sched/deadline: Fix missing clock update
Juri Lelli
maintainerPATCH 1/1 sched/deadline: Fix missing clock update
A missing clock update is causing the below warning:
------------[ cut here ]------------ rq->clock_update_flags < RQCF_ACT_SKIP WARNING: CPU: 10 PID: 0 at kernel/sched/sched.h:963 inactive_task_timer+0x5d6/0x720 Modules linked in: xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack devlink ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables cmac bnep sunrpc arc4 iwlmvm intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp mac80211 kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore iwlwifi intel_rapl_perf snd_hda_codec_hdmi cfg80211 mei_wdt snd_hda_codec_realtek iTCO_wdt iTCO_vendor_support snd_hda_codec_generic snd_hda_intel btusb snd_hda_codec btrtl btbcm btintel wmi_bmof intel_wmi_thunderbolt snd_hwdep bluetooth snd_hda_core snd_seq snd_seq_device snd_pcm rtsx_usb_ms mei_me ecdh_generic snd_timer memstick rfkill snd mei lpc_ich i2c_i801 shpchp tpm_tis soundcore tpm_tis_core tpm xfs libcrc32c nouveau video drm_kms_helper e1000e ttm rtsx_usb_sdmmc drm mmc_core mxm_wmi igb crc32c_intel dca rtsx_usb ptp ata_generic r8169 i2c_algo_bit pps_core pata_acpi mii wmi CPU: 10 PID: 0 Comm: swapper/10 Not tainted 4.17.0-rc6+ #33 Hardware name: LENOVO 30B6S2F900/1030, BIOS S01KT56A 01/15/2018 RIP: 0010:inactive_task_timer+0x5d6/0x720 RSP: 0000:ffff91c89f203eb0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff91c891cc5810 RCX: 0000000000000000 RDX: ffff91c89b572a80 RSI: 0000000000000000 RDI: ffffffffa213319d RBP: ffff91c89f3e1f40 R08: 0000000000000001 R09: 0000000000000001 R10: ffff91c89f203df0 R11: 0000000000000000 R12: ffff91c09ec0e000 R13: ffff91c89f3e0800 R14: 00000000001e1f40 R15: ffffffffa27c2bb0 FS: 0000000000000000(0000) GS:ffff91c89f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f84659eb710 CR3: 0000000439212003 CR4: 00000000001606e0 Call Trace: <IRQ> ? task_woken_dl+0x70/0x70 __hrtimer_run_queues+0x10f/0x530 hrtimer_interrupt+0xe5/0x240 smp_apic_timer_interrupt+0x79/0x2b0 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:cpuidle_enter_state+0xa5/0x360 RSP: 0000:ffffa1f046387e98 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 RAX: ffff91c89b572a80 RBX: 00000080584fb70b RCX: 0000000000000000 RDX: ffff91c89b572a80 RSI: 0000000000000001 RDI: ffff91c89b572a80 RBP: 0000000000000002 R08: 00000000000015ec R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff91c89f3ebe40 R13: ffffffffa32dc4f8 R14: 0000000000000000 R15: 00000080584f5890 ? cpuidle_enter_state+0x9e/0x360 do_idle+0x203/0x280 cpu_startup_entry+0x6f/0x80 start_secondary+0x1b0/0x200 secondary_startup_64+0xa5/0xb0 Code: 31 c7 fa ff 0f 0b e9 e6 fd ff ff 80 3d 3c 61 24 01 00 0f 85 75 fd ff ff 48 c7 c7 b0 5b 0b a3 c6 05 28 61 24 01 01 e8 0a c7 fa ff <0f> 0b e9 5b fd ff ff 48 8b 7c 24 08 be ff ff ff ff e8 84 1b 01 irq event stamp: 793922 hardirqs last enabled at (793919): [<ffffffffa27c5f6e>] cpuidle_enter_state+0x9e/0x360 hardirqs last disabled at (793920): [<ffffffffa2a0096e>] interrupt_entry+0xce/0xe0 softirqs last enabled at (793922): [<ffffffffa20bef78>] irq_enter+0x68/0x70 softirqs last disabled at (793921): [<ffffffffa20bef5d>] irq_enter+0x4d/0x70 ---[ end trace eda7418c80ca042c ]---
This happens because inactive_task_timer calls sub_running_bw (if TASK_DEAD and non_contending) that might trigger a schedutil update, which might access the clock. Clock is however currently updated only later in inactive_task_timer function.
