Add a standard authorization framework
Subsystems (2)
PATCH v3 2/11 qom: don't require user creatable objects to be registered
In reply to Daniel P. BerrangéWhen an object is in turn owned by another user object, it is not desirable to expose this in the QOM object hierarchy, as it is just an internal implementation detail, we should be free to change without exposure.
--- qom/object.c | 12 ++++++++---- qom/object_interfaces.c | 16 ++++++++++------ 2 files changed, 18 insertions(+), 10 deletions(-)
qom/object.c +8 -4
@@ -546,15 +546,19 @@ Object *object_new_with_propv(const char *typename, goto error; } -object_property_add_child (parent, id, obj, &local_err); -if (local_err) { - goto error; +if (id !=NULL ) { +object_property_add_child (parent, id, obj, &local_err); +if (local_err) { + goto error; + } }if (object_dynamic_cast (obj,TYPE_USER_CREATABLE )) {user_creatable_complete (obj, &local_err);if (local_err) { -object_unparent (obj); +if (id !=NULL ) { +object_unparent (obj); + } goto error; } }
qom/object_interfaces.c +10 -6
@@ -83,16 +83,20 @@ Object *user_creatable_add_type(const char *type, const char *id, goto out; } -object_property_add_child (object_get_objects_root (), - id, obj, &local_err); -if (local_err) { - goto out; +if (id !=NULL ) { +object_property_add_child (object_get_objects_root (), + id, obj, &local_err); +if (local_err) { + goto out; + } }user_creatable_complete (obj, &local_err);if (local_err) { -object_property_del (object_get_objects_root (), - id, &error_abort); +if (id !=NULL ) { +object_property_del (object_get_objects_root (), + id, &error_abort); + } goto out; } out:
Signature · 1 line
2.17.0
v3 cover Add a standard authorization framework
An update to
v1: https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg02179.html
v2: https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg04469.html
The current network services now support encryption via TLS and in some cases support authentication via SASL. In cases where SASL is not available, x509 client certificates can be used as a crude authorization scheme, but using a sub-CA and controlling who you give certs to. In general this is not very flexible though, so this series introduces a new standard authorization framework.
It comes with four initial authorization mechanisms
- Simple - an exact username match. This is useful when there is exactly one user that is known to connect. For example when live migrating from one QEMU to another with TLS, libvirt would use the simple scheme to whitelist the TLS cert of the source QEMU.
- List - an full access control list, with optional regex matching. This is more flexible and is used to provide 100% backcompat with the existing HMP ACL commands. The caveat is that we can't create these via the CLI -object arg yet.
- ListFile - the same as List, but with the rules stored in JSON format in an external file. This avoids the -object limitation while also allowing the admin to change list entries on the file. QEMU uses inotify to notice these changes and auto-reload the file contents. This is likely a good default choice for most network services, if the "simple" mechanism isn't sufficient.
- PAM - delegate the username lookup to a PAM module, which opens the door to many options including things like SQL/LDAP lookups.
A later series that follows will integrate this framework into the VNC, NBD, migration, and character device servers.
Changed in v3:
- Added docs for object types in qemu-options.hx
- Added example CLI syntax in header files
- Improved commit messages
Changed in v2:
- Switch to a global shared instance of the file monitor so only a single inotify file descriptor is required
- Require all watches to be registered against directories. File watches are useless in Linux, since they are tied to inodes, and so stop working when editors save by doing a tmpfile + rename dance.
- Change auth list impl to use a directory based watch instead of filename
- Put MTP const-ness fixes in separate patch
- Split QOM change off into separate patch
- Fix conditionals on Win32 build
Daniel P. Berrangé (11):
util: add helper APIs for dealing with inotify in portable manner
qom: don't require user creatable objects to be registered hw/usb: don't set IN_ISDIR for inotify watch in MTP driver hw/usb: fix const-ness for string params in MTP driver hw/usb: switch MTP to use new inotify APIs
authz: add QAuthZ object as an authorization base class
authz: add QAuthZSimple object type for easy whitelist auth checks
authz: add QAuthZList object type for an access control list
authz: add QAuthZListFile object type for a file access control list
authz: add QAuthZPAM object type for authorizing using PAM
authz: delete existing ACL implementation
.gitignore | 4 + MAINTAINERS | 14 ++ Makefile | 17 +- Makefile.objs | 10 ++ Makefile.target | 2 + authz/Makefile.objs | 7 + authz/base.c | 82 +++++++++ authz/list.c | 315 +++++++++++++++++++++++++++++++++ authz/listfile.c | 284 +++++++++++++++++++++++++++++ authz/pamacct.c | 149 ++++++++++++++++ authz/simple.c | 122 +++++++++++++ authz/trace-events | 18 ++ configure | 37 ++++ crypto/tlssession.c | 35 ++-- crypto/trace-events | 2 +- hw/usb/dev-mtp.c | 257 ++++++++++----------------- hw/usb/trace-events | 2 +- include/authz/base.h | 112 ++++++++++++ include/authz/list.h | 106 +++++++++++ include/authz/listfile.h | 110 ++++++++++++ include/authz/pamacct.h | 100 +++++++++++ include/authz/simple.h | 84 +++++++++ include/qemu/acl.h | 66 ------- include/qemu/filemonitor.h | 117 ++++++++++++ monitor.c | 180 ++++++++++++------- qapi/authz.json | 58 ++++++ qapi/qapi-schema.json | 1 + qemu-options.hx | 103 +++++++++++ qom/object.c | 12 +- qom/object_interfaces.c | 16 +- tests/.gitignore | 1 + tests/Makefile.include | 8 +- tests/test-authz-list.c | 171 ++++++++++++++++++ tests/test-crypto-tlssession.c | 15 +- tests/test-io-channel-tls.c | 16 +- ui/vnc-auth-sasl.c | 23 ++- ui/vnc-auth-sasl.h | 5 +- ui/vnc-auth-vencrypt.c | 2 +- ui/vnc-ws.c | 2 +- ui/vnc.c | 37 ++-- ui/vnc.h | 4 +- util/Makefile.objs | 2 +- util/acl.c | 179 ------------------- util/filemonitor.c | 315 +++++++++++++++++++++++++++++++++ util/trace-events | 9 + 45 files changed, 2672 insertions(+), 539 deletions(-) create mode 100644 authz/Makefile.objs create mode 100644 authz/base.c create mode 100644 authz/list.c create mode 100644 authz/listfile.c create mode 100644 authz/pamacct.c create mode 100644 authz/simple.c create mode 100644 authz/trace-events create mode 100644 include/authz/base.h create mode 100644 include/authz/list.h create mode 100644 include/authz/listfile.h create mode 100644 include/authz/pamacct.h create mode 100644 include/authz/simple.h delete mode 100644 include/qemu/acl.h create mode 100644 include/qemu/filemonitor.h create mode 100644 qapi/authz.json create mode 100644 tests/test-authz-list.c delete mode 100644 util/acl.c create mode 100644 util/filemonitor.c
Signature · 1 line
2.17.0
PATCH v3 3/11 hw/usb: don't set IN_ISDIR for inotify watch in MTP driver
IN_ISDIR is not a bit that one can request when registering a watch with inotify_add_watch. Rather it is a bit that is set automatically when reading events from the kernel.
--- hw/usb/dev-mtp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
hw/usb/dev-mtp.c +1 -2
@@ -638,8 +638,7 @@ static void usb_mtp_inotify_cleanup(MTPState *s)static int usb_mtp_add_watch (int inotifyfd,char *path) { -uint32_t mask =IN_CREATE |IN_DELETE |IN_MODIFY | -IN_ISDIR ; +uint32_t mask =IN_CREATE |IN_DELETE |IN_MODIFY ;return inotify_add_watch (inotifyfd, path, mask); }
Signature · 1 line
2.17.0
PATCH v3 1/11 util: add helper APIs for dealing with inotify in portable manner
In reply to Daniel P. BerrangéThe inotify userspace API for reading events is quite horrible, so it is useful to wrap it in a more friendly API to avoid duplicating code across many users in QEMU. Wrapping it also allows introduction of a platform portability layer, so that we can add impls for non-Linux based equivalents in future.
--- MAINTAINERS | 6 + include/qemu/filemonitor.h | 117 ++++++++++++++ util/Makefile.objs | 1 + util/filemonitor.c | 315 +++++++++++++++++++++++++++++++++++++ util/trace-events | 9 ++ 5 files changed, 448 insertions(+) create mode 100644 include/qemu/filemonitor.h create mode 100644 util/filemonitor.c
MAINTAINERS +6 -0
@@ -1779,6 +1779,12 @@ F: include/qemu/sockets.h F: util/qemu-sockets.c F: qapi/sockets.json +File monitor +M: Daniel P. Berrange <[email protected]> +S: Odd fixes +F: util/filemonitor.c +F: include/qemu/filemonitor.h + Throttling infrastructure M: Alberto Garcia <[email protected]> S: Supported
include/qemu/filemonitor.h new file +117 -0
117 lines not on this page · raw message
util/Makefile.objs +1 -0
@@ -48,4 +48,5 @@ util-obj-y += range.o util-obj-y += stats64.o util-obj-y += systemd.o util-obj-y += iova-tree.o +util-obj-y += filemonitor.o util-obj-$(CONFIG_LINUX) += vfio-helpers.o
util/filemonitor.c new file +315 -0
315 lines not on this page · raw message
util/trace-events +9 -0
@@ -21,6 +21,15 @@ buffer_move_empty(const char *buf, size_t len, const char *from) "%s: %zd bytes buffer_move(const char *buf, size_t len, const char *from) "%s: %zd bytes from %s" buffer_free(const char *buf, size_t len) "%s: capacity %zd" +# util/filemonitor.c +qemu_file_monitor_add_watch(void *mon, const char *dirpath, const char *filename, void *cb, void *opaque, int id) "File monitor %p add watch dir='%s' file='%s' cb=%p opaque=%p id=%u" +qemu_file_monitor_remove_watch(void *mon, const char *dirpath, int id) "File monitor %p remove watch dir='%s' id=%u" +qemu_file_monitor_new(void *mon, int fd) "File monitor %p created fd=%d" +qemu_file_monitor_enable_watch(void *mon, const char *dirpath, int id) "File monitor %p enable watch dir='%s' id=%u" +qemu_file_monitor_disable_watch(void *mon, const char *dirpath, int id) "Fle monitor %p disable watch dir='%s' id=%u" +qemu_file_monitor_event(void *mon, const char *dirpath, const char *filename, int mask, unsigned int id) "File monitor %p event dir='%s' file='%s' mask=0x%x id=%u" +qemu_file_monitor_dispatch(void *mon, const char *dirpath, const char *filename, int ev, void *cb, void *opaque, unsigned int id) "File monitor %p dispatch dir='%s' file='%s' ev=%d cb=%p opaque=%p id=%u" + # util/qemu-coroutine.c qemu_aio_coroutine_enter(void *ctx, void *from, void *to, void *opaque) "ctx %p from %p to %p opaque %p" qemu_coroutine_yield(void *from, void *to) "from %p to %p"
Signature · 1 line
2.17.0
PATCH v3 4/11 hw/usb: fix const-ness for string params in MTP driver
In reply to Daniel P. BerrangéVarious functions accepting 'char *' string parameters were missing 'const' qualifiers.
