Skip to contentSkip to conversation

Decode memdev info and bandwidth and implemnt latency WA

PATCH Superseded Mahesh Kumar 4 participants 26 messages Jul 26, 2018 – Aug 22, 2018

Subsystems (2)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

cover Decode memdev info and bandwidth and implemnt latency WA

This series adds support to calculate system memdev parameters and calculate total system memory bandwidth. This parameters and BW will be used to enable WM level-0 latency workaround and display memory bandwidth related WA for gen9.

while we are here to enable IPC based on memory configuration lets also make sure that we override IPC value set of BIOS incase we decide to disable IPC in KMS.

Mahesh Kumar (5):
drm/i915/bxt: Decode memory bandwidth and parameters drm/i915/skl+: Decode memory bandwidth and parameters drm/i915: Implement 16GB dimm wa for latency level-0 drm/i915/kbl+: Enable IPC only for symmetric memory configurations drm/i915/skl+: don't trust IPC value set by BIOS

 drivers/gpu/drm/i915/i915_drv.c | 308 ++++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_drv.h |  22 +++
 drivers/gpu/drm/i915/i915_reg.h |  51 +++++++
 drivers/gpu/drm/i915/intel_pm.c |  17 ++-
 4 files changed, 395 insertions(+), 3 deletions(-)
Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 1/5 drm/i915/bxt: Decode memory bandwidth and parameters

This patch adds support to decode system memory bandwidth and other parameters for broxton platform, which will be used for arbitrated display memory bandwidth calculation in GEN9 based platforms and WM latency level-0 Work-around calculation on GEN9+ platforms.

Changes since V1:
- s/memdev_info/dram_info

---
 drivers/gpu/drm/i915/i915_drv.c | 116 ++++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_drv.h |  11 ++++
 drivers/gpu/drm/i915/i915_reg.h |  30 +++++++++++
 3 files changed, 157 insertions(+)
drivers/gpu/drm/i915/i915_drv.c +116 -0
index 18a45e7a3d7c..16629601c9f4 100644
@@ -1070,6 +1070,116 @@ static void intel_sanitize_options(struct drm_i915_private *dev_priv)
 	intel_gvt_sanitize_options(dev_priv);
 }
 
+static int
+bxt_get_dram_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	u32 dram_channels;
+	u32 mem_freq_khz, val;
+	u8 num_active_channels;
+	int i;
+
+	val = I915_READ(BXT_P_CR_MC_BIOS_REQ_0_0_0);
+	mem_freq_khz = DIV_ROUND_UP((val & BXT_REQ_DATA_MASK) *
+				    BXT_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
+
+	dram_channels = (val >> BXT_DRAM_CHANNEL_ACTIVE_SHIFT) &
+					BXT_DRAM_CHANNEL_ACTIVE_MASK;
+	num_active_channels = hweight32(dram_channels);
+
+	/* Each active bit represents 4-byte channel */
+	dram_info->bandwidth_kbps = (mem_freq_khz * num_active_channels * 4);
+
+	if (dram_info->bandwidth_kbps == 0) {
+		DRM_INFO("Couldn't get system memory bandwidth\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Now read each DUNIT8/9/10/11 to check the rank of each dimms.
+	 */
+	for (i = BXT_D_CR_DRP0_DUNIT_START; i <= BXT_D_CR_DRP0_DUNIT_END; i++) {
+		u8 rank, size, width;
+		enum dram_rank ch_rank;
+
+		val = I915_READ(BXT_D_CR_DRP0_DUNIT(i));
+		if (val == 0xFFFFFFFF)
+			continue;
+
+		dram_info->num_channels++;
+		rank = val & BXT_DRAM_RANK_MASK;
+		width = (val >> BXT_DRAM_WIDTH_SHIFT) & BXT_DRAM_WIDTH_MASK;
+		size = (val >> BXT_DRAM_SIZE_SHIFT) & BXT_DRAM_SIZE_MASK;
+		if (rank == BXT_DRAM_RANK_SINGLE)
+			ch_rank = I915_DRAM_RANK_SINGLE;
+		else if (rank == BXT_DRAM_RANK_DUAL)
+			ch_rank = I915_DRAM_RANK_DUAL;
+		else
+			ch_rank = I915_DRAM_RANK_INVALID;
+
+		if (size == BXT_DRAM_SIZE_4GB)
+			size = 4;
+		else if (size == BXT_DRAM_SIZE_6GB)
+			size = 6;
+		else if (size == BXT_DRAM_SIZE_8GB)
+			size = 8;
+		else if (size == BXT_DRAM_SIZE_12GB)
+			size = 12;
+		else if (size == BXT_DRAM_SIZE_16GB)
+			size = 16;
+		else
+			size = 0;
+
+		width = (1 << width) * 8;
+		DRM_DEBUG_KMS("dram size:%dGB width:X%d rank:%s\n", size,
+			      width, rank == BXT_DRAM_RANK_SINGLE ? "single" :
+			      rank == BXT_DRAM_RANK_DUAL ? "dual" : "unknown");
+
+		/*
+		 * If any of the channel is single rank channel,
+		 * worst case output will be same as if single rank
+		 * memory, so consider single rank memory.
+		 */
+		if (dram_info->rank == I915_DRAM_RANK_INVALID)
+			dram_info->rank = ch_rank;
+		else if (ch_rank == I915_DRAM_RANK_SINGLE)
+			dram_info->rank = I915_DRAM_RANK_SINGLE;
+	}
+
+	if (dram_info->rank == I915_DRAM_RANK_INVALID) {
+		DRM_INFO("couldn't get memory rank information\n");
+		return -EINVAL;
+	}
+
+	dram_info->valid = true;
+	return 0;
+}
+
+static void
+intel_get_dram_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	int ret;
+
+	dram_info->valid = false;
+	dram_info->rank = I915_DRAM_RANK_INVALID;
+	dram_info->bandwidth_kbps = 0;
+	dram_info->num_channels = 0;
+
+	if (!IS_BROXTON(dev_priv))
+		return;
+
+	ret = bxt_get_dram_info(dev_priv);
+	if (ret)
+		return;
+
+	DRM_DEBUG_KMS("DRAM bandwidth:%d KBps, total-channels: %u\n",
+		      dram_info->bandwidth_kbps, dram_info->num_channels);
+	DRM_DEBUG_KMS("DRAM rank: %s rank\n",
+		      (dram_info->rank == I915_DRAM_RANK_DUAL) ?
+		      "dual" : "single");
+}
+
 /**
  * i915_driver_init_hw - setup state requiring device access
  * @dev_priv: device private
@@ -1187,6 +1297,12 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
 		goto err_msi;
 
 	intel_opregion_setup(dev_priv);
+	/*
+	 * Fill the dram structure to get the system raw bandwidth and
+	 * dram info. This will be used for memory latency calculation.
+	 */
+	intel_get_dram_info(dev_priv);
+
 
 	return 0;
 
drivers/gpu/drm/i915/i915_drv.h +11 -0
index 0f49f9988dfa..46f942fa7d60 100644
@@ -1904,6 +1904,17 @@ struct drm_i915_private {
 		bool distrust_bios_wm;
 	} wm;
 
+	struct dram_info {
+		bool valid;
+		u8 num_channels;
+		enum dram_rank {
+			I915_DRAM_RANK_INVALID = 0,
+			I915_DRAM_RANK_SINGLE,
+			I915_DRAM_RANK_DUAL
+		} rank;
+		u32 bandwidth_kbps;
+	} dram_info;
+
 	struct i915_runtime_pm runtime_pm;
 
 	struct {
drivers/gpu/drm/i915/i915_reg.h +30 -0
index 5530c470f30d..66900d027570 100644
@@ -9634,6 +9634,36 @@ enum skl_power_gate {
 #define  DC_STATE_DEBUG_MASK_CORES	(1 << 0)
 #define  DC_STATE_DEBUG_MASK_MEMORY_UP	(1 << 1)
 
+#define BXT_P_CR_MC_BIOS_REQ_0_0_0	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x7114)
+#define  BXT_REQ_DATA_MASK			0x3F
+#define  BXT_DRAM_CHANNEL_ACTIVE_SHIFT		12
+#define  BXT_DRAM_CHANNEL_ACTIVE_MASK		0xF
+#define  BXT_MEMORY_FREQ_MULTIPLIER_HZ		133333333
+
+#define BXT_D_CR_DRP0_DUNIT8			0x1000
+#define BXT_D_CR_DRP0_DUNIT9			0x1200
+#define  BXT_D_CR_DRP0_DUNIT_START		8
+#define  BXT_D_CR_DRP0_DUNIT_END		11
+#define BXT_D_CR_DRP0_DUNIT(x)	_MMIO(MCHBAR_MIRROR_BASE_SNB + \
+				      _PICK_EVEN((x) - 8, BXT_D_CR_DRP0_DUNIT8,\
+						 BXT_D_CR_DRP0_DUNIT9))
+#define  BXT_DRAM_RANK_MASK			0x3
+#define  BXT_DRAM_RANK_SINGLE			0x1
+#define  BXT_DRAM_RANK_DUAL			0x3
+#define  BXT_DRAM_WIDTH_MASK			0x3
+#define  BXT_DRAM_WIDTH_SHIFT			4
+#define  BXT_DRAM_WIDTH_X8			0x0
+#define  BXT_DRAM_WIDTH_X16			0x1
+#define  BXT_DRAM_WIDTH_X32			0x2
+#define  BXT_DRAM_WIDTH_X64			0x3
+#define  BXT_DRAM_SIZE_MASK			0x7
+#define  BXT_DRAM_SIZE_SHIFT			6
+#define  BXT_DRAM_SIZE_4GB			0x0
+#define  BXT_DRAM_SIZE_6GB			0x1
+#define  BXT_DRAM_SIZE_8GB			0x2
+#define  BXT_DRAM_SIZE_12GB			0x3
+#define  BXT_DRAM_SIZE_16GB			0x4
+
 /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
  * since on HSW we can't write to it using I915_WRITE. */
 #define D_COMP_HSW			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#2 lore raw

Re: [PATCH 1/5] drm/i915/bxt: Decode memory bandwidth and parameters

Quoted 47 lines · Mahesh Kumar

This patch adds support to decode system memory bandwidth and other parameters for broxton platform, which will be used for arbitrated display memory bandwidth calculation in GEN9 based platforms and WM latency level-0 Work-around calculation on GEN9+ platforms.

Changes since V1:
- s/memdev_info/dram_info

---
 drivers/gpu/drm/i915/i915_drv.c | 116 ++++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_drv.h |  11 ++++
 drivers/gpu/drm/i915/i915_reg.h |  30 +++++++++++
 3 files changed, 157 insertions(+)
drivers/gpu/drm/i915/i915_drv.c +24 -0
index 18a45e7a3d7c..16629601c9f4 100644
@@ -1070,6 +1070,116 @@ static void intel_sanitize_options(struct drm_i915_private *dev_priv)
 	intel_gvt_sanitize_options(dev_priv);
 }
 
+static int
+bxt_get_dram_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	u32 dram_channels;
+	u32 mem_freq_khz, val;
+	u8 num_active_channels;
+	int i;
+
+	val = I915_READ(BXT_P_CR_MC_BIOS_REQ_0_0_0);
+	mem_freq_khz = DIV_ROUND_UP((val & BXT_REQ_DATA_MASK) *
+				    BXT_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
+
+	dram_channels = (val >> BXT_DRAM_CHANNEL_ACTIVE_SHIFT) &
+					BXT_DRAM_CHANNEL_ACTIVE_MASK;
+	num_active_channels = hweight32(dram_channels);
+
+	/* Each active bit represents 4-byte channel */
+	dram_info->bandwidth_kbps = (mem_freq_khz * num_active_channels * 4);
+
+	if (dram_info->bandwidth_kbps == 0) {
+		DRM_INFO("Couldn't get system memory bandwidth\n");
+		return -EINVAL;
+	}

drivers/gpu/drm/i915/i915_drv.c static void intel_sanitize_options(struct drm_i915_private *dev_priv) · line 1106

Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +10 -0
+
+	/*
+	 * Now read each DUNIT8/9/10/11 to check the rank of each dimms.
+	 */
+	for (i = BXT_D_CR_DRP0_DUNIT_START; i <= BXT_D_CR_DRP0_DUNIT_END; i++) {
+		u8 rank, size, width;
+		enum dram_rank ch_rank;
+
+		val = I915_READ(BXT_D_CR_DRP0_DUNIT(i));
+		if (val == 0xFFFFFFFF)

why? any spec or any comment here?

Quoted 15 lines
drivers/gpu/drm/i915/i915_drv.c +15 -0
+			continue;
+
+		dram_info->num_channels++;
+		rank = val & BXT_DRAM_RANK_MASK;
+		width = (val >> BXT_DRAM_WIDTH_SHIFT) & BXT_DRAM_WIDTH_MASK;
+		size = (val >> BXT_DRAM_SIZE_SHIFT) & BXT_DRAM_SIZE_MASK;
+		if (rank == BXT_DRAM_RANK_SINGLE)
+			ch_rank = I915_DRAM_RANK_SINGLE;
+		else if (rank == BXT_DRAM_RANK_DUAL)
+			ch_rank = I915_DRAM_RANK_DUAL;
+		else
+			ch_rank = I915_DRAM_RANK_INVALID;
+
+		if (size == BXT_DRAM_SIZE_4GB)
+			size = 4;

drivers/gpu/drm/i915/i915_drv.c static void intel_sanitize_options(struct drm_i915_private *dev_priv) · line 1131

Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +10 -0
+		else if (size == BXT_DRAM_SIZE_6GB)
+			size = 6;
+		else if (size == BXT_DRAM_SIZE_8GB)
+			size = 8;
+		else if (size == BXT_DRAM_SIZE_12GB)
+			size = 12;
+		else if (size == BXT_DRAM_SIZE_16GB)
+			size = 16;
+		else
+			size = 0;

switch case? or define these BXT_DRAM_SIZE with enums?

Quoted 29 lines
drivers/gpu/drm/i915/i915_drv.c +29 -0
+
+		width = (1 << width) * 8;
+		DRM_DEBUG_KMS("dram size:%dGB width:X%d rank:%s\n", size,
+			      width, rank == BXT_DRAM_RANK_SINGLE ? "single" :
+			      rank == BXT_DRAM_RANK_DUAL ? "dual" : "unknown");
+
+		/*
+		 * If any of the channel is single rank channel,
+		 * worst case output will be same as if single rank
+		 * memory, so consider single rank memory.
+		 */
+		if (dram_info->rank == I915_DRAM_RANK_INVALID)
+			dram_info->rank = ch_rank;
+		else if (ch_rank == I915_DRAM_RANK_SINGLE)
+			dram_info->rank = I915_DRAM_RANK_SINGLE;
+	}
+
+	if (dram_info->rank == I915_DRAM_RANK_INVALID) {
+		DRM_INFO("couldn't get memory rank information\n");
+		return -EINVAL;
+	}
+
+	dram_info->valid = true;
+	return 0;
+}
+
+static void
+intel_get_dram_info(struct drm_i915_private *dev_priv)
+{

drivers/gpu/drm/i915/i915_drv.c static void intel_sanitize_options(struct drm_i915_private *dev_priv) · line 1170

Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +10 -0
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	int ret;
+
+	dram_info->valid = false;
+	dram_info->rank = I915_DRAM_RANK_INVALID;
+	dram_info->bandwidth_kbps = 0;
+	dram_info->num_channels = 0;
+
+	if (!IS_BROXTON(dev_priv))
+		return;

I think this should be checked earlier and probably with some macro NEED_EDRAM_INFO(dev_priv)... to prepare for other platforms

