staging:rtl8192u: rename HT_CHANNEL_WIDTH -> enum ht_channel_width
PATCH 1/12 staging:rtl8192u: rename HT_CHANNEL_WIDTH -> enum ht_channel_width
remove the typedef HT_CHANNEL_WIDTH and replace with 'enum ht_channel_width'
--- drivers/staging/rtl8192u/ieee80211/ieee80211.h | 4 ++-- drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c | 4 ++-- drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h | 4 ++-- drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 6 +++--- drivers/staging/rtl8192u/r8190_rtl8256.c | 2 +- drivers/staging/rtl8192u/r8190_rtl8256.h | 2 +- drivers/staging/rtl8192u/r8192U.h | 2 +- drivers/staging/rtl8192u/r819xU_phy.c | 2 +- drivers/staging/rtl8192u/r819xU_phy.h | 3 ++- 9 files changed, 15 insertions(+), 14 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211.h +2 -2
@@ -2002,7 +2002,7 @@ struct ieee80211_device {short (*check_nic_enough_desc)(struct net_device *dev,int queue_index);//added by wb for HT related // void (*SwChnlByTimerHandler)(struct net_device *dev, int channel); -void (*SetBWModeHandler)(struct net_device *dev,HT_CHANNEL_WIDTH Bandwidth,HT_EXTCHNL_OFFSET Offset); +void (*SetBWModeHandler)(struct net_device *dev,enum ht_channel_width Bandwidth,HT_EXTCHNL_OFFSET Offset);// void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate); bool (*GetNmodeSupportBySecCfg)(struct net_device *dev);void (*SetWirelessMode)(struct net_device *dev,u8 wireless_mode);
@@ -2358,7 +2358,7 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString);void HTDebugHTInfo (u8 *InfoIE,u8 *TitleString);void HTSetConnectBwMode (struct ieee80211_device *ieee, -HT_CHANNEL_WIDTH Bandwidth,HT_EXTCHNL_OFFSET Offset); +enum ht_channel_width Bandwidth,HT_EXTCHNL_OFFSET Offset);void HTUpdateDefaultSetting (struct ieee80211_device *ieee);void HTConstructCapabilityElement (struct ieee80211_device *ieee,u8 *posHTCap,u8 *len,u8 isEncrypt);
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c +2 -2
@@ -303,7 +303,7 @@ void ieee80211_wx_sync_scan_wq(struct work_struct *work) struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, wx_sync_scan_wq);short chan;HT_EXTCHNL_OFFSET chan_offset =0 ; -HT_CHANNEL_WIDTH bandwidth =0 ; +enum ht_channel_width bandwidth =0 ;int b40M =0 ; chan = ieee->current_network.channel;
@@ -320,7 +320,7 @@ void ieee80211_wx_sync_scan_wq(struct work_struct *work)if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT && ieee->pHTInfo->bCurBW40MHz) { b40M =1 ; chan_offset = ieee->pHTInfo->CurSTAExtChnlOffset; - bandwidth = (HT_CHANNEL_WIDTH )ieee->pHTInfo->bCurBW40MHz; + bandwidth = (enum ht_channel_width )ieee->pHTInfo->bCurBW40MHz;printk ("Scan in 40M, force to 20M first:%d, %d\n" , chan_offset, bandwidth); ieee->SetBWModeHandler (ieee->dev,HT_CHANNEL_WIDTH_20 ,HT_EXTCHNL_OFFSET_NO_EXT ); }
drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h +2 -2
@@ -27,10 +27,10 @@// // Represent Channel Width in HT Capabilities // -typedef enum _HT_CHANNEL_WIDTH { +enum ht_channel_width {HT_CHANNEL_WIDTH_20 =0 ,HT_CHANNEL_WIDTH_20_40 =1 , -}HT_CHANNEL_WIDTH , *PHT_CHANNEL_WIDTH ; +};// // Represent Extension Channel Offset in HT Capabilities
drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c +3 -3
@@ -894,7 +894,7 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,return true; } -void HTSetConnectBwMode (struct ieee80211_device *ieee,HT_CHANNEL_WIDTH Bandwidth,HT_EXTCHNL_OFFSET Offset); +void HTSetConnectBwMode (struct ieee80211_device *ieee,enum ht_channel_width Bandwidth,HT_EXTCHNL_OFFSET Offset);void HTOnAssocRsp (struct ieee80211_device *ieee) {PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -936,7 +936,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTInfo, sizeof(HT_INFORMATION_ELE)); // Config Supported Channel Width setting // -HTSetConnectBwMode (ieee, (HT_CHANNEL_WIDTH )(pPeerHTCap->ChlWidth), (HT_EXTCHNL_OFFSET )(pPeerHTInfo->ExtChlOffset)); +HTSetConnectBwMode (ieee, (enum ht_channel_width )(pPeerHTCap->ChlWidth), (HT_EXTCHNL_OFFSET )(pPeerHTInfo->ExtChlOffset)); pHTInfo->bCurTxBW40MHz = (pPeerHTInfo->RecommemdedTxWidth ==1 );
@@ -1290,7 +1290,7 @@ u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame)/* * This function set bandwidth mode in protocol layer. */ -void HTSetConnectBwMode (struct ieee80211_device *ieee,HT_CHANNEL_WIDTH Bandwidth,HT_EXTCHNL_OFFSET Offset) +void HTSetConnectBwMode (struct ieee80211_device *ieee,enum ht_channel_width Bandwidth,HT_EXTCHNL_OFFSET Offset) {PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;// u32 flags = 0;
drivers/staging/rtl8192u/r8190_rtl8256.c +1 -1
@@ -23,7 +23,7 @@* Note: 8226 support both 20M and 40 MHz *-------------------------------------------------------------------------- */ -void PHY_SetRF8256Bandwidth (struct net_device *dev,HT_CHANNEL_WIDTH Bandwidth) +void PHY_SetRF8256Bandwidth (struct net_device *dev,enum ht_channel_width Bandwidth) {u8 eRFPath;struct r8192_priv *priv =ieee80211_priv (dev);
drivers/staging/rtl8192u/r8190_rtl8256.h +1 -1
@@ -14,7 +14,7 @@#define RTL8225H #define RTL819X_TOTAL_RF_PATH 2/* for 8192U */ -void PHY_SetRF8256Bandwidth (struct net_device *dev,HT_CHANNEL_WIDTH Bandwidth); +void PHY_SetRF8256Bandwidth (struct net_device *dev,enum ht_channel_width Bandwidth);void PHY_RF8256_Config (struct net_device *dev);void phy_RF8256_Config_ParaFile (struct net_device *dev);void PHY_SetRF8256CCKTxPower (struct net_device *dev,u8 powerlevel);
drivers/staging/rtl8192u/r8192U.h +1 -1
@@ -995,7 +995,7 @@ typedef struct r8192_priv {u8 SwChnlStage;u8 SwChnlStep;u8 SetBWModeInProgress; -HT_CHANNEL_WIDTH CurrentChannelBW; +enum ht_channel_width CurrentChannelBW;u8 ChannelPlan;/* 8190 40MHz mode */ /* Control channel sub-carrier */
drivers/staging/rtl8192u/r819xU_phy.c +1 -1
@@ -1663,7 +1663,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)* notice: I doubt whether SetBWModeInProgress flag is necessary as we can * test whether current work in the queue or not.//do I? *****************************************************************************/ -void rtl8192_SetBWMode (struct net_device *dev,HT_CHANNEL_WIDTH bandwidth, +void rtl8192_SetBWMode (struct net_device *dev,enum ht_channel_width bandwidth,HT_EXTCHNL_OFFSET offset) {struct r8192_priv *priv =ieee80211_priv (dev);
drivers/staging/rtl8192u/r819xU_phy.h +2 -1
@@ -79,7 +79,8 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, RF90_RADIO_PATH_E eRFPath);u8 rtl8192_phy_SwChnl (struct net_device *dev,u8 channel); -void rtl8192_SetBWMode (struct net_device *dev,HT_CHANNEL_WIDTH bandwidth, +void rtl8192_SetBWMode (struct net_device *dev, +enum ht_channel_width bandwidth,HT_EXTCHNL_OFFSET offset);void rtl8192_SwChnl_WorkItem (struct net_device *dev);void rtl8192_SetBWModeWorkItem (struct net_device *dev);
Signature · 1 line
2.18.0
PATCH 2/12 staging:rtl8192u: Add space required before '(' - Style
Simple addition of the coding style required space before '('.
--- .../rtl8192u/ieee80211/ieee80211_softmac.c | 174 +++++++++--------- 1 file changed, 86 insertions(+), 88 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +86 -88
@@ -109,7 +109,7 @@ static void ieee80211_WMM_Info(struct ieee80211_device *ieee, u8 **tag_p) *tag++ =0x00 ; *tag++ =0x01 ;#ifdef SUPPORT_USPD -if (ieee->current_network.wmm_info &0x80 ) { +if (ieee->current_network.wmm_info &0x80 ) { *tag++ =0x0f |MAX_SP_Len; }else { *tag++ = MAX_SP_Len;
@@ -163,7 +163,7 @@ static struct sk_buff *dequeue_mgmt(struct ieee80211_device *ieee) {struct sk_buff *ret; -if (ieee->mgmt_queue_tail == ieee->mgmt_queue_head) +if (ieee->mgmt_queue_tail == ieee->mgmt_queue_head)return NULL ; ret = ieee->mgmt_queue_ring[ieee->mgmt_queue_tail];
@@ -185,16 +185,16 @@ static u8 MgntQuery_MgntFrameTxRate(struct ieee80211_device *ieee)u8 rate;/* 2008/01/25 MH For broadcom, MGNT frame set as OFDM 6M. */ -if (pHTInfo->IOTAction &HT_IOT_ACT_MGNT_USE_CCK_6M ) +if (pHTInfo->IOTAction &HT_IOT_ACT_MGNT_USE_CCK_6M ) rate =0x0c ;else rate = ieee->basic_rate &0x7f ;if (rate ==0 ) {/* 2005.01.26, by rcnjko. */ -if (ieee->mode ==IEEE_A || - ieee->mode ==IEEE_N_5G || - (ieee->mode ==IEEE_N_24G &&!pHTInfo->bCurSuppCCK)) +if (ieee->mode ==IEEE_A || + ieee->mode ==IEEE_N_5G || + (ieee->mode ==IEEE_N_24G &&!pHTInfo->bCurSuppCCK)) rate =0x0c ;else rate =0x02 ;
@@ -235,8 +235,8 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee tcb_desc->bTxDisableRateFallBack =1 ; tcb_desc->bTxUseDriverAssingedRate =1 ; -if (single){ -if (ieee->queue_stop){ +if (single){ +if (ieee->queue_stop){enqueue_mgmt (ieee, skb); }else { header->seq_ctl =cpu_to_le16 (ieee->seq_ctrl[0 ]<<4 );
@@ -265,9 +265,9 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee ieee->seq_ctrl[0 ]++;/* check whether the managed packet queued greater than 5 */ -if (!ieee->check_nic_enough_desc (ieee->dev, tcb_desc->queue_index) ||\ - (skb_queue_len (&ieee->skb_waitQ[tcb_desc->queue_index]) !=0 ) ||\ - (ieee->queue_stop) ) { +if (!ieee->check_nic_enough_desc (ieee->dev, tcb_desc->queue_index) ||\ + (skb_queue_len (&ieee->skb_waitQ[tcb_desc->queue_index]) !=0 ) || \ + (ieee->queue_stop) ) {/* insert the skb packet to the management queue */ /* as for the completion function, it does not need * to check it any more.
@@ -289,7 +289,7 @@ softmac_ps_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee)struct rtl_80211_hdr_3addr *header = (struct rtl_80211_hdr_3addr *)skb->data; -if (single){ +if (single){ header->seq_ctl =cpu_to_le16 (ieee->seq_ctrl[0 ] <<4 );if (ieee->seq_ctrl[0 ] ==0xFFF )
@@ -358,7 +358,7 @@ static void ieee80211_send_beacon(struct ieee80211_device *ieee) {struct sk_buff *skb; -if (!ieee->ieee_up) +if (!ieee->ieee_up)return ;//unsigned long flags; skb =ieee80211_get_beacon_ (ieee);
@@ -423,13 +423,13 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)memcpy (channel_map,GET_DOT11D_INFO (ieee)->channel_map,MAX_CHANNEL_NUMBER +1 );mutex_lock (&ieee->scan_mutex); -while (1 ) +while (1 ) {do { ch++;if (ch >MAX_CHANNEL_NUMBER ) goto out;/* scan completed */ - }while (!channel_map[ch]); + }while (!channel_map[ch]);/* this function can be called in two situations * 1- We have switched to ad-hoc mode and we are
@@ -453,7 +453,7 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)if (ieee->state ==IEEE80211_LINKED ) goto out; ieee->set_chan (ieee->dev, ch); -if (channel_map[ch] ==1 ) +if (channel_map[ch] ==1 )ieee80211_send_probe_requests (ieee);/* this prevent excessive time wait when we
@@ -465,13 +465,13 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)msleep_interruptible (IEEE80211_SOFTMAC_SCAN_TIME ); } out: -if (ieee->state <IEEE80211_LINKED ){ +if (ieee->state <IEEE80211_LINKED ){ ieee->actscanning = false;mutex_unlock (&ieee->scan_mutex); }else { ieee->sync_scan_hurryup =0 ; -if (IS_DOT11D_ENABLE (ieee)) +if (IS_DOT11D_ENABLE (ieee))DOT11D_ScanComplete (ieee);mutex_unlock (&ieee->scan_mutex); }
@@ -486,7 +486,7 @@ static void ieee80211_softmac_scan_wq(struct work_struct *work)u8 channel_map[MAX_CHANNEL_NUMBER +1 ];memcpy (channel_map,GET_DOT11D_INFO (ieee)->channel_map,MAX_CHANNEL_NUMBER +1 ); -if (!ieee->ieee_up) +if (!ieee->ieee_up)return ;mutex_lock (&ieee->scan_mutex); do{
@@ -500,11 +500,11 @@ static void ieee80211_softmac_scan_wq(struct work_struct *work) goto out;/* no good chans */ } } - }while (!channel_map[ieee->current_network.channel]); + }while (!channel_map[ieee->current_network.channel]);if (ieee->scanning ==0 ) goto out; ieee->set_chan (ieee->dev, ieee->current_network.channel); -if (channel_map[ieee->current_network.channel] ==1 ) +if (channel_map[ieee->current_network.channel] ==1 )ieee80211_send_probe_requests (ieee);schedule_delayed_work (&ieee->softmac_scan_wq,IEEE80211_SOFTMAC_SCAN_TIME );
@@ -512,7 +512,7 @@ static void ieee80211_softmac_scan_wq(struct work_struct *work)mutex_unlock (&ieee->scan_mutex);return ; out: -if (IS_DOT11D_ENABLE (ieee)) +if (IS_DOT11D_ENABLE (ieee))DOT11D_ScanComplete (ieee); ieee->actscanning = false; watchdog =0 ;
@@ -545,7 +545,7 @@ static void ieee80211_beacons_stop(struct ieee80211_device *ieee)void ieee80211_stop_send_beacons (struct ieee80211_device *ieee) { -if (ieee->stop_send_beacons) +if (ieee->stop_send_beacons) ieee->stop_send_beacons (ieee->dev);if (ieee->softmac_features &IEEE_SOFTMAC_BEACONS )ieee80211_beacons_stop (ieee);
@@ -554,9 +554,9 @@ EXPORT_SYMBOL(ieee80211_stop_send_beacons);void ieee80211_start_send_beacons (struct ieee80211_device *ieee) { -if (ieee->start_send_beacons) +if (ieee->start_send_beacons) ieee->start_send_beacons (ieee->dev, ieee->basic_rate); -if (ieee->softmac_features &IEEE_SOFTMAC_BEACONS ) +if (ieee->softmac_features &IEEE_SOFTMAC_BEACONS )ieee80211_beacons_start (ieee); }EXPORT_SYMBOL (ieee80211_start_send_beacons);
@@ -653,11 +653,11 @@ ieee80211_authentication_req(struct ieee80211_network *beacon,memcpy (auth->header.addr3, beacon->bssid,ETH_ALEN );//auth->algorithm = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY; -if (ieee->auth_mode ==0 ) +if (ieee->auth_mode ==0 ) auth->algorithm =WLAN_AUTH_OPEN ; -else if (ieee->auth_mode ==1 ) +else if (ieee->auth_mode ==1 ) auth->algorithm =cpu_to_le16 (WLAN_AUTH_SHARED_KEY ); -else if (ieee->auth_mode ==2 ) +else if (ieee->auth_mode ==2 ) auth->algorithm =WLAN_AUTH_OPEN ;/* 0x80; */ printk ("=================>%s():auth->algorithm is %d\n" , __func__, auth->algorithm); auth->transaction =cpu_to_le16 (ieee->associate_seq);
@@ -693,14 +693,14 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *du8 *tmp_generic_ie_buf =NULL ;u8 tmp_generic_ie_len =0 ; -if (rate_ex_len >0 ) rate_ex_len+=2 ; +if (rate_ex_len >0 ) rate_ex_len+=2 ; -if (ieee->current_network.capability &WLAN_CAPABILITY_IBSS ) +if (ieee->current_network.capability &WLAN_CAPABILITY_IBSS ) atim_len =4 ;else atim_len =0 ; -if (ieee80211_is_54g (&ieee->current_network)) +if (ieee80211_is_54g (&ieee->current_network)) erp_len =3 ;else erp_len =0 ;
@@ -754,7 +754,7 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d beacon_buf->capability |=cpu_to_le16 (ieee->current_network.capability &WLAN_CAPABILITY_SHORT_PREAMBLE );/* add short preamble here */ -if (ieee->short_slot && (ieee->current_network.capability &WLAN_CAPABILITY_SHORT_SLOT )) +if (ieee->short_slot && (ieee->current_network.capability &WLAN_CAPABILITY_SHORT_SLOT )) beacon_buf->capability |=cpu_to_le16 (WLAN_CAPABILITY_SHORT_SLOT ); crypt = ieee->crypt[ieee->tx_keyidx];
@@ -844,7 +844,7 @@ static struct sk_buff *ieee80211_assoc_resp(struct ieee80211_device *ieee, assoc->capability =cpu_to_le16 (ieee->iw_mode ==IW_MODE_MASTER ?WLAN_CAPABILITY_BSS :WLAN_CAPABILITY_IBSS ); -if (ieee->short_slot) +if (ieee->short_slot) assoc->capability |=cpu_to_le16 (WLAN_CAPABILITY_SHORT_SLOT );if (ieee->host_encrypt)
@@ -1059,7 +1059,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,if (beacon->capability &WLAN_CAPABILITY_SHORT_PREAMBLE ) hdr->capability |=cpu_to_le16 (WLAN_CAPABILITY_SHORT_PREAMBLE );//add short_preamble here -if (ieee->short_slot) +if (ieee->short_slot) hdr->capability |=cpu_to_le16 (WLAN_CAPABILITY_SHORT_SLOT );if (wmm_info_len)//QOS hdr->capability |=cpu_to_le16 (WLAN_CAPABILITY_QOS );
@@ -1156,7 +1156,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,#endif if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) { -if (ieee->pHTInfo->ePeerHTSpecVer ==HT_SPEC_VER_EWC ) +if (ieee->pHTInfo->ePeerHTSpecVer ==HT_SPEC_VER_EWC ) { tag =skb_put (skb, ht_cap_len); *tag++ =MFIE_TYPE_GENERIC ;
@@ -1293,9 +1293,8 @@ static void ieee80211_associate_complete_wq(struct work_struct *work) { struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, associate_complete_wq);printk (KERN_INFO "Associated successfully\n" ); -if (ieee80211_is_54g (&ieee->current_network) && - (ieee->modulation &IEEE80211_OFDM_MODULATION )){ - +if (ieee80211_is_54g (&ieee->current_network) && + (ieee->modulation &IEEE80211_OFDM_MODULATION )){ ieee->rate =108 ;printk (KERN_INFO "Using G rates:%d\n" , ieee->rate); }else {
@@ -1432,7 +1431,7 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee/* Join the network for the first time */ ieee->AsocRetryCount =0 ;//for HT by amy 080514 -if ((ieee->current_network.qos_data.supported ==1 ) && +if ((ieee->current_network.qos_data.supported ==1 ) &&// (ieee->pHTInfo->bEnableHT && ieee->current_network.bssht.bdSupportHT)) ieee->current_network.bssht.bdSupportHT)/*WB, 2008.09.09:bCurrentHTSupport and bEnableHT two flags are going to put together to check whether we are in HT now, so needn't to check bEnableHT flags here. That's is to say we will set to HT support whenever joined AP has the ability to support HT. And whether we are in HT or not, please check bCurrentHTSupport&&bEnableHT now please.*/
@@ -1448,8 +1447,8 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee ieee->state =IEEE80211_ASSOCIATING ;schedule_work (&ieee->associate_procedure_wq); }else { -if (ieee80211_is_54g (&ieee->current_network) && - (ieee->modulation &IEEE80211_OFDM_MODULATION )){ +if (ieee80211_is_54g (&ieee->current_network) && + (ieee->modulation &IEEE80211_OFDM_MODULATION )){ ieee->rate =108 ; ieee->SetWirelessMode (ieee->dev,IEEE_G );printk (KERN_INFO "Using G rates\n" );
@@ -1600,14 +1599,14 @@ static inline u16 assoc_parse(struct ieee80211_device *ieee, struct sk_buff *skb *aid =le16_to_cpu (response_head->aid) &0x3fff ; status_code =le16_to_cpu (response_head->status); -if ((status_code ==WLAN_STATUS_ASSOC_DENIED_RATES || \ - status_code ==WLAN_STATUS_CAPS_UNSUPPORTED )&& - ((ieee->mode ==IEEE_G ) && - (ieee->current_network.mode ==IEEE_N_24G ) && - (ieee->AsocRetryCount++ < (RT_ASOC_RETRY_LIMIT -1 )))) { - ieee->pHTInfo->IOTAction |=HT_IOT_ACT_PURE_N_MODE ; +if ((status_code ==WLAN_STATUS_ASSOC_DENIED_RATES || \ + status_code ==WLAN_STATUS_CAPS_UNSUPPORTED )&& + ((ieee->mode ==IEEE_G ) && + (ieee->current_network.mode ==IEEE_N_24G ) && + (ieee->AsocRetryCount++ < (RT_ASOC_RETRY_LIMIT -1 )))) { + ieee->pHTInfo->IOTAction |=HT_IOT_ACT_PURE_N_MODE ; }else { - ieee->AsocRetryCount =0 ; + ieee->AsocRetryCount =0 ; }return le16_to_cpu (response_head->status);
@@ -1682,24 +1681,24 @@ static short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h,return 0; */ dtim = ieee->current_network.dtim_data; -if (!(dtim &IEEE80211_DTIM_VALID )) +if (!(dtim &IEEE80211_DTIM_VALID ))return 0 ; timeout = ieee->current_network.beacon_interval;//should we use ps_timeout value or beacon_interval ieee->current_network.dtim_data =IEEE80211_DTIM_INVALID ; -if (dtim & ((IEEE80211_DTIM_UCAST |IEEE80211_DTIM_MBCAST )& ieee->ps)) +if (dtim & ((IEEE80211_DTIM_UCAST |IEEE80211_DTIM_MBCAST )& ieee->ps))return 2 ; -if (!time_after (jiffies, -dev_trans_start (ieee->dev) +msecs_to_jiffies (timeout))) +if (!time_after (jiffies, +dev_trans_start (ieee->dev) +msecs_to_jiffies (timeout)))return 0 ; -if (!time_after (jiffies, - ieee->last_rx_ps_time +msecs_to_jiffies (timeout))) +if (!time_after (jiffies, + ieee->last_rx_ps_time +msecs_to_jiffies (timeout)))return 0 ; -if ((ieee->softmac_features &IEEE_SOFTMAC_SINGLE_QUEUE ) && - (ieee->mgmt_queue_tail != ieee->mgmt_queue_head)) +if ((ieee->softmac_features &IEEE_SOFTMAC_SINGLE_QUEUE ) && + (ieee->mgmt_queue_tail != ieee->mgmt_queue_head))return 0 ;if (time_l) {
@@ -1710,7 +1709,7 @@ static short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h,if (time_h) { *time_h = ieee->current_network.last_dtim_sta_time[1 ]; -if (time_l && *time_l < ieee->current_network.last_dtim_sta_time[0 ]) +if (time_l && *time_l < ieee->current_network.last_dtim_sta_time[0 ]) *time_h +=1 ; }
@@ -1740,18 +1739,18 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee) sleep =ieee80211_sta_ps_sleep (ieee, &th, &tl);/* 2 wake, 1 sleep, 0 do nothing */ -if (sleep ==0 ) +if (sleep ==0 ) goto out; -if (sleep ==1 ){ -if (ieee->sta_sleep ==1 ) +if (sleep ==1 ){ +if (ieee->sta_sleep ==1 ) ieee->enter_sleep_state (ieee->dev, th, tl); -else if (ieee->sta_sleep ==0 ){ +else if (ieee->sta_sleep ==0 ){// printk("send null 1\n"); spin_lock_irqsave (&ieee->mgmt_tx_lock, flags2); -if (ieee->ps_is_queue_empty (ieee->dev)){ +if (ieee->ps_is_queue_empty (ieee->dev)){ ieee->sta_sleep =2 ; ieee->ps_request_tx_ack (ieee->dev);
@@ -1763,7 +1762,7 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee) }spin_unlock_irqrestore (&ieee->mgmt_tx_lock, flags2); } - }else if (sleep ==2 ){ + }else if (sleep ==2 ){//#warning CHECK_LOCK_HERE spin_lock_irqsave (&ieee->mgmt_tx_lock, flags2);
@@ -1786,7 +1785,7 @@ void ieee80211_sta_wakeup(struct ieee80211_device *ieee, short nl)return ; } -if (ieee->sta_sleep ==1 ) +if (ieee->sta_sleep ==1 ) ieee->sta_wake_up (ieee->dev); ieee->sta_sleep =0 ;
@@ -1803,7 +1802,7 @@ void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success)spin_lock_irqsave (&ieee->lock, flags); -if (ieee->sta_sleep ==2 ){ +if (ieee->sta_sleep ==2 ){/* Null frame with PS bit set */ if (success) { ieee->sta_sleep =1 ;
@@ -1924,17 +1923,16 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,struct ieee80211_assoc_response_frame *assoc_resp;// struct ieee80211_info_element *info_element; -if (!ieee->proto_started) +if (!ieee->proto_started)return 0 ; -if (ieee->sta_sleep || (ieee->ps !=IEEE80211_PS_DISABLED && - ieee->iw_mode ==IW_MODE_INFRA && - ieee->state ==IEEE80211_LINKED )) - +if (ieee->sta_sleep || (ieee->ps !=IEEE80211_PS_DISABLED && + ieee->iw_mode ==IW_MODE_INFRA && + ieee->state ==IEEE80211_LINKED ))tasklet_schedule (&ieee->ps_task); -if (WLAN_FC_GET_STYPE (header->frame_ctl) !=IEEE80211_STYPE_PROBE_RESP && -WLAN_FC_GET_STYPE (header->frame_ctl) !=IEEE80211_STYPE_BEACON ) +if (WLAN_FC_GET_STYPE (header->frame_ctl) !=IEEE80211_STYPE_PROBE_RESP && +WLAN_FC_GET_STYPE (header->frame_ctl) !=IEEE80211_STYPE_BEACON ) ieee->last_rx_ps_time = jiffies;switch (WLAN_FC_GET_STYPE (header->frame_ctl)) {
@@ -1981,7 +1979,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,IEEE80211_DEBUG_MGMT ("Association response status code 0x%x\n" , errcode); -if (ieee->AsocRetryCount <RT_ASOC_RETRY_LIMIT ) { +if (ieee->AsocRetryCount <RT_ASOC_RETRY_LIMIT ) {schedule_work (&ieee->associate_procedure_wq); }else {ieee80211_associate_abort (ieee);
@@ -2087,7 +2085,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device * ieee->stats.multicast++; }/* if xmit available, just xmit it immediately, else just insert it to the wait queue */ -for (i =0 ; i < txb->nr_frags; i++) { +for (i =0 ; i < txb->nr_frags; i++) {#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE if ((skb_queue_len(&ieee->skb_drv_aggQ[queue_index]) != 0) ||#else
@@ -2127,7 +2125,7 @@ EXPORT_SYMBOL(ieee80211_softmac_xmit);static void ieee80211_resume_tx (struct ieee80211_device *ieee) {int i; -for (i = ieee->tx_pending.frag; i < ieee->tx_pending.txb->nr_frags; i++) { +for (i = ieee->tx_pending.frag; i < ieee->tx_pending.txb->nr_frags; i++) {if (ieee->queue_stop){ ieee->tx_pending.frag = i;
@@ -2301,10 +2299,10 @@ static void ieee80211_start_ibss_wq(struct work_struct *work)/* the network definitively is not here.. create a new cell */ if (ieee->state ==IEEE80211_NOLINK ) {printk ("creating new IBSS cell\n" ); -if (!ieee->wap_set) +if (!ieee->wap_set)eth_random_addr (ieee->current_network.bssid); -if (ieee->modulation &IEEE80211_CCK_MODULATION ){ +if (ieee->modulation &IEEE80211_CCK_MODULATION ){ ieee->current_network.rates_len =4 ;
@@ -2315,7 +2313,7 @@ static void ieee80211_start_ibss_wq(struct work_struct *work) }else ieee->current_network.rates_len =0 ; -if (ieee->modulation &IEEE80211_OFDM_MODULATION ){ +if (ieee->modulation &IEEE80211_OFDM_MODULATION ){ ieee->current_network.rates_ex_len =8 ; ieee->current_network.rates_ex[0 ] =IEEE80211_BASIC_RATE_MASK |IEEE80211_OFDM_RATE_6MB ;
@@ -2338,7 +2336,7 @@ static void ieee80211_start_ibss_wq(struct work_struct *work) ieee->SetWirelessMode (ieee->dev,IEEE_G ); ieee->current_network.atim_window =0 ; ieee->current_network.capability =WLAN_CAPABILITY_IBSS ; -if (ieee->short_slot) +if (ieee->short_slot) ieee->current_network.capability |=WLAN_CAPABILITY_SHORT_SLOT ; }
@@ -2411,7 +2409,7 @@ void ieee80211_disassociate(struct ieee80211_device *ieee)if (ieee->data_hard_stop) ieee->data_hard_stop (ieee->dev); -if (IS_DOT11D_ENABLE (ieee)) +if (IS_DOT11D_ENABLE (ieee))Dot11d_Reset (ieee); ieee->state =IEEE80211_NOLINK ; ieee->is_set_key = false;
@@ -2428,10 +2426,10 @@ static void ieee80211_associate_retry_wq(struct work_struct *work)unsigned long flags;mutex_lock (&ieee->wx_mutex); -if (!ieee->proto_started) +if (!ieee->proto_started) goto exit; -if (ieee->state !=IEEE80211_ASSOCIATING_RETRY ) +if (ieee->state !=IEEE80211_ASSOCIATING_RETRY ) goto exit;/* until we do not set the state to IEEE80211_NOLINK
@@ -2453,7 +2451,7 @@ static void ieee80211_associate_retry_wq(struct work_struct *work)spin_lock_irqsave (&ieee->lock, flags); -if (ieee->state ==IEEE80211_NOLINK ) +if (ieee->state ==IEEE80211_NOLINK )ieee80211_start_scan (ieee);spin_unlock_irqrestore (&ieee->lock, flags);
@@ -2486,7 +2484,7 @@ struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee)struct ieee80211_probe_response *b; skb =ieee80211_get_beacon_ (ieee); -if (!skb) +if (!skb)return NULL ; b = (struct ieee80211_probe_response *)skb->data;
@@ -2551,7 +2549,7 @@ void ieee80211_start_protocol(struct ieee80211_device *ieee) ch++;if (ch >MAX_CHANNEL_NUMBER )return ;/* no channel found */ - }while (!GET_DOT11D_INFO (ieee)->channel_map[ch]); + }while (!GET_DOT11D_INFO (ieee)->channel_map[ch]); ieee->current_network.channel = ch; }
@@ -2560,7 +2558,7 @@ void ieee80211_start_protocol(struct ieee80211_device *ieee)// printk("===>%s(), chan:%d\n", __func__, ieee->current_network.channel); // ieee->set_chan(ieee->dev,ieee->current_network.channel); -for (i =0 ; i <17 ; i++) { +for (i =0 ; i <17 ; i++) { ieee->last_rxseq_num[i] =-1 ; ieee->last_rxfrag_num[i] =-1 ; ieee->last_packet_time[i] =0 ;
@@ -2582,7 +2580,7 @@ void ieee80211_start_protocol(struct ieee80211_device *ieee)else if (ieee->iw_mode ==IW_MODE_MASTER )ieee80211_start_master_bss (ieee); -else if (ieee->iw_mode ==IW_MODE_MONITOR ) +else if (ieee->iw_mode ==IW_MODE_MONITOR )ieee80211_start_monitor_mode (ieee); }
@@ -2594,7 +2592,7 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee) ieee->state =IEEE80211_NOLINK ; ieee->sync_scan_hurryup =0 ; -for (i =0 ; i <5 ; i++) { +for (i =0 ; i <5 ; i++) { ieee->seq_ctrl[i] =0 ; } ieee->pDot11dInfo =kzalloc (sizeof (RT_DOT11D_INFO ),GFP_KERNEL );
Signature · 1 line
2.18.0
PATCH 3/12 staging:rtl8192u: Remove blank lines before '}' and after '{' characters
In reply to John WhitmoreCoding style change to simply remove the unrequired spaces before a closing brace or before an opening brace.
--- .../rtl8192u/ieee80211/ieee80211_softmac.c | 44 ++++++------------- 1 file changed, 13 insertions(+), 31 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +13 -31
@@ -77,8 +77,7 @@ static void ieee80211_MFIE_Grate(struct ieee80211_device *ieee, u8 **tag_p) {u8 *tag = *tag_p; -if (ieee->modulation &IEEE80211_OFDM_MODULATION ) { - +if (ieee->modulation &IEEE80211_OFDM_MODULATION ) { *tag++ =MFIE_TYPE_RATES_EX ; *tag++ =8 ; *tag++ =IEEE80211_BASIC_RATE_MASK |IEEE80211_OFDM_RATE_6MB ;
@@ -89,7 +88,6 @@ static void ieee80211_MFIE_Grate(struct ieee80211_device *ieee, u8 **tag_p) *tag++ =IEEE80211_BASIC_RATE_MASK |IEEE80211_OFDM_RATE_36MB ; *tag++ =IEEE80211_BASIC_RATE_MASK |IEEE80211_OFDM_RATE_48MB ; *tag++ =IEEE80211_BASIC_RATE_MASK |IEEE80211_OFDM_RATE_54MB ; - }/* We may add an option for custom rates that specific HW might support */
@@ -301,7 +299,6 @@ softmac_ps_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee)netif_trans_update (ieee->dev); ieee->softmac_data_hard_start_xmit (skb, ieee->dev, ieee->basic_rate); }else { - header->seq_ctl =cpu_to_le16 (ieee->seq_ctrl[0 ] <<4 );if (ieee->seq_ctrl[0 ] ==0xFFF )
@@ -1473,7 +1470,6 @@ void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee)spin_lock_irqsave (&ieee->lock, flags);list_for_each_entry (target, &ieee->network_list, list) { -/* if the state become different that NOLINK means * we had found what we are searching for */
@@ -1572,8 +1568,7 @@ static int assoc_rq_parse(struct sk_buff *skb, u8 *dest)struct ieee80211_assoc_request_frame *a;if (skb->len < (sizeof (struct ieee80211_assoc_request_frame ) - -sizeof (struct ieee80211_info_element ))) { - +sizeof (struct ieee80211_info_element ))) {IEEE80211_DEBUG_MGMT ("invalid len in auth request:%d \n" , skb->len);return -1 ; }
@@ -1640,7 +1635,6 @@ ieee80211_rx_auth_rq(struct ieee80211_device *ieee, struct sk_buff *skb)ieee80211_resp_to_auth (ieee, status, dest); }//DMESG("Dest is "MACSTR, MAC2STR(dest)); - } static inline void
@@ -1665,7 +1659,6 @@ static void ieee80211_sta_ps_send_null_frame(struct ieee80211_device *ieee,if (buf)softmac_ps_mgmt_xmit (buf, ieee); - }/* EXPORT_SYMBOL(ieee80211_sta_ps_send_null_frame); */
@@ -1726,10 +1719,9 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee)spin_lock_irqsave (&ieee->lock, flags);if ((ieee->ps ==IEEE80211_PS_DISABLED || - ieee->iw_mode !=IW_MODE_INFRA || - ieee->state !=IEEE80211_LINKED )){ - -// #warning CHECK_LOCK_HERE + ieee->iw_mode !=IW_MODE_INFRA || + ieee->state !=IEEE80211_LINKED )){ +// #warning CHECK_LOCK_HERE spin_lock_irqsave (&ieee->mgmt_tx_lock, flags2);ieee80211_sta_wakeup (ieee,1 );
@@ -1999,8 +1991,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,case IEEE80211_STYPE_AUTH :if (ieee->softmac_features &IEEE_SOFTMAC_ASSOCIATE ) {if (ieee->state ==IEEE80211_ASSOCIATING_AUTHENTICATING - && ieee->iw_mode ==IW_MODE_INFRA ) { - + && ieee->iw_mode ==IW_MODE_INFRA ) {IEEE80211_DEBUG_MGMT ("Received auth response" );ieee80211_check_auth_response (ieee, skb); }else if (ieee->iw_mode ==IW_MODE_MASTER ) {
@@ -2011,9 +2002,9 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,case IEEE80211_STYPE_PROBE_REQ :if ((ieee->softmac_features &IEEE_SOFTMAC_PROBERS ) && - ((ieee->iw_mode ==IW_MODE_ADHOC || - ieee->iw_mode ==IW_MODE_MASTER ) && - ieee->state ==IEEE80211_LINKED )){ + ((ieee->iw_mode ==IW_MODE_ADHOC || + ieee->iw_mode ==IW_MODE_MASTER ) && + ieee->state ==IEEE80211_LINKED )){ieee80211_rx_probe_rq (ieee, skb); }break ;
@@ -2024,9 +2015,8 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,* both for disassociation and deauthentication */ if ((ieee->softmac_features &IEEE_SOFTMAC_ASSOCIATE ) && - ieee->state ==IEEE80211_LINKED && - ieee->iw_mode ==IW_MODE_INFRA ){ - + ieee->state ==IEEE80211_LINKED && + ieee->iw_mode ==IW_MODE_INFRA ){ ieee->state =IEEE80211_ASSOCIATING ; ieee->softmac_stats.reassoc++;
@@ -2117,7 +2107,6 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *//exit: spin_unlock_irqrestore (&ieee->lock, flags); - }EXPORT_SYMBOL (ieee80211_softmac_xmit);
@@ -2126,12 +2115,10 @@ static void ieee80211_resume_tx(struct ieee80211_device *ieee) {int i;for (i = ieee->tx_pending.frag; i < ieee->tx_pending.txb->nr_frags; i++) { -if (ieee->queue_stop){ ieee->tx_pending.frag = i;return ; }else { - ieee->softmac_data_hard_start_xmit ( ieee->tx_pending.txb->fragments[i], ieee->dev, ieee->rate);
@@ -2172,8 +2159,7 @@ void ieee80211_wake_queue(struct ieee80211_device *ieee) ieee->queue_stop =0 ;if (ieee->softmac_features &IEEE_SOFTMAC_SINGLE_QUEUE ) { -while (!ieee->queue_stop && (skb =dequeue_mgmt (ieee))){ - +while (!ieee->queue_stop && (skb =dequeue_mgmt (ieee))) { header = (struct rtl_80211_hdr_3addr *)skb->data; header->seq_ctl =cpu_to_le16 (ieee->seq_ctrl[0 ] <<4 );
@@ -2243,7 +2229,6 @@ void ieee80211_start_master_bss(struct ieee80211_device *ieee)static void ieee80211_start_monitor_mode (struct ieee80211_device *ieee) {if (ieee->raw_tx) { -if (ieee->data_hard_resume) ieee->data_hard_resume (ieee->dev);
@@ -2302,8 +2287,7 @@ static void ieee80211_start_ibss_wq(struct work_struct *work)if (!ieee->wap_set)eth_random_addr (ieee->current_network.bssid); -if (ieee->modulation &IEEE80211_CCK_MODULATION ){ - +if (ieee->modulation &IEEE80211_CCK_MODULATION ) { ieee->current_network.rates_len =4 ; ieee->current_network.rates[0 ] =IEEE80211_BASIC_RATE_MASK |IEEE80211_CCK_RATE_1MB ;
@@ -2338,7 +2322,6 @@ static void ieee80211_start_ibss_wq(struct work_struct *work) ieee->current_network.capability =WLAN_CAPABILITY_IBSS ;if (ieee->short_slot) ieee->current_network.capability |=WLAN_CAPABILITY_SHORT_SLOT ; - } ieee->state =IEEE80211_LINKED ;
@@ -3054,7 +3037,6 @@ int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct iw_poin }switch (param->cmd) { -case IEEE_CMD_SET_WPA_PARAM : ret =ieee80211_wpa_set_param (ieee, param->u.wpa_param.name, param->u.wpa_param.value);
Signature · 1 line
2.18.0
Greg KH
maintainerRe: [PATCH 03/12] staging:rtl8192u: Remove blank lines before '}' and after '{' characters
Quoted 2 lines · John Whitmore
Coding style change to simply remove the unrequired spaces before a closing brace or before an opening brace.
That would be good, but that's not what this patch does :(
It removes lines, not spaces, as the subject line said. You also fix up an indentation as well.
thanks,
greg k-h
Re: [PATCH 03/12] staging:rtl8192u: Remove blank lines before '}' and after '{' characters
Quoted 4 lines · Greg KH
Quoted 2 lines · John Whitmore
Coding style change to simply remove the unrequired spaces before a closing brace or before an opening brace.
Quoted 8 lines
That would be good, but that's not what this patch does :(
It removes lines, not spaces, as the subject line said. You also fix up an indentation as well.
thanks,
greg k-h
Oops sorry. I'll fix it up in another pass.
Re: [PATCH 03/12] staging:rtl8192u: Remove blank lines before '}' and after '{' characters
In reply to Greg KHQuoted 4 lines · Greg KH
Quoted 2 lines · John Whitmore
Coding style change to simply remove the unrequired spaces before a closing brace or before an opening brace.
Quoted 8 lines
That would be good, but that's not what this patch does :(
It removes lines, not spaces, as the subject line said. You also fix up an indentation as well.
thanks,
greg k-h
Just for clarification, before I assume something and make a mistake, I'm wondering about this patch set. I got auto notification to say that patches 1, 2, 4, & 6 had been accepted and merged with staging-next. And I got this email to explain why patch number 3 wasn't up to scratch.
But that leaves 5, 7, 8, 9, 10, 11 & 12. I'm assuming that they didn't apply and I that I can resubmit them with a fixed up patch number 3. That seems logical to me so I'll work on that basis for the moment. Thought I'd better check, before I confuse people, with an erroneous assumption.
John Whitmore
Greg KH
maintainerRe: [PATCH 03/12] staging:rtl8192u: Remove blank lines before '}' and after '{' characters
Quoted 19 lines · John Whitmore
Quoted 4 lines · Greg KH
Quoted 2 lines · John Whitmore
Coding style change to simply remove the unrequired spaces before a closing brace or before an opening brace.
Quoted 8 lines
That would be good, but that's not what this patch does :(
It removes lines, not spaces, as the subject line said. You also fix up an indentation as well.
thanks,
greg k-h
Just for clarification, before I assume something and make a mistake, I'm wondering about this patch set. I got auto notification to say that patches 1, 2, 4, & 6 had been accepted and merged with staging-next. And I got this email to explain why patch number 3 wasn't up to scratch.
Quoted 4 lines
But that leaves 5, 7, 8, 9, 10, 11 & 12. I'm assuming that they didn't apply and I that I can resubmit them with a fixed up patch number 3. That seems logical to me so I'll work on that basis for the moment. Thought I'd better check, before I confuse people, with an erroneous assumption.
Yes, that is correct.
thanks,
greg k-h
PATCH 4/12 staging:rtl8192u: Add spaces required around operators - Coding Style
In reply to John WhitmoreAdded the spaces, required by coding style, around the various operators.
--- .../rtl8192u/ieee80211/ieee80211_softmac.c | 124 +++++++++--------- 1 file changed, 62 insertions(+), 62 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +62 -62
@@ -108,7 +108,7 @@ static void ieee80211_WMM_Info(struct ieee80211_device *ieee, u8 **tag_p) *tag++ =0x01 ;#ifdef SUPPORT_USPD if (ieee->current_network.wmm_info &0x80 ) { - *tag++ =0x0f |MAX_SP_Len; + *tag++ =0x0f | MAX_SP_Len; }else { *tag++ = MAX_SP_Len; }
@@ -142,7 +142,7 @@ static void enqueue_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb) {int nh; - nh = (ieee->mgmt_queue_head +1 ) %MGMT_QUEUE_NUM ; + nh = (ieee->mgmt_queue_head +1 ) %MGMT_QUEUE_NUM ;/* * if the queue is full but we have newer frames then
@@ -167,7 +167,7 @@ static struct sk_buff *dequeue_mgmt(struct ieee80211_device *ieee) ret = ieee->mgmt_queue_ring[ieee->mgmt_queue_tail]; ieee->mgmt_queue_tail = - (ieee->mgmt_queue_tail+1 ) %MGMT_QUEUE_NUM ; + (ieee->mgmt_queue_tail +1 ) %MGMT_QUEUE_NUM ;return ret; }
@@ -192,7 +192,7 @@ static u8 MgntQuery_MgntFrameTxRate(struct ieee80211_device *ieee)/* 2005.01.26, by rcnjko. */ if (ieee->mode ==IEEE_A || ieee->mode ==IEEE_N_5G || - (ieee->mode ==IEEE_N_24G &&!pHTInfo->bCurSuppCCK)) + (ieee->mode ==IEEE_N_24G && !pHTInfo->bCurSuppCCK)) rate =0x0c ;else rate =0x02 ;
@@ -237,7 +237,7 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieeeif (ieee->queue_stop){enqueue_mgmt (ieee, skb); }else { - header->seq_ctl =cpu_to_le16 (ieee->seq_ctrl[0 ]<<4 ); + header->seq_ctl =cpu_to_le16 (ieee->seq_ctrl[0 ] <<4 );if (ieee->seq_ctrl[0 ] ==0xFFF ) ieee->seq_ctrl[0 ] =0 ;
@@ -373,7 +373,7 @@ static void ieee80211_send_beacon(struct ieee80211_device *ieee)// if(!timer_pending(&ieee->beacon_timer)) // add_timer(&ieee->beacon_timer); mod_timer (&ieee->beacon_timer, - jiffies +msecs_to_jiffies (ieee->current_network.beacon_interval-5 )); + jiffies +msecs_to_jiffies (ieee->current_network.beacon_interval -5 )); }//spin_unlock_irqrestore(&ieee->beacon_lock,flags); }
@@ -415,9 +415,9 @@ static void ieee80211_send_probe_requests(struct ieee80211_device *ieee)void ieee80211_softmac_scan_syncro (struct ieee80211_device *ieee) {short ch =0 ; -u8 channel_map[MAX_CHANNEL_NUMBER +1 ]; +u8 channel_map[MAX_CHANNEL_NUMBER +1 ]; -memcpy (channel_map,GET_DOT11D_INFO (ieee)->channel_map,MAX_CHANNEL_NUMBER +1 ); +memcpy (channel_map,GET_DOT11D_INFO (ieee)->channel_map,MAX_CHANNEL_NUMBER +1 );mutex_lock (&ieee->scan_mutex);while (1 )
@@ -480,9 +480,9 @@ static void ieee80211_softmac_scan_wq(struct work_struct *work)struct delayed_work *dwork =to_delayed_work (work); struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, softmac_scan_wq);static short watchdog; -u8 channel_map[MAX_CHANNEL_NUMBER +1 ]; +u8 channel_map[MAX_CHANNEL_NUMBER +1 ]; -memcpy (channel_map,GET_DOT11D_INFO (ieee)->channel_map,MAX_CHANNEL_NUMBER +1 ); +memcpy (channel_map,GET_DOT11D_INFO (ieee)->channel_map,MAX_CHANNEL_NUMBER +1 );if (!ieee->ieee_up)return ;mutex_lock (&ieee->scan_mutex);
@@ -677,7 +677,7 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *dchar *ssid = ieee->current_network.ssid;int ssid_len = ieee->current_network.ssid_len; -int rate_len = ieee->current_network.rates_len+2 ; +int rate_len = ieee->current_network.rates_len +2 ;int rate_ex_len = ieee->current_network.rates_ex_len;int wpa_ie_len = ieee->wpa_ie_len;u8 erpinfo_content =0 ;
@@ -690,7 +690,7 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *du8 *tmp_generic_ie_buf =NULL ;u8 tmp_generic_ie_len =0 ; -if (rate_ex_len >0 ) rate_ex_len+=2 ; +if (rate_ex_len >0 ) rate_ex_len +=2 ;if (ieee->current_network.capability &WLAN_CAPABILITY_IBSS ) atim_len =4 ;
@@ -721,19 +721,19 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *dHTConstructRT2RTAggElement (ieee, tmp_generic_ie_buf, &tmp_generic_ie_len); }// printk("===============>tmp_ht_cap_len is %d,tmp_ht_info_len is %d, tmp_generic_ie_len is %d\n",tmp_ht_cap_len,tmp_ht_info_len,tmp_generic_ie_len); - beacon_size =sizeof (struct ieee80211_probe_response )+2 + - ssid_len - +3 //channel - +rate_len - +rate_ex_len - +atim_len - +erp_len - +wpa_ie_len -// +tmp_ht_cap_len -// +tmp_ht_info_len -// +tmp_generic_ie_len -// +wmm_len+2 - +ieee->tx_headroom; + beacon_size =sizeof (struct ieee80211_probe_response ) +2 + + ssid_len + +3 //channel + + rate_len + + rate_ex_len + + atim_len + + erp_len + + wpa_ie_len +// + tmp_ht_cap_len +// + tmp_ht_info_len +// + tmp_generic_ie_len +// + wmm_len+2 + + ieee->tx_headroom; skb =dev_alloc_skb (beacon_size);if (!skb)return NULL ;
@@ -769,9 +769,9 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d tag += ssid_len; *(tag++) =MFIE_TYPE_RATES ; - *(tag++) = rate_len-2 ; -memcpy (tag, ieee->current_network.rates, rate_len-2 ); - tag+=rate_len-2 ; + *(tag++) = rate_len -2 ; +memcpy (tag, ieee->current_network.rates, rate_len -2 ); + tag += rate_len -2 ; *(tag++) =MFIE_TYPE_DS_SET ; *(tag++) =1 ;
@@ -783,7 +783,7 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *dput_unaligned_le16 (ieee->current_network.atim_window, tag); - tag+=2 ; + tag +=2 ; }if (erp_len) {
@@ -793,9 +793,9 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d }if (rate_ex_len) { *(tag++) =MFIE_TYPE_RATES_EX ; - *(tag++) = rate_ex_len-2 ; -memcpy (tag, ieee->current_network.rates_ex, rate_ex_len-2 ); - tag+=rate_ex_len-2 ; + *(tag++) = rate_ex_len -2 ; +memcpy (tag, ieee->current_network.rates_ex, rate_ex_len -2 ); + tag += rate_ex_len -2 ; }if (wpa_ie_len)
@@ -871,7 +871,7 @@ static struct sk_buff *ieee80211_auth_resp(struct ieee80211_device *ieee, {struct sk_buff *skb;struct ieee80211_authentication *auth; -int len = ieee->tx_headroom +sizeof (struct ieee80211_authentication )+1 ; +int len = ieee->tx_headroom +sizeof (struct ieee80211_authentication ) +1 ; skb =dev_alloc_skb (len);
@@ -912,7 +912,7 @@ static struct sk_buff *ieee80211_null_func(struct ieee80211_device *ieee, hdr->frame_ctl =cpu_to_le16 (IEEE80211_FTYPE_DATA |IEEE80211_STYPE_NULLFUNC |IEEE80211_FCTL_TODS | - (pwr ?IEEE80211_FCTL_PM :0 )); + (pwr ?IEEE80211_FCTL_PM :0 ));return skb; }
@@ -968,9 +968,9 @@ ieee80211_association_req(struct ieee80211_network *beacon,int encrypt;unsigned int rate_len =ieee80211_MFIE_rate_len (ieee); -unsigned int wmm_info_len = beacon->qos_data.supported?9 :0 ; +unsigned int wmm_info_len = beacon->qos_data.supported ?9 :0 ;#ifdef THOMAS_TURBO -unsigned int turbo_info_len = beacon->Turbo_Enable?9 :0 ; +unsigned int turbo_info_len = beacon->Turbo_Enable ?9 :0 ;#endif int len =0 ;
@@ -979,7 +979,7 @@ ieee80211_association_req(struct ieee80211_network *beacon, encrypt = ieee->host_encrypt && crypt && crypt->ops && ((0 ==strcmp (crypt->ops->name,"WEP" ) || wpa_ie_len));/* Include High Throuput capability && Realtek proprietary */ -if (ieee->pHTInfo->bCurrentHTSupport&&ieee->pHTInfo->bEnableHT) +if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) { ht_cap_buf = (u8 *)&(ieee->pHTInfo->SelfHTCap); ht_cap_len =sizeof (ieee->pHTInfo->SelfHTCap);
@@ -992,22 +992,22 @@ ieee80211_association_req(struct ieee80211_network *beacon, } }if (ieee->qos_support) { - wmm_info_len = beacon->qos_data.supported?9 :0 ; + wmm_info_len = beacon->qos_data.supported ?9 :0 ; }if (beacon->bCkipSupported) { - ckip_ie_len =30 +2 ; + ckip_ie_len =30 +2 ; }if (beacon->bCcxRmEnable) { - ccxrm_ie_len =6 +2 ; + ccxrm_ie_len =6 +2 ; }if (beacon->BssCcxVerNumber >=2 ) - cxvernum_ie_len =5 +2 ; + cxvernum_ie_len =5 +2 ;#ifdef THOMAS_TURBO - len =sizeof (struct ieee80211_assoc_request_frame )+2 + len =sizeof (struct ieee80211_assoc_request_frame ) +2 + beacon->ssid_len/* essid tagged val */ + rate_len/* rates tagged val */ + wpa_ie_len
@@ -1020,7 +1020,7 @@ ieee80211_association_req(struct ieee80211_network *beacon, + cxvernum_ie_len + ieee->tx_headroom;#else - len =sizeof (struct ieee80211_assoc_request_frame )+2 + len =sizeof (struct ieee80211_assoc_request_frame ) +2 + beacon->ssid_len/* essid tagged val */ + rate_len/* rates tagged val */ + wpa_ie_len
@@ -1090,7 +1090,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,// CCX1 spec V1.13, A01.1 CKIP Negotiation (page23): // "The CKIP negotiation is started with the associate request from the client to the access point, // containing an Aironet element with both the MIC and KP bits set." - osCcxAironetIE.Octet[IE_CISCO_FLAG_POSITION ] |= (SUPPORT_CKIP_PK |SUPPORT_CKIP_MIC ) ; + osCcxAironetIE.Octet[IE_CISCO_FLAG_POSITION ] |= (SUPPORT_CKIP_PK |SUPPORT_CKIP_MIC ) ; tag =skb_put (skb, ckip_ie_len); *tag++ =MFIE_TYPE_AIRONET ; *tag++ = osCcxAironetIE.Length;
@@ -1132,7 +1132,7 @@ ieee80211_association_req(struct ieee80211_network *beacon, *tag++ =MFIE_TYPE_HT_CAP ; *tag++ = ht_cap_len -2 ;memcpy (tag, ht_cap_buf, ht_cap_len -2 ); - tag += ht_cap_len -2 ; + tag += ht_cap_len -2 ; } }
@@ -1159,7 +1159,7 @@ ieee80211_association_req(struct ieee80211_network *beacon, *tag++ =MFIE_TYPE_GENERIC ; *tag++ = ht_cap_len -2 ;memcpy (tag, ht_cap_buf, ht_cap_len -2 ); - tag += ht_cap_len -2 ; + tag += ht_cap_len -2 ; }if (ieee->pHTInfo->bCurrentRT2RTAggregation) {
@@ -1247,11 +1247,11 @@ static void ieee80211_auth_challenge(struct ieee80211_device *ieee, ieee->associate_seq++; ieee->softmac_stats.tx_auth_rq++; - skb =ieee80211_authentication_req (beacon, ieee, chlen+2 ); + skb =ieee80211_authentication_req (beacon, ieee, chlen +2 );if (!skb)ieee80211_associate_abort (ieee);else { - c =skb_put (skb, chlen+2 ); + c =skb_put (skb, chlen +2 ); *(c++) =MFIE_TYPE_CHALLENGE ; *(c++) = chlen;memcpy (c, challenge, chlen);
@@ -1261,7 +1261,7 @@ static void ieee80211_auth_challenge(struct ieee80211_device *ieee,ieee80211_encrypt_fragment (ieee, skb,sizeof (struct rtl_80211_hdr_3addr ));softmac_mgmt_xmit (skb, ieee); -mod_timer (&ieee->associate_timer, jiffies + (HZ /2 )); +mod_timer (&ieee->associate_timer, jiffies + (HZ /2 ));//dev_kfree_skb_any(skb);//edit by thomas }kfree (challenge);
@@ -1282,7 +1282,7 @@ static void ieee80211_associate_step2(struct ieee80211_device *ieee)ieee80211_associate_abort (ieee); else{softmac_mgmt_xmit (skb, ieee); -mod_timer (&ieee->associate_timer, jiffies + (HZ /2 )); +mod_timer (&ieee->associate_timer, jiffies + (HZ /2 ));//dev_kfree_skb_any(skb);//edit by thomas } }
@@ -1298,7 +1298,7 @@ static void ieee80211_associate_complete_wq(struct work_struct *work) ieee->rate =22 ;printk (KERN_INFO "Using B rates:%d\n" , ieee->rate); } -if (ieee->pHTInfo->bCurrentHTSupport&&ieee->pHTInfo->bEnableHT) +if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) {printk ("Successfully associated, ht enabled\n" );HTOnAssocRsp (ieee);
@@ -1309,7 +1309,7 @@ static void ieee80211_associate_complete_wq(struct work_struct *work)memset (ieee->dot11HTOperationalRateSet,0 ,16 );//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT); } - ieee->LinkDetectInfo.SlotNum =2 * (1 + ieee->current_network.beacon_interval/500 ); + ieee->LinkDetectInfo.SlotNum =2 * (1 + ieee->current_network.beacon_interval /500 );// To prevent the immediately calling watch_dog after association. if (ieee->LinkDetectInfo.NumRecvBcnInPeriod ==0 || ieee->LinkDetectInfo.NumRecvDataInPeriod ==0 ) {
@@ -1363,7 +1363,7 @@ static void ieee80211_associate_procedure_wq(struct work_struct *work)inline void ieee80211_softmac_new_net (struct ieee80211_device *ieee,struct ieee80211_network *net) { -u8 tmp_ssid[IW_ESSID_MAX_SIZE +1 ]; +u8 tmp_ssid[IW_ESSID_MAX_SIZE +1 ];int tmp_ssid_len =0 ;short apset, ssidset, ssidbroad, apmatch, ssidmatch;
@@ -1389,8 +1389,8 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee ssidset = ieee->ssid_set;//ieee->current_network.ssid[0] != '\0'; ssidbroad = !(net->ssid_len ==0 || net->ssid[0 ] =='\0' ); apmatch = (memcmp (ieee->current_network.bssid, net->bssid,ETH_ALEN ) ==0 ); - ssidmatch = (ieee->current_network.ssid_len == net->ssid_len)&&\ - (!strncmp (ieee->current_network.ssid, net->ssid, net->ssid_len)); + ssidmatch = (ieee->current_network.ssid_len == net->ssid_len) && + (!strncmp (ieee->current_network.ssid, net->ssid, net->ssid_len)); if ( /* if the user set the AP check if match.* if the network does not broadcast essid we check the user supplyed ANY essid
@@ -1545,10 +1545,10 @@ static short probe_rq_parse(struct ieee80211_device *ieee, struct sk_buff *skb, tag = skb->data +sizeof (struct rtl_80211_hdr_3addr ); -while (tag+1 < skbend){ +while (tag +1 < skbend){if (*tag ==0 ) { - ssid = tag+2 ; - ssidlen = *(tag+1 ); + ssid = tag +2 ; + ssidlen = *(tag +1 );break ; } tag++;/* point to the len field */
@@ -1594,11 +1594,11 @@ static inline u16 assoc_parse(struct ieee80211_device *ieee, struct sk_buff *skb *aid =le16_to_cpu (response_head->aid) &0x3fff ; status_code =le16_to_cpu (response_head->status); -if ((status_code ==WLAN_STATUS_ASSOC_DENIED_RATES || \ - status_code ==WLAN_STATUS_CAPS_UNSUPPORTED )&& +if ((status_code ==WLAN_STATUS_ASSOC_DENIED_RATES || + status_code ==WLAN_STATUS_CAPS_UNSUPPORTED ) && ((ieee->mode ==IEEE_G ) && (ieee->current_network.mode ==IEEE_N_24G ) && - (ieee->AsocRetryCount++ < (RT_ASOC_RETRY_LIMIT -1 )))) { + (ieee->AsocRetryCount++ < (RT_ASOC_RETRY_LIMIT -1 )))) { ieee->pHTInfo->IOTAction |=HT_IOT_ACT_PURE_N_MODE ; }else { ieee->AsocRetryCount =0 ;
@@ -1679,7 +1679,7 @@ static short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h, timeout = ieee->current_network.beacon_interval;//should we use ps_timeout value or beacon_interval ieee->current_network.dtim_data =IEEE80211_DTIM_INVALID ; -if (dtim & ((IEEE80211_DTIM_UCAST |IEEE80211_DTIM_MBCAST )& ieee->ps)) +if (dtim & ((IEEE80211_DTIM_UCAST |IEEE80211_DTIM_MBCAST ) & ieee->ps))return 2 ; if (!time_after(jiffies,
Signature · 1 line
2.18.0
PATCH 5/12 staging:rtl8192u: Correct indentation and spacing for braces of code blocks
In reply to John WhitmoreSimple style change to fix the indentaiton and spacing of the braces around multi ling code blocks.
--- .../rtl8192u/ieee80211/ieee80211_softmac.c | 250 ++++++++---------- 1 file changed, 105 insertions(+), 145 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +105 -145
@@ -107,11 +107,10 @@ static void ieee80211_WMM_Info(struct ieee80211_device *ieee, u8 **tag_p) *tag++ =0x00 ; *tag++ =0x01 ;#ifdef SUPPORT_USPD -if (ieee->current_network.wmm_info &0x80 ) { +if (ieee->current_network.wmm_info &0x80 ) *tag++ =0x0f | MAX_SP_Len; - }else { +else *tag++ = MAX_SP_Len; - }#else *tag++ = MAX_SP_Len;#endif
@@ -200,8 +199,7 @@ static u8 MgntQuery_MgntFrameTxRate(struct ieee80211_device *ieee)/* // Data rate of ProbeReq is already decided. Annie, 2005-03-31 -if( pMgntInfo->bScanInProgress || (pMgntInfo->bDualModeScanStep!=0) ) -{ +if( pMgntInfo->bScanInProgress || (pMgntInfo->bDualModeScanStep!=0) ) { if(pMgntInfo->dot11CurrentWirelessMode==WIRELESS_MODE_A) rate = 0x0c; else
@@ -233,10 +231,10 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee tcb_desc->bTxDisableRateFallBack =1 ; tcb_desc->bTxUseDriverAssingedRate =1 ; -if (single){ -if (ieee->queue_stop){ +if (single) { +if (ieee->queue_stop) {enqueue_mgmt (ieee, skb); - }else { + }else { header->seq_ctl =cpu_to_le16 (ieee->seq_ctrl[0 ] <<4 );if (ieee->seq_ctrl[0 ] ==0xFFF )
@@ -251,7 +249,7 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee }spin_unlock_irqrestore (&ieee->lock, flags); - }else { + }else {spin_unlock_irqrestore (&ieee->lock, flags);spin_lock_irqsave (&ieee->mgmt_tx_lock, flags);
@@ -287,7 +285,7 @@ softmac_ps_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee)struct rtl_80211_hdr_3addr *header = (struct rtl_80211_hdr_3addr *)skb->data; -if (single){ +if (single) { header->seq_ctl =cpu_to_le16 (ieee->seq_ctrl[0 ] <<4 );if (ieee->seq_ctrl[0 ] ==0xFFF )
@@ -298,7 +296,7 @@ softmac_ps_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee)/* avoid watchdog triggers */ netif_trans_update (ieee->dev); ieee->softmac_data_hard_start_xmit (skb, ieee->dev, ieee->basic_rate); - }else { + }else { header->seq_ctl =cpu_to_le16 (ieee->seq_ctrl[0 ] <<4 );if (ieee->seq_ctrl[0 ] ==0xFFF )
@@ -420,13 +418,12 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)memcpy (channel_map,GET_DOT11D_INFO (ieee)->channel_map,MAX_CHANNEL_NUMBER +1 );mutex_lock (&ieee->scan_mutex); -while (1 ) - { -do { +while (1 ) { +do { ch++;if (ch >MAX_CHANNEL_NUMBER ) goto out;/* scan completed */ - }while (!channel_map[ch]); + }while (!channel_map[ch]);/* this function can be called in two situations * 1- We have switched to ad-hoc mode and we are
@@ -462,16 +459,15 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)msleep_interruptible (IEEE80211_SOFTMAC_SCAN_TIME ); } out: -if (ieee->state <IEEE80211_LINKED ){ +if (ieee->state <IEEE80211_LINKED ) { ieee->actscanning = false;mutex_unlock (&ieee->scan_mutex); + }else { + ieee->sync_scan_hurryup =0 ; +if (IS_DOT11D_ENABLE (ieee)) +DOT11D_ScanComplete (ieee); +mutex_unlock (&ieee->scan_mutex); } -else { - ieee->sync_scan_hurryup =0 ; -if (IS_DOT11D_ENABLE (ieee)) -DOT11D_ScanComplete (ieee); -mutex_unlock (&ieee->scan_mutex); -} }EXPORT_SYMBOL (ieee80211_softmac_scan_syncro);
@@ -486,18 +482,17 @@ static void ieee80211_softmac_scan_wq(struct work_struct *work)if (!ieee->ieee_up)return ;mutex_lock (&ieee->scan_mutex); -do { +do { ieee->current_network.channel = (ieee->current_network.channel +1 ) %MAX_CHANNEL_NUMBER ; -if (watchdog++ >MAX_CHANNEL_NUMBER ) - { +if (watchdog++ >MAX_CHANNEL_NUMBER ) {//if current channel is not in channel map, set to default channel. if (!channel_map[ieee->current_network.channel]) { ieee->current_network.channel =6 ; goto out;/* no good chans */ } } - }while (!channel_map[ieee->current_network.channel]); + }while (!channel_map[ieee->current_network.channel]);if (ieee->scanning ==0 ) goto out; ieee->set_chan (ieee->dev, ieee->current_network.channel);
@@ -589,31 +584,26 @@ EXPORT_SYMBOL(ieee80211_stop_scan);/* called with ieee->lock held */ static void ieee80211_start_scan (struct ieee80211_device *ieee) { -if (IS_DOT11D_ENABLE (ieee) ) - { +if (IS_DOT11D_ENABLE (ieee) ) {if (IS_COUNTRY_IE_VALID (ieee)) - {RESET_CIE_WATCHDOG (ieee); - } } -if (ieee->softmac_features &IEEE_SOFTMAC_SCAN ){ +if (ieee->softmac_features &IEEE_SOFTMAC_SCAN ) {if (ieee->scanning ==0 ) { ieee->scanning =1 ;schedule_delayed_work (&ieee->softmac_scan_wq,0 ); } - }else + }else { ieee->start_scan (ieee->dev); + } }/* called with wx_mutex held */ void ieee80211_start_scan_syncro (struct ieee80211_device *ieee) { -if (IS_DOT11D_ENABLE (ieee) ) - { +if (IS_DOT11D_ENABLE (ieee) ) {if (IS_COUNTRY_IE_VALID (ieee)) - {RESET_CIE_WATCHDOG (ieee); - } } ieee->sync_scan_hurryup =0 ;if (ieee->softmac_features &IEEE_SOFTMAC_SCAN )
@@ -714,8 +704,7 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *dHTConstructCapabilityElement (ieee, tmp_ht_cap_buf, &tmp_ht_cap_len, encrypt);HTConstructInfoElement (ieee, tmp_ht_info_buf, &tmp_ht_info_len, encrypt); -if (pHTInfo->bRegRT2RTAggregation) - { +if (pHTInfo->bRegRT2RTAggregation) { tmp_generic_ie_buf = ieee->pHTInfo->szRT2RTAggBuffer; tmp_generic_ie_len =sizeof (ieee->pHTInfo->szRT2RTAggBuffer);HTConstructRT2RTAggElement (ieee, tmp_generic_ie_buf, &tmp_generic_ie_len);
@@ -798,10 +787,9 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d tag += rate_ex_len -2 ; } -if (wpa_ie_len) - { -if (ieee->iw_mode ==IW_MODE_ADHOC ) - {//as Windows will set pairwise key same as the group key which is not allowed in Linux, so set this for IOT issue. WB 2008.07.07 +if (wpa_ie_len) { +if (ieee->iw_mode ==IW_MODE_ADHOC ) { +//as Windows will set pairwise key same as the group key which is not allowed in Linux, so set this for IOT issue. WB 2008.07.07 memcpy (&ieee->wpa_ie[14 ], &ieee->wpa_ie[8 ],4 ); }memcpy (tag, ieee->wpa_ie, ieee->wpa_ie_len);
@@ -979,30 +967,25 @@ ieee80211_association_req(struct ieee80211_network *beacon, encrypt = ieee->host_encrypt && crypt && crypt->ops && ((0 ==strcmp (crypt->ops->name,"WEP" ) || wpa_ie_len));/* Include High Throuput capability && Realtek proprietary */ -if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) - { +if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) { ht_cap_buf = (u8 *)&(ieee->pHTInfo->SelfHTCap); ht_cap_len =sizeof (ieee->pHTInfo->SelfHTCap);HTConstructCapabilityElement (ieee, ht_cap_buf, &ht_cap_len, encrypt); -if (ieee->pHTInfo->bCurrentRT2RTAggregation) - { +if (ieee->pHTInfo->bCurrentRT2RTAggregation) { realtek_ie_buf = ieee->pHTInfo->szRT2RTAggBuffer; realtek_ie_len =sizeof ( ieee->pHTInfo->szRT2RTAggBuffer);HTConstructRT2RTAggElement (ieee, realtek_ie_buf, &realtek_ie_len); } } -if (ieee->qos_support) { +if (ieee->qos_support) wmm_info_len = beacon->qos_data.supported ?9 :0 ; - }if (beacon->bCkipSupported) - { ckip_ie_len =30 +2 ; - } +if (beacon->bCcxRmEnable) - { ccxrm_ie_len =6 +2 ; - } +if (beacon->BssCcxVerNumber >=2 ) cxvernum_ie_len =5 +2 ;
@@ -1098,8 +1081,7 @@ ieee80211_association_req(struct ieee80211_network *beacon, tag += osCcxAironetIE.Length; } -if (beacon->bCcxRmEnable) - { +if (beacon->bCcxRmEnable) {static u8 CcxRmCapBuf[] = {0x00 ,0x40 ,0x96 ,0x01 ,0x01 ,0x00 };OCTET_STRING osCcxRmCap;
@@ -1126,8 +1108,7 @@ ieee80211_association_req(struct ieee80211_network *beacon, }//HT cap element if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) { -if (ieee->pHTInfo->ePeerHTSpecVer !=HT_SPEC_VER_EWC ) - { +if (ieee->pHTInfo->ePeerHTSpecVer !=HT_SPEC_VER_EWC ) { tag =skb_put (skb, ht_cap_len); *tag++ =MFIE_TYPE_HT_CAP ; *tag++ = ht_cap_len -2 ;
@@ -1137,9 +1118,8 @@ ieee80211_association_req(struct ieee80211_network *beacon, }//choose what wpa_supplicant gives to associate. -if (wpa_ie_len) { +if (wpa_ie_len)skb_put_data (skb, ieee->wpa_ie, wpa_ie_len); - }if (wmm_info_len) { tag =skb_put (skb, wmm_info_len);
@@ -1153,8 +1133,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,#endif if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) { -if (ieee->pHTInfo->ePeerHTSpecVer ==HT_SPEC_VER_EWC ) - { +if (ieee->pHTInfo->ePeerHTSpecVer ==HT_SPEC_VER_EWC ) { tag =skb_put (skb, ht_cap_len); *tag++ =MFIE_TYPE_GENERIC ; *tag++ = ht_cap_len -2 ;
@@ -1187,10 +1166,10 @@ void ieee80211_associate_abort(struct ieee80211_device *ieee)* Here we will check if there are good nets to associate * with, so we retry or just get back to NO_LINK and scanning */ -if (ieee->state ==IEEE80211_ASSOCIATING_AUTHENTICATING ){ +if (ieee->state ==IEEE80211_ASSOCIATING_AUTHENTICATING ) {IEEE80211_DEBUG_MGMT ("Authentication failed\n" ); ieee->softmac_stats.no_auth_rs++; - }else { + }else {IEEE80211_DEBUG_MGMT ("Association failed\n" ); ieee->softmac_stats.no_ass_rs++; }
@@ -1220,9 +1199,9 @@ static void ieee80211_associate_step1(struct ieee80211_device *ieee) ieee->softmac_stats.tx_auth_rq++; skb =ieee80211_authentication_req (beacon, ieee,0 ); -if (!skb) +if (!skb) {ieee80211_associate_abort (ieee); -else { + }else { ieee->state =IEEE80211_ASSOCIATING_AUTHENTICATING ;IEEE80211_DEBUG_MGMT ("Sending authentication request\n" );softmac_mgmt_xmit (skb, ieee);
@@ -1248,9 +1227,9 @@ static void ieee80211_auth_challenge(struct ieee80211_device *ieee, ieee->softmac_stats.tx_auth_rq++; skb =ieee80211_authentication_req (beacon, ieee, chlen +2 ); -if (!skb) +if (!skb) {ieee80211_associate_abort (ieee); -else { + }else { c =skb_put (skb, chlen +2 ); *(c++) =MFIE_TYPE_CHALLENGE ; *(c++) = chlen;
@@ -1278,9 +1257,9 @@ static void ieee80211_associate_step2(struct ieee80211_device *ieee) ieee->softmac_stats.tx_ass_rq++; skb =ieee80211_association_req (beacon, ieee); -if (!skb) +if (!skb) {ieee80211_associate_abort (ieee); -else { + }else {softmac_mgmt_xmit (skb, ieee);mod_timer (&ieee->associate_timer, jiffies + (HZ /2 ));//dev_kfree_skb_any(skb);//edit by thomas
@@ -1291,28 +1270,24 @@ static void ieee80211_associate_complete_wq(struct work_struct *work) struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, associate_complete_wq);printk (KERN_INFO "Associated successfully\n" );if (ieee80211_is_54g (&ieee->current_network) && - (ieee->modulation &IEEE80211_OFDM_MODULATION )){ + (ieee->modulation &IEEE80211_OFDM_MODULATION )) { ieee->rate =108 ;printk (KERN_INFO "Using G rates:%d\n" , ieee->rate); - }else { + }else { ieee->rate =22 ;printk (KERN_INFO "Using B rates:%d\n" , ieee->rate); } -if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) - { +if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) {printk ("Successfully associated, ht enabled\n" );HTOnAssocRsp (ieee); - } -else - { + }else {printk ("Successfully associated, ht not enabled(%d, %d)\n" , ieee->pHTInfo->bCurrentHTSupport, ieee->pHTInfo->bEnableHT);memset (ieee->dot11HTOperationalRateSet,0 ,16 );//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT); } ieee->LinkDetectInfo.SlotNum =2 * (1 + ieee->current_network.beacon_interval /500 );// To prevent the immediately calling watch_dog after association. -if (ieee->LinkDetectInfo.NumRecvBcnInPeriod ==0 || ieee->LinkDetectInfo.NumRecvDataInPeriod ==0 ) - { +if (ieee->LinkDetectInfo.NumRecvBcnInPeriod ==0 || ieee->LinkDetectInfo.NumRecvDataInPeriod ==0 ) { ieee->LinkDetectInfo.NumRecvBcnInPeriod =1 ; ieee->LinkDetectInfo.NumRecvDataInPeriod =1 ; }
@@ -1403,7 +1378,7 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee* and the network does broadcast and that those two bssid matches */ (!apset && ssidset && ssidbroad && ssidmatch) - ){ + ) {/* if the essid is hidden replace it with the * essid provided by the user. */
@@ -1424,32 +1399,29 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee//ieee->pHTInfo->IOTAction = 0; HTResetIOTSetting (ieee->pHTInfo); -if (ieee->iw_mode ==IW_MODE_INFRA ){ +if (ieee->iw_mode ==IW_MODE_INFRA ) {/* Join the network for the first time */ ieee->AsocRetryCount =0 ;//for HT by amy 080514 if ((ieee->current_network.qos_data.supported ==1 ) && -// (ieee->pHTInfo->bEnableHT && ieee->current_network.bssht.bdSupportHT)) - ieee->current_network.bssht.bdSupportHT) +// (ieee->pHTInfo->bEnableHT && ieee->current_network.bssht.bdSupportHT)) + ieee->current_network.bssht.bdSupportHT) {/*WB, 2008.09.09:bCurrentHTSupport and bEnableHT two flags are going to put together to check whether we are in HT now, so needn't to check bEnableHT flags here. That's is to say we will set to HT support whenever joined AP has the ability to support HT. And whether we are in HT or not, please check bCurrentHTSupport&&bEnableHT now please.*/ - {// ieee->pHTInfo->bCurrentHTSupport = true; HTResetSelfAndSavePeerSetting (ieee, &(ieee->current_network)); - } -else - { + }else { ieee->pHTInfo->bCurrentHTSupport = false; } ieee->state =IEEE80211_ASSOCIATING ;schedule_work (&ieee->associate_procedure_wq); - }else { + }else {if (ieee80211_is_54g (&ieee->current_network) && - (ieee->modulation &IEEE80211_OFDM_MODULATION )){ + (ieee->modulation &IEEE80211_OFDM_MODULATION )) { ieee->rate =108 ; ieee->SetWirelessMode (ieee->dev,IEEE_G );printk (KERN_INFO "Using G rates\n" ); - }else { + }else { ieee->rate =22 ; ieee->SetWirelessMode (ieee->dev,IEEE_B );printk (KERN_INFO "Using B rates\n" );
@@ -1545,7 +1517,7 @@ static short probe_rq_parse(struct ieee80211_device *ieee, struct sk_buff *skb, tag = skb->data +sizeof (struct rtl_80211_hdr_3addr ); -while (tag +1 < skbend){ +while (tag +1 < skbend) {if (*tag ==0 ) { ssid = tag +2 ; ssidlen = *(tag +1 );
@@ -1600,7 +1572,7 @@ static inline u16 assoc_parse(struct ieee80211_device *ieee, struct sk_buff *skb (ieee->current_network.mode == IEEE_N_24G) && (ieee->AsocRetryCount++ < (RT_ASOC_RETRY_LIMIT - 1)))) { ieee->pHTInfo->IOTAction |= HT_IOT_ACT_PURE_N_MODE; - }else { + } else { ieee->AsocRetryCount =0 ; }
@@ -1631,9 +1603,8 @@ ieee80211_rx_auth_rq(struct ieee80211_device *ieee, struct sk_buff *skb) ieee->softmac_stats.rx_auth_rq++; status =auth_rq_parse (skb, dest); -if (status !=-1 ) { +if (status !=-1 )ieee80211_resp_to_auth (ieee, status, dest); - }//DMESG("Dest is "MACSTR, MAC2STR(dest)); }
@@ -1644,9 +1615,8 @@ ieee80211_rx_assoc_rq(struct ieee80211_device *ieee, struct sk_buff *skb)//unsigned long flags; ieee->softmac_stats.rx_ass_rq++; -if (assoc_rq_parse (skb, dest) !=-1 ) { +if (assoc_rq_parse (skb, dest) !=-1 )ieee80211_resp_to_assoc_rq (ieee, dest); - }printk (KERN_INFO "New client associated: %pM\n" , dest);//FIXME
@@ -1720,7 +1690,7 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee)if ((ieee->ps ==IEEE80211_PS_DISABLED || ieee->iw_mode !=IW_MODE_INFRA || - ieee->state !=IEEE80211_LINKED )){ + ieee->state !=IEEE80211_LINKED )) {// #warning CHECK_LOCK_HERE spin_lock_irqsave (&ieee->mgmt_tx_lock, flags2);
@@ -1734,15 +1704,14 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee)if (sleep ==0 ) goto out; -if (sleep ==1 ){ -if (ieee->sta_sleep ==1 ) +if (sleep ==1 ) { +if (ieee->sta_sleep ==1 ) { ieee->enter_sleep_state (ieee->dev, th, tl); - -else if (ieee->sta_sleep ==0 ){ + }else if (ieee->sta_sleep ==0 ) {// printk("send null 1\n"); spin_lock_irqsave (&ieee->mgmt_tx_lock, flags2); -if (ieee->ps_is_queue_empty (ieee->dev)){ +if (ieee->ps_is_queue_empty (ieee->dev)) { ieee->sta_sleep =2 ; ieee->ps_request_tx_ack (ieee->dev);
@@ -1754,7 +1723,7 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee) }spin_unlock_irqrestore (&ieee->mgmt_tx_lock, flags2); } - }else if (sleep ==2 ){ + }else if (sleep ==2 ) {//#warning CHECK_LOCK_HERE spin_lock_irqsave (&ieee->mgmt_tx_lock, flags2);
@@ -1794,7 +1763,7 @@ void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success)spin_lock_irqsave (&ieee->lock, flags); -if (ieee->sta_sleep ==2 ){ +if (ieee->sta_sleep ==2 ) {/* Null frame with PS bit set */ if (success) { ieee->sta_sleep =1 ;
@@ -1803,9 +1772,8 @@ void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success)/* if the card report not success we can't be sure the AP * has not RXed so we can't assume the AP believe us awake */ - } -/* 21112005 - tx again null without PS bit if lost */ -else { + }else { +/* 21112005 - tx again null without PS bit if lost */ if ((ieee->sta_sleep ==0 ) && !success) {spin_lock_irqsave (&ieee->mgmt_tx_lock, flags2);ieee80211_sta_ps_send_null_frame (ieee,0 );
@@ -1823,8 +1791,7 @@ static void ieee80211_process_action(struct ieee80211_device *ieee,u8 *act =ieee80211_get_payload (header);u8 tmp =0 ;// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len); -if (act ==NULL ) - { +if (act ==NULL ) {IEEE80211_DEBUG (IEEE80211_DL_ERR ,"error to get payload of action frame\n" );return ; }
@@ -1890,9 +1857,9 @@ static void ieee80211_check_auth_response(struct ieee80211_device *ieee, bHalfSupportNmode) { netdev_dbg(ieee->dev, "enter half N mode\n"); ieee->bHalfWirelessN24GMode = true; - } else + } else { ieee->bHalfWirelessN24GMode = false; - + }ieee80211_associate_step2 (ieee); }else {ieee80211_auth_challenge (ieee, challenge, chlen);
@@ -1933,8 +1900,8 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,IEEE80211_DEBUG_MGMT ("received [RE]ASSOCIATION RESPONSE (%d)\n" ,WLAN_FC_GET_STYPE (header->frame_ctl));if ((ieee->softmac_features &IEEE_SOFTMAC_ASSOCIATE ) && - ieee->state ==IEEE80211_ASSOCIATING_AUTHENTICATED && - ieee->iw_mode ==IW_MODE_INFRA ){ + ieee->state ==IEEE80211_ASSOCIATING_AUTHENTICATED && + ieee->iw_mode ==IW_MODE_INFRA ) {struct ieee80211_network network_resp;struct ieee80211_network *network = &network_resp;
@@ -1950,11 +1917,10 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,memset (network,0 ,sizeof (*network));if (ieee80211_parse_info_param (ieee, assoc_resp->info_element,\ rx_stats->len -sizeof (*assoc_resp),\ - network, rx_stats)){ + network, rx_stats)) {return 1 ; - } -else - {//filling the PeerHTCap. //maybe not necessary as we can get its info from current_network. + }else { +//filling the PeerHTCap. //maybe not necessary as we can get its info from current_network. memcpy (ieee->pHTInfo->PeerHTCapBuf, network->bssht.bdHTCapBuf, network->bssht.bdHTCapLen);memcpy (ieee->pHTInfo->PeerHTInfoBuf, network->bssht.bdHTInfoBuf, network->bssht.bdHTInfoLen); }
@@ -1971,11 +1937,10 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,IEEE80211_DEBUG_MGMT ("Association response status code 0x%x\n" , errcode); -if (ieee->AsocRetryCount <RT_ASOC_RETRY_LIMIT ) { +if (ieee->AsocRetryCount <RT_ASOC_RETRY_LIMIT )schedule_work (&ieee->associate_procedure_wq); - }else { +else ieee80211_associate_abort (ieee); - } } }break ;
@@ -2004,7 +1969,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,if ((ieee->softmac_features &IEEE_SOFTMAC_PROBERS ) && ((ieee->iw_mode ==IW_MODE_ADHOC || ieee->iw_mode ==IW_MODE_MASTER ) && - ieee->state ==IEEE80211_LINKED )){ + ieee->state ==IEEE80211_LINKED )) {ieee80211_rx_probe_rq (ieee, skb); }break ;
@@ -2016,7 +1981,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,*/ if ((ieee->softmac_features &IEEE_SOFTMAC_ASSOCIATE ) && ieee->state ==IEEE80211_LINKED && - ieee->iw_mode ==IW_MODE_INFRA ){ + ieee->iw_mode ==IW_MODE_INFRA ) { ieee->state =IEEE80211_ASSOCIATING ; ieee->softmac_stats.reassoc++;
@@ -2071,9 +2036,9 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device * ieee->stats.tx_bytes +=le16_to_cpu (txb->payload_size); ieee->stats.tx_packets++; tcb_desc = (struct cb_desc *)(txb->fragments[0 ]->cb +MAX_DEV_ADDR_SIZE ); -if (tcb_desc->bMulticast) { +if (tcb_desc->bMulticast) ieee->stats.multicast++; - } +/* if xmit available, just xmit it immediately, else just insert it to the wait queue */ for (i =0 ; i < txb->nr_frags; i++) {#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
@@ -2094,7 +2059,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *#else skb_queue_tail (&ieee->skb_waitQ[queue_index], txb->fragments[i]);#endif - }else { + }else { ieee->softmac_data_hard_start_xmit ( txb->fragments[i], ieee->dev, ieee->rate);
@@ -2115,10 +2080,10 @@ static void ieee80211_resume_tx(struct ieee80211_device *ieee) {int i;for (i = ieee->tx_pending.frag; i < ieee->tx_pending.txb->nr_frags; i++) { -if (ieee->queue_stop){ +if (ieee->queue_stop) { ieee->tx_pending.frag = i;return ; - }else { + }else { ieee->softmac_data_hard_start_xmit ( ieee->tx_pending.txb->fragments[i], ieee->dev, ieee->rate);
@@ -2294,10 +2259,10 @@ static void ieee80211_start_ibss_wq(struct work_struct *work) ieee->current_network.rates[1 ] =IEEE80211_BASIC_RATE_MASK |IEEE80211_CCK_RATE_2MB ; ieee->current_network.rates[2 ] =IEEE80211_BASIC_RATE_MASK |IEEE80211_CCK_RATE_5MB ; ieee->current_network.rates[3 ] =IEEE80211_BASIC_RATE_MASK |IEEE80211_CCK_RATE_11MB ; - }else + }else { ieee->current_network.rates_len =0 ; - -if (ieee->modulation &IEEE80211_OFDM_MODULATION ){ + } +if (ieee->modulation &IEEE80211_OFDM_MODULATION ) { ieee->current_network.rates_ex_len =8 ; ieee->current_network.rates_ex[0 ] =IEEE80211_BASIC_RATE_MASK |IEEE80211_OFDM_RATE_6MB ;
@@ -2310,7 +2275,7 @@ static void ieee80211_start_ibss_wq(struct work_struct *work) ieee->current_network.rates_ex[7 ] =IEEE80211_BASIC_RATE_MASK |IEEE80211_OFDM_RATE_54MB ; ieee->rate =108 ; - }else { + }else { ieee->current_network.rates_ex_len =0 ; ieee->rate =22 ; }
@@ -2353,12 +2318,9 @@ void ieee80211_start_bss(struct ieee80211_device *ieee)// Ref: 802.11d 11.1.3.3 // STA shall not start a BSS unless properly formed Beacon frame including a Country IE. // -if (IS_DOT11D_ENABLE (ieee) && !IS_COUNTRY_IE_VALID (ieee)) - { +if (IS_DOT11D_ENABLE (ieee) && !IS_COUNTRY_IE_VALID (ieee)) {if (! ieee->bGlobalDomain) - {return ; - } }/* check if we have already found the net we * are interested in (if any).
@@ -2528,11 +2490,11 @@ void ieee80211_start_protocol(struct ieee80211_device *ieee) ieee->proto_started =1 ;if (ieee->current_network.channel ==0 ) { -do { +do { ch++;if (ch >MAX_CHANNEL_NUMBER )return ;/* no channel found */ - }while (!GET_DOT11D_INFO (ieee)->channel_map[ch]); + }while (!GET_DOT11D_INFO (ieee)->channel_map[ch]); ieee->current_network.channel = ch; }
@@ -2575,9 +2537,9 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee) ieee->state =IEEE80211_NOLINK ; ieee->sync_scan_hurryup =0 ; -for (i =0 ; i <5 ; i++) { - ieee->seq_ctrl[i] =0 ; - } +for (i =0 ; i <5 ; i++) + ieee->seq_ctrl[i] =0 ; + ieee->pDot11dInfo =kzalloc (sizeof (RT_DOT11D_INFO ),GFP_KERNEL );if (!ieee->pDot11dInfo)IEEE80211_DEBUG (IEEE80211_DL_ERR ,"can't alloc memory for DOT11D\n" );
@@ -2732,12 +2694,11 @@ static int ieee80211_wpa_set_auth_algs(struct ieee80211_device *ieee, int value) sec.auth_mode =WLAN_AUTH_SHARED_KEY ; ieee->open_wep =0 ; ieee->auth_mode =1 ; - }else if (value &AUTH_ALG_OPEN_SYSTEM ){ + }else if (value &AUTH_ALG_OPEN_SYSTEM ) { sec.auth_mode =WLAN_AUTH_OPEN ; ieee->open_wep =1 ; ieee->auth_mode =0 ; - } -else if (value &IW_AUTH_ALG_LEAP ){ + }else if (value &IW_AUTH_ALG_LEAP ) { sec.auth_mode =WLAN_AUTH_LEAP ; ieee->open_wep =1 ; ieee->auth_mode =2 ;
@@ -2788,8 +2749,7 @@ static int ieee80211_wpa_set_param(struct ieee80211_device *ieee, u8 name, u32 vif (!value) { sec.flags |=SEC_LEVEL ; sec.level =SEC_LEVEL_0 ; - } -else { + }else { sec.flags |=SEC_LEVEL ; sec.level =SEC_LEVEL_1 ; }
@@ -2935,9 +2895,9 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, ieee->tx_keyidx = param->u.crypt.idx; sec.active_key = param->u.crypt.idx; sec.flags |=SEC_ACTIVE_KEY ; - }else + }else { sec.flags &= ~SEC_ACTIVE_KEY ; - + }memcpy (sec.keys[param->u.crypt.idx], param->u.crypt.key, param->u.crypt.key_len);
Signature · 1 line
2.18.0
PATCH 6/12 staging:rtl8192u: rename HT_EXTCHNL_OFFSET -> enum ht_extension_chan_width
In reply to John Whitmoreremove the typedef of enumerated type HT_EXTCHNL_OFFSET and replace it with 'enum ht_extension_chan_offset'
--- drivers/staging/rtl8192u/ieee80211/ieee80211.h | 4 ++-- drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c | 2 +- drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h | 6 +++--- drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 6 +++--- drivers/staging/rtl8192u/r819xU_phy.c | 5 +++-- drivers/staging/rtl8192u/r819xU_phy.h | 2 +- 6 files changed, 13 insertions(+), 12 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211.h +2 -2
@@ -2002,7 +2002,7 @@ struct ieee80211_device {short (*check_nic_enough_desc)(struct net_device *dev,int queue_index);//added by wb for HT related // void (*SwChnlByTimerHandler)(struct net_device *dev, int channel); -void (*SetBWModeHandler)(struct net_device *dev,enum ht_channel_width Bandwidth,HT_EXTCHNL_OFFSET Offset); +void (*SetBWModeHandler)(struct net_device *dev,enum ht_channel_width Bandwidth,enum ht_extension_chan_offset Offset);// void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate); bool (*GetNmodeSupportBySecCfg)(struct net_device *dev);void (*SetWirelessMode)(struct net_device *dev,u8 wireless_mode);
@@ -2358,7 +2358,7 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString);void HTDebugHTInfo (u8 *InfoIE,u8 *TitleString);void HTSetConnectBwMode (struct ieee80211_device *ieee, -enum ht_channel_width Bandwidth,HT_EXTCHNL_OFFSET Offset); +enum ht_channel_width Bandwidth,enum ht_extension_chan_offset Offset);void HTUpdateDefaultSetting (struct ieee80211_device *ieee);void HTConstructCapabilityElement (struct ieee80211_device *ieee,u8 *posHTCap,u8 *len,u8 isEncrypt);
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c +1 -1
@@ -302,7 +302,7 @@ void ieee80211_wx_sync_scan_wq(struct work_struct *work) { struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, wx_sync_scan_wq);short chan; -HT_EXTCHNL_OFFSET chan_offset =0 ; +enum ht_extension_chan_offset chan_offset =0 ;enum ht_channel_width bandwidth =0 ;int b40M =0 ;
drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h +3 -3
@@ -36,12 +36,12 @@ enum ht_channel_width {// Represent Extension Channel Offset in HT Capabilities // This is available only in 40Mhz mode. // -typedef enum _HT_EXTCHNL_OFFSET { +enum ht_extension_chan_offset {HT_EXTCHNL_OFFSET_NO_EXT =0 ,HT_EXTCHNL_OFFSET_UPPER =1 ,HT_EXTCHNL_OFFSET_NO_DEF =2 ,HT_EXTCHNL_OFFSET_LOWER =3 , -}HT_EXTCHNL_OFFSET , *PHT_EXTCHNL_OFFSET ; +}; typedef enum _CHNLOP { CHNLOP_NONE = 0, // No Action now
@@ -237,7 +237,7 @@ typedef struct _RT_HIGH_THROUGHPUT {u8 PeerMimoPs;// 40MHz Channel Offset settings. -HT_EXTCHNL_OFFSET CurSTAExtChnlOffset; +enum ht_extension_chan_offset CurSTAExtChnlOffset;u8 bCurTxBW40MHz;// If we use 40 MHz to Tx u8 PeerBandwidth;
drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c +3 -3
@@ -894,7 +894,7 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,return true; } -void HTSetConnectBwMode (struct ieee80211_device *ieee,enum ht_channel_width Bandwidth,HT_EXTCHNL_OFFSET Offset); +void HTSetConnectBwMode (struct ieee80211_device *ieee,enum ht_channel_width Bandwidth,enum ht_extension_chan_offset Offset);void HTOnAssocRsp (struct ieee80211_device *ieee) {PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -936,7 +936,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTInfo, sizeof(HT_INFORMATION_ELE)); // Config Supported Channel Width setting // -HTSetConnectBwMode (ieee, (enum ht_channel_width )(pPeerHTCap->ChlWidth), (HT_EXTCHNL_OFFSET )(pPeerHTInfo->ExtChlOffset)); +HTSetConnectBwMode (ieee, (enum ht_channel_width )(pPeerHTCap->ChlWidth), (enum ht_extension_chan_offset )(pPeerHTInfo->ExtChlOffset)); pHTInfo->bCurTxBW40MHz = (pPeerHTInfo->RecommemdedTxWidth ==1 );
@@ -1290,7 +1290,7 @@ u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame)/* * This function set bandwidth mode in protocol layer. */ -void HTSetConnectBwMode (struct ieee80211_device *ieee,enum ht_channel_width Bandwidth,HT_EXTCHNL_OFFSET Offset) +void HTSetConnectBwMode (struct ieee80211_device *ieee,enum ht_channel_width Bandwidth,enum ht_extension_chan_offset Offset) {PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;// u32 flags = 0;
drivers/staging/rtl8192u/r819xU_phy.c +3 -2
@@ -1663,8 +1663,9 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)* notice: I doubt whether SetBWModeInProgress flag is necessary as we can * test whether current work in the queue or not.//do I? *****************************************************************************/ -void rtl8192_SetBWMode (struct net_device *dev,enum ht_channel_width bandwidth, -HT_EXTCHNL_OFFSET offset) +void rtl8192_SetBWMode (struct net_device *dev, +enum ht_channel_width bandwidth, +enum ht_extension_chan_offset offset) {struct r8192_priv *priv =ieee80211_priv (dev);
drivers/staging/rtl8192u/r819xU_phy.h +1 -1
@@ -81,7 +81,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,u8 rtl8192_phy_SwChnl (struct net_device *dev,u8 channel);void rtl8192_SetBWMode (struct net_device *dev,enum ht_channel_width bandwidth, -HT_EXTCHNL_OFFSET offset); +enum ht_extension_chan_offset offset);void rtl8192_SwChnl_WorkItem (struct net_device *dev);void rtl8192_SetBWModeWorkItem (struct net_device *dev); bool rtl8192_SetRFPowerState(struct net_device *dev,
Signature · 1 line
2.18.0
PATCH 7/12 staging:rtl8192u: Correct spacing before and after parenthesis - Style
In reply to John WhitmoreCorrected coding style issues aroung opening and closed parenthesis.
--- .../rtl8192u/ieee80211/ieee80211_softmac.c | 78 +++++++++---------- 1 file changed, 36 insertions(+), 42 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +36 -42
@@ -263,7 +263,7 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee/* check whether the managed packet queued greater than 5 */ if (!ieee->check_nic_enough_desc (ieee->dev, tcb_desc->queue_index) ||\ (skb_queue_len (&ieee->skb_waitQ[tcb_desc->queue_index]) !=0 ) || \ - (ieee->queue_stop) ) { + (ieee->queue_stop)) {/* insert the skb packet to the management queue */ /* as for the completion function, it does not need * to check it any more.
@@ -493,7 +493,7 @@ static void ieee80211_softmac_scan_wq(struct work_struct *work) } } }while (!channel_map[ieee->current_network.channel]); -if (ieee->scanning ==0 ) +if (ieee->scanning ==0 ) goto out; ieee->set_chan (ieee->dev, ieee->current_network.channel);if (channel_map[ieee->current_network.channel] ==1 )
@@ -584,7 +584,7 @@ EXPORT_SYMBOL(ieee80211_stop_scan);/* called with ieee->lock held */ static void ieee80211_start_scan (struct ieee80211_device *ieee) { -if (IS_DOT11D_ENABLE (ieee) ) { +if (IS_DOT11D_ENABLE (ieee)) {if (IS_COUNTRY_IE_VALID (ieee))RESET_CIE_WATCHDOG (ieee); }
@@ -601,7 +601,7 @@ static void ieee80211_start_scan(struct ieee80211_device *ieee)/* called with wx_mutex held */ void ieee80211_start_scan_syncro (struct ieee80211_device *ieee) { -if (IS_DOT11D_ENABLE (ieee) ) { +if (IS_DOT11D_ENABLE (ieee)) {if (IS_COUNTRY_IE_VALID (ieee))RESET_CIE_WATCHDOG (ieee); }
@@ -728,9 +728,9 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *dreturn NULL ;skb_reserve (skb, ieee->tx_headroom); beacon_buf =skb_put (skb, (beacon_size - ieee->tx_headroom)); -memcpy (beacon_buf->header.addr1, dest,ETH_ALEN ); -memcpy (beacon_buf->header.addr2, ieee->dev->dev_addr,ETH_ALEN ); -memcpy (beacon_buf->header.addr3, ieee->current_network.bssid,ETH_ALEN ); +memcpy (beacon_buf->header.addr1, dest,ETH_ALEN ); +memcpy (beacon_buf->header.addr2, ieee->dev->dev_addr,ETH_ALEN ); +memcpy (beacon_buf->header.addr3, ieee->current_network.bssid,ETH_ALEN ); beacon_buf->header.duration_id =0 ;/* FIXME */ beacon_buf->beacon_interval =
@@ -973,7 +973,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,HTConstructCapabilityElement (ieee, ht_cap_buf, &ht_cap_len, encrypt);if (ieee->pHTInfo->bCurrentRT2RTAggregation) { realtek_ie_buf = ieee->pHTInfo->szRT2RTAggBuffer; - realtek_ie_len =sizeof ( ieee->pHTInfo->szRT2RTAggBuffer); + realtek_ie_len =sizeof (ieee->pHTInfo->szRT2RTAggBuffer);HTConstructRT2RTAggElement (ieee, realtek_ie_buf, &realtek_ie_len); } }
@@ -1033,7 +1033,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,memcpy (ieee->ap_mac_addr, beacon->bssid,ETH_ALEN );//for HW security, John hdr->capability =cpu_to_le16 (WLAN_CAPABILITY_BSS ); -if (beacon->capability &WLAN_CAPABILITY_PRIVACY ) +if (beacon->capability &WLAN_CAPABILITY_PRIVACY ) hdr->capability |=cpu_to_le16 (WLAN_CAPABILITY_PRIVACY );if (beacon->capability &WLAN_CAPABILITY_SHORT_PREAMBLE )
@@ -1237,7 +1237,7 @@ static void ieee80211_auth_challenge(struct ieee80211_device *ieee,IEEE80211_DEBUG_MGMT ("Sending authentication challenge response\n" ); -ieee80211_encrypt_fragment (ieee, skb,sizeof (struct rtl_80211_hdr_3addr )); +ieee80211_encrypt_fragment (ieee, skb,sizeof (struct rtl_80211_hdr_3addr ));softmac_mgmt_xmit (skb, ieee);mod_timer (&ieee->associate_timer, jiffies + (HZ /2 ));
@@ -1287,7 +1287,7 @@ static void ieee80211_associate_complete_wq(struct work_struct *work) } ieee->LinkDetectInfo.SlotNum =2 * (1 + ieee->current_network.beacon_interval /500 );// To prevent the immediately calling watch_dog after association. -if (ieee->LinkDetectInfo.NumRecvBcnInPeriod ==0 || ieee->LinkDetectInfo.NumRecvDataInPeriod ==0 ) { +if (ieee->LinkDetectInfo.NumRecvBcnInPeriod ==0 || ieee->LinkDetectInfo.NumRecvDataInPeriod ==0 ) { ieee->LinkDetectInfo.NumRecvBcnInPeriod =1 ; ieee->LinkDetectInfo.NumRecvDataInPeriod =1 ; }
@@ -1367,13 +1367,13 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee ssidmatch = (ieee->current_network.ssid_len == net->ssid_len) && (!strncmp (ieee->current_network.ssid, net->ssid, net->ssid_len)); - if ( /* if the user set the AP check if match. - * if the network does not broadcast essid we check the user supplyed ANY essid - * if the network does broadcast and the user does not set essid it is OK - * if the network does broadcast and the user did set essid chech if essid match - */ - (apset && apmatch && - ((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset)) ) || +/* if the user set the AP check if match. +* if the network does not broadcast essid we check the user supplyed ANY essid +* if the network does broadcast and the user does not set essid it is OK +* if the network does broadcast and the user did set essid chech if essid match +*/ + if ((apset && apmatch && + ((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset))) ||/* if the ap is not set, check that the user set the bssid * and the network does broadcast and that those two bssid matches */
@@ -1508,14 +1508,14 @@ static short probe_rq_parse(struct ieee80211_device *ieee, struct sk_buff *skb,struct rtl_80211_hdr_3addr *header = (struct rtl_80211_hdr_3addr *)skb->data; -if (skb->len <sizeof (struct rtl_80211_hdr_3addr )) +if (skb->len <sizeof (struct rtl_80211_hdr_3addr ))return -1 ;/* corrupted */ memcpy (src, header->addr2,ETH_ALEN ); skbend = (u8 *)skb->data + skb->len; - tag = skb->data +sizeof (struct rtl_80211_hdr_3addr ); + tag = skb->data +sizeof (struct rtl_80211_hdr_3addr );while (tag +1 < skbend) {if (*tag ==0 ) {
@@ -1660,7 +1660,7 @@ static short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h, ieee->last_rx_ps_time + msecs_to_jiffies(timeout)))return 0 ; -if ((ieee->softmac_features &IEEE_SOFTMAC_SINGLE_QUEUE ) && +if ((ieee->softmac_features &IEEE_SOFTMAC_SINGLE_QUEUE ) && (ieee->mgmt_queue_tail != ieee->mgmt_queue_head))return 0 ;
@@ -1931,12 +1931,10 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb, }else {/* aid could not been allocated */ ieee->softmac_stats.rx_ass_err++; -printk ( -"Association response status code 0x%x\n" , - errcode); -IEEE80211_DEBUG_MGMT ( -"Association response status code 0x%x\n" , - errcode); +printk ("Association response status code 0x%x\n" , + errcode); +IEEE80211_DEBUG_MGMT ("Association response status code 0x%x\n" , + errcode);if (ieee->AsocRetryCount <RT_ASOC_RETRY_LIMIT )schedule_work (&ieee->associate_procedure_wq);else
@@ -2060,9 +2058,8 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *skb_queue_tail (&ieee->skb_waitQ[queue_index], txb->fragments[i]);#endif }else { - ieee->softmac_data_hard_start_xmit ( - txb->fragments[i], - ieee->dev, ieee->rate); + ieee->softmac_data_hard_start_xmit (txb->fragments[i], + ieee->dev, ieee->rate);//ieee->stats.tx_packets++; //ieee->stats.tx_bytes += txb->fragments[i]->len; //ieee->dev->trans_start = jiffies;
@@ -2084,10 +2081,9 @@ static void ieee80211_resume_tx(struct ieee80211_device *ieee) ieee->tx_pending.frag = i;return ; }else { - ieee->softmac_data_hard_start_xmit ( - ieee->tx_pending.txb->fragments[i], - ieee->dev, ieee->rate); -//(i+1)<ieee->tx_pending.txb->nr_frags); + ieee->softmac_data_hard_start_xmit (ieee->tx_pending.txb->fragments[i], + ieee->dev, ieee->rate); +//(i+1)<ieee->tx_pending.txb->nr_frags); ieee->stats.tx_packets++;netif_trans_update (ieee->dev); }
@@ -2935,10 +2931,9 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,return ret; } -static inline struct sk_buff *ieee80211_disassociate_skb ( -struct ieee80211_network *beacon, -struct ieee80211_device *ieee, -u8 asRsn) +static inline struct sk_buff *ieee80211_disassociate_skb (struct ieee80211_network *beacon, +struct ieee80211_device *ieee, +u8 asRsn) {struct sk_buff *skb;struct ieee80211_disassoc *disass;
@@ -2960,10 +2955,9 @@ static inline struct sk_buff *ieee80211_disassociate_skb( }void -SendDisassociation ( -struct ieee80211_device *ieee, -u8 *asSta, -u8 asRsn +SendDisassociation (struct ieee80211_device *ieee, +u8 *asSta, +u8 asRsn ) {struct ieee80211_network *beacon = &ieee->current_network;
Signature · 1 line
2.18.0
PATCH 8/12 staging:rtl8192u: Remove prohibited spaces - Coding Style
In reply to John WhitmoreSimple removal of spaces prohibited by the coding standard.
--- .../staging/rtl8192u/ieee80211/ieee80211_softmac.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +6 -6
@@ -1073,7 +1073,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,// CCX1 spec V1.13, A01.1 CKIP Negotiation (page23): // "The CKIP negotiation is started with the associate request from the client to the access point, // containing an Aironet element with both the MIC and KP bits set." - osCcxAironetIE.Octet[IE_CISCO_FLAG_POSITION ] |= (SUPPORT_CKIP_PK |SUPPORT_CKIP_MIC ) ; + osCcxAironetIE.Octet[IE_CISCO_FLAG_POSITION ] |= (SUPPORT_CKIP_PK |SUPPORT_CKIP_MIC ); tag =skb_put (skb, ckip_ie_len); *tag++ =MFIE_TYPE_AIRONET ; *tag++ = osCcxAironetIE.Length;
@@ -1202,7 +1202,7 @@ static void ieee80211_associate_step1(struct ieee80211_device *ieee)if (!skb) {ieee80211_associate_abort (ieee); }else { - ieee->state =IEEE80211_ASSOCIATING_AUTHENTICATING ; + ieee->state =IEEE80211_ASSOCIATING_AUTHENTICATING ;IEEE80211_DEBUG_MGMT ("Sending authentication request\n" );softmac_mgmt_xmit (skb, ieee);//BUGON when you try to add_timer twice, using mod_timer may be better, john0709
@@ -1796,7 +1796,7 @@ static void ieee80211_process_action(struct ieee80211_device *ieee,return ; } tmp = *act; - act ++; + act++;switch (tmp) {case ACT_CAT_BA :if (*act ==ACT_ADDBAREQ )
@@ -2115,7 +2115,7 @@ void ieee80211_wake_queue(struct ieee80211_device *ieee)struct rtl_80211_hdr_3addr *header;spin_lock_irqsave (&ieee->lock, flags); -if (! ieee->queue_stop) goto exit; +if (!ieee->queue_stop) goto exit; ieee->queue_stop =0 ;
@@ -2141,7 +2141,7 @@ void ieee80211_wake_queue(struct ieee80211_device *ieee) ieee->softmac_stats.swtxawake++;netif_wake_queue (ieee->dev); } -exit : +exit:spin_unlock_irqrestore (&ieee->lock, flags); }EXPORT_SYMBOL (ieee80211_wake_queue);
@@ -2315,7 +2315,7 @@ void ieee80211_start_bss(struct ieee80211_device *ieee)// STA shall not start a BSS unless properly formed Beacon frame including a Country IE. // if (IS_DOT11D_ENABLE (ieee) && !IS_COUNTRY_IE_VALID (ieee)) { -if (! ieee->bGlobalDomain) +if (!ieee->bGlobalDomain)return ; }/* check if we have already found the net we
Signature · 1 line
2.18.0
PATCH 9/12 staging:rtl8192u: Move trailing conditional statement to the following line
In reply to John WhitmoreCoding standard requires that the conditional statement is not on the same line as the 'if' or 'else' but on the following line. Statements moved accordingly.
--- .../rtl8192u/ieee80211/ieee80211_softmac.c | 25 +++++++++++++------ 1 file changed, 17 insertions(+), 8 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +17 -8
@@ -622,7 +622,8 @@ ieee80211_authentication_req(struct ieee80211_network *beacon,int len =sizeof (struct ieee80211_authentication ) + challengelen + ieee->tx_headroom; skb =dev_alloc_skb (len); -if (!skb)return NULL ; +if (!skb) +return NULL ;skb_reserve (skb, ieee->tx_headroom); auth =skb_put (skb,sizeof (struct ieee80211_authentication ));
@@ -680,7 +681,8 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *du8 *tmp_generic_ie_buf =NULL ;u8 tmp_generic_ie_len =0 ; -if (rate_ex_len >0 ) rate_ex_len +=2 ; +if (rate_ex_len >0 ) + rate_ex_len +=2 ;if (ieee->current_network.capability &WLAN_CAPABILITY_IBSS ) atim_len =4 ;
@@ -834,7 +836,8 @@ static struct sk_buff *ieee80211_assoc_resp(struct ieee80211_device *ieee,if (ieee->host_encrypt) crypt = ieee->crypt[ieee->tx_keyidx]; -else crypt =NULL ; +else + crypt =NULL ; encrypt = crypt && crypt->ops;
@@ -843,8 +846,10 @@ static struct sk_buff *ieee80211_assoc_resp(struct ieee80211_device *ieee, assoc->status =0 ; assoc->aid =cpu_to_le16 (ieee->assoc_id); -if (ieee->assoc_id ==0x2007 ) ieee->assoc_id =0 ; -else ieee->assoc_id++; +if (ieee->assoc_id ==0x2007 ) + ieee->assoc_id =0 ; +else + ieee->assoc_id++; tag =skb_put (skb, rate_len);
@@ -1529,9 +1534,12 @@ static short probe_rq_parse(struct ieee80211_device *ieee, struct sk_buff *skb, }//IEEE80211DMESG("Card MAC address is "MACSTR, MAC2STR(src)); -if (ssidlen ==0 )return 1 ; +if (ssidlen ==0 ) +return 1 ; + +if (!ssid) +return 1 ;/* ssid not found in tagged param */ -if (!ssid)return 1 ;/* ssid not found in tagged param */ return (!strncmp (ssid, ieee->current_network.ssid, ssidlen)); }
@@ -2115,7 +2123,8 @@ void ieee80211_wake_queue(struct ieee80211_device *ieee)struct rtl_80211_hdr_3addr *header;spin_lock_irqsave (&ieee->lock, flags); -if (!ieee->queue_stop) goto exit; +if (!ieee->queue_stop) + goto exit; ieee->queue_stop =0 ;
Signature · 1 line
2.18.0
PATCH 10/12 staging:rtl8192u: Remove unnecessary parentheses - Coding Style
In reply to John Whitmorecheckpatch.pl flags unnecessary parentheses so removed from code.
--- drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +4 -4
@@ -699,9 +699,9 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d encrypt = ieee->host_encrypt && crypt && crypt->ops && ((0 ==strcmp (crypt->ops->name,"WEP" ) || wpa_ie_len));/* HT ralated element */ - tmp_ht_cap_buf = (u8 *)&(ieee->pHTInfo->SelfHTCap); + tmp_ht_cap_buf = (u8 *)&ieee->pHTInfo->SelfHTCap; tmp_ht_cap_len =sizeof (ieee->pHTInfo->SelfHTCap); - tmp_ht_info_buf = (u8 *)&(ieee->pHTInfo->SelfHTInfo); + tmp_ht_info_buf = (u8 *)&ieee->pHTInfo->SelfHTInfo; tmp_ht_info_len =sizeof (ieee->pHTInfo->SelfHTInfo);HTConstructCapabilityElement (ieee, tmp_ht_cap_buf, &tmp_ht_cap_len, encrypt);HTConstructInfoElement (ieee, tmp_ht_info_buf, &tmp_ht_info_len, encrypt);
@@ -973,7 +973,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,/* Include High Throuput capability && Realtek proprietary */ if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) { - ht_cap_buf = (u8 *)&(ieee->pHTInfo->SelfHTCap); + ht_cap_buf = (u8 *)&ieee->pHTInfo->SelfHTCap; ht_cap_len =sizeof (ieee->pHTInfo->SelfHTCap);HTConstructCapabilityElement (ieee, ht_cap_buf, &ht_cap_len, encrypt);if (ieee->pHTInfo->bCurrentRT2RTAggregation) {
@@ -1413,7 +1413,7 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee ieee->current_network.bssht.bdSupportHT) {/*WB, 2008.09.09:bCurrentHTSupport and bEnableHT two flags are going to put together to check whether we are in HT now, so needn't to check bEnableHT flags here. That's is to say we will set to HT support whenever joined AP has the ability to support HT. And whether we are in HT or not, please check bCurrentHTSupport&&bEnableHT now please.*/ // ieee->pHTInfo->bCurrentHTSupport = true; -HTResetSelfAndSavePeerSetting (ieee, &(ieee->current_network)); +HTResetSelfAndSavePeerSetting (ieee, &ieee->current_network); } else { ieee->pHTInfo->bCurrentHTSupport = false; }
Signature · 1 line
2.18.0
PATCH 11/12 staging:rtl8192u: Correct indentation of ieee80211_softmac_new_net()
In reply to John WhitmoreCoding style change to correct the indentation of the function ieee80211_softmac_new_net()
--- .../rtl8192u/ieee80211/ieee80211_softmac.c | 101 +++++++++--------- 1 file changed, 50 insertions(+), 51 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +50 -51
@@ -1378,63 +1378,62 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee* if the network does broadcast and the user did set essid chech if essid match */ if ((apset && apmatch && - ((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset))) || -/* if the ap is not set, check that the user set the bssid -* and the network does broadcast and that those two bssid matches + ((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset))) || +/* if the ap is not set, check that the user set the bssid +* and the network does broadcast and that those two bssid matches +*/ + (!apset && ssidset && ssidbroad && ssidmatch)) { +/* if the essid is hidden replace it with the +* essid provided by the user. */ - (!apset && ssidset && ssidbroad && ssidmatch) - ) { -/* if the essid is hidden replace it with the -* essid provided by the user. -*/ -if (!ssidbroad) { -strncpy (tmp_ssid, ieee->current_network.ssid,IW_ESSID_MAX_SIZE ); - tmp_ssid_len = ieee->current_network.ssid_len; - } -memcpy (&ieee->current_network, net,sizeof (struct ieee80211_network )); - -strncpy (ieee->current_network.ssid, tmp_ssid,IW_ESSID_MAX_SIZE ); - ieee->current_network.ssid_len = tmp_ssid_len; -printk (KERN_INFO "Linking with %s,channel:%d, qos:%d, myHT:%d, networkHT:%d\n" , - ieee->current_network.ssid, - ieee->current_network.channel, - ieee->current_network.qos_data.supported, - ieee->pHTInfo->bEnableHT, - ieee->current_network.bssht.bdSupportHT); - -//ieee->pHTInfo->IOTAction = 0; -HTResetIOTSetting (ieee->pHTInfo); -if (ieee->iw_mode ==IW_MODE_INFRA ) { -/* Join the network for the first time */ - ieee->AsocRetryCount =0 ; -//for HT by amy 080514 -if ((ieee->current_network.qos_data.supported ==1 ) && -// (ieee->pHTInfo->bEnableHT && ieee->current_network.bssht.bdSupportHT)) - ieee->current_network.bssht.bdSupportHT) { +if (!ssidbroad) { +strncpy (tmp_ssid, ieee->current_network.ssid,IW_ESSID_MAX_SIZE ); + tmp_ssid_len = ieee->current_network.ssid_len; + } +memcpy (&ieee->current_network, net,sizeof (struct ieee80211_network )); + +strncpy (ieee->current_network.ssid, tmp_ssid,IW_ESSID_MAX_SIZE ); + ieee->current_network.ssid_len = tmp_ssid_len; +printk (KERN_INFO "Linking with %s,channel:%d, qos:%d, myHT:%d, networkHT:%d\n" , + ieee->current_network.ssid, + ieee->current_network.channel, + ieee->current_network.qos_data.supported, + ieee->pHTInfo->bEnableHT, + ieee->current_network.bssht.bdSupportHT); + +//ieee->pHTInfo->IOTAction = 0; +HTResetIOTSetting (ieee->pHTInfo); +if (ieee->iw_mode ==IW_MODE_INFRA ) { +/* Join the network for the first time */ + ieee->AsocRetryCount =0 ; +//for HT by amy 080514 +if ((ieee->current_network.qos_data.supported ==1 ) && +// (ieee->pHTInfo->bEnableHT && ieee->current_network.bssht.bdSupportHT)) + ieee->current_network.bssht.bdSupportHT) {/*WB, 2008.09.09:bCurrentHTSupport and bEnableHT two flags are going to put together to check whether we are in HT now, so needn't to check bEnableHT flags here. That's is to say we will set to HT support whenever joined AP has the ability to support HT. And whether we are in HT or not, please check bCurrentHTSupport&&bEnableHT now please.*/ // ieee->pHTInfo->bCurrentHTSupport = true; -HTResetSelfAndSavePeerSetting (ieee, &ieee->current_network); - }else { - ieee->pHTInfo->bCurrentHTSupport = false; - } +HTResetSelfAndSavePeerSetting (ieee, &ieee->current_network); + }else { + ieee->pHTInfo->bCurrentHTSupport = false; + } - ieee->state =IEEE80211_ASSOCIATING ; -schedule_work (&ieee->associate_procedure_wq); + ieee->state =IEEE80211_ASSOCIATING ; +schedule_work (&ieee->associate_procedure_wq); + }else { +if (ieee80211_is_54g (&ieee->current_network) && + (ieee->modulation &IEEE80211_OFDM_MODULATION )) { + ieee->rate =108 ; + ieee->SetWirelessMode (ieee->dev,IEEE_G ); +printk (KERN_INFO "Using G rates\n" ); }else { -if (ieee80211_is_54g (&ieee->current_network) && - (ieee->modulation &IEEE80211_OFDM_MODULATION )) { - ieee->rate =108 ; - ieee->SetWirelessMode (ieee->dev,IEEE_G ); -printk (KERN_INFO "Using G rates\n" ); - }else { - ieee->rate =22 ; - ieee->SetWirelessMode (ieee->dev,IEEE_B ); -printk (KERN_INFO "Using B rates\n" ); - } -memset (ieee->dot11HTOperationalRateSet,0 ,16 ); -//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT); - ieee->state =IEEE80211_LINKED ; + ieee->rate =22 ; + ieee->SetWirelessMode (ieee->dev,IEEE_B ); +printk (KERN_INFO "Using B rates\n" ); } +memset (ieee->dot11HTOperationalRateSet,0 ,16 ); +//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT); + ieee->state =IEEE80211_LINKED ; + } } } }
Signature · 1 line
2.18.0
PATCH 12/12 staging:rtl8192u: Correction of indentation issues - Coding Style
In reply to John WhitmoreSimple changes to correct indentation issues.
--- .../rtl8192u/ieee80211/ieee80211_softmac.c | 24 +++++++++---------- 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +12 -12
@@ -2354,10 +2354,10 @@ void ieee80211_disassociate(struct ieee80211_device *ieee) {netif_carrier_off (ieee->dev);if (ieee->softmac_features &IEEE_SOFTMAC_TX_QUEUE ) -ieee80211_reset_queue (ieee); +ieee80211_reset_queue (ieee);if (ieee->data_hard_stop) - ieee->data_hard_stop (ieee->dev); + ieee->data_hard_stop (ieee->dev);if (IS_DOT11D_ENABLE (ieee))Dot11d_Reset (ieee); ieee->state =IEEE80211_NOLINK ;
@@ -2508,9 +2508,9 @@ void ieee80211_start_protocol(struct ieee80211_device *ieee)// ieee->set_chan(ieee->dev,ieee->current_network.channel); for (i =0 ; i <17 ; i++) { - ieee->last_rxseq_num[i] =-1 ; - ieee->last_rxfrag_num[i] =-1 ; - ieee->last_packet_time[i] =0 ; + ieee->last_rxseq_num[i] =-1 ; + ieee->last_rxfrag_num[i] =-1 ; + ieee->last_packet_time[i] =0 ; } ieee->init_wmmparam_flag =0 ;//reinitialize AC_xx_PARAM registers.
@@ -2968,14 +2968,14 @@ SendDisassociation(struct ieee80211_device *ieee,u8 asRsn ) { -struct ieee80211_network *beacon = &ieee->current_network; -struct sk_buff *skb; +struct ieee80211_network *beacon = &ieee->current_network; +struct sk_buff *skb; - skb =ieee80211_disassociate_skb (beacon, ieee, asRsn); -if (skb) { -softmac_mgmt_xmit (skb, ieee); -//dev_kfree_skb_any(skb);//edit by thomas - } + skb =ieee80211_disassociate_skb (beacon, ieee, asRsn); +if (skb) { +softmac_mgmt_xmit (skb, ieee); +//dev_kfree_skb_any(skb);//edit by thomas + } }EXPORT_SYMBOL (SendDisassociation);
Signature · 1 line
2.18.0