--- hw/usb/dev-mtp.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
hw/usb/dev-mtp.c +4 -4
@@ -368,7 +368,7 @@ static const USBDesc desc = {/* ----------------------------------------------------------------------- */ static MTPObject *usb_mtp_object_alloc (MTPState *s,uint32_t handle, -MTPObject *parent,char *name) +MTPObject *parent,const char *name) {MTPObject *o =g_new0 (MTPObject,1 );
@@ -450,7 +450,7 @@ static MTPObject *usb_mtp_object_lookup(MTPState *s, uint32_t handle) }static MTPObject *usb_mtp_add_child (MTPState *s,MTPObject *o, -char *name) +const char *name) {MTPObject *child =usb_mtp_object_alloc (s, s->next_handle++, o, name);
@@ -469,7 +469,7 @@ static MTPObject *usb_mtp_add_child(MTPState *s, MTPObject *o, }static MTPObject *usb_mtp_object_lookup_name (MTPObject *parent, -char *name,int len) +const char *name,int len) {MTPObject *iter;
@@ -636,7 +636,7 @@ static void usb_mtp_inotify_cleanup(MTPState *s) } } -static int usb_mtp_add_watch (int inotifyfd,char *path) +static int usb_mtp_add_watch (int inotifyfd,const char *path) {uint32_t mask =IN_CREATE |IN_DELETE |IN_MODIFY ;
Signature · 1 line
2.17.0
PATCH v3 5/11 hw/usb: switch MTP to use new inotify APIs
In reply to Daniel P. BerrangéThe internal inotify APIs allow alot of conditional statements to be cleared out, and provide a simpler callback for handling events.
--- hw/usb/dev-mtp.c | 250 ++++++++++++++++---------------------------- hw/usb/trace-events | 2 +- 2 files changed, 93 insertions(+), 159 deletions(-)
hw/usb/dev-mtp.c +92 -158
@@ -15,13 +15,11 @@#include <dirent.h> #include <sys/statvfs.h> -#ifdef CONFIG_INOTIFY1 -#include <sys/inotify.h> -#include "qemu/main-loop.h" -#endif +#include "qemu-common.h" #include "qemu/iov.h" +#include "qemu/filemonitor.h" #include "trace.h" #include "hw/usb.h" #include "desc.h"
@@ -123,7 +121,6 @@ enum { EP_EVENT, }; -#ifdef CONFIG_INOTIFY1 typedef struct MTPMonEntry MTPMonEntry ;struct MTPMonEntry {
@@ -132,7 +129,6 @@ struct MTPMonEntry {QTAILQ_ENTRY (MTPMonEntry) next; }; -#endif struct MTPControl {uint16_t code;
@@ -158,10 +154,8 @@ struct MTPObject {char *name;char *path;struct stat stat; -#ifdef CONFIG_INOTIFY1 -/* inotify watch cookie */ +/* file monitor watch cookie */ int watchfd; -#endif MTPObject *parent;uint32_t nchildren; QLIST_HEAD(, MTPObject) children;
@@ -184,11 +178,8 @@ struct MTPState {bool readonly; QTAILQ_HEAD(, MTPObject) objects; -#ifdef CONFIG_INOTIFY1 -/* inotify descriptor */ -int inotifyfd; +QFileMonitor *file_monitor; QTAILQ_HEAD(events, MTPMonEntry) events; -#endif /* Responder is expecting a write operation */ bool write_pending;struct {
@@ -473,6 +464,10 @@ static MTPObject *usb_mtp_object_lookup_name(MTPObject *parent, {MTPObject *iter; +if (len ==-1 ) { + len =strlen (name); + } + QLIST_FOREACH(iter, &parent->children, list) {if (strncmp (iter->name, name, len) ==0 ) {return iter;
@@ -482,7 +477,6 @@ static MTPObject *usb_mtp_object_lookup_name(MTPObject *parent,return NULL ; } -#ifdef CONFIG_INOTIFY1 static MTPObject *usb_mtp_object_lookup_wd (MTPState *s,int wd) {MTPObject *iter;
@@ -496,158 +490,98 @@ static MTPObject *usb_mtp_object_lookup_wd(MTPState *s, int wd)return NULL ; } -static void inotify_watchfn (void *arg) +static void file_monitor_event (int wd, +QFileMonitorEvent ev, +const char *name, +void *opaque) { -MTPState *s = arg; -ssize_t bytes; -/* From the man page: atleast one event can be read */ -int pos; -char buf[sizeof (struct inotify_event ) +NAME_MAX +1 ]; - -for (;;) { - bytes =read (s->inotifyfd, buf,sizeof (buf)); - pos =0 ; - -if (bytes <=0 ) { -/* Better luck next time */ +MTPState *s = opaque; +int watchfd =0 ; +MTPObject *parent =usb_mtp_object_lookup_wd (s, wd); +MTPMonEntry *entry =NULL ; +MTPObject *o; + +if (!parent) { +return ; + } + +switch (ev) { +case QFILE_MONITOR_EVENT_CREATED : +if (usb_mtp_object_lookup_name (parent, name,-1 )) { +/* Duplicate create event */ return ; } + entry =g_new0 (MTPMonEntry,1 ); + entry->handle = s->next_handle; + entry->event =EVT_OBJ_ADDED ; + o =usb_mtp_add_child (s, parent, name); +if (!o) { +g_free (entry); +return ; + } + o->watchfd = watchfd; +trace_usb_mtp_file_monitor_event (s->dev.addr, name,"Obj Added" ); +break ; +case QFILE_MONITOR_EVENT_DELETED :/* -* TODO: Ignore initiator initiated events. -* For now we are good because the store is RO +* The kernel issues a IN_IGNORED event +* when a dir containing a watchpoint is +* deleted, so we don't have to delete the +* watchpoint */ -while (bytes >0 ) { -char *p = buf + pos; -struct inotify_event *event = (struct inotify_event *)p; -int watchfd =0 ; -uint32_t mask = event->mask & (IN_CREATE |IN_DELETE | -IN_MODIFY |IN_IGNORED ); -MTPObject *parent =usb_mtp_object_lookup_wd (s, event->wd); -MTPMonEntry *entry =NULL ; -MTPObject *o; - - pos = pos +sizeof (struct inotify_event ) + event->len; - bytes = bytes - pos; - -if (!parent) { -continue ; - } - -switch (mask) { -case IN_CREATE : -if (usb_mtp_object_lookup_name - (parent, event->name, event->len)) { -/* Duplicate create event */ -continue ; - } - entry =g_new0 (MTPMonEntry,1 ); - entry->handle = s->next_handle; - entry->event =EVT_OBJ_ADDED ; - o =usb_mtp_add_child (s, parent, event->name); -if (!o) { -g_free (entry); -continue ; - } - o->watchfd = watchfd; -trace_usb_mtp_inotify_event (s->dev.addr, event->name, - event->mask,"Obj Added" ); -break ; - -case IN_DELETE : -/* -* The kernel issues a IN_IGNORED event -* when a dir containing a watchpoint is -* deleted, so we don't have to delete the -* watchpoint -*/ - o =usb_mtp_object_lookup_name (parent, event->name, event->len); -if (!o) { -continue ; - } - entry =g_new0 (MTPMonEntry,1 ); - entry->handle = o->handle; - entry->event =EVT_OBJ_REMOVED ; -trace_usb_mtp_inotify_event (s->dev.addr, o->path, - event->mask,"Obj Deleted" ); -usb_mtp_object_free (s, o); -break ; - -case IN_MODIFY : - o =usb_mtp_object_lookup_name (parent, event->name, event->len); -if (!o) { -continue ; - } - entry =g_new0 (MTPMonEntry,1 ); - entry->handle = o->handle; - entry->event =EVT_OBJ_INFO_CHANGED ; -trace_usb_mtp_inotify_event (s->dev.addr, o->path, - event->mask,"Obj Modified" ); -break ; - -case IN_IGNORED : -trace_usb_mtp_inotify_event (s->dev.addr, parent->path, - event->mask,"Obj parent dir ignored" ); -break ; - -default : -fprintf (stderr,"usb-mtp: failed to parse inotify event\n" ); -continue ; - } + o =usb_mtp_object_lookup_name (parent, name,-1 ); +if (!o) { +return ; + } + entry =g_new0 (MTPMonEntry,1 ); + entry->handle = o->handle; + entry->event =EVT_OBJ_REMOVED ; +trace_usb_mtp_file_monitor_event (s->dev.addr, o->path,"Obj Deleted" ); +usb_mtp_object_free (s, o); +break ; -if (entry) { -QTAILQ_INSERT_HEAD (&s->events, entry, next); - } +case QFILE_MONITOR_EVENT_MODIFIED : + o =usb_mtp_object_lookup_name (parent, name,-1 ); +if (!o) { +return ; } - } -} + entry =g_new0 (MTPMonEntry,1 ); + entry->handle = o->handle; + entry->event =EVT_OBJ_INFO_CHANGED ; +trace_usb_mtp_file_monitor_event (s->dev.addr, o->path,"Obj Modified" ); +break ; -static int usb_mtp_inotify_init (MTPState *s) -{ -int fd; +case QFILE_MONITOR_EVENT_IGNORED : +trace_usb_mtp_file_monitor_event (s->dev.addr, parent->path, +"Obj parent dir ignored" ); +break ; - fd =inotify_init1 (IN_NONBLOCK ); -if (fd ==-1 ) { -return 1 ; +default : +g_assert_not_reached (); } -QTAILQ_INIT (&s->events); - s->inotifyfd = fd; - -qemu_set_fd_handler (fd, inotify_watchfn,NULL , s); - -return 0 ; +if (entry) { +QTAILQ_INSERT_HEAD (&s->events, entry, next); + } } -static void usb_mtp_inotify_cleanup (MTPState *s) +static void usb_mtp_file_monitor_cleanup (MTPState *s) {MTPMonEntry *e, *p; -if (!s->inotifyfd) { -return ; - } - -qemu_set_fd_handler (s->inotifyfd,NULL ,NULL , s); -close (s->inotifyfd); - QTAILQ_FOREACH_SAFE(e, &s->events, next, p) {QTAILQ_REMOVE (&s->events, e, next);g_free (e); } } -static int usb_mtp_add_watch (int inotifyfd,const char *path) -{ -uint32_t mask =IN_CREATE |IN_DELETE |IN_MODIFY ; - -return inotify_add_watch (inotifyfd, path, mask); -} -#endif static void usb_mtp_object_readdir (MTPState *s,MTPObject *o) {struct dirent *entry;DIR *dir; +Error *err =NULL ;if (o->have_children) {return ;
@@ -658,16 +592,19 @@ static void usb_mtp_object_readdir(MTPState *s, MTPObject *o)if (!dir) {return ; } -#ifdef CONFIG_INOTIFY1 -int watchfd =usb_mtp_add_watch (s->inotifyfd, o->path); + +int watchfd =qemu_file_monitor_add_watch (s->file_monitor, o->path,NULL , + file_monitor_event, s, &err);if (watchfd ==-1 ) { -fprintf (stderr,"usb-mtp: failed to add watch for %s\n" , o->path); +fprintf (stderr,"usb-mtp: failed to add watch for %s: %s\n" , o->path, +error_get_pretty (err)); +error_free (err); }else { -trace_usb_mtp_inotify_event (s->dev.addr, o->path, -0 ,"Watch Added" ); +trace_usb_mtp_file_monitor_event (s->dev.addr, o->path, +"Watch Added" ); o->watchfd = watchfd; } -#endif +while ((entry =readdir (dir)) !=NULL ) {usb_mtp_add_child (s, o, entry->d_name); }
@@ -1175,13 +1112,11 @@ enum {/* Assumes that children, if any, have been already freed */ static void usb_mtp_object_free_one (MTPState *s,MTPObject *o) { -#ifndef CONFIG_INOTIFY1 assert (o->nchildren ==0 );QTAILQ_REMOVE (&s->objects, o, next);g_free (o->name);g_free (o->path);g_free (o); -#endif }static int usb_mtp_deletefn (MTPState *s,MTPObject *o,uint32_t trans)
@@ -1280,6 +1215,7 @@ static void usb_mtp_command(MTPState *s, MTPControl *c)MTPData *data_in =NULL ;MTPObject *o =NULL ;uint32_t nres =0 , res0 =0 ; +Error *err =NULL ;/* sanity checks */ if (c->code >=CMD_CLOSE_SESSION && s->session ==0 ) {
@@ -1307,19 +1243,21 @@ static void usb_mtp_command(MTPState *s, MTPControl *c)trace_usb_mtp_op_open_session (s->dev.addr); s->session = c->argv[0 ];usb_mtp_object_alloc (s, s->next_handle++,NULL , s->root); -#ifdef CONFIG_INOTIFY1 -if (usb_mtp_inotify_init (s)) { -fprintf (stderr,"usb-mtp: file monitoring init failed\n" ); + + s->file_monitor =qemu_file_monitor_get_instance (&err); +if (err) { +fprintf (stderr,"usb-mtp: file monitoring init failed: %s\n" , +error_get_pretty (err)); +error_free (err); + }else { +QTAILQ_INIT (&s->events); } -#endif break ;case CMD_CLOSE_SESSION :trace_usb_mtp_op_close_session (s->dev.addr); s->session =0 ; s->next_handle =0 ; -#ifdef CONFIG_INOTIFY1 -usb_mtp_inotify_cleanup (s); -#endif +usb_mtp_file_monitor_cleanup (s);usb_mtp_object_free (s,QTAILQ_FIRST (&s->objects));assert (QTAILQ_EMPTY (&s->objects));break ;
@@ -1532,9 +1470,7 @@ static void usb_mtp_handle_reset(USBDevice *dev)trace_usb_mtp_reset (s->dev.addr); -#ifdef CONFIG_INOTIFY1 -usb_mtp_inotify_cleanup (s); -#endif +usb_mtp_file_monitor_cleanup (s);usb_mtp_object_free (s,QTAILQ_FIRST (&s->objects)); s->session =0 ;usb_mtp_data_free (s->data_in);
@@ -1899,7 +1835,6 @@ static void usb_mtp_handle_data(USBDevice *dev, USBPacket *p) }break ;case EP_EVENT : -#ifdef CONFIG_INOTIFY1 if (!QTAILQ_EMPTY (&s->events)) {struct MTPMonEntry *e =QTAILQ_LAST (&s->events, events);uint32_t handle;
@@ -1923,7 +1858,6 @@ static void usb_mtp_handle_data(USBDevice *dev, USBPacket *p)g_free (e);return ; } -#endif p->status =USB_RET_NAK ;return ;default :
hw/usb/trace-events +1 -1
@@ -237,7 +237,7 @@ usb_mtp_op_unknown(int dev, uint32_t code) "dev %d, command code 0x%x" usb_mtp_object_alloc(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s" usb_mtp_object_free(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s" usb_mtp_add_child(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s" -usb_mtp_inotify_event(int dev, const char *path, uint32_t mask, const char *s) "dev %d, path %s mask 0x%x event %s" +usb_mtp_file_monitor_event(int dev, const char *path, const char *s) "dev %d, path %s event %s" # hw/usb/host-libusb.c usb_host_open_started(int bus, int addr) "dev %d:%d"
Signature · 1 line
2.17.0
PATCH v3 7/11 authz: add QAuthZSimple object type for easy whitelist auth checks
In reply to Daniel P. BerrangéIn many cases a single VM will just need to whilelist a single identity as the allowed user of network services. This is especially the case for TLS live migration (optionally with NBD storage) where we just need to whitelist the x509 certificate distinguished name of the source QEMU host.