Quoted 33 lines
drivers/gpu/drm/i915/i915_drv.c +18 -0
+
+	ret = bxt_get_dram_info(dev_priv);
+	if (ret)
+		return;
+
+	DRM_DEBUG_KMS("DRAM bandwidth:%d KBps, total-channels: %u\n",
+		      dram_info->bandwidth_kbps, dram_info->num_channels);
+	DRM_DEBUG_KMS("DRAM rank: %s rank\n",
+		      (dram_info->rank == I915_DRAM_RANK_DUAL) ?
+		      "dual" : "single");
+}
+
 /**
  * i915_driver_init_hw - setup state requiring device access
  * @dev_priv: device private
@@ -1187,6 +1297,12 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
 		goto err_msi;
 
 	intel_opregion_setup(dev_priv);
+	/*
+	 * Fill the dram structure to get the system raw bandwidth and
+	 * dram info. This will be used for memory latency calculation.
+	 */
+	intel_get_dram_info(dev_priv);
+
 
 	return 0;
 
drivers/gpu/drm/i915/i915_drv.h +0 -0
index 0f49f9988dfa..46f942fa7d60 100644

drivers/gpu/drm/i915/i915_drv.h struct drm_i915_private { · line 1908

Quoted 5 lines
drivers/gpu/drm/i915/i915_drv.h +2 -0
@@ -1904,6 +1904,17 @@ struct drm_i915_private {
 		bool distrust_bios_wm;
 	} wm;
 
+	struct dram_info {
+		bool valid;

I don't think we need this duplicated and unused "valid" bool.

Quoted 39 lines
drivers/gpu/drm/i915/i915_drv.h +9 -0
+		u8 num_channels;
+		enum dram_rank {
+			I915_DRAM_RANK_INVALID = 0,
+			I915_DRAM_RANK_SINGLE,
+			I915_DRAM_RANK_DUAL
+		} rank;
+		u32 bandwidth_kbps;
+	} dram_info;
+
 	struct i915_runtime_pm runtime_pm;
 
 	struct {
drivers/gpu/drm/i915/i915_reg.h +19 -0
index 5530c470f30d..66900d027570 100644
@@ -9634,6 +9634,36 @@ enum skl_power_gate {
 #define  DC_STATE_DEBUG_MASK_CORES	(1 << 0)
 #define  DC_STATE_DEBUG_MASK_MEMORY_UP	(1 << 1)
 
+#define BXT_P_CR_MC_BIOS_REQ_0_0_0	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x7114)
+#define  BXT_REQ_DATA_MASK			0x3F
+#define  BXT_DRAM_CHANNEL_ACTIVE_SHIFT		12
+#define  BXT_DRAM_CHANNEL_ACTIVE_MASK		0xF
+#define  BXT_MEMORY_FREQ_MULTIPLIER_HZ		133333333
+
+#define BXT_D_CR_DRP0_DUNIT8			0x1000
+#define BXT_D_CR_DRP0_DUNIT9			0x1200
+#define  BXT_D_CR_DRP0_DUNIT_START		8
+#define  BXT_D_CR_DRP0_DUNIT_END		11
+#define BXT_D_CR_DRP0_DUNIT(x)	_MMIO(MCHBAR_MIRROR_BASE_SNB + \
+				      _PICK_EVEN((x) - 8, BXT_D_CR_DRP0_DUNIT8,\
+						 BXT_D_CR_DRP0_DUNIT9))
+#define  BXT_DRAM_RANK_MASK			0x3
+#define  BXT_DRAM_RANK_SINGLE			0x1
+#define  BXT_DRAM_RANK_DUAL			0x3
+#define  BXT_DRAM_WIDTH_MASK			0x3
+#define  BXT_DRAM_WIDTH_SHIFT			4
+#define  BXT_DRAM_WIDTH_X8			0x0

drivers/gpu/drm/i915/i915_reg.h enum skl_power_gate { · line 9665

Quoted 10 lines
drivers/gpu/drm/i915/i915_reg.h +10 -0
+#define  BXT_DRAM_WIDTH_X16			0x1
+#define  BXT_DRAM_WIDTH_X32			0x2
+#define  BXT_DRAM_WIDTH_X64			0x3
+#define  BXT_DRAM_SIZE_MASK			0x7
+#define  BXT_DRAM_SIZE_SHIFT			6
+#define  BXT_DRAM_SIZE_4GB			0x0
+#define  BXT_DRAM_SIZE_6GB			0x1
+#define  BXT_DRAM_SIZE_8GB			0x2
+#define  BXT_DRAM_SIZE_12GB			0x3
+#define  BXT_DRAM_SIZE_16GB			0x4

could you please share or point me to this spec?

Quoted 11 lines
drivers/gpu/drm/i915/i915_reg.h +1 -0
+
 /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
  * since on HSW we can't write to it using I915_WRITE. */
 #define D_COMP_HSW			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#3 lore raw

Re: [PATCH 1/5] drm/i915/bxt: Decode memory bandwidth and parameters

In reply to Mahesh Kumar
Quoted 176 lines · Mahesh Kumar

This patch adds support to decode system memory bandwidth and other parameters for broxton platform, which will be used for arbitrated display memory bandwidth calculation in GEN9 based platforms and WM latency level-0 Work-around calculation on GEN9+ platforms.

