clk: fix apss cpu overclocking
Subsystems (3)
PATCH 1/1 clk: fix apss cpu overclocking
From: Christian Lamparter <[email protected]>
There's an interaction issue between the clk changes:"
clk: qcom: ipq4019: Add the apss cpu pll divider clock node
clk: qcom: ipq4019: remove fixed clocks and add pll clocks " and the cpufreq-dt.
cpufreq-dt is now spamming the kernel-log with the following:
[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP
for freq 761142857 (-34)
This only happens on certain devices like the Compex WPJ428 and AVM FritzBox!4040. However, other devices like the Asus RT-AC58U and Meraki MR33 work just fine.
The issue stem from the fact that all higher CPU-Clocks are achieved by switching the clock-parent to the P_DDRPLLAPSS (ddrpllapss). Which is set by Qualcomm's proprietary bootcode as part of the DDR calibration.
For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked at round 533 MHz (ddrpllsdcc = 190285714 Hz).
whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz).
This patch attempts to fix the issue by modifying clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate() to use a new qcom_find_freq_close() function, which returns the closest matching frequency, instead of the next higher. This way, the SoC in the FB4040 (with its max clock speed of 710.4 MHz) will no longer try to overclock to 761 MHz.
--- drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++--- 1 file changed, 31 insertions(+), 3 deletions(-)
drivers/clk/qcom/gcc-ipq4019.c +31 -3
@@ -1253,6 +1253,29 @@ static const struct clk_fepll_vco gcc_fepll_vco = { .reg = 0x2f020, }; + +const struct freq_tbl *qcom_find_freq_close (const struct freq_tbl *f, +unsigned long rate) +{ +const struct freq_tbl *last =NULL ; + +for ( ; f->freq; f++) { +if (rate == f->freq) +return f; + +if (f->freq > rate) { +if (!last || + (f->freq - rate) < (rate - last->freq)) +return f; +else +return last; + } + last = f; + } + +return last; +} +/* * Round rate function for APSS CPU PLL Clock divider. * It looks up the frequency table and returns the next higher frequency
@@ -1265,7 +1288,7 @@ static long clk_cpu_div_round_rate(struct clk_hw *hw, unsigned long rate,struct clk_hw *p_hw;const struct freq_tbl *f; - f =qcom_find_freq (pll->freq_tbl, rate); + f =qcom_find_freq_close (pll->freq_tbl, rate);if (!f)return -EINVAL ;
@@ -1288,7 +1311,7 @@ static int clk_cpu_div_set_rate(struct clk_hw *hw, unsigned long rate,u32 mask;int ret; - f =qcom_find_freq (pll->freq_tbl, rate); + f =qcom_find_freq_close (pll->freq_tbl, rate);if (!f)return -EINVAL ;
@@ -1315,6 +1338,7 @@ static unsigned long clk_cpu_div_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { + const struct freq_tbl *f;struct clk_fepll *pll =to_clk_fepll (hw);u32 cdiv, pre_div;u64 rate;
@@ -1335,7 +1359,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *hw, rate =clk_fepll_vco_calc_rate (pll, parent_rate) *2 ;do_div (rate, pre_div); -return rate; + f =qcom_find_freq_close (pll->freq_tbl, rate); +if (!f) +return rate; + +return f->freq; };static const struct clk_ops clk_regmap_cpu_div_ops = {
Signature · 1 line
2.11.0
Stephen Boyd
maintainerQuoting John Crispin (2018-07-23 07:23:14)
Quoted 31 lines
From: Christian Lamparter <[email protected]> =
There's an interaction issue between the clk changes:"
clk: qcom: ipq4019: Add the apss cpu pll divider clock node
clk: qcom: ipq4019: remove fixed clocks and add pll clocks " and the cpufreq-dt.
=cpufreq-dt is now spamming the kernel-log with the following:
=[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPPfor freq 761142857 (-34)
=This only happens on certain devices like the Compex WPJ428 and AVM FritzBox!4040. However, other devices like the Asus RT-AC58U and Meraki MR33 work just fine.
=The issue stem from the fact that all higher CPU-Clocks are achieved by switching the clock-parent to the
P_DDRPLLAPSS(ddrpllapss). Which is set by Qualcomm's proprietary bootcode as part of the DDR calibration.
=For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked at round 533 MHz (ddrpllsdcc =3D 190285714 Hz).
=
Quoted 6 lines
whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is clocked at a slightly higher 537 MHz ( ddrpllsdcc =3D 192000000 Hz). =
This patch attempts to fix the issue by modifying
clk_cpu_div_round_rate(),clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate=
()
Quoted 7 lines
to use a new
qcom_find_freq_close()function, which returns the closest matching frequency, instead of the next higher. This way, the SoC in the FB4040 (with its max clock speed of 710.4 MHz) will no longer try to overclock to 761 MHz.
=Fixes d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clo=
ck node")
Quoted 2 lines
Signed-off-by Christian Lamparter <[email protected]>Signed-off-by John Crispin <[email protected]>
Why can't you specify the right frequency in the OPP tables?