Via QMP this can be configured with:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-simple",
"id": "authz0",
"parameters": {
"identity": "fred"
}
}
}Or via the command line
-object authz-simple,id=authz0,identity=fred
--- authz/Makefile.objs | 1 + authz/simple.c | 122 +++++++++++++++++++++++++++++++++++++++++ authz/trace-events | 3 + include/authz/simple.h | 84 ++++++++++++++++++++++++++++ qemu-options.hx | 21 +++++++ 5 files changed, 231 insertions(+) create mode 100644 authz/simple.c create mode 100644 include/authz/simple.h
authz/Makefile.objs +1 -0
@@ -1 +1,2 @@ authz-obj-y += base.o +authz-obj-y += simple.o
authz/simple.c new file +122 -0
122 lines not on this page · raw message
authz/trace-events +3 -0
@@ -2,3 +2,6 @@ # authz/base.c qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p check identity=%s allowed=%d" + +# auth/simple.c +qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *gotidentity) "AuthZ simple %p check want identity=%s got identity=%s"
include/authz/simple.h new file +84 -0
84 lines not on this page · raw message
qemu-options.hx +21 -0
@@ -4392,6 +4392,27 @@ e.g to launch a SEV guest ..... @end example + + +@item -object authz-simple,id=@var{id},identity=@var{string} + +Create an authorization object that will control access to network services. + +The @option{identity} parameter is identifies the user and its format +depends on the network service that authorization object is associated +with. For authorizing based on TLS x509 certificates, the identity must +be the x509 distinguished name. Note that care must be taken to escape +any commas in the distinguished name. + +An example authorization object to validate a x509 distinguished name +would look like: +@example + # $QEMU \ + ... + -object authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB \ + ... +@end example + @end table ETEXI
Signature · 1 line
2.17.0
PATCH v3 6/11 authz: add QAuthZ object as an authorization base class
In reply to Daniel P. BerrangéFrom: "Daniel P. Berrange" <[email protected]>
The current qemu_acl module provides a simple access control list facility inside QEMU, which is used via a set of monitor commands acl_show, acl_policy, acl_add, acl_remove & acl_reset.
Note there is no ability to create ACLs - the network services (eg VNC server) were expected to create ACLs that they want to check.
There is also no way to define ACLs on the command line, nor potentially integrate with external authorization systems like polkit, pam, ldap lookup, etc.
The QAuthZ object defines a minimal abstract QOM class that can be subclassed for creating different authorization providers.
--- MAINTAINERS | 7 +++ Makefile | 10 ++-- Makefile.objs | 6 +++ Makefile.target | 2 + authz/Makefile.objs | 1 + authz/base.c | 82 +++++++++++++++++++++++++++++++ authz/trace-events | 4 ++ include/authz/base.h | 112 +++++++++++++++++++++++++++++++++++++++++++ 8 files changed, 220 insertions(+), 4 deletions(-) create mode 100644 authz/Makefile.objs create mode 100644 authz/base.c create mode 100644 authz/trace-events create mode 100644 include/authz/base.h
MAINTAINERS +7 -0
@@ -1770,6 +1770,13 @@ F: io/ F: include/io/ F: tests/test-io-* +User authorization +M: Daniel P. Berrange <[email protected]> +S: Maintained +F: authz/ +F: include/authz/ +F: tests/test-authz-* + Sockets M: Daniel P. Berrange <[email protected]> M: Gerd Hoffmann <[email protected]>
Makefile +6 -4
@@ -413,6 +413,7 @@ endif dummy := $(call unnest-vars,, \ stub-obj-y \ + authz-obj-y \ chardev-obj-y \ util-obj-y \ qga-obj-y \
@@ -474,6 +475,7 @@ qemu-options.def: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_LIST)) SOFTMMU_SUBDIR_RULES=$(filter %-softmmu,$(SUBDIR_RULES)) +$(SOFTMMU_SUBDIR_RULES): $(authz-obj-y) $(SOFTMMU_SUBDIR_RULES): $(block-obj-y) $(SOFTMMU_SUBDIR_RULES): $(crypto-obj-y) $(SOFTMMU_SUBDIR_RULES): $(io-obj-y)
@@ -536,9 +538,9 @@ COMMON_LDADDS = libqemuutil.a qemu-img.o: qemu-img-cmds.h -qemu-img$(EXESUF): qemu-img.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS) -qemu-nbd$(EXESUF): qemu-nbd.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS) -qemu-io$(EXESUF): qemu-io.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS) +qemu-img$(EXESUF): qemu-img.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS) +qemu-nbd$(EXESUF): qemu-nbd.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS) +qemu-io$(EXESUF): qemu-io.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS) qemu-bridge-helper$(EXESUF): qemu-bridge-helper.o $(COMMON_LDADDS)
@@ -547,7 +549,7 @@ qemu-keymap$(EXESUF): qemu-keymap.o ui/input-keymap.o $(COMMON_LDADDS) fsdev/virtfs-proxy-helper$(EXESUF): fsdev/virtfs-proxy-helper.o fsdev/9p-marshal.o fsdev/9p-iov-marshal.o $(COMMON_LDADDS) fsdev/virtfs-proxy-helper$(EXESUF): LIBS += -lcap -scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS) +scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(authz-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS) ifdef CONFIG_MPATH scsi/qemu-pr-helper$(EXESUF): LIBS += -ludev -lmultipath -lmpathpersist endif
Makefile.objs +6 -0
@@ -62,6 +62,11 @@ util-obj-y += qapi/qapi-introspect.o chardev-obj-y = chardev/ +####################################################################### +# authz-obj-y is code used by both qemu system emulation and qemu-img + +authz-obj-y = authz/ + ####################################################################### # block-obj-y is code used by both qemu system emulation and qemu-img
@@ -199,6 +204,7 @@ trace-events-subdirs = trace-events-subdirs += accel/kvm trace-events-subdirs += accel/tcg trace-events-subdirs += audio +trace-events-subdirs += authz trace-events-subdirs += block trace-events-subdirs += chardev trace-events-subdirs += crypto
Makefile.target +2 -0
@@ -166,6 +166,7 @@ include $(SRC_PATH)/Makefile.objs dummy := $(call unnest-vars,,target-obj-y) target-obj-y-save := $(target-obj-y) dummy := $(call unnest-vars,.., \ + authz-obj-y \ block-obj-y \ block-obj-m \ chardev-obj-y \
@@ -179,6 +180,7 @@ target-obj-y := $(target-obj-y-save) all-obj-y += $(common-obj-y) all-obj-y += $(target-obj-y) all-obj-y += $(qom-obj-y) +all-obj-$(CONFIG_SOFTMMU) += $(authz-obj-y) all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y) $(chardev-obj-y) all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y) all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
authz/Makefile.objs new file +1 -0
@@ -0,0 +1 @@ +authz-obj-y += base.o
authz/base.c new file +82 -0
82 lines not on this page · raw message
authz/trace-events new file +4 -0
@@ -0,0 +1,4 @@ +# See docs/devel/tracing.txt for syntax documentation. + +# authz/base.c +qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p check identity=%s allowed=%d"
include/authz/base.h new file +112 -0
112 lines not on this page · raw message
Signature · 1 line
2.17.0
PATCH v3 9/11 authz: add QAuthZListFile object type for a file access control list
In reply to Daniel P. BerrangéAdd a QAuthZListFile object type that implements the QAuthZ interface. This built-in implementation is a proxy around the QAtuhZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes.
To create an instance of this object via the QMP monitor, the syntax used would be:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-list-file",
"id": "authz0",
"parameters": {
"filename": "/etc/qemu/vnc.acl",
"refresh": "yes"
}
}
}If "refresh" is "yes", inotify is used to monitor the file, automatically reloading changes. If an error occurs during reloading, all authorizations will fail until the file is next successfully loaded.
The /etc/qemu/vnc.acl file would contain a JSON representation of a QAuthZList object
{
"rules": [
{ "match": "fred", "policy": "allow", "format": "exact" },
{ "match": "bob", "policy": "allow", "format": "exact" },
{ "match": "danb", "policy": "deny", "format": "glob" },
{ "match": "dan*", "policy": "allow", "format": "exact" },
],
"policy": "deny"
}This sets up an authorization rule that allows 'fred', 'bob' and anyone whose name starts with 'dan', except for 'danb'. Everyone unmatched is denied.
