Skip to contentSkip to conversation

mainline u-boot on radxarock (rockchip rk3188) from SDcard

U-Boot Trevor Woerner 4 participants 7 messages Apr 29, 2018 – Sep 21, 2018

lore
Share & tools
lore
#0 lore raw

Hello,

I am able to generate a bootable image (bootloader, parameter, kernel, filesystem) for my radxarock (pro) on an SDcard if I use the bootloader from
https://github.com/radxa/u-boot-rockchip. When I try to use mainline u-boot_2008.01 it doesn't seem to be able to find or boot from the SDcard:

U-Boot SPL 2018.01-dirty (Apr 29 2018 - 05:19:18) Returning to boot ROM...

U-Boot 2018.01-dirty (Apr 29 2018 - 05:19:18 +0000)

Model: Radxa Rock
DRAM: 2 GiB
MMC:
MMC Device 0 not found
*** Warning - No MMC card found, using default environment

In: serial at 20064000
Out: serial at 20064000
Err: serial at 20064000
Model: Radxa Rock
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
No MMC device available
No MMC device available
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-rockchip No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
No ethernet found.
No ethernet found.
=>

Any thoughts?

Best regards,
Trevor

#1 lore raw
Quoted 4 lines · Trevor Woerner

I am able to generate a bootable image (bootloader, parameter, kernel, filesystem) for my radxarock (pro) on an SDcard if I use the bootloader from
https://github.com/radxa/u-boot-rockchip. When I try to use mainline u-boot_2008.01

I was looking though the mailing list and was happy to see lots of recent activity with rk3188! Maybe there's a chance I'll get this working :-)

As such, I moved from 2018.01 to the most latest (i.e. 8c84287a0f225e29b688bda848e49a555c68a442)

Unfortunately I'm not seeing much of a change:

U-Boot SPL 2018.05-rc2-00145-g8c84287a0f-dirty (Apr 29 2018 - 23:06:29 +0000) Returning to boot ROM...

U-Boot 2018.05-rc2-00145-g8c84287a0f-dirty (Apr 29 2018 - 23:06:29 +0000)

Model: Radxa Rock
DRAM: 2 GiB
MMC:
Loading Environment from MMC... MMC Device 0 not found *** Warning - No MMC card found, using default environment

Failed (-5)
In: serial at 20064000
Out: serial at 20064000
Err: serial at 20064000
Model: Radxa Rock
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
No MMC device available
No MMC device available
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-rockchip No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
No ethernet found.
No ethernet found.
=>

Anything else I can try testing?

Best regards,
Trevor

#2 lore raw
In reply to Trevor Woerner

Hi Trevor,

    It looks like the mmc driver does not work correctly, and no emmc/sdcard found.

Maybe you can enable 'DEBUG' and get more detail about what happen.

Thanks,
- Kever

Quoted 77 lines · Trevor Woerner

Hello,

I am able to generate a bootable image (bootloader, parameter, kernel, filesystem) for my radxarock (pro) on an SDcard if I use the bootloader from
https://github.com/radxa/u-boot-rockchip. When I try to use mainline u-boot_2008.01 it doesn't seem to be able to find or boot from the SDcard:

U-Boot SPL 2018.01-dirty (Apr 29 2018 - 05:19:18) Returning to boot ROM...

U-Boot 2018.01-dirty (Apr 29 2018 - 05:19:18 +0000)

Model: Radxa Rock
DRAM: 2 GiB
MMC:
MMC Device 0 not found
*** Warning - No MMC card found, using default environment

In: serial at 20064000
Out: serial at 20064000
Err: serial at 20064000
Model: Radxa Rock
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
No MMC device available
No MMC device available
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-rockchip No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
No ethernet found.
No ethernet found.
=>

Any thoughts?

Best regards,
Trevor
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot

#3 lore raw

Hi,

Quoted 5 lines · Kever Yang

Hi Trevor,

    It looks like the mmc driver does not work correctly, and no emmc/sdcard found.

Quoted 12 lines

Maybe you can enable 'DEBUG' and get more detail about what happen.

Thanks,
- Kever

Quoted 6 lines · Trevor Woerner

Hello,

I am able to generate a bootable image (bootloader, parameter, kernel, filesystem) for my radxarock (pro) on an SDcard if I use the bootloader from
https://github.com/radxa/u-boot-rockchip. When I try to use mainline u-boot_2008.01 it doesn't seem to be able to find or boot from the SDcard:

Do you use the dwmmc driver? or which driver are you using? And Could you share which defconfig is used?

Plz, CC'd me.

Best Regards,
Jaehoon Chung

Quoted 78 lines
Quoted 63 lines

U-Boot SPL 2018.01-dirty (Apr 29 2018 - 05:19:18) Returning to boot ROM...

U-Boot 2018.01-dirty (Apr 29 2018 - 05:19:18 +0000)

Model: Radxa Rock
DRAM: 2 GiB
MMC:
MMC Device 0 not found
*** Warning - No MMC card found, using default environment

In: serial at 20064000
Out: serial at 20064000
Err: serial at 20064000
Model: Radxa Rock
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
No MMC device available
No MMC device available
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-rockchip No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
No ethernet found.
No ethernet found.
=>

Quoted 8 lines

Any thoughts?

Best regards,
Trevor
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot

#4 lore raw

Hi Jaehoon and Kever,

Quoted 10 lines · Jaehoon Chung

Hi,

Quoted 6 lines · Kever Yang

Hi Trevor,

It looks like the mmc driver does not work correctly, and no
emmc/sdcard found.

Maybe you can enable 'DEBUG' and get more detail about what happen.

Is enabling DEBUG just a matter of increasing the logging levels (CONFIG_LOGLEVEL and CONFIG_LOG_MAX_LEVEL) to 7, or is something else required?

Quoted 10 lines
Quoted 9 lines

Thanks,
- Kever

Quoted 4 lines · Trevor Woerner

Hello,

I am able to generate a bootable image (bootloader, parameter, kernel, filesystem) for my radxarock (pro) on an SDcard if I use the bootloader

from

Quoted 10 lines
Quoted 2 lines
Quoted 2 lines

https://github.com/radxa/u-boot-rockchip. When I try to use mainline u-boot_2008.01 it doesn't seem to be able to find or boot from the

SDcard:

Do you use the dwmmc driver? or which driver are you using? And Could you share which defconfig is used?

Plz, CC'd me.

I'm using rock_defconfig, currently without any changes, as such MMC_DW_ROCKCHIP is enabled.

#5 lore raw

Dear Trevor,

Quoted 13 lines · Trevor Woerner

Hi Jaehoon and Kever,

Quoted 8 lines · Jaehoon Chung

Hi,

Quoted 5 lines · Kever Yang

Hi Trevor,

It looks like the mmc driver does not work correctly, and no
emmc/sdcard found.

Quoted 6 lines
Quoted 2 lines
Quoted 1 line

Maybe you can enable 'DEBUG' and get more detail about what happen.

Is enabling DEBUG just a matter of increasing the logging levels (CONFIG_LOGLEVEL and CONFIG_LOG_MAX_LEVEL) to 7, or is something else required?

I think you can just add the CONFIG_MMC_TRACE in include/configs/<your haeder>.h Then we can see the command sequence. It's helpful to debug.

Quoted 16 lines
Quoted 16 lines
Quoted 11 lines

Thanks,
- Kever

Quoted 4 lines · Trevor Woerner

Hello,

I am able to generate a bootable image (bootloader, parameter, kernel, filesystem) for my radxarock (pro) on an SDcard if I use the bootloader

from

Quoted 2 lines
Quoted 2 lines

https://github.com/radxa/u-boot-rockchip. When I try to use mainline u-boot_2008.01 it doesn't seem to be able to find or boot from the

SDcard:

Quoted 8 lines
Quoted 6 lines

Do you use the dwmmc driver? or which driver are you using? And Could you share which defconfig is used?

Plz, CC'd me.

I'm using rock_defconfig, currently without any changes, as such MMC_DW_ROCKCHIP is enabled.

Did you try to check v2018.03? Your log seems that "didn't initialize any card." You didn't any change? Your bootloader added "-dirty"

U-Boot 2018.01-dirty (Apr 29 2018 - 05:19:18 +0000)

When i didn't work SD-card or eMMC, i follow the below sequence.

1. Check the correct gpio and power.
2. Check the device tree.
3. Check the clock.
4. And then check the device driver.
5. Check the mmc core.

Now. I need to get your information more.
dt file, board name, etc...

If you have a version that it's working fine, then you can try to find a trouble patch with git bisect command.

Best Regards,
Jaehoon Chung

Quoted 1 line
#6 lore raw
In reply to Kever Yang

Hi Trevor,

Am Mittwoch, 2. Mai 2018, 09:10:49 CEST schrieb Kever Yang:

Quoted 4 lines

Hi Trevor,

It looks like the mmc driver does not work correctly, and no
emmc/sdcard found.

I just sent off a series adding mmc support for rk3188 in u-boot, so maybe you could try that.

Heiko