I had a board that was overclocking based on CPU temperature, which failed miserably when you actually used all the cores. Disable such settings.

This has nothing to do with this particular problem. You simply, since you over-clocked CPU, reached very quickly TDP1 (using all cores), then reached beyond so-called TDP2 (since you did not setup CMOS correctly), which initiated/triggered HW control called /PROCHOT... In order to save CPU from physical damage, since you have reached very close to Junction T.

Even if you did setup thresholds correctly, CPU probably went to hold/blocked state for some limited time to throttle, in order to cool down... Then these YOCTO failing effects might be visible, but I have no idea how (most likely some overheated cores got thread of execution/HyperThreads pipeline stale/lost)!?

My best guess, IMHO!

Zoran
_______

Quoted 52 lines · Philip Balister
Quoted 16 lines · Oliver Graute
Quoted 6 lines · Zoran Stojsavljevic
Quoted 3 lines

I deleted all the build-imx6ulevk folder and build everything from scratch with only one thread, waited a few hours for compilation and now its working ;)

Still, I am struggling to understand why??? What is the requirement behind this ask?

The requirement was just get our older yocto (jethro) build running on a PC of a different developer. Often developers have their own flavor of Ubuntu releases and they update to newer versions while they still develop on yocto releases which is much older. Because that yocto release is currently in the field by our costumer. Our product cycle is not so fast to use the newest yocto releases. We started to develop when jethro was up to date.

Quoted 3 lines

We compiled single threaded just because his PC is a bit unstable on high load. And it crashed a few times on parallel makes. I know that this is not ideal for yocto development.

Take a look at BIOS settings. I had a board that was overclocking based on CPU temperature, which failed miserably when you actually used all the cores. Disable such settings.

Philip

Quoted 12 lines
Quoted 3 lines

As we see, it is much longer (one thread only) than on 14.04!?

its takes much longer then with settings

PARALLEL_MAKE = "-j 4"
BB_NUMBER_THREADS = "4"

Quoted 2 lines

Could you, please, do it on Ubuntu 17.04, or 17.10 (i bet, you can't)??? And why, after all???

Quoted 7 lines

currently not im using only Ubuntu LTS Releases. Perhaps I will try 18.04 LTS which released yesterday ;)

Best regards,

Oliver

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#9 lore raw
In reply to Zoran Stojsavljevic
Quoted 10 lines · Zoran Stojsavljevic
Quoted 1 line

Jethro doesn't support Yocto 16.* because it is very old (released 2015...)...

Now, I must admit, I have learned something new. Never gave any consideration to these releases: example: Pyro 17.0.3.

But now I understand: it has direct link with Ubuntu 17... Even, YOCTO Pyro, as given example, can be substituted with Ubuntu 17.04?! Wow...

Every day in every way, I'm progressing more and more! ;-)

You seem to be a bit confused here by the fact that the poky version number lined up with the year in 2017. See https://wiki.yoctoproject.org/wiki/Releases for some context.

Signature · 2 lines
Paul Barker
Beta Five Ltd
#10 lore raw

Hello Paul,

Could you, please, read couple of times more my quoted comment (by you)? Stress to word: *couple*! ;-)

Quoted 5 lines

Now, I must admit, I have learned something new. Never gave any consideration to these releases: example: Pyro 17.0.3.

* But now I understand: it has direct link with Ubuntu 17... Even, YOCTO* *Pyro, as given example, can be substituted with Ubuntu 17.04?! Wow... *

Thank you,
Zoran
_______

Quoted 21 lines · Paul Barker
Quoted 1 line · Zoran Stojsavljevic
Quoted 1 line

Jethro doesn't support Yocto 16.* because it is very old (released

2015...)...

Quoted 9 lines

Now, I must admit, I have learned something new. Never gave any consideration to these releases: example: Pyro 17.0.3.

But now I understand: it has direct link with Ubuntu 17... Even, YOCTO Pyro, as given example, can be substituted with Ubuntu 17.04?! Wow...

Every day in every way, I'm progressing more and more! ;-)

You seem to be a bit confused here by the fact that the poky version number lined up with the year in 2017. See https://wiki.yoctoproject.org/
wiki/Releases for some context.

--
Paul Barker
Beta Five Ltd