The object can be loaded on the comand line using
-object authz-list-file,id=authz0,filename=/etc/qemu/vnc.acl,refresh=yes
--- authz/Makefile.objs | 1 + authz/listfile.c | 284 +++++++++++++++++++++++++++++++++++++++ authz/trace-events | 4 + include/authz/listfile.h | 110 +++++++++++++++ qemu-options.hx | 47 +++++++ 5 files changed, 446 insertions(+) create mode 100644 authz/listfile.c create mode 100644 include/authz/listfile.h
authz/Makefile.objs +1 -0
@@ -1,3 +1,4 @@ authz-obj-y += base.o authz-obj-y += simple.o authz-obj-y += list.o +authz-obj-y += listfile.o
authz/listfile.c new file +284 -0
284 lines not on this page · raw message
authz/trace-events +4 -0
@@ -9,3 +9,7 @@ qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *goti # auth/list.c qauthz_list_check_rule(void *authz, const char *identity, const char *rule, int format, int policy) "AuthZ list %p check rule=%s identity=%s format=%d policy=%d" qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ list %p default identity=%s policy=%d" + +# auth/listfile.c +qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load filename=%s" +qauthz_list_file_refresh(void *authz, const char *filename, int success) "AuthZ file %p load filename=%s success=%d"
include/authz/listfile.h new file +110 -0
110 lines not on this page · raw message
qemu-options.hx +47 -0
53 lines not on this page · raw message
Signature · 1 line
2.17.0
PATCH v3 8/11 authz: add QAuthZList object type for an access control list
In reply to Daniel P. BerrangéFrom: "Daniel P. Berrange" <[email protected]>
Add a QAuthZList object type that implements the QAuthZ interface. This built-in implementation maintains a trivial access control list with a sequence of match rules and a final default policy. This replicates the functionality currently provided by the qemu_acl module.
To create an instance of this object via the QMP monitor, the syntax used would be:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-list",
"id": "authz0",
"parameters": {
"rules": [
{ "match": "fred", "policy": "allow", "format": "exact" },
{ "match": "bob", "policy": "allow", "format": "exact" },
{ "match": "danb", "policy": "deny", "format": "glob" },
{ "match": "dan*", "policy": "allow", "format": "exact" },
],
"policy": "deny"
}
}
}This sets up an authorization rule that allows 'fred', 'bob' and anyone whose name starts with 'dan', except for 'danb'. Everyone unmatched is denied.
It is not currently possible to create this via -object, since there is no syntax supported to specify non-scalar properties for objects. This is likely to be addressed by later support for using JSON with -object, or an equivalent approach.
In any case the future "authz-listfile" object can be used from the CLI and is likely a better choice, as it allows the ACL to be refreshed automatically on change.
--- .gitignore | 4 + MAINTAINERS | 1 + Makefile | 7 +- Makefile.objs | 4 + authz/Makefile.objs | 1 + authz/list.c | 315 ++++++++++++++++++++++++++++++++++++++++ authz/trace-events | 4 + include/authz/list.h | 106 ++++++++++++++ qapi/authz.json | 58 ++++++++ qapi/qapi-schema.json | 1 + tests/.gitignore | 1 + tests/Makefile.include | 4 + tests/test-authz-list.c | 171 ++++++++++++++++++++++ 13 files changed, 676 insertions(+), 1 deletion(-) create mode 100644 authz/list.c create mode 100644 include/authz/list.h create mode 100644 qapi/authz.json create mode 100644 tests/test-authz-list.c
.gitignore +4 -0
@@ -47,6 +47,7 @@ /qapi/qapi-commands-trace.[ch] /qapi/qapi-commands-transaction.[ch] /qapi/qapi-commands-ui.[ch] +/qapi/qapi-commands-authz.[ch] /qapi/qapi-commands.[ch] /qapi/qapi-events-block-core.[ch] /qapi/qapi-events-block.[ch]
@@ -65,6 +66,7 @@ /qapi/qapi-events-trace.[ch] /qapi/qapi-events-transaction.[ch] /qapi/qapi-events-ui.[ch] +/qapi/qapi-events-authz.[ch] /qapi/qapi-events.[ch] /qapi/qapi-introspect.[ch] /qapi/qapi-types-block-core.[ch]
@@ -84,6 +86,7 @@ /qapi/qapi-types-trace.[ch] /qapi/qapi-types-transaction.[ch] /qapi/qapi-types-ui.[ch] +/qapi/qapi-types-authz.[ch] /qapi/qapi-types.[ch] /qapi/qapi-visit-block-core.[ch] /qapi/qapi-visit-block.[ch]
@@ -102,6 +105,7 @@ /qapi/qapi-visit-trace.[ch] /qapi/qapi-visit-transaction.[ch] /qapi/qapi-visit-ui.[ch] +/qapi/qapi-visit-authz.[ch] /qapi/qapi-visit.[ch] /qapi/qapi-doc.texi /qemu-doc.html
MAINTAINERS +1 -0
@@ -1774,6 +1774,7 @@ User authorization M: Daniel P. Berrange <[email protected]> S: Maintained F: authz/ +F: qapi/authz.json F: include/authz/ F: tests/test-authz-*
Makefile +6 -1
@@ -598,7 +598,8 @@ qapi-modules = $(SRC_PATH)/qapi/qapi-schema.json $(SRC_PATH)/qapi/common.json \ $(SRC_PATH)/qapi/tpm.json \ $(SRC_PATH)/qapi/trace.json \ $(SRC_PATH)/qapi/transaction.json \ - $(SRC_PATH)/qapi/ui.json + $(SRC_PATH)/qapi/ui.json \ + $(SRC_PATH)/qapi/authz.json qapi/qapi-builtin-types.c qapi/qapi-builtin-types.h \ qapi/qapi-types.c qapi/qapi-types.h \
@@ -619,6 +620,7 @@ qapi/qapi-types-tpm.c qapi/qapi-types-tpm.h \ qapi/qapi-types-trace.c qapi/qapi-types-trace.h \ qapi/qapi-types-transaction.c qapi/qapi-types-transaction.h \ qapi/qapi-types-ui.c qapi/qapi-types-ui.h \ +qapi/qapi-types-authz.c qapi/qapi-types-authz.h \ qapi/qapi-builtin-visit.c qapi/qapi-builtin-visit.h \ qapi/qapi-visit.c qapi/qapi-visit.h \ qapi/qapi-visit-block-core.c qapi/qapi-visit-block-core.h \
@@ -638,6 +640,7 @@ qapi/qapi-visit-tpm.c qapi/qapi-visit-tpm.h \ qapi/qapi-visit-trace.c qapi/qapi-visit-trace.h \ qapi/qapi-visit-transaction.c qapi/qapi-visit-transaction.h \ qapi/qapi-visit-ui.c qapi/qapi-visit-ui.h \ +qapi/qapi-visit-authz.c qapi/qapi-visit-authz.h \ qapi/qapi-commands.h qapi/qapi-commands.c \ qapi/qapi-commands-block-core.c qapi/qapi-commands-block-core.h \ qapi/qapi-commands-block.c qapi/qapi-commands-block.h \
@@ -656,6 +659,7 @@ qapi/qapi-commands-tpm.c qapi/qapi-commands-tpm.h \ qapi/qapi-commands-trace.c qapi/qapi-commands-trace.h \ qapi/qapi-commands-transaction.c qapi/qapi-commands-transaction.h \ qapi/qapi-commands-ui.c qapi/qapi-commands-ui.h \ +qapi/qapi-commands-authz.c qapi/qapi-commands-authz.h \ qapi/qapi-events.c qapi/qapi-events.h \ qapi/qapi-events-block-core.c qapi/qapi-events-block-core.h \ qapi/qapi-events-block.c qapi/qapi-events-block.h \
@@ -674,6 +678,7 @@ qapi/qapi-events-tpm.c qapi/qapi-events-tpm.h \ qapi/qapi-events-trace.c qapi/qapi-events-trace.h \ qapi/qapi-events-transaction.c qapi/qapi-events-transaction.h \ qapi/qapi-events-ui.c qapi/qapi-events-ui.h \ +qapi/qapi-events-authz.c qapi/qapi-events-authz.h \ qapi/qapi-introspect.h qapi/qapi-introspect.c \ qapi/qapi-doc.texi: \ qapi-gen-timestamp ;
Makefile.objs +4 -0
@@ -21,6 +21,7 @@ util-obj-y += qapi/qapi-types-tpm.o util-obj-y += qapi/qapi-types-trace.o util-obj-y += qapi/qapi-types-transaction.o util-obj-y += qapi/qapi-types-ui.o +util-obj-y += qapi/qapi-types-authz.o util-obj-y += qapi/qapi-builtin-visit.o util-obj-y += qapi/qapi-visit.o util-obj-y += qapi/qapi-visit-block-core.o
@@ -40,6 +41,7 @@ util-obj-y += qapi/qapi-visit-tpm.o util-obj-y += qapi/qapi-visit-trace.o util-obj-y += qapi/qapi-visit-transaction.o util-obj-y += qapi/qapi-visit-ui.o +util-obj-y += qapi/qapi-visit-authz.o util-obj-y += qapi/qapi-events.o util-obj-y += qapi/qapi-events-block-core.o util-obj-y += qapi/qapi-events-block.o
@@ -58,6 +60,7 @@ util-obj-y += qapi/qapi-events-tpm.o util-obj-y += qapi/qapi-events-trace.o util-obj-y += qapi/qapi-events-transaction.o util-obj-y += qapi/qapi-events-ui.o +util-obj-y += qapi/qapi-events-authz.o util-obj-y += qapi/qapi-introspect.o chardev-obj-y = chardev/
@@ -160,6 +163,7 @@ common-obj-y += qapi/qapi-commands-tpm.o common-obj-y += qapi/qapi-commands-trace.o common-obj-y += qapi/qapi-commands-transaction.o common-obj-y += qapi/qapi-commands-ui.o +common-obj-y += qapi/qapi-commands-authz.o common-obj-y += qapi/qapi-introspect.o common-obj-y += qmp.o hmp.o endif
authz/Makefile.objs +1 -0
@@ -1,2 +1,3 @@ authz-obj-y += base.o authz-obj-y += simple.o +authz-obj-y += list.o
authz/list.c new file +315 -0
315 lines not on this page · raw message
authz/trace-events +4 -0
@@ -5,3 +5,7 @@ qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p che # auth/simple.c qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *gotidentity) "AuthZ simple %p check want identity=%s got identity=%s" + +# auth/list.c +qauthz_list_check_rule(void *authz, const char *identity, const char *rule, int format, int policy) "AuthZ list %p check rule=%s identity=%s format=%d policy=%d" +qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ list %p default identity=%s policy=%d"
include/authz/list.h new file +106 -0
106 lines not on this page · raw message
qapi/authz.json new file +58 -0
58 lines not on this page · raw message
qapi/qapi-schema.json +1 -0
@@ -89,6 +89,7 @@ { 'include': 'rocker.json' } { 'include': 'tpm.json' } { 'include': 'ui.json' } +{ 'include': 'authz.json' } { 'include': 'migration.json' } { 'include': 'transaction.json' } { 'include': 'trace.json' }
tests/.gitignore +1 -0
@@ -17,6 +17,7 @@ rcutorture test-aio test-aio-multithread test-arm-mptimer +test-authz-simple test-base64 test-bdrv-drain test-bitops
tests/Makefile.include +4 -0
@@ -170,6 +170,7 @@ check-unit-y += tests/ptimer-test$(EXESUF) gcov-files-ptimer-test-y = hw/core/ptimer.c check-unit-y += tests/test-qapi-util$(EXESUF) gcov-files-test-qapi-util-y = qapi/qapi-util.c +check-unit-y += tests/test-authz-list$(EXESUF) check-block-$(CONFIG_POSIX) += tests/qemu-iotests-quick.sh
@@ -666,6 +667,9 @@ tests/test-timed-average$(EXESUF): tests/test-timed-average.o $(test-util-obj-y) tests/test-base64$(EXESUF): tests/test-base64.o $(test-util-obj-y) tests/ptimer-test$(EXESUF): tests/ptimer-test.o tests/ptimer-test-stubs.o hw/core/ptimer.o +tests/test-authz-list$(EXESUF): tests/test-authz-list.o \ + $(test-util-obj-y) $(authz-obj-y) $(qom-obj-y) + tests/test-logging$(EXESUF): tests/test-logging.o $(test-util-obj-y) tests/test-replication$(EXESUF): tests/test-replication.o $(test-util-obj-y) \
tests/test-authz-list.c new file +171 -0
171 lines not on this page · raw message
Signature · 1 line
2.17.0
PATCH v3 10/11 authz: add QAuthZPAM object type for authorizing using PAM
In reply to Daniel P. BerrangéFrom: "Daniel P. Berrange" <[email protected]>
Add an authorization backend that talks to PAM to check whether the user identity is allowed. This only uses the PAM account validation facility, which is essentially just a check to see if the provided username is permitted access. It doesn't use the authentication or session parts of PAM, since that's dealt with by the relevant part of QEMU (eg VNC server).