Fix the problem by updating the clock right after task_rq_lock().
---
This was actually first spotted by lkp-robot[1], but the fix never made it to the list as a proper patch. Apologies. :/
[1] https://www.spinics.net/lists/kernel/msg2706782.html
--- kernel/sched/deadline.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
kernel/sched/deadline.c +3 -3
@@ -1259,6 +1259,9 @@ static enum hrtimer_restart inactive_task_timer(struct hrtimer *timer) rq =task_rq_lock (p, &rf); +sched_clock_tick (); +update_rq_clock (rq); +if (!dl_task (p) || p->state ==TASK_DEAD ) {struct dl_bw *dl_b =dl_bw_of (task_cpu (p));
@@ -1278,9 +1281,6 @@ static enum hrtimer_restart inactive_task_timer(struct hrtimer *timer)if (dl_se->dl_non_contending ==0 ) goto unlock; -sched_clock_tick (); -update_rq_clock (rq); -sub_running_bw (dl_se, &rq->dl); dl_se->dl_non_contending =0 ; unlock:
Signature · 1 line
2.14.3
Peter Zijlstra
maintainerQuoted 1 line · Juri Lelli
A missing clock update is causing the below warning:
Thanks!
tip-bot for Juri Lelli
merge botsched/deadline: Fix missing clock update
Commit-ID: ecda2b66e263dfd6c1d6113add19150f4e235bb3 Gitweb: https://git.kernel.org/tip/ecda2b66e263dfd6c1d6113add19150f4e235bb3 Author: Juri Lelli <[email protected]> AuthorDate: Wed, 30 May 2018 18:08:09 +0200 Committer: Ingo Molnar <[email protected]> CommitDate: Thu, 31 May 2018 12:27:13 +0200
sched/deadline: Fix missing clock update
A missing clock update is causing the following warning:
rq->clock_update_flags < RQCF_ACT_SKIP
WARNING: CPU: 10 PID: 0 at kernel/sched/sched.h:963 inactive_task_timer+0x5d6/0x720 Call Trace: <IRQ> __hrtimer_run_queues+0x10f/0x530 hrtimer_interrupt+0xe5/0x240 smp_apic_timer_interrupt+0x79/0x2b0 apic_timer_interrupt+0xf/0x20 </IRQ> do_idle+0x203/0x280 cpu_startup_entry+0x6f/0x80 start_secondary+0x1b0/0x200 secondary_startup_64+0xa5/0xb0 hardirqs last enabled at (793919): [<ffffffffa27c5f6e>] cpuidle_enter_state+0x9e/0x360 hardirqs last disabled at (793920): [<ffffffffa2a0096e>] interrupt_entry+0xce/0xe0 softirqs last enabled at (793922): [<ffffffffa20bef78>] irq_enter+0x68/0x70 softirqs last disabled at (793921): [<ffffffffa20bef5d>] irq_enter+0x4d/0x70
This happens because inactive_task_timer() calls sub_running_bw() (if TASK_DEAD and non_contending) that might trigger a schedutil update, which might access the clock. Clock is however currently updated only later in inactive_task_timer() function.
Fix the problem by updating the clock right after task_rq_lock().
--- kernel/sched/deadline.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
kernel/sched/deadline.c +3 -3
@@ -1259,6 +1259,9 @@ static enum hrtimer_restart inactive_task_timer(struct hrtimer *timer) rq =task_rq_lock (p, &rf); +sched_clock_tick (); +update_rq_clock (rq); +if (!dl_task (p) || p->state ==TASK_DEAD ) {struct dl_bw *dl_b =dl_bw_of (task_cpu (p));
@@ -1278,9 +1281,6 @@ static enum hrtimer_restart inactive_task_timer(struct hrtimer *timer)if (dl_se->dl_non_contending ==0 ) goto unlock; -sched_clock_tick (); -update_rq_clock (rq); -sub_running_bw (dl_se, &rq->dl); dl_se->dl_non_contending =0 ; unlock: