Skip to contentSkip to conversation

media: i2c: lm3560: use conservative defaults

PATCH Superseded Pavel Machek 3 participants 4 messages May 6, 2018 – Aug 11, 2018

Subsystems (2)
Media (V4L/DVB) V4L2 lens drivers
lore
Share & tools
lore

Pavel Machek

author
#0 lore raw

PATCH 1/1 media: i2c: lm3560: use conservative defaults

If no pdata is found, we should use lowest current settings, not highest.

Signed-off-by Pavel Machek <[email protected]>
drivers/media/i2c/lm3560.c +6 -6
index b600e03a..c4e5ed5 100644
@@ -420,14 +434,14 @@ static int lm3560_probe(struct i2c_client *client,
 		pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
 		if (pdata == NULL)
 			return -ENODEV;
-		pdata->peak = LM3560_PEAK_3600mA;
-		pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX;
+		pdata->peak = LM3560_PEAK_1600mA;
+		pdata->max_flash_timeout = LM3560_FLASH_TOUT_MIN;
 		/* led 1 */
-		pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MAX;
-		pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MAX;
+		pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MIN;
+		pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MIN;
 		/* led 2 */
-		pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MAX;
-		pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MAX;
+		pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MIN;
+		pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MIN;
 	}
 	flash->pdata = pdata;
 	flash->dev = &client->dev;
Signature · 9 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180506/7eef940f/attachment.sig>
author
#1 lore raw

PATCH v2 1/1 media: i2c: lm3560: use conservative defaults

If no pdata is found, we should use lowest current settings, not highest.

Signed-off-by Pavel Machek <[email protected]>

---

v2: I got notification from patchwork that patch no longer applies, so I'm rediffing the patch.

drivers/media/i2c/lm3560.c +6 -6
index b600e03a..c4e5ed5 100644
@@ -420,14 +434,14 @@ static int lm3560_probe(struct i2c_client *client,
 		pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
 		if (pdata == NULL)
 			return -ENODEV;
-		pdata->peak = LM3560_PEAK_3600mA;
-		pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX;
+		pdata->peak = LM3560_PEAK_1600mA;
+		pdata->max_flash_timeout = LM3560_FLASH_TOUT_MIN;
 		/* led 1 */
-		pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MAX;
-		pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MAX;
+		pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MIN;
+		pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MIN;
 		/* led 2 */
-		pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MAX;
-		pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MAX;
+		pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MIN;
+		pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MIN;
 	}
 	flash->pdata = pdata;
 	flash->dev = &client->dev;
Signature · 9 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180716/85c917e2/attachment.sig>
#2 lore raw

Hi Pavel,

I think if there is not exist pdata, it should be set to the value of power on reset (POR) to sync with the chip.

According to the LM3560 datasheet, Flash Timeout is 512ms, Flash current is 875mA and Torch Current is 93.75mA.

Daniel Jeong.

Quoted 37 lines · Pavel Machek

If no pdata is found, we should use lowest current settings, not highest.

Signed-off-by Pavel Machek <[email protected]>

---

v2: I got notification from patchwork that patch no longer applies, so I'm rediffing the patch.

drivers/media/i2c/lm3560.c +6 -6
index b600e03a..c4e5ed5 100644
@@ -420,14 +434,14 @@ static int lm3560_probe(struct i2c_client *client,
  		pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
  		if (pdata == NULL)
  			return -ENODEV;
-		pdata->peak = LM3560_PEAK_3600mA;
-		pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX;
+		pdata->peak = LM3560_PEAK_1600mA;
+		pdata->max_flash_timeout = LM3560_FLASH_TOUT_MIN;
  		/* led 1 */
-		pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MAX;
-		pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MAX;
+		pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MIN;
+		pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MIN;
  		/* led 2 */
-		pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MAX;
-		pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MAX;
+		pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MIN;
+		pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MIN;
  	}
  	flash->pdata = pdata;
  	flash->dev = &client->dev;
#3 lore raw
Quoted 7 lines · Daniel Jeong

Hi Pavel,

I think if there is not exist pdata, it should be set to the value of power on reset (POR) to sync with the chip.

According to the LM3560 datasheet, Flash Timeout is 512ms, Flash current is 875mA and Torch Current is 93.75mA.

Can't we simple read back?

Signature · 2 lines
With Best Regards,
Andy Shevchenko