Consider starting QEMU with a VNC server and telling it to use TLS with x509 client certificates and configuring it to use an PAM to validate the x509 distinguished name. In this example we're telling it to use PAM for the QAuthZ impl with a service name of "qemu-vnc"
$ qemu-system-x86_64 \
-object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-pam,id=authz0,service=qemu-vnc \
-vnc :1,tls-creds=tls0,tls-authz=authz0This requires an /etc/pam/qemu-vnc file to be created with the auth rules. A very simple file based whitelist can be setup using
$ cat > /etc/pam/qemu-vnc <<EOF account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow EOF
The /etc/qemu/vnc.allow file simply contains one username per line. Any username not in the file is denied. The usernames in this example are the x509 distinguished name from the client's x509 cert.
$ cat > /etc/qemu/vnc.allow <<EOF CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB EOF
More interesting would be to configure PAM to use an LDAP backend, so that the QEMU authorization check data can be centralized instead of requiring each compute host to have file maintained.
The main limitation with this PAM module is that the rules apply to all QEMU instances on the host. Setting up different rules per VM, would require creating a separate PAM service name & config file for every guest. An alternative approach for the future might be to not pass in the plain username to PAM, but instead combine the VM name or UUID with the username. This requires further consideration though.
--- authz/Makefile.objs | 3 + authz/pamacct.c | 149 ++++++++++++++++++++++++++++++++++++++++ authz/trace-events | 3 + configure | 37 ++++++++++ include/authz/pamacct.h | 100 +++++++++++++++++++++++++++ qemu-options.hx | 35 ++++++++++ 6 files changed, 327 insertions(+) create mode 100644 authz/pamacct.c create mode 100644 include/authz/pamacct.h
authz/Makefile.objs +3 -0
@@ -2,3 +2,6 @@ authz-obj-y += base.o authz-obj-y += simple.o authz-obj-y += list.o authz-obj-y += listfile.o +authz-obj-$(CONFIG_AUTH_PAM) += pamacct.o + +pamacct.o-libs = -lpam
authz/pamacct.c new file +149 -0
149 lines not on this page · raw message
authz/trace-events +3 -0
@@ -13,3 +13,6 @@ qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ # auth/listfile.c qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load filename=%s" qauthz_list_file_refresh(void *authz, const char *filename, int success) "AuthZ file %p load filename=%s success=%d" + +# auth/pam.c +qauthz_pam_check(void *authz, const char *identity, const char *service) "AuthZ PAM %p identity=%s service=%s"
configure +37 -0
@@ -445,6 +445,7 @@ nettle_kdf="no" gcrypt="" gcrypt_hmac="no" gcrypt_kdf="no" +auth_pam="" vte="" virglrenderer="" tpm="yes"
@@ -1310,6 +1311,10 @@ for opt do ;; --enable-gcrypt) gcrypt="yes" ;; + --disable-auth-pam) auth_pam="no" + ;; + --enable-auth-pam) auth_pam="yes" + ;; --enable-rdma) rdma="yes" ;; --disable-rdma) rdma="no"
@@ -1575,6 +1580,7 @@ disabled with --disable-FEATURE, default is enabled if available: gnutls GNUTLS cryptography support nettle nettle cryptography support gcrypt libgcrypt cryptography support + auth-pam PAM access control sdl SDL UI --with-sdlabi select preferred SDL ABI 1.2 or 2.0 gtk gtk UI
@@ -2814,6 +2820,33 @@ else fi +########################################## +# PAM probe + +if test "x$auth_pam" != "no"; then + cat > $TMPC <<EOF +#include <security/pam_appl.h> +#include <stdio.h> +int main(void) { + const char *service_name = "qemu"; + const char *user = "frank"; + const struct pam_conv *pam_conv = NULL; + pam_handle_t *pamh = NULL; + pam_start(service_name, user, pam_conv, &pamh); + return 0; +} +EOF + if compile_prog "" "-lpam" ; then + auth_pam=yes + else + if test "$auth_pam" = "yes"; then + feature_not_found "PAM" "Install pam-devel" + else + auth_pam=no + fi + fi +fi + ########################################## # getifaddrs (for tests/test-io-channel-socket )
@@ -5827,6 +5860,7 @@ echo "libgcrypt kdf $gcrypt_kdf" echo "nettle $nettle $(echo_version $nettle $nettle_version)" echo "nettle kdf $nettle_kdf" echo "libtasn1 $tasn1" +echo "PAM $auth_pam" echo "curses support $curses" echo "virgl support $virglrenderer $(echo_version $virglrenderer $virgl_version)" echo "curl support $curl"
@@ -6287,6 +6321,9 @@ fi if test "$tasn1" = "yes" ; then echo "CONFIG_TASN1=y" >> $config_host_mak fi +if test "$auth_pam" = "yes" ; then + echo "CONFIG_AUTH_PAM=y" >> $config_host_mak +fi if test "$have_ifaddrs_h" = "yes" ; then echo "HAVE_IFADDRS_H=y" >> $config_host_mak fi
include/authz/pamacct.h new file +100 -0
100 lines not on this page · raw message
qemu-options.hx +35 -0
@@ -4460,6 +4460,41 @@ would look like: ... @end example +@item -object authz-pam,id=@var{id},service=@var{string} + +Create an authorization object that will control access to network services. + +The @option{service} parameter provides the name of a PAM service to use +for authorization. It requires that a file @code{/etc/pam.d/@var{service}} +exist to provide the configuration for the @code{account} subsystem. + +An example authorization object to validate a TLS x509 distinguished +name would look like: + +@example + # $QEMU \ + ... + -object authz-simple,id=auth0,service=qemu-vnc + ... +@end example + +There would then be a corresponding config file for PAM at +@code{/etc/pam.d/qemu-vnc} that contains: + +@example +account requisite pam_listfile.so item=user sense=allow \ + file=/etc/qemu/vnc.allow +@end example + +Finally the @code{/etc/qemu/vnc.allow} file would contain +the list of x509 distingished names that are permitted +access + +@example +CN=laptop.example.com,O=Example Home,L=London,ST=London,C=GB +@end example + + @end table ETEXI
Signature · 1 line
2.17.0
PATCH v3 11/11 authz: delete existing ACL implementation
In reply to Daniel P. BerrangéFrom: "Daniel P. Berrange" <[email protected]>
The 'qemu_acl' type was a previous non-QOM based attempt to provide an authorization facility in QEMU. Because it is non-QOM based it cannot be created via the command line and requires special monitor commands to manipulate it.
The new QAuthZ subclasses provide a superset of the functionality in qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor commands are converted to use the new QAuthZSimple data type instead in order to provide temporary backwards compatibility.
--- crypto/tlssession.c | 35 ++++--- crypto/trace-events | 2 +- include/qemu/acl.h | 66 ------------ monitor.c | 180 ++++++++++++++++++++++----------- tests/Makefile.include | 4 +- tests/test-crypto-tlssession.c | 15 ++- tests/test-io-channel-tls.c | 16 ++- ui/vnc-auth-sasl.c | 23 +++-- ui/vnc-auth-sasl.h | 5 +- ui/vnc-auth-vencrypt.c | 2 +- ui/vnc-ws.c | 2 +- ui/vnc.c | 37 ++++--- ui/vnc.h | 4 +- util/Makefile.objs | 1 - util/acl.c | 179 -------------------------------- 15 files changed, 210 insertions(+), 361 deletions(-) delete mode 100644 include/qemu/acl.h delete mode 100644 util/acl.c
crypto/tlssession.c +17 -18
@@ -23,7 +23,7 @@#include "crypto/tlscredsanon.h" #include "crypto/tlscredsx509.h" #include "qapi/error.h" -#include "qemu/acl.h" +#include "authz/base.h" #include "trace.h" #ifdef CONFIG_GNUTLS
@@ -36,7 +36,7 @@ struct QCryptoTLSSession {QCryptoTLSCreds *creds;gnutls_session_t handle;char *hostname; -char *aclname; +char *authzid;bool handshakeComplete;QCryptoTLSSessionWriteFunc writeFunc;QCryptoTLSSessionReadFunc readFunc;
@@ -55,7 +55,7 @@ qcrypto_tls_session_free(QCryptoTLSSession *session)gnutls_deinit (session->handle);g_free (session->hostname);g_free (session->peername); -g_free (session->aclname); +g_free (session->authzid);object_unref (OBJECT (session->creds));g_free (session); }
@@ -92,7 +92,7 @@ qcrypto_tls_session_pull(void *opaque, void *buf, size_t len)QCryptoTLSSession *qcrypto_tls_session_new (QCryptoTLSCreds *creds,const char *hostname, -const char *aclname, +const char *authzid,QCryptoTLSCredsEndpoint endpoint,Error **errp) {
@@ -102,13 +102,13 @@ qcrypto_tls_session_new(QCryptoTLSCreds *creds, session =g_new0 (QCryptoTLSSession,1 );trace_qcrypto_tls_session_new ( session, creds, hostname ? hostname :"<none>" , - aclname ? aclname :"<none>" , endpoint); + authzid ? authzid :"<none>" , endpoint);if (hostname) { session->hostname =g_strdup (hostname); } -if (aclname) { - session->aclname =g_strdup (aclname); +if (authzid) { + session->authzid =g_strdup (authzid); } session->creds = creds;object_ref (OBJECT (creds));
@@ -220,6 +220,7 @@ qcrypto_tls_session_check_certificate(QCryptoTLSSession *session,unsigned int nCerts, i;time_t now;gnutls_x509_crt_t cert =NULL ; +Error *err =NULL ; now =time (NULL );if (now == ((time_t)-1 )) {
@@ -307,19 +308,17 @@ qcrypto_tls_session_check_certificate(QCryptoTLSSession *session, gnutls_strerror(ret)); goto error; } -if (session->aclname) { -qemu_acl *acl =qemu_acl_find (session->aclname); -int allow; -if (!acl) { -error_setg (errp,"Cannot find ACL %s" , - session->aclname); +if (session->authzid) { +bool allow; + + allow =qauthz_is_allowed_by_id (session->authzid, + session->peername, &err); +if (err) { +error_propagate (errp, err); goto error; } - - allow =qemu_acl_party_is_allowed (acl, session->peername); -if (!allow) { -error_setg (errp,"TLS x509 ACL check for %s is denied" , +error_setg (errp,"TLS x509 authz check for %s is denied" , session->peername); goto error; }
@@ -506,7 +505,7 @@ qcrypto_tls_session_get_peer_name(QCryptoTLSSession *session) QCryptoTLSSession * qcrypto_tls_session_new(QCryptoTLSCreds *creds G_GNUC_UNUSED, const char *hostname G_GNUC_UNUSED, - const char *aclname G_GNUC_UNUSED, + const char *authzid G_GNUC_UNUSED, QCryptoTLSCredsEndpoint endpoint G_GNUC_UNUSED, Error **errp) {
crypto/trace-events +1 -1
@@ -16,5 +16,5 @@ qcrypto_tls_creds_x509_load_cert(void *creds, int isServer, const char *file) "T qcrypto_tls_creds_x509_load_cert_list(void *creds, const char *file) "TLS creds x509 load cert list creds=%p file=%s" # crypto/tlssession.c -qcrypto_tls_session_new(void *session, void *creds, const char *hostname, const char *aclname, int endpoint) "TLS session new session=%p creds=%p hostname=%s aclname=%s endpoint=%d" +qcrypto_tls_session_new(void *session, void *creds, const char *hostname, const char *authzid, int endpoint) "TLS session new session=%p creds=%p hostname=%s authzid=%s endpoint=%d" qcrypto_tls_session_check_creds(void *session, const char *status) "TLS session check creds session=%p status=%s"
include/qemu/acl.h deleted +0 -66
66 lines not on this page · raw message
monitor.c +120 -60
233 lines not on this page · raw message
tests/Makefile.include +2 -2
@@ -610,8 +610,8 @@ test-qom-obj-y = $(qom-obj-y) $(test-util-obj-y) test-qapi-obj-y = tests/test-qapi-visit.o tests/test-qapi-types.o \ tests/test-qapi-events.o tests/test-qapi-introspect.o \ $(test-qom-obj-y) -benchmark-crypto-obj-y = $(crypto-obj-y) $(test-qom-obj-y) -test-crypto-obj-y = $(crypto-obj-y) $(test-qom-obj-y) +benchmark-crypto-obj-y = $(authz-obj-y) $(crypto-obj-y) $(test-qom-obj-y) +test-crypto-obj-y = $(authz-obj-y) $(crypto-obj-y) $(test-qom-obj-y) test-io-obj-y = $(io-obj-y) $(test-crypto-obj-y) test-block-obj-y = $(block-obj-y) $(test-io-obj-y) tests/iothread.o
tests/test-crypto-tlssession.c +10 -5
@@ -26,7 +26,7 @@#include "qom/object_interfaces.h" #include "qapi/error.h" #include "qemu/sockets.h" -#include "qemu/acl.h" +#include "authz/list.h" #ifdef QCRYPTO_HAVE_TLS_TEST_SUPPORT
@@ -112,7 +112,7 @@ static void test_crypto_tls_session(const void *opaque)QCryptoTLSCreds *serverCreds;QCryptoTLSSession *clientSess =NULL ;QCryptoTLSSession *serverSess =NULL ; -qemu_acl *acl; +QAuthZList *auth;const char *const *wildcards;int channel[2 ];bool clientShake = false;
@@ -171,11 +171,15 @@ static void test_crypto_tls_session(const void *opaque) &err);g_assert (serverCreds !=NULL ); - acl =qemu_acl_init ("tlssessionacl" ); -qemu_acl_reset (acl); + auth =qauthz_list_new ("tlssessionacl" , +QAUTHZ_LIST_POLICY_DENY , + &error_abort); wildcards = data->wildcards;while (wildcards && *wildcards) { -qemu_acl_append (acl,0 , *wildcards); +qauthz_list_append_rule (auth, *wildcards, +QAUTHZ_LIST_POLICY_ALLOW , +QAUTHZ_LIST_FORMAT_GLOB , + &error_abort); wildcards++; }
@@ -265,6 +269,7 @@ static void test_crypto_tls_session(const void *opaque)object_unparent (OBJECT (serverCreds));object_unparent (OBJECT (clientCreds)); +object_unparent (OBJECT (auth));qcrypto_tls_session_free (serverSess);qcrypto_tls_session_free (clientSess);
tests/test-io-channel-tls.c +11 -5
@@ -29,7 +29,7 @@#include "io-channel-helpers.h" #include "crypto/init.h" #include "crypto/tlscredsx509.h" -#include "qemu/acl.h" +#include "authz/list.h" #include "qom/object_interfaces.h" #ifdef QCRYPTO_HAVE_TLS_TEST_SUPPORT
@@ -116,7 +116,7 @@ static void test_io_channel_tls(const void *opaque)QIOChannelTLS *serverChanTLS;QIOChannelSocket *clientChanSock;QIOChannelSocket *serverChanSock; -qemu_acl *acl; +QAuthZList *auth;const char *const *wildcards;int channel[2 ];struct QIOChannelTLSHandshakeData clientHandshake = { false, false };
@@ -167,11 +167,15 @@ static void test_io_channel_tls(const void *opaque) &err);g_assert (serverCreds !=NULL ); - acl =qemu_acl_init ("channeltlsacl" ); -qemu_acl_reset (acl); + auth =qauthz_list_new ("channeltlsacl" , +QAUTHZ_LIST_POLICY_DENY , + &error_abort); wildcards = data->wildcards;while (wildcards && *wildcards) { -qemu_acl_append (acl,0 , *wildcards); +qauthz_list_append_rule (auth, *wildcards, +QAUTHZ_LIST_POLICY_ALLOW , +QAUTHZ_LIST_FORMAT_GLOB , + &error_abort); wildcards++; }
@@ -259,6 +263,8 @@ static void test_io_channel_tls(const void *opaque)object_unref (OBJECT (serverChanSock));object_unref (OBJECT (clientChanSock)); +object_unparent (OBJECT (auth)); +close (channel[0 ]);close (channel[1 ]); }
ui/vnc-auth-sasl.c +16 -7
@@ -24,6 +24,7 @@#include "qemu/osdep.h" #include "qapi/error.h" +#include "authz/base.h" #include "vnc.h" #include "trace.h"
@@ -146,13 +147,14 @@ size_t vnc_client_read_sasl(VncState *vs)static int vnc_auth_sasl_check_access (VncState *vs) {const void *val; -int err; -int allow; +int rv; +Error *err =NULL ; +bool allow; - err =sasl_getprop (vs->sasl.conn,SASL_USERNAME , &val); -if (err !=SASL_OK ) { + rv =sasl_getprop (vs->sasl.conn,SASL_USERNAME , &val); +if (rv !=SASL_OK ) {trace_vnc_auth_fail (vs, vs->auth,"Cannot fetch SASL username" , -sasl_errstring (err,NULL ,NULL )); +sasl_errstring (rv,NULL ,NULL ));return -1 ; }if (val ==NULL ) {
@@ -163,12 +165,19 @@ static int vnc_auth_sasl_check_access(VncState *vs) vs->sasl.username =g_strdup ((const char *)val);trace_vnc_auth_sasl_username (vs, vs->sasl.username); -if (vs->vd->sasl.acl ==NULL ) { +if (vs->vd->sasl.authzid ==NULL ) {trace_vnc_auth_sasl_acl (vs,1 );return 0 ; } - allow =qemu_acl_party_is_allowed (vs->vd->sasl.acl, vs->sasl.username); + allow =qauthz_is_allowed_by_id (vs->vd->sasl.authzid, + vs->sasl.username, &err); +if (err) { +trace_vnc_auth_fail (vs, vs->auth,"Error from authz" , +error_get_pretty (err)); +error_free (err); +return -1 ; + }trace_vnc_auth_sasl_acl (vs, allow);return allow ?0 :-1 ;
ui/vnc-auth-sasl.h +3 -2
@@ -30,8 +30,8 @@typedef struct VncStateSASL VncStateSASL ;typedef struct VncDisplaySASL VncDisplaySASL ; -#include "qemu/acl.h" #include "qemu/main-loop.h" +#include "authz/base.h" struct VncStateSASL {sasl_conn_t *conn;
@@ -60,7 +60,8 @@ struct VncStateSASL { };struct VncDisplaySASL { -qemu_acl *acl; +QAuthZ *authz; +char *authzid; };void vnc_sasl_client_cleanup (VncState *vs);
ui/vnc-auth-vencrypt.c +1 -1
@@ -109,7 +109,7 @@ static int protocol_client_vencrypt_auth(VncState *vs, uint8_t *data, size_t len tls =qio_channel_tls_new_server ( vs->ioc, vs->vd->tlscreds, - vs->vd->tlsaclname, + vs->vd->tlsauthzid, &err);if (!tls) { trace_vnc_auth_fail(vs, vs->auth, "TLS setup failed",
ui/vnc-ws.c +1 -1
@@ -62,7 +62,7 @@ gboolean vncws_tls_handshake_io(QIOChannel *ioc G_GNUC_UNUSED, tls =qio_channel_tls_new_server ( vs->ioc, vs->vd->tlscreds, - vs->vd->tlsaclname, + vs->vd->tlsauthzid, &err);if (!tls) {VNC_DEBUG ("Failed to setup TLS %s\n" ,error_get_pretty (err));
ui/vnc.c +25 -12
@@ -33,7 +33,7 @@#include "qemu/option.h" #include "qemu/sockets.h" #include "qemu/timer.h" -#include "qemu/acl.h" +#include "authz/list.h" #include "qemu/config-file.h" #include "qapi/qapi-events.h" #include "qapi/error.h"
@@ -3267,12 +3267,24 @@ static void vnc_display_close(VncDisplay *vd)object_unparent (OBJECT (vd->tlscreds)); vd->tlscreds =NULL ; } -g_free (vd->tlsaclname); - vd->tlsaclname =NULL ; +if (vd->tlsauthz) { +object_unparent (OBJECT (vd->tlsauthz)); + vd->tlsauthz =NULL ; + } +g_free (vd->tlsauthzid); + vd->tlsauthzid =NULL ;if (vd->lock_key_sync) {qemu_remove_led_event_handler (vd->led); vd->led =NULL ; } +#ifdef CONFIG_VNC_SASL +if (vd->sasl.authz) { +object_unparent (OBJECT (vd->sasl.authz)); + vd->sasl.authz =NULL ; + } +g_free (vd->sasl.authzid); + vd->sasl.authzid =NULL ; +#endif }int vnc_display_password (const char *id,const char *password)
@@ -4019,23 +4031,24 @@ void vnc_display_open(const char *id, Error **errp)if (acl) {if (strcmp (vd->id,"default" ) ==0 ) { - vd->tlsaclname =g_strdup ("vnc.x509dname" ); + vd->tlsauthzid =g_strdup ("vnc.x509dname" ); }else { - vd->tlsaclname =g_strdup_printf ("vnc.%s.x509dname" , vd->id); + vd->tlsauthzid =g_strdup_printf ("vnc.%s.x509dname" , vd->id); } -qemu_acl_init (vd->tlsaclname); + vd->tlsauthz =QAUTHZ (qauthz_list_new (vd->tlsauthzid, +QAUTHZ_LIST_POLICY_DENY , + &error_abort)); }#ifdef CONFIG_VNC_SASL if (acl && sasl) { -char *aclname; -if (strcmp (vd->id,"default" ) ==0 ) { - aclname =g_strdup ("vnc.username" ); + vd->sasl.authzid =g_strdup ("vnc.username" ); }else { - aclname =g_strdup_printf ("vnc.%s.username" , vd->id); + vd->sasl.authzid =g_strdup_printf ("vnc.%s.username" , vd->id); } - vd->sasl.acl =qemu_acl_init (aclname); -g_free (aclname); + vd->sasl.authz =QAUTHZ (qauthz_list_new (vd->sasl.authzid, +QAUTHZ_LIST_POLICY_DENY , + &error_abort)); }#endif
ui/vnc.h +3 -1
@@ -39,6 +39,7 @@#include "io/channel-socket.h" #include "io/channel-tls.h" #include "io/net-listener.h" +#include "authz/base.h" #include <zlib.h> #include "keymaps.h"
@@ -177,7 +178,8 @@ struct VncDisplaybool lossy;bool non_adaptive;QCryptoTLSCreds *tlscreds; -char *tlsaclname; +QAuthZ *tlsauthz; +char *tlsauthzid;#ifdef CONFIG_VNC_SASL VncDisplaySASL sasl;#endif
util/Makefile.objs +0 -1
@@ -19,7 +19,6 @@ util-obj-y += envlist.o path.o module.o util-obj-y += host-utils.o util-obj-y += bitmap.o bitops.o hbitmap.o util-obj-y += fifo8.o -util-obj-y += acl.o util-obj-y += cacheinfo.o util-obj-y += error.o qemu-error.o util-obj-y += id.o
util/acl.c deleted +0 -179
179 lines not on this page · raw message
Signature · 1 line
2.17.0
Re: [Qemu-devel] [PATCH v3 09/11] authz: add QAuthZListFile object type for a file access control list
In reply to Daniel P. BerrangéQuoted 20 lines · * Daniel P. Berrangé ([email protected]) wrote:
Add a QAuthZListFile object type that implements the QAuthZ interface. This built-in implementation is a proxy around the QAtuhZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes.
To create an instance of this object via the QMP monitor, the syntax used would be:
{ "execute": "object-add", "arguments": { "qom-type": "authz-list-file", "id": "authz0", "parameters": { "filename": "/etc/qemu/vnc.acl", "refresh": "yes" } } }
Quoted 4 lines
If "refresh" is "yes", inotify is used to monitor the file, automatically reloading changes. If an error occurs during reloading, all authorizations will fail until the file is next successfully loaded.
I'm curious about the 'refresh' stuff:
a) If refresh=no is there a way to explicitly ask for a refresh when some tool knows it's finished with fiddling with the file.
b) am I right in thinking you're actually monitoring the directory for changes and retriggering on directory changes? So it'll trigger on the normal trick of renaming the modified file over the original?
c) I'm a little concerned about making it automatic; if all the qemus on a system all wake up and reparse the file at the same time.
Dave
Quoted 520 lines
The
/etc/qemu/vnc.aclfile would contain a JSON representation of a QAuthZList object{ "rules": [ { "match": "fred", "policy": "allow", "format": "exact" }, { "match": "bob", "policy": "allow", "format": "exact" }, { "match": "danb", "policy": "deny", "format": "glob" }, { "match": "dan*", "policy": "allow", "format": "exact" }, ], "policy": "deny" }This sets up an authorization rule that allows 'fred', 'bob' and anyone whose name starts with 'dan', except for 'danb'. Everyone unmatched is denied.
The object can be loaded on the comand line using
-object authz-list-file,id=authz0,filename=/etc/qemu/vnc.acl,refresh=yes
Signed-off-by Daniel P. Berrangé <[email protected]>--- authz/Makefile.objs | 1 + authz/listfile.c | 284 +++++++++++++++++++++++++++++++++++++++ authz/trace-events | 4 + include/authz/listfile.h | 110 +++++++++++++++ qemu-options.hx | 47 +++++++ 5 files changed, 446 insertions(+) create mode 100644 authz/listfile.c create mode 100644 include/authz/listfile.hauthz/Makefile.objs +1
-0@@ -1,3 +1,4 @@ authz-obj-y += base.o authz-obj-y += simple.o authz-obj-y += list.o +authz-obj-y += listfile.oauthz/listfile.c new file +284
-0@@ -0,0 +1,284 @@ +/* +* QEMU access control list file authorization driver +* +* Copyright (c) 2018 Red Hat, Inc. +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see <http://www.gnu.org/licenses/>. +* +*/ + +#include "qemu/osdep.h" +#include "authz/listfile.h" +#include "authz/trace.h" +#include "qemu/error-report.h" +#include "qemu/main-loop.h" +#include "qemu/sockets.h" +#include "qemu/filemonitor.h" +#include "qom/object_interfaces.h" +#include "qapi/qapi-visit-authz.h" +#include "qapi/qmp/qjson.h" +#include "qapi/qmp/qobject.h" +#include "qapi/qmp/qerror.h" +#include "qapi/qobject-input-visitor.h" + + +static bool +qauthz_list_file_is_allowed (QAuthZ *authz, +const char *identity, +Error **errp) +{ +QAuthZListFile *fauthz =QAUTHZ_LIST_FILE (authz); +if (fauthz->list) { +return qauthz_is_allowed (fauthz->list, identity, errp); + } + +return false; +} + + +static QAuthZ * +qauthz_list_file_load (QAuthZListFile *fauthz,Error **errp) +{ +GError *err =NULL ; +gchar *content =NULL ; +gsize len; +QObject *obj =NULL ; +QDict *pdict; +Visitor *v =NULL ; +QAuthZ *ret =NULL ; + +trace_qauthz_list_file_load (fauthz, fauthz->filename); +if (!g_file_get_contents (fauthz->filename, &content, &len, &err)) { +error_setg (errp,"Unable to read '%s': %s" , + fauthz->filename, err->message); + goto cleanup; + } + + obj =qobject_from_json (content, errp); +if (!obj) { + goto cleanup; + } + + pdict =qobject_to (QDict, obj); +if (!pdict) { +error_setg (errp,QERR_INVALID_PARAMETER_TYPE ,"obj" ,"dict" ); + goto cleanup; + } + + v =qobject_input_visitor_new (obj); + + ret = (QAuthZ *)user_creatable_add_type (TYPE_QAUTHZ_LIST , +NULL , pdict, v, errp); + + cleanup: +visit_free (v); +qobject_unref (obj); +if (err) { +g_error_free (err); + } +g_free (content); +return ret; +} + + +static void +qauthz_list_file_event(int wd G_GNUC_UNUSED, + QFileMonitorEvent ev G_GNUC_UNUSED, + const char *name G_GNUC_UNUSED, +void *opaque) +{ +QAuthZListFile *fauthz = opaque; +Error *err =NULL ; + +if (ev !=QFILE_MONITOR_EVENT_MODIFIED && + ev !=QFILE_MONITOR_EVENT_CREATED ) +return ; + +object_unref (OBJECT (fauthz->list)); + fauthz->list =qauthz_list_file_load (fauthz, &err); +trace_qauthz_list_file_refresh (fauthz, + fauthz->filename, fauthz->list ?1 :0 ); +if (!fauthz->list) { +error_report_err (err); + } +} + +static void +qauthz_list_file_complete (UserCreatable *uc,Error **errp) +{ +QAuthZListFile *fauthz =QAUTHZ_LIST_FILE (uc); + + fauthz->list =qauthz_list_file_load (fauthz, errp); + +if (fauthz->refresh) { +gchar *dir, *file; + fauthz->file_monitor =qemu_file_monitor_get_instance (errp); +if (!fauthz->file_monitor) { +return ; + } + + dir =g_path_get_dirname (fauthz->filename); +if (g_str_equal (dir,"." )) { +error_setg (errp,"Filename must be an absolute path" ); +g_free (dir); +return ; + } + file =g_path_get_basename (fauthz->filename); +if (g_str_equal (file,"." )) { +error_setg (errp,"Path has no trailing filename component" ); +g_free (file); +g_free (dir); +return ; + } + + fauthz->file_watch =qemu_file_monitor_add_watch ( + fauthz->file_monitor, dir, file, + qauthz_list_file_event, fauthz, errp); +g_free (file); +g_free (dir); +if (fauthz->file_watch <0 ) { +return ; + } + } +} + + +static void +qauthz_list_file_prop_set_filename (Object *obj, +const char *value, + Error **errp G_GNUC_UNUSED) +{ +QAuthZListFile *authz =QAUTHZ_LIST_FILE (obj); + + authz->filename =g_strdup (value); +} + + +static char * +qauthz_list_file_prop_get_filename (Object *obj, + Error **errp G_GNUC_UNUSED) +{ +QAuthZListFile *authz =QAUTHZ_LIST_FILE (obj); + +return g_strdup (authz->filename); +} + + +static void +qauthz_list_file_prop_set_refresh (Object *obj, +bool value, + Error **errp G_GNUC_UNUSED) +{ +QAuthZListFile *authz =QAUTHZ_LIST_FILE (obj); + + authz->refresh = value; +} + + +static bool +qauthz_list_file_prop_get_refresh (Object *obj, + Error **errp G_GNUC_UNUSED) +{ +QAuthZListFile *authz =QAUTHZ_LIST_FILE (obj); + +return authz->refresh; +} + + +static void +qauthz_list_file_finalize (Object *obj) +{ +QAuthZListFile *authz =QAUTHZ_LIST_FILE (obj); + +if (authz->file_watch !=-1 && authz->file_monitor) { +gchar *dir =g_path_get_dirname (authz->filename); +qemu_file_monitor_remove_watch (authz->file_monitor, + dir, + authz->file_watch); +g_free (dir); + } +object_unref (OBJECT (authz->list)); +g_free (authz->filename); +} + + +static void +qauthz_list_file_class_init (ObjectClass *oc,void *data) +{ +UserCreatableClass *ucc =USER_CREATABLE_CLASS (oc); +QAuthZClass *authz =QAUTHZ_CLASS (oc); + + ucc->complete = qauthz_list_file_complete; + +object_class_property_add_str (oc,"filename" , + qauthz_list_file_prop_get_filename, + qauthz_list_file_prop_set_filename, +NULL ); +object_class_property_add_bool (oc,"refresh" , + qauthz_list_file_prop_get_refresh, + qauthz_list_file_prop_set_refresh, +NULL ); + + authz->is_allowed = qauthz_list_file_is_allowed; +} + + +static void +qauthz_list_file_init (Object *obj) +{ +QAuthZListFile *authz =QAUTHZ_LIST_FILE (obj); + + authz->file_watch =-1 ; +#ifdef CONFIG_INOTIFY1 + authz->refresh = TRUE; +#endif +} + + +QAuthZListFile *qauthz_list_file_new (const char *id, +const char *filename, +Error **errp) +{ +return QAUTHZ_LIST_FILE ( +object_new_with_props (TYPE_QAUTHZ_LIST_FILE , +object_get_objects_root (), + id, errp, +"filename" , filename, +NULL )); +} + + +static const TypeInfo qauthz_list_file_info = { + .parent =TYPE_QAUTHZ_LIST , + .name =TYPE_QAUTHZ_LIST_FILE , + .instance_init = qauthz_list_file_init, + .instance_size =sizeof (QAuthZListFile), + .instance_finalize = qauthz_list_file_finalize, + .class_size =sizeof (QAuthZListFileClass), + .class_init = qauthz_list_file_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_USER_CREATABLE }, + { } + } +}; + + +static void +qauthz_list_file_register_types (void ) +{ +type_register_static (&qauthz_list_file_info); +} + + +type_init (qauthz_list_file_register_types);authz/trace-events +4
-0@@ -9,3 +9,7 @@ qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *goti # auth/list.c qauthz_list_check_rule(void *authz, const char *identity, const char *rule, int format, int policy) "AuthZ list %p check rule=%s identity=%s format=%d policy=%d" qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ list %p default identity=%s policy=%d" + +# auth/listfile.c +qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load filename=%s" +qauthz_list_file_refresh(void *authz, const char *filename, int success) "AuthZ file %p load filename=%s success=%d"include/authz/listfile.h new file +110
-0@@ -0,0 +1,110 @@ +/* +* QEMU list file authorization driver +* +* Copyright (c) 2018 Red Hat, Inc. +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see <http://www.gnu.org/licenses/>. +* +*/ + +#ifndef QAUTHZ_LIST_FILE_H__ +#define QAUTHZ_LIST_FILE_H__ + +#include "authz/list.h" +#include "qapi/qapi-types-authz.h" +#include "qemu/filemonitor.h" + +#define TYPE_QAUTHZ_LIST_FILE "authz-list-file" + +#define QAUTHZ_LIST_FILE_CLASS (klass) \ + OBJECT_CLASS_CHECK(QAuthZListFileClass, (klass), \ + TYPE_QAUTHZ_LIST_FILE) +#define QAUTHZ_LIST_FILE_GET_CLASS (obj) \ + OBJECT_GET_CLASS(QAuthZListFileClass, (obj), \ + TYPE_QAUTHZ_LIST_FILE) +#define QAUTHZ_LIST_FILE (obj) \ + INTERFACE_CHECK(QAuthZListFile, (obj), \ + TYPE_QAUTHZ_LIST_FILE) + +typedef struct QAuthZListFile QAuthZListFile ; +typedef struct QAuthZListFileClass QAuthZListFileClass ; + + +/** +* QAuthZListFile: +* +* This authorization driver provides a file mechanism +* for granting access by matching user names against a +* file of globs. Each match rule has an associated policy +* and a catch all policy applies if no rule matches +* +* To create an instance of this class via QMP: +* +* { +* "execute": "object-add", +* "arguments": { +* "qom-type": "authz-list-file", +* "id": "authz0", +* "parameters": { +* "filename": "/etc/qemu/myvm-vnc.acl", +* "refresh": "yes" +* } +* } +* } +* +* If 'refresh' is 'yes', inotify is used to monitor for changes +* to the file and auto-reload the rules. +* +* The myvm-vnc.acl file should contain the parameters for +* the QAuthZList object in JSON format: +* +* { +* "rules": [ +* { "match": "fred", "policy": "allow", "format": "exact" }, +* { "match": "bob", "policy": "allow", "format": "exact" }, +* { "match": "danb", "policy": "deny", "format": "exact" }, +* { "match": "dan*", "policy": "allow", "format": "glob" } +* ], +* "policy": "deny" +* } +* +* The object can be created on the command line using +* +* -object authz-list-file,id=authz0,\ +* filename=/etc/qemu/myvm-vnc.acl,refresh=yes +* +*/ +struct QAuthZListFile { +QAuthZ parent_obj; + +QAuthZ *list; +char *filename; +bool refresh; +QFileMonitor *file_monitor; +int file_watch; +}; + + +struct QAuthZListFileClass { +QAuthZClass parent_class; +}; + + +QAuthZListFile *qauthz_list_file_new (const char *id, +const char *filename, +Error **errp); + + +#endif /* QAUTHZ_LIST_FILE_H__ */ +qemu-options.hx +47
-0@@ -4413,6 +4413,53 @@ would look like: @end example + +@item -object authz-listfile,id=@var{id},filename=@var{path},refresh=@var{yes|no} + +Create an authorization object that will control access to network services. + +The @option{filename} parameter is the fully qualified path to a file +containing the access control list rules in JSON format. + +An example set of rules that match against SASL usernames might look +like: + +@example + @{ + "rules": [ + @{ "match": "fred", "policy": "allow", "format": "exact" @}, + @{ "match": "bob", "policy": "allow", "format": "exact" @}, + @{ "match": "danb", "policy": "deny", "format": "glob" @}, + @{ "match": "dan*", "policy": "allow", "format": "exact" @}, + ], + "policy": "deny" + @} +@end example + +When checking access the object will iterate over all the rules and +the first rule to match will have its @option{policy} value returned +as the result. If no rules match, then the default @option{policy} +value is returned. + +The rules can either be an exact string match, or they can use the +simple UNIX glob pattern matching to allow wildcards to be used. + +If @option{refresh} is set to true the file will be monitored +and automatically reloaded whenever its content changes. + +As with the @code{authz-simple} object, the format of the identity +strings being matched depends on the network service, but is usually +a TLS x509 distinguished name, or a SASL username. + +An example authorization object to validate a SASL username +would look like: +@example + # $QEMU \ + ... + -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes + ... +@end example + @end table ETEXISignature · 1 line
2.17.0
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Re: [Qemu-devel] [PATCH v3 09/11] authz: add QAuthZListFile object type for a file access control list
Quoted 21 lines · Dr. David Alan Gilbert
Quoted 20 lines · * Daniel P. Berrangé ([email protected]) wrote:
Add a QAuthZListFile object type that implements the QAuthZ interface. This built-in implementation is a proxy around the QAtuhZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes.
To create an instance of this object via the QMP monitor, the syntax used would be:
{ "execute": "object-add", "arguments": { "qom-type": "authz-list-file", "id": "authz0", "parameters": { "filename": "/etc/qemu/vnc.acl", "refresh": "yes" } } }
Quoted 8 lines
Quoted 4 lines
If "refresh" is "yes", inotify is used to monitor the file, automatically reloading changes. If an error occurs during reloading, all authorizations will fail until the file is next successfully loaded.
I'm curious about the 'refresh' stuff:
a) If refresh=no is there a way to explicitly ask for a refresh when some tool knows it's finished with fiddling with the file.
If refresh=no, then you can still use object_del + object_add to recreate the ACL object which will cause new content to be picked up.
Quoted 4 lines
b) am I right in thinking you're actually monitoring the directory for changes and retriggering on directory changes? So it'll trigger on the normal trick of renaming the modified file over the original?
I originally made the mistake of trying to monitor the file and discovered the awfulness of inotify :-(
So, yeah, now we monitor the directory so we can trigger reloads even when the file is editted by doing a tmpfile+rename dance.
The inotify support in the early patch in this series is intelligent so that if multiple objects all monitor the same directory we only use a single inotify watch.
Quoted 2 lines
c) I'm a little concerned about making it automatic; if all the qemus on a system all wake up and reparse the file at the same time.
I don't think its a big deal in this case because the files in question are very small. Once one QEMU reads it, the kernel will have content in I/O cache, and the CPU overhead of parsing the JSON will be lost in the noise given likely file sizes IMHO.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Re: [Qemu-devel] [PATCH v3 09/11] authz: add QAuthZListFile object type for a file access control list
Quoted 27 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 26 lines · Dr. David Alan Gilbert
Quoted 24 lines · * Daniel P. Berrangé ([email protected]) wrote:
Add a QAuthZListFile object type that implements the QAuthZ interface. This built-in implementation is a proxy around the QAtuhZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes.
To create an instance of this object via the QMP monitor, the syntax used would be:
{ "execute": "object-add", "arguments": { "qom-type": "authz-list-file", "id": "authz0", "parameters": { "filename": "/etc/qemu/vnc.acl", "refresh": "yes" } } }If "refresh" is "yes", inotify is used to monitor the file, automatically reloading changes. If an error occurs during reloading, all authorizations will fail until the file is next successfully loaded.
Quoted 7 lines
Quoted 3 lines
I'm curious about the 'refresh' stuff:
a) If refresh=no is there a way to explicitly ask for a refresh when some tool knows it's finished with fiddling with the file.If refresh=no, then you can still use
object_del+object_addto recreate the ACL object which will cause new content to be picked up.
But if I have a VNC/NBD/etc listening, won't it be bound to the old object, so I can't delete the old object?
Quoted 16 lines
Quoted 4 lines
b) am I right in thinking you're actually monitoring the directory for changes and retriggering on directory changes? So it'll trigger on the normal trick of renaming the modified file over the original?
I originally made the mistake of trying to monitor the file and discovered the awfulness of inotify :-(
So, yeah, now we monitor the directory so we can trigger reloads even when the file is editted by doing a tmpfile+rename dance.
The inotify support in the early patch in this series is intelligent so that if multiple objects all monitor the same directory we only use a single inotify watch.
Quoted 7 lines
Quoted 2 lines
c) I'm a little concerned about making it automatic; if all the qemus on a system all wake up and reparse the file at the same time.
I don't think its a big deal in this case because the files in question are very small. Once one QEMU reads it, the kernel will have content in I/O cache, and the CPU overhead of parsing the JSON will be lost in the noise given likely file sizes IMHO.
OK.
Dave
Quoted 6 lines
Regards,
DanielSignature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Re: [Qemu-devel] [PATCH v3 09/11] authz: add QAuthZListFile object type for a file access control list
Quoted 32 lines · Dr. David Alan Gilbert
Quoted 31 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 29 lines · Dr. David Alan Gilbert
Quoted 20 lines · * Daniel P. Berrangé ([email protected]) wrote:
Add a QAuthZListFile object type that implements the QAuthZ interface. This built-in implementation is a proxy around the QAtuhZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes.
To create an instance of this object via the QMP monitor, the syntax used would be:
{ "execute": "object-add", "arguments": { "qom-type": "authz-list-file", "id": "authz0", "parameters": { "filename": "/etc/qemu/vnc.acl", "refresh": "yes" } } }Quoted 4 lines
If "refresh" is "yes", inotify is used to monitor the file, automatically reloading changes. If an error occurs during reloading, all authorizations will fail until the file is next successfully loaded.
I'm curious about the 'refresh' stuff:
a) If refresh=no is there a way to explicitly ask for a refresh when some tool knows it's finished with fiddling with the file.
Quoted 6 lines
Quoted 3 lines
If refresh=no, then you can still use
object_del+object_addto recreate the ACL object which will cause new content to be picked up.But if I have a VNC/NBD/etc listening, won't it be bound to the old object, so I can't delete the old object?
That's ok actually - the network servers merely record the ID of the authz object. They resolve that to an actual object instance at the time they do the authorization check, and failsafe to DENY if it is missing. So you can safely delete & recreate on the fly.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Re: [Qemu-devel] [PATCH v3 09/11] authz: add QAuthZListFile object type for a file access control list
Quoted 37 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 36 lines · Dr. David Alan Gilbert
Quoted 34 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 21 lines · Dr. David Alan Gilbert
Quoted 20 lines · * Daniel P. Berrangé ([email protected]) wrote:
Add a QAuthZListFile object type that implements the QAuthZ interface. This built-in implementation is a proxy around the QAtuhZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes.
To create an instance of this object via the QMP monitor, the syntax used would be:
{ "execute": "object-add", "arguments": { "qom-type": "authz-list-file", "id": "authz0", "parameters": { "filename": "/etc/qemu/vnc.acl", "refresh": "yes" } } }Quoted 8 lines
Quoted 4 lines
If "refresh" is "yes", inotify is used to monitor the file, automatically reloading changes. If an error occurs during reloading, all authorizations will fail until the file is next successfully loaded.
I'm curious about the 'refresh' stuff:
a) If refresh=no is there a way to explicitly ask for a refresh when some tool knows it's finished with fiddling with the file.If refresh=no, then you can still use
object_del+object_addto recreate the ACL object which will cause new content to be picked up.
Quoted 7 lines
Quoted 2 lines
But if I have a VNC/NBD/etc listening, won't it be bound to the old object, so I can't delete the old object?
That's ok actually - the network servers merely record the ID of the authz object. They resolve that to an actual object instance at the time they do the authorization check, and failsafe to DENY if it is missing. So you can safely delete & recreate on the fly.
OK, that needs documenting; binding it at the time of parsing wouldn't be surprising to anyone except for that use.
Dave
Quoted 6 lines
Regards,
DanielSignature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Re: [Qemu-devel] [PATCH v3 09/11] authz: add QAuthZListFile object type for a file access control list
Quoted 41 lines · Dr. David Alan Gilbert
Quoted 40 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 38 lines · Dr. David Alan Gilbert
Quoted 27 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 26 lines · Dr. David Alan Gilbert
Quoted 24 lines · * Daniel P. Berrangé ([email protected]) wrote:
Add a QAuthZListFile object type that implements the QAuthZ interface. This built-in implementation is a proxy around the QAtuhZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes.
To create an instance of this object via the QMP monitor, the syntax used would be:
{ "execute": "object-add", "arguments": { "qom-type": "authz-list-file", "id": "authz0", "parameters": { "filename": "/etc/qemu/vnc.acl", "refresh": "yes" } } }If "refresh" is "yes", inotify is used to monitor the file, automatically reloading changes. If an error occurs during reloading, all authorizations will fail until the file is next successfully loaded.
Quoted 7 lines
Quoted 3 lines
I'm curious about the 'refresh' stuff:
a) If refresh=no is there a way to explicitly ask for a refresh when some tool knows it's finished with fiddling with the file.If refresh=no, then you can still use
object_del+object_addto recreate the ACL object which will cause new content to be picked up.But if I have a VNC/NBD/etc listening, won't it be bound to the old object, so I can't delete the old object?
Quoted 7 lines
Quoted 4 lines
That's ok actually - the network servers merely record the ID of the authz object. They resolve that to an actual object instance at the time they do the authorization check, and failsafe to DENY if it is missing. So you can safely delete & recreate on the fly.
OK, that needs documenting; binding it at the time of parsing wouldn't be surprising to anyone except for that use.
I'll document that explicitly against each network service that I wire this functionality up to, in the second dependent patch series.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|