Changes since V1:
- s/memdev_info/dram_info

---
 drivers/gpu/drm/i915/i915_drv.c | 116 ++++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_drv.h |  11 ++++
 drivers/gpu/drm/i915/i915_reg.h |  30 +++++++++++
 3 files changed, 157 insertions(+)
drivers/gpu/drm/i915/i915_drv.c +116 -0
index 18a45e7a3d7c..16629601c9f4 100644
@@ -1070,6 +1070,116 @@ static void intel_sanitize_options(struct drm_i915_private *dev_priv)
 	intel_gvt_sanitize_options(dev_priv);
 }
 
+static int
+bxt_get_dram_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	u32 dram_channels;
+	u32 mem_freq_khz, val;
+	u8 num_active_channels;
+	int i;
+
+	val = I915_READ(BXT_P_CR_MC_BIOS_REQ_0_0_0);
+	mem_freq_khz = DIV_ROUND_UP((val & BXT_REQ_DATA_MASK) *
+				    BXT_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
+
+	dram_channels = (val >> BXT_DRAM_CHANNEL_ACTIVE_SHIFT) &
+					BXT_DRAM_CHANNEL_ACTIVE_MASK;
+	num_active_channels = hweight32(dram_channels);
+
+	/* Each active bit represents 4-byte channel */
+	dram_info->bandwidth_kbps = (mem_freq_khz * num_active_channels * 4);
+
+	if (dram_info->bandwidth_kbps == 0) {
+		DRM_INFO("Couldn't get system memory bandwidth\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Now read each DUNIT8/9/10/11 to check the rank of each dimms.
+	 */
+	for (i = BXT_D_CR_DRP0_DUNIT_START; i <= BXT_D_CR_DRP0_DUNIT_END; i++) {
+		u8 rank, size, width;
+		enum dram_rank ch_rank;
+
+		val = I915_READ(BXT_D_CR_DRP0_DUNIT(i));
+		if (val == 0xFFFFFFFF)
+			continue;
+
+		dram_info->num_channels++;
+		rank = val & BXT_DRAM_RANK_MASK;
+		width = (val >> BXT_DRAM_WIDTH_SHIFT) & BXT_DRAM_WIDTH_MASK;
+		size = (val >> BXT_DRAM_SIZE_SHIFT) & BXT_DRAM_SIZE_MASK;
+		if (rank == BXT_DRAM_RANK_SINGLE)
+			ch_rank = I915_DRAM_RANK_SINGLE;
+		else if (rank == BXT_DRAM_RANK_DUAL)
+			ch_rank = I915_DRAM_RANK_DUAL;
+		else
+			ch_rank = I915_DRAM_RANK_INVALID;
+
+		if (size == BXT_DRAM_SIZE_4GB)
+			size = 4;
+		else if (size == BXT_DRAM_SIZE_6GB)
+			size = 6;
+		else if (size == BXT_DRAM_SIZE_8GB)
+			size = 8;
+		else if (size == BXT_DRAM_SIZE_12GB)
+			size = 12;
+		else if (size == BXT_DRAM_SIZE_16GB)
+			size = 16;
+		else
+			size = 0;
+
+		width = (1 << width) * 8;
+		DRM_DEBUG_KMS("dram size:%dGB width:X%d rank:%s\n", size,
+			      width, rank == BXT_DRAM_RANK_SINGLE ? "single" :
+			      rank == BXT_DRAM_RANK_DUAL ? "dual" : "unknown");
+
+		/*
+		 * If any of the channel is single rank channel,
+		 * worst case output will be same as if single rank
+		 * memory, so consider single rank memory.
+		 */
+		if (dram_info->rank == I915_DRAM_RANK_INVALID)
+			dram_info->rank = ch_rank;
+		else if (ch_rank == I915_DRAM_RANK_SINGLE)
+			dram_info->rank = I915_DRAM_RANK_SINGLE;
+	}
+
+	if (dram_info->rank == I915_DRAM_RANK_INVALID) {
+		DRM_INFO("couldn't get memory rank information\n");
+		return -EINVAL;
+	}
+
+	dram_info->valid = true;
+	return 0;
+}
+
+static void
+intel_get_dram_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	int ret;
+
+	dram_info->valid = false;
+	dram_info->rank = I915_DRAM_RANK_INVALID;
+	dram_info->bandwidth_kbps = 0;
+	dram_info->num_channels = 0;
+
+	if (!IS_BROXTON(dev_priv))
+		return;
+
+	ret = bxt_get_dram_info(dev_priv);
+	if (ret)
+		return;
+
+	DRM_DEBUG_KMS("DRAM bandwidth:%d KBps, total-channels: %u\n",
+		      dram_info->bandwidth_kbps, dram_info->num_channels);
+	DRM_DEBUG_KMS("DRAM rank: %s rank\n",
+		      (dram_info->rank == I915_DRAM_RANK_DUAL) ?
+		      "dual" : "single");
+}
+
 /**
  * i915_driver_init_hw - setup state requiring device access
  * @dev_priv: device private
@@ -1187,6 +1297,12 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
 		goto err_msi;
 
 	intel_opregion_setup(dev_priv);
+	/*
+	 * Fill the dram structure to get the system raw bandwidth and
+	 * dram info. This will be used for memory latency calculation.
+	 */
+	intel_get_dram_info(dev_priv);
+
 
 	return 0;
 
drivers/gpu/drm/i915/i915_drv.h +11 -0
index 0f49f9988dfa..46f942fa7d60 100644
@@ -1904,6 +1904,17 @@ struct drm_i915_private {
 		bool distrust_bios_wm;
 	} wm;
 
+	struct dram_info {
+		bool valid;
+		u8 num_channels;
+		enum dram_rank {
+			I915_DRAM_RANK_INVALID = 0,
+			I915_DRAM_RANK_SINGLE,
+			I915_DRAM_RANK_DUAL
+		} rank;
+		u32 bandwidth_kbps;
+	} dram_info;
+
 	struct i915_runtime_pm runtime_pm;
 
 	struct {
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 5530c470f30d..66900d027570 100644

drivers/gpu/drm/i915/i915_reg.h enum skl_power_gate { · line 9640

Quoted 7 lines
drivers/gpu/drm/i915/i915_reg.h +4 -0
@@ -9634,6 +9634,36 @@ enum skl_power_gate {
 #define  DC_STATE_DEBUG_MASK_CORES	(1 << 0)
 #define  DC_STATE_DEBUG_MASK_MEMORY_UP	(1 << 1)
 
+#define BXT_P_CR_MC_BIOS_REQ_0_0_0	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x7114)
+#define  BXT_REQ_DATA_MASK			0x3F
+#define  BXT_DRAM_CHANNEL_ACTIVE_SHIFT		12
+#define  BXT_DRAM_CHANNEL_ACTIVE_MASK		0xF

Thanks a lot for the spec pointers. But now that I opened it and started to reading here it was hard to review and I noticed this is because the way that it is defined here doesn't respect our standards as documented:

"
* For bit fields, define a ``_MASK`` and a ``_SHIFT`` macro. Define bit field
* contents so that they are already shifted in place, and can be directly
* OR'd.
"

So please provide a new version that follows the rules and that it is easier to review. And sorry for not noticing this on yesterday's review.

Quoted 32 lines
drivers/gpu/drm/i915/i915_reg.h +26 -1
+#define  BXT_MEMORY_FREQ_MULTIPLIER_HZ		133333333
+
+#define BXT_D_CR_DRP0_DUNIT8			0x1000
+#define BXT_D_CR_DRP0_DUNIT9			0x1200
+#define  BXT_D_CR_DRP0_DUNIT_START		8
+#define  BXT_D_CR_DRP0_DUNIT_END		11
+#define BXT_D_CR_DRP0_DUNIT(x)	_MMIO(MCHBAR_MIRROR_BASE_SNB + \
+				      _PICK_EVEN((x) - 8, BXT_D_CR_DRP0_DUNIT8,\
+						 BXT_D_CR_DRP0_DUNIT9))
+#define  BXT_DRAM_RANK_MASK			0x3
+#define  BXT_DRAM_RANK_SINGLE			0x1
+#define  BXT_DRAM_RANK_DUAL			0x3
+#define  BXT_DRAM_WIDTH_MASK			0x3
+#define  BXT_DRAM_WIDTH_SHIFT			4
+#define  BXT_DRAM_WIDTH_X8			0x0
+#define  BXT_DRAM_WIDTH_X16			0x1
+#define  BXT_DRAM_WIDTH_X32			0x2
+#define  BXT_DRAM_WIDTH_X64			0x3
+#define  BXT_DRAM_SIZE_MASK			0x7
+#define  BXT_DRAM_SIZE_SHIFT			6
+#define  BXT_DRAM_SIZE_4GB			0x0
+#define  BXT_DRAM_SIZE_6GB			0x1
+#define  BXT_DRAM_SIZE_8GB			0x2
+#define  BXT_DRAM_SIZE_12GB			0x3
+#define  BXT_DRAM_SIZE_16GB			0x4
+
 /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
  * since on HSW we can't write to it using I915_WRITE. */
 #define D_COMP_HSW			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
--

2.16.2

Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#4 lore raw

Re: [PATCH 1/5] drm/i915/bxt: Decode memory bandwidth and parameters

Hi,

Quoted 189 lines · Rodrigo Vivi
Quoted 176 lines · Mahesh Kumar

This patch adds support to decode system memory bandwidth and other parameters for broxton platform, which will be used for arbitrated display memory bandwidth calculation in GEN9 based platforms and WM latency level-0 Work-around calculation on GEN9+ platforms.

Changes since V1:
- s/memdev_info/dram_info

---
  drivers/gpu/drm/i915/i915_drv.c | 116 ++++++++++++++++++++++++++++++++++++++++
  drivers/gpu/drm/i915/i915_drv.h |  11 ++++
  drivers/gpu/drm/i915/i915_reg.h |  30 +++++++++++
  3 files changed, 157 insertions(+)
drivers/gpu/drm/i915/i915_drv.c +116 -0
index 18a45e7a3d7c..16629601c9f4 100644
@@ -1070,6 +1070,116 @@ static void intel_sanitize_options(struct drm_i915_private *dev_priv)
  	intel_gvt_sanitize_options(dev_priv);
  }
 
+static int
+bxt_get_dram_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	u32 dram_channels;
+	u32 mem_freq_khz, val;
+	u8 num_active_channels;
+	int i;
+
+	val = I915_READ(BXT_P_CR_MC_BIOS_REQ_0_0_0);
+	mem_freq_khz = DIV_ROUND_UP((val & BXT_REQ_DATA_MASK) *
+				    BXT_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
+
+	dram_channels = (val >> BXT_DRAM_CHANNEL_ACTIVE_SHIFT) &
+					BXT_DRAM_CHANNEL_ACTIVE_MASK;
+	num_active_channels = hweight32(dram_channels);
+
+	/* Each active bit represents 4-byte channel */
+	dram_info->bandwidth_kbps = (mem_freq_khz * num_active_channels * 4);
+
+	if (dram_info->bandwidth_kbps == 0) {
+		DRM_INFO("Couldn't get system memory bandwidth\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Now read each DUNIT8/9/10/11 to check the rank of each dimms.
+	 */
+	for (i = BXT_D_CR_DRP0_DUNIT_START; i <= BXT_D_CR_DRP0_DUNIT_END; i++) {
+		u8 rank, size, width;
+		enum dram_rank ch_rank;
+
+		val = I915_READ(BXT_D_CR_DRP0_DUNIT(i));
+		if (val == 0xFFFFFFFF)
+			continue;
+
+		dram_info->num_channels++;
+		rank = val & BXT_DRAM_RANK_MASK;
+		width = (val >> BXT_DRAM_WIDTH_SHIFT) & BXT_DRAM_WIDTH_MASK;
+		size = (val >> BXT_DRAM_SIZE_SHIFT) & BXT_DRAM_SIZE_MASK;
+		if (rank == BXT_DRAM_RANK_SINGLE)
+			ch_rank = I915_DRAM_RANK_SINGLE;
+		else if (rank == BXT_DRAM_RANK_DUAL)
+			ch_rank = I915_DRAM_RANK_DUAL;
+		else
+			ch_rank = I915_DRAM_RANK_INVALID;
+
+		if (size == BXT_DRAM_SIZE_4GB)
+			size = 4;
+		else if (size == BXT_DRAM_SIZE_6GB)
+			size = 6;
+		else if (size == BXT_DRAM_SIZE_8GB)
+			size = 8;
+		else if (size == BXT_DRAM_SIZE_12GB)
+			size = 12;
+		else if (size == BXT_DRAM_SIZE_16GB)
+			size = 16;
+		else
+			size = 0;
+
+		width = (1 << width) * 8;
+		DRM_DEBUG_KMS("dram size:%dGB width:X%d rank:%s\n", size,
+			      width, rank == BXT_DRAM_RANK_SINGLE ? "single" :
+			      rank == BXT_DRAM_RANK_DUAL ? "dual" : "unknown");
+
+		/*
+		 * If any of the channel is single rank channel,
+		 * worst case output will be same as if single rank
+		 * memory, so consider single rank memory.
+		 */
+		if (dram_info->rank == I915_DRAM_RANK_INVALID)
+			dram_info->rank = ch_rank;
+		else if (ch_rank == I915_DRAM_RANK_SINGLE)
+			dram_info->rank = I915_DRAM_RANK_SINGLE;
+	}
+
+	if (dram_info->rank == I915_DRAM_RANK_INVALID) {
+		DRM_INFO("couldn't get memory rank information\n");
+		return -EINVAL;
+	}
+
+	dram_info->valid = true;
+	return 0;
+}
+
+static void
+intel_get_dram_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	int ret;
+
+	dram_info->valid = false;
+	dram_info->rank = I915_DRAM_RANK_INVALID;
+	dram_info->bandwidth_kbps = 0;
+	dram_info->num_channels = 0;
+
+	if (!IS_BROXTON(dev_priv))
+		return;
+
+	ret = bxt_get_dram_info(dev_priv);
+	if (ret)
+		return;
+
+	DRM_DEBUG_KMS("DRAM bandwidth:%d KBps, total-channels: %u\n",
+		      dram_info->bandwidth_kbps, dram_info->num_channels);
+	DRM_DEBUG_KMS("DRAM rank: %s rank\n",
+		      (dram_info->rank == I915_DRAM_RANK_DUAL) ?
+		      "dual" : "single");
+}
+
  /**
   * i915_driver_init_hw - setup state requiring device access
   * @dev_priv: device private
@@ -1187,6 +1297,12 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
  		goto err_msi;
 
  	intel_opregion_setup(dev_priv);
+	/*
+	 * Fill the dram structure to get the system raw bandwidth and
+	 * dram info. This will be used for memory latency calculation.
+	 */
+	intel_get_dram_info(dev_priv);
+
 
  	return 0;
 
drivers/gpu/drm/i915/i915_drv.h +11 -0
index 0f49f9988dfa..46f942fa7d60 100644
@@ -1904,6 +1904,17 @@ struct drm_i915_private {
  		bool distrust_bios_wm;
  	} wm;
 
+	struct dram_info {
+		bool valid;
+		u8 num_channels;
+		enum dram_rank {
+			I915_DRAM_RANK_INVALID = 0,
+			I915_DRAM_RANK_SINGLE,
+			I915_DRAM_RANK_DUAL
+		} rank;
+		u32 bandwidth_kbps;
+	} dram_info;
+
  	struct i915_runtime_pm runtime_pm;
 
  	struct {
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 5530c470f30d..66900d027570 100644

drivers/gpu/drm/i915/i915_reg.h enum skl_power_gate { · line 9640

Quoted 7 lines
drivers/gpu/drm/i915/i915_reg.h +4 -0
@@ -9634,6 +9634,36 @@ enum skl_power_gate {
  #define  DC_STATE_DEBUG_MASK_CORES	(1 << 0)
  #define  DC_STATE_DEBUG_MASK_MEMORY_UP	(1 << 1)
 
+#define BXT_P_CR_MC_BIOS_REQ_0_0_0	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x7114)
+#define  BXT_REQ_DATA_MASK			0x3F
+#define  BXT_DRAM_CHANNEL_ACTIVE_SHIFT		12
+#define  BXT_DRAM_CHANNEL_ACTIVE_MASK		0xF

Thanks a lot for the spec pointers. But now that I opened it and started to reading here it was hard to review and I noticed this is because the way that it is defined here doesn't respect our standards as documented:

Quoted 5 lines

"
* For bit fields, define a ``_MASK`` and a ``_SHIFT`` macro. Define bit field
* contents so that they are already shifted in place, and can be directly
* OR'd.
"

So I'll modify all "_MASK" defines to make them shifted in place, Should I redefine all the bit definitions also to be shifted? BTW these bit-fields are readonly for driver,

-Mahesh

Quoted 37 lines

So please provide a new version that follows the rules and that it is easier to review. And sorry for not noticing this on yesterday's review.

Quoted 32 lines
drivers/gpu/drm/i915/i915_reg.h +26 -1
+#define  BXT_MEMORY_FREQ_MULTIPLIER_HZ		133333333
+
+#define BXT_D_CR_DRP0_DUNIT8			0x1000
+#define BXT_D_CR_DRP0_DUNIT9			0x1200
+#define  BXT_D_CR_DRP0_DUNIT_START		8
+#define  BXT_D_CR_DRP0_DUNIT_END		11
+#define BXT_D_CR_DRP0_DUNIT(x)	_MMIO(MCHBAR_MIRROR_BASE_SNB + \
+				      _PICK_EVEN((x) - 8, BXT_D_CR_DRP0_DUNIT8,\
+						 BXT_D_CR_DRP0_DUNIT9))
+#define  BXT_DRAM_RANK_MASK			0x3
+#define  BXT_DRAM_RANK_SINGLE			0x1
+#define  BXT_DRAM_RANK_DUAL			0x3
+#define  BXT_DRAM_WIDTH_MASK			0x3
+#define  BXT_DRAM_WIDTH_SHIFT			4
+#define  BXT_DRAM_WIDTH_X8			0x0
+#define  BXT_DRAM_WIDTH_X16			0x1
+#define  BXT_DRAM_WIDTH_X32			0x2
+#define  BXT_DRAM_WIDTH_X64			0x3
+#define  BXT_DRAM_SIZE_MASK			0x7
+#define  BXT_DRAM_SIZE_SHIFT			6
+#define  BXT_DRAM_SIZE_4GB			0x0
+#define  BXT_DRAM_SIZE_6GB			0x1
+#define  BXT_DRAM_SIZE_8GB			0x2
+#define  BXT_DRAM_SIZE_12GB			0x3
+#define  BXT_DRAM_SIZE_16GB			0x4
+
  /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
   * since on HSW we can't write to it using I915_WRITE. */
  #define D_COMP_HSW			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
--

2.16.2

Quoted 4 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#5 lore raw

Re: [PATCH 1/5] drm/i915/bxt: Decode memory bandwidth and parameters

Quoted 193 lines · Mahesh

Hi,

Quoted 189 lines · Rodrigo Vivi
Quoted 176 lines · Mahesh Kumar

This patch adds support to decode system memory bandwidth and other parameters for broxton platform, which will be used for arbitrated display memory bandwidth calculation in GEN9 based platforms and WM latency level-0 Work-around calculation on GEN9+ platforms.

Changes since V1:
- s/memdev_info/dram_info

---
  drivers/gpu/drm/i915/i915_drv.c | 116 ++++++++++++++++++++++++++++++++++++++++
  drivers/gpu/drm/i915/i915_drv.h |  11 ++++
  drivers/gpu/drm/i915/i915_reg.h |  30 +++++++++++
  3 files changed, 157 insertions(+)
drivers/gpu/drm/i915/i915_drv.c +116 -0
index 18a45e7a3d7c..16629601c9f4 100644
@@ -1070,6 +1070,116 @@ static void intel_sanitize_options(struct drm_i915_private *dev_priv)
  	intel_gvt_sanitize_options(dev_priv);
  }
 
+static int
+bxt_get_dram_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	u32 dram_channels;
+	u32 mem_freq_khz, val;
+	u8 num_active_channels;
+	int i;
+
+	val = I915_READ(BXT_P_CR_MC_BIOS_REQ_0_0_0);
+	mem_freq_khz = DIV_ROUND_UP((val & BXT_REQ_DATA_MASK) *
+				    BXT_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
+
+	dram_channels = (val >> BXT_DRAM_CHANNEL_ACTIVE_SHIFT) &
+					BXT_DRAM_CHANNEL_ACTIVE_MASK;
+	num_active_channels = hweight32(dram_channels);
+
+	/* Each active bit represents 4-byte channel */
+	dram_info->bandwidth_kbps = (mem_freq_khz * num_active_channels * 4);
+
+	if (dram_info->bandwidth_kbps == 0) