drm/dp: add extended receiver capability field present bit
Subsystems (3)
PATCH 1/2 drm/dp: add extended receiver capability field present bit
From: Matt Atwood <[email protected]>
This bit was added to DP Training Aux RD interval with DP 1.3. Via descriptiion of the spec this field indicates the panels true capabilities are described in DPCD address space 02200h through 022FFh.
v2: version comment update
v3: version comment correction, commit message update
v4: white space correction
--- include/drm/drm_dp_helper.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
include/drm/drm_dp_helper.h +3 -2
@@ -123,8 +123,9 @@# define DP_FRAMING_CHANGE_CAP (1 << 1)# define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3)/* edp v1.2 or higher */ -#define DP_TRAINING_AUX_RD_INTERVAL 0x00e/* XXX 1.2? */ -# define DP_TRAINING_AUX_RD_MASK 0x7F/* XXX 1.2? */ +#define DP_TRAINING_AUX_RD_INTERVAL 0x00e/* XXX 1.2? */ +# define DP_TRAINING_AUX_RD_MASK 0x7F/* DP 1.3 */ +# define DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT (1 << 7)/* DP 1.3 */ #define DP_ADAPTER_CAP 0x00f/* 1.2 */ # define DP_FORCE_LOAD_SENSE_CAP (1 << 0)
Signature · 6 lines
2.17.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/2 drm/i915: implement EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT
From: Matt Atwood <[email protected]>
According to DP spec (2.9.3.1 of DP 1.4) if EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT is set the addresses in DPCD 02200h through 0220Fh shall contain the DPRX's true capability. These values will match 00000h through 0000Fh, except for DPCD_REV, MAX_LINK_RATE, DOWN_STREAM_PORT_PRESENT.
Read from DPCD once for all 3 values as this is an expensive operation. Spec mentions that all of address space 02200h through 0220Fh should contain the right information however currently only 3 values can differ.
There is no address space in the intel_dp->dpcd struct for addresses 02200h through 0220Fh, and since so much of the data is a identical, simply overwrite the values stored in 00000h through 0000Fh with the values that can be overwritten from addresses 02200h through 0220Fh.
This patch helps with backward compatibility for devices pre DP1.3.
v2: read only dpcd values which can be affected, remove incorrect check, split into drm include changes into separate patch, commit message, verbose debugging statements during overwrite.
v3: white space fixes
v4: make path dependent on DPCD revision > 1.2
v5: split into function, removed DPCD rev check
--- drivers/gpu/drm/i915/intel_dp.c | 54 +++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +54 -0
@@ -3731,6 +3731,58 @@ intel_dp_link_down(struct intel_encoder *encoder, } } +static void +intel_dp_extended_receiver_capabilities (struct intel_dp *intel_dp) +{ +/* +* Prior to DP1.3 the bit represented by +* DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved. +* if it is set DP_DPCD_REV at 0000h could be at a value less than +* the true capability of the panel. The only way to check is to +* then compare 0000h and 2200h. +*/ +if (intel_dp->dpcd[DP_TRAINING_AUX_RD_INTERVAL ] & +DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT ) { +uint8_t dpcd_ext[6 ]; + +DRM_DEBUG_KMS ("DPCD: Extended Receiver Capability Field Present, accessing 02200h through 022FFh\n" ); + +if (drm_dp_dpcd_read (&intel_dp->aux,DP_DP13_DPCD_REV , + &dpcd_ext,sizeof (dpcd_ext)) <0 ) +return ; + +if (intel_dp->dpcd[DP_DPCD_REV ] > dpcd_ext[DP_DPCD_REV ]) +return ; + +if (memcmp (&intel_dp->dpcd[DP_DPCD_REV ], &dpcd_ext[DP_DPCD_REV ], +sizeof (u8))) { +DRM_DEBUG_KMS ("DPCD: new value for DPCD Revision previous value %2x new value %2x\n" , + intel_dp->dpcd[DP_DPCD_REV ], + dpcd_ext[DP_DPCD_REV ]); +memcpy (&intel_dp->dpcd[DP_DPCD_REV ], + &dpcd_ext[DP_DPCD_REV ],sizeof (u8)); + } +if (memcmp (&intel_dp->dpcd[DP_MAX_LINK_RATE ], + &dpcd_ext[DP_MAX_LINK_RATE ],sizeof (u8))) { +DRM_DEBUG_KMS ("DPCD: new value for DPCD Max Link Rate previous value %2x new value %2x\n" , + intel_dp->dpcd[DP_MAX_LINK_RATE ], + dpcd_ext[DP_MAX_LINK_RATE ]); +memcpy (&intel_dp->dpcd[DP_MAX_LINK_RATE ], + &dpcd_ext[DP_MAX_LINK_RATE ],sizeof (u8)); + } +if (memcmp (&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT ], + &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT ],sizeof (u8))) { +DRM_DEBUG_KMS ("DPCD: new value for DPCD Downstream Port Present previous value %2x new value %2x\n" , + intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT ], + dpcd_ext[DP_DOWNSTREAMPORT_PRESENT ]); +memcpy (&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT ], + &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT ], +sizeof (u8)); + } + } +} + +bool intel_dp_read_dpcd (struct intel_dp *intel_dp) {
@@ -3738,6 +3790,8 @@ intel_dp_read_dpcd(struct intel_dp *intel_dp) sizeof(intel_dp->dpcd)) < 0)return false;/* aux transfer failed */ +intel_dp_extended_receiver_capabilities (intel_dp); +DRM_DEBUG_KMS ("DPCD: %*ph\n" , (int )sizeof (intel_dp->dpcd), intel_dp->dpcd);return intel_dp->dpcd[DP_DPCD_REV ] !=0 ;
Signature · 6 lines
2.17.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Rodrigo Vivi
maintainerRe: [PATCH 2/2] drm/i915: implement EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT
Quoted 48 lines · On Mon, Jul 23, 2018 at 02:27:35PM -0700, [email protected] wrote:
From: Matt Atwood <[email protected]>
According to DP spec (2.9.3.1 of DP 1.4) if
EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENTis set the addresses in DPCD 02200h through 0220Fh shall contain the DPRX's true capability. These values will match 00000h through 0000Fh, except forDPCD_REV,MAX_LINK_RATE,DOWN_STREAM_PORT_PRESENT.Read from DPCD once for all 3 values as this is an expensive operation. Spec mentions that all of address space 02200h through 0220Fh should contain the right information however currently only 3 values can differ.
There is no address space in the
intel_dp->dpcdstruct for addresses 02200h through 0220Fh, and since so much of the data is a identical, simply overwrite the values stored in 00000h through 0000Fh with the values that can be overwritten from addresses 02200h through 0220Fh.This patch helps with backward compatibility for devices pre DP1.3.
v2: read only dpcd values which can be affected, remove incorrect check, split into drm include changes into separate patch, commit message, verbose debugging statements during overwrite.
v3: white space fixes
v4: make path dependent on DPCD revision > 1.2
v5: split into function, removed DPCD rev checkSigned-off-by Matt Atwood <[email protected]>--- drivers/gpu/drm/i915/intel_dp.c | 54 +++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+)drivers/gpu/drm/i915/intel_dp.c +8
-0@@ -3731,6 +3731,58 @@ intel_dp_link_down(struct intel_encoder *encoder, } } +static void +intel_dp_extended_receiver_capabilities (struct intel_dp *intel_dp) +{ +/* +* Prior to DP1.3 the bit represented by +* DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved. +* if it is set DP_DPCD_REV at 0000h could be at a value less than +* the true capability of the panel. The only way to check is to
drivers/gpu/drm/i915/intel_dp.c intel_dp_link_down(struct intel_encoder *encoder, · line 3751
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp.c +10
-0+* then compare 0000h and 2200h. +*/ +if (intel_dp->dpcd[DP_TRAINING_AUX_RD_INTERVAL ] & +DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT ) { +uint8_t dpcd_ext[6 ]; + +DRM_DEBUG_KMS ("DPCD: Extended Receiver Capability Field Present, accessing 02200h through 022FFh\n" ); + +if (drm_dp_dpcd_read (&intel_dp->aux,DP_DP13_DPCD_REV , + &dpcd_ext,sizeof (dpcd_ext)) <0 )
DRM_ERROR
drivers/gpu/drm/i915/intel_dp.c intel_dp_link_down(struct intel_encoder *encoder, · line 3754
Quoted 3 lines
drivers/gpu/drm/i915/intel_dp.c +3
-0+return ; + +if (intel_dp->dpcd[DP_DPCD_REV ] > dpcd_ext[DP_DPCD_REV ])
DRM_DEBUG_KMS
drivers/gpu/drm/i915/intel_dp.c intel_dp_link_down(struct intel_encoder *encoder, · line 3755
Quoted 1 line
drivers/gpu/drm/i915/intel_dp.c +1
-0+return ;
The silent skip will be hard to debug and we will never know where it went wrong.
Quoted 49 lines
drivers/gpu/drm/i915/intel_dp.c +32
-0+ +if (memcmp (&intel_dp->dpcd[DP_DPCD_REV ], &dpcd_ext[DP_DPCD_REV ], +sizeof (u8))) { +DRM_DEBUG_KMS ("DPCD: new value for DPCD Revision previous value %2x new value %2x\n" , + intel_dp->dpcd[DP_DPCD_REV ], + dpcd_ext[DP_DPCD_REV ]); +memcpy (&intel_dp->dpcd[DP_DPCD_REV ], + &dpcd_ext[DP_DPCD_REV ],sizeof (u8)); + } +if (memcmp (&intel_dp->dpcd[DP_MAX_LINK_RATE ], + &dpcd_ext[DP_MAX_LINK_RATE ],sizeof (u8))) { +DRM_DEBUG_KMS ("DPCD: new value for DPCD Max Link Rate previous value %2x new value %2x\n" , + intel_dp->dpcd[DP_MAX_LINK_RATE ], + dpcd_ext[DP_MAX_LINK_RATE ]); +memcpy (&intel_dp->dpcd[DP_MAX_LINK_RATE ], + &dpcd_ext[DP_MAX_LINK_RATE ],sizeof (u8)); + } +if (memcmp (&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT ], + &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT ],sizeof (u8))) { +DRM_DEBUG_KMS ("DPCD: new value for DPCD Downstream Port Present previous value %2x new value %2x\n" , + intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT ], + dpcd_ext[DP_DOWNSTREAMPORT_PRESENT ]); +memcpy (&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT ], + &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT ], +sizeof (u8)); + } + } +} + +bool intel_dp_read_dpcd (struct intel_dp *intel_dp) {@@ -3738,6 +3790,8 @@ intel_dp_read_dpcd(struct intel_dp *intel_dp) sizeof(intel_dp->dpcd)) < 0)return false;/* aux transfer failed */ +intel_dp_extended_receiver_capabilities (intel_dp); +DRM_DEBUG_KMS ("DPCD: %*ph\n" , (int )sizeof (intel_dp->dpcd), intel_dp->dpcd);return intel_dp->dpcd[DP_DPCD_REV ] !=0 ;Signature · 6 lines
2.17.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerRe: [PATCH 2/2] drm/i915: implement EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT
In reply to [email protected]Quoted 52 lines · On Mon, Jul 23, 2018 at 02:27:35PM -0700, [email protected] wrote:
From: Matt Atwood <[email protected]>
According to DP spec (2.9.3.1 of DP 1.4) if
EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENTis set the addresses in DPCD 02200h through 0220Fh shall contain the DPRX's true capability. These values will match 00000h through 0000Fh, except forDPCD_REV,MAX_LINK_RATE,DOWN_STREAM_PORT_PRESENT.Read from DPCD once for all 3 values as this is an expensive operation. Spec mentions that all of address space 02200h through 0220Fh should contain the right information however currently only 3 values can differ.
There is no address space in the
intel_dp->dpcdstruct for addresses 02200h through 0220Fh, and since so much of the data is a identical, simply overwrite the values stored in 00000h through 0000Fh with the values that can be overwritten from addresses 02200h through 0220Fh.This patch helps with backward compatibility for devices pre DP1.3.
v2: read only dpcd values which can be affected, remove incorrect check, split into drm include changes into separate patch, commit message, verbose debugging statements during overwrite.
v3: white space fixes
v4: make path dependent on DPCD revision > 1.2
v5: split into function, removed DPCD rev checkSigned-off-by Matt Atwood <[email protected]>--- drivers/gpu/drm/i915/intel_dp.c | 54 +++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+)drivers/gpu/drm/i915/intel_dp.c +12
-0@@ -3731,6 +3731,58 @@ intel_dp_link_down(struct intel_encoder *encoder, } } +static void +intel_dp_extended_receiver_capabilities (struct intel_dp *intel_dp) +{ +/* +* Prior to DP1.3 the bit represented by +* DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved. +* if it is set DP_DPCD_REV at 0000h could be at a value less than +* the true capability of the panel. The only way to check is to +* then compare 0000h and 2200h. +*/ +if (intel_dp->dpcd[DP_TRAINING_AUX_RD_INTERVAL ] & +DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT ) {
drivers/gpu/drm/i915/intel_dp.c intel_dp_link_down(struct intel_encoder *encoder, · line 3755
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp.c +10
-0+uint8_t dpcd_ext[6 ]; + +DRM_DEBUG_KMS ("DPCD: Extended Receiver Capability Field Present, accessing 02200h through 022FFh\n" ); + +if (drm_dp_dpcd_read (&intel_dp->aux,DP_DP13_DPCD_REV , + &dpcd_ext,sizeof (dpcd_ext)) <0 ) +return ; + +if (intel_dp->dpcd[DP_DPCD_REV ] > dpcd_ext[DP_DPCD_REV ]) +return ;
I'm still missing the debug messages here and above...
Quoted 45 lines
drivers/gpu/drm/i915/intel_dp.c +32
-0+ +if (memcmp (&intel_dp->dpcd[DP_DPCD_REV ], &dpcd_ext[DP_DPCD_REV ], +sizeof (u8))) { +DRM_DEBUG_KMS ("DPCD: new value for DPCD Revision previous value %2x new value %2x\n" , + intel_dp->dpcd[DP_DPCD_REV ], + dpcd_ext[DP_DPCD_REV ]); +memcpy (&intel_dp->dpcd[DP_DPCD_REV ], + &dpcd_ext[DP_DPCD_REV ],sizeof (u8)); + } +if (memcmp (&intel_dp->dpcd[DP_MAX_LINK_RATE ], + &dpcd_ext[DP_MAX_LINK_RATE ],sizeof (u8))) { +DRM_DEBUG_KMS ("DPCD: new value for DPCD Max Link Rate previous value %2x new value %2x\n" , + intel_dp->dpcd[DP_MAX_LINK_RATE ], + dpcd_ext[DP_MAX_LINK_RATE ]); +memcpy (&intel_dp->dpcd[DP_MAX_LINK_RATE ], + &dpcd_ext[DP_MAX_LINK_RATE ],sizeof (u8)); + } +if (memcmp (&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT ], + &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT ],sizeof (u8))) { +DRM_DEBUG_KMS ("DPCD: new value for DPCD Downstream Port Present previous value %2x new value %2x\n" , + intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT ], + dpcd_ext[DP_DOWNSTREAMPORT_PRESENT ]); +memcpy (&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT ], + &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT ], +sizeof (u8)); + } + } +} + +bool intel_dp_read_dpcd (struct intel_dp *intel_dp) {@@ -3738,6 +3790,8 @@ intel_dp_read_dpcd(struct intel_dp *intel_dp) sizeof(intel_dp->dpcd)) < 0)return false;/* aux transfer failed */ +intel_dp_extended_receiver_capabilities (intel_dp); +DRM_DEBUG_KMS ("DPCD: %*ph\n" , (int )sizeof (intel_dp->dpcd), intel_dp->dpcd);return intel_dp->dpcd[DP_DPCD_REV ] !=0 ;Signature · 1 line
2.17.1
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/dp: add extended receiver capability field present bit
In reply to [email protected]== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/dp: add extended receiver capability field present bit
URL : https://patchwork.freedesktop.org/series/47087/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 6492b69821b5 drm/dp: add extended receiver capability field present bit 23a1b7942026 drm/i915: implement EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT -:93: CHECK:LINE_SPACING: Please don't use multiple blank lines #93: FILE: drivers/gpu/drm/i915/intel_dp.c:3748: + +
total: 0 errors, 0 warnings, 1 checks, 66 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [1/2] drm/dp: add extended receiver capability field present bit
In reply to [email protected]== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/dp: add extended receiver capability field present bit
URL : https://patchwork.freedesktop.org/series/47087/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4530 -> Patchwork_9753 =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/47087/revisions/1/mbox/
== Known issues ==
Here are the changes found in Patchwork_9753 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@drv_module_reload@basic-reload-inject:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106248, fdo#106725)
igt@kms_flip@basic-flip-vs-modeset:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106000)
==== Possible fixes ====
igt@debugfs_test@read_all_entries:
fi-snb-2520m: INCOMPLETE (fdo#103713) -> PASS
igt@drv_selftest@live_workarounds:
fi-skl-6700hq: DMESG-FAIL (fdo#107292) -> PASS
igt@gem_exec_suspend@basic-s3:
fi-glk-j4005: DMESG-WARN (fdo#106097) -> PASS
igt@kms_chamelium@dp-edid-read:
fi-kbl-7500u: FAIL (fdo#103841) -> PASS
igt@kms_flip@basic-flip-vs-wf_vblank:
fi-glk-dsi: FAIL (fdo#100368) -> PASS fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#103841 https://bugs.freedesktop.org/show_bug.cgi?id=103841
fdo#106000 https://bugs.freedesktop.org/show_bug.cgi?id=106000
fdo#106097 https://bugs.freedesktop.org/show_bug.cgi?id=106097
fdo#106248 https://bugs.freedesktop.org/show_bug.cgi?id=106248
fdo#106725 https://bugs.freedesktop.org/show_bug.cgi?id=106725
fdo#107292 https://bugs.freedesktop.org/show_bug.cgi?id=107292
== Participating hosts (50 -> 43) ==
Missing (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-skl-caroline fi-byt-clapper
== Build changes ==
* Linux: CI_DRM_4530 -> Patchwork_9753
CI_DRM_4530: d27cc4a37a5cc1ef14a3aafdcb6682e5f6a85d09 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4571: 65fccc149b85968cdce4737266b056059c1510f3 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9753: 23a1b794202633961ad336e9f57c1ba6cb184d93 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
23a1b7942026 drm/i915: implement EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT 6492b69821b5 drm/dp: add extended receiver capability field present bit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9753/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for series starting with [1/2] drm/dp: add extended receiver capability field present bit
In reply to [email protected]== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/dp: add extended receiver capability field present bit
URL : https://patchwork.freedesktop.org/series/47087/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4530_full -> Patchwork_9753_full =
== Summary - WARNING ==
Minor unknown changes coming with Patchwork_9753_full need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_9753_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_9753_full:
=== IGT changes ===
==== Warnings ====
igt@gem_exec_schedule@deep-bsd2:
shard-kbl: PASS -> SKIP +1== Known issues ==
Here are the changes found in Patchwork_9753_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_flip@plain-flip-fb-recreate:
shard-hsw: PASS -> FAIL (fdo#100368)
==== Possible fixes ====
igt@kms_flip@2x-dpms-vs-vblank-race-interruptible:
shard-hsw: FAIL (fdo#103060) -> PASS
igt@kms_flip@2x-flip-vs-wf_vblank:
shard-glk: FAIL (fdo#100368) -> PASS
igt@perf_pmu@rc6-runtime-pm-long:
shard-kbl: FAIL (fdo#105010) -> PASS fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#105010 https://bugs.freedesktop.org/show_bug.cgi?id=105010
== Participating hosts (5 -> 5) ==
No changes in participating hosts
== Build changes ==
* Linux: CI_DRM_4530 -> Patchwork_9753
CI_DRM_4530: d27cc4a37a5cc1ef14a3aafdcb6682e5f6a85d09 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4571: 65fccc149b85968cdce4737266b056059c1510f3 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9753: 23a1b794202633961ad336e9f57c1ba6cb184d93 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9753/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerQuoted 9 lines · On Mon, Jul 23, 2018 at 02:27:34PM -0700, [email protected] wrote:
From: Matt Atwood <[email protected]>
This bit was added to DP Training Aux RD interval with DP 1.3. Via descriptiion of the spec this field indicates the panels true capabilities are described in DPCD address space 02200h through 022FFh.
v2: version comment update
v3: version comment correction, commit message update
v4: white space correction
I'm afraid the wrong space that I had mentioned it is still there s/"(1 << 7)/* DP 1.3 */"/"(1 << 7) /* DP 1.3 *"/g
Quoted 11 lines
Signed-off-by Matt Atwood <[email protected]>--- include/drm/drm_dp_helper.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)include/drm/drm_dp_helper.h +0
-0
include/drm/drm_dp_helper.h line 128
Quoted 8 lines
include/drm/drm_dp_helper.h +3
-2@@ -123,8 +123,9 @@# define DP_FRAMING_CHANGE_CAP (1 << 1)# define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3)/* edp v1.2 or higher */ -#define DP_TRAINING_AUX_RD_INTERVAL 0x00e/* XXX 1.2? */ -# define DP_TRAINING_AUX_RD_MASK 0x7F/* XXX 1.2? */ +#define DP_TRAINING_AUX_RD_INTERVAL 0x00e/* XXX 1.2? */ +# define DP_TRAINING_AUX_RD_MASK 0x7F/* DP 1.3 */ +# define DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT (1 << 7)/* DP 1.3 */
^ here
Quoted 6 lines
include/drm/drm_dp_helper.h +0
-0#define DP_ADAPTER_CAP 0x00f/* 1.2 */ # define DP_FORCE_LOAD_SENSE_CAP (1 << 0)Signature · 1 line
2.17.1
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 20 lines · On Mon, Jul 23, 2018 at 02:27:34PM -0700, [email protected] wrote:
From: Matt Atwood <[email protected]>
This bit was added to DP Training Aux RD interval with DP 1.3. Via descriptiion of the spec this field indicates the panels true capabilities are described in DPCD address space 02200h through 022FFh.
v2: version comment update
v3: version comment correction, commit message update
v4: white space correctionSigned-off-by Matt Atwood <[email protected]>--- include/drm/drm_dp_helper.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)include/drm/drm_dp_helper.h +0
-0
include/drm/drm_dp_helper.h line 128
Quoted 8 lines
include/drm/drm_dp_helper.h +3
-2@@ -123,8 +123,9 @@# define DP_FRAMING_CHANGE_CAP (1 << 1)# define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3)/* edp v1.2 or higher */ -#define DP_TRAINING_AUX_RD_INTERVAL 0x00e/* XXX 1.2? */ -# define DP_TRAINING_AUX_RD_MASK 0x7F/* XXX 1.2? */ +#define DP_TRAINING_AUX_RD_INTERVAL 0x00e/* XXX 1.2? */ +# define DP_TRAINING_AUX_RD_MASK 0x7F/* DP 1.3 */ +# define DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT (1 << 7)/* DP 1.3 */
With the fix mentioned by Rodrigo about having a space as below:
# define DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT (1 << 7) /* DP 1.3 */
Manasi
Quoted 6 lines
include/drm/drm_dp_helper.h +0
-0#define DP_ADAPTER_CAP 0x00f/* 1.2 */ # define DP_FORCE_LOAD_SENSE_CAP (1 << 0)Signature · 1 line
2.17.1
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Manasi Navare
AppliedPushed to drm-misc-next with the whitespace fix.
Thanks for the patch.
Regards
Manasi
Quoted 34 lines · On Mon, Jul 23, 2018 at 02:27:34PM -0700, [email protected] wrote:
From: Matt Atwood <[email protected]>
This bit was added to DP Training Aux RD interval with DP 1.3. Via descriptiion of the spec this field indicates the panels true capabilities are described in DPCD address space 02200h through 022FFh.
v2: version comment update
v3: version comment correction, commit message update
v4: white space correctionSigned-off-by Matt Atwood <[email protected]>--- include/drm/drm_dp_helper.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)include/drm/drm_dp_helper.h +3
-2@@ -123,8 +123,9 @@# define DP_FRAMING_CHANGE_CAP (1 << 1)# define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3)/* edp v1.2 or higher */ -#define DP_TRAINING_AUX_RD_INTERVAL 0x00e/* XXX 1.2? */ -# define DP_TRAINING_AUX_RD_MASK 0x7F/* XXX 1.2? */ +#define DP_TRAINING_AUX_RD_INTERVAL 0x00e/* XXX 1.2? */ +# define DP_TRAINING_AUX_RD_MASK 0x7F/* DP 1.3 */ +# define DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT (1 << 7)/* DP 1.3 */ #define DP_ADAPTER_CAP 0x00f/* 1.2 */ # define DP_FORCE_LOAD_SENSE_CAP (1 << 0)Signature · 1 line
2.17.1
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx