regulator: bd71837: Staticize ldo_2_volts
PATCH 1/2 regulator: bd71837: Staticize ldo_2_volts
--- drivers/regulator/bd71837-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/bd71837-regulator.c +1 -1
@@ -195,7 +195,7 @@ static const struct regulator_linear_range bd71837_ldo1_voltage_ranges[] = {* LDO2 * 0.8 or 0.9V */ -const unsigned int ldo_2_volts[] = { +static const unsigned int ldo_2_volts[] = {900000 ,800000 };
Signature · 1 line
2.14.1
PATCH 2/2 regulator: bd71837: Simplify bd71837_set_voltage_sel_restricted implementation
--- drivers/regulator/bd71837-regulator.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
drivers/regulator/bd71837-regulator.c +4 -8
@@ -73,14 +73,10 @@ static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev,static int bd71837_set_voltage_sel_restricted (struct regulator_dev *rdev,unsigned int sel) { -int ret; - - ret =regulator_is_enabled_regmap (rdev); -if (!ret) - ret =regulator_set_voltage_sel_regmap (rdev, sel); -else if (ret ==1 ) - ret = -EBUSY ; -return ret; +if (regulator_is_enabled_regmap (rdev)) +return -EBUSY ; + +return regulator_set_voltage_sel_regmap (rdev, sel); }static struct regulator_ops bd71837_ldo_regulator_ops = {
Signature · 1 line
2.14.1
Mark Brown
maintainerApplied "regulator: bd71837: Simplify bd71837_set_voltage_sel_restricted implementation" to the regulator tree
The patch
regulator: bd71837: Simplify bd71837_set_voltage_sel_restricted implementation
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From ffdc4984100050d0c8e2f11f76a15ca36f5d9e37 Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Wed, 27 Jun 2018 20:40:14 +0800
Subject: [PATCH] regulator: bd71837: Simplify
bd71837_set_voltage_sel_restricted implementation
--- drivers/regulator/bd71837-regulator.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
drivers/regulator/bd71837-regulator.c +4 -8
@@ -73,14 +73,10 @@ static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev,static int bd71837_set_voltage_sel_restricted (struct regulator_dev *rdev,unsigned int sel) { -int ret; - - ret =regulator_is_enabled_regmap (rdev); -if (!ret) - ret =regulator_set_voltage_sel_regmap (rdev, sel); -else if (ret ==1 ) - ret = -EBUSY ; -return ret; +if (regulator_is_enabled_regmap (rdev)) +return -EBUSY ; + +return regulator_set_voltage_sel_regmap (rdev, sel); }static struct regulator_ops bd71837_ldo_regulator_ops = {
Signature · 1 line
2.18.0.rc2
Mark Brown
maintainerApplied "regulator: bd71837: Staticize ldo_2_volts" to the regulator tree
In reply to Axel LinThe patch
regulator: bd71837: Staticize ldo_2_volts
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From adb78a8e24bbfe19df0d4dd19ee78cec351a5f04 Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Wed, 27 Jun 2018 20:40:13 +0800
Subject: [PATCH] regulator: bd71837: Staticize ldo_2_volts
--- drivers/regulator/bd71837-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/bd71837-regulator.c +1 -1
@@ -195,7 +195,7 @@ static const struct regulator_linear_range bd71837_ldo1_voltage_ranges[] = {* LDO2 * 0.8 or 0.9V */ -const unsigned int ldo_2_volts[] = { +static const unsigned int ldo_2_volts[] = {900000 ,800000 };
Signature · 1 line
2.18.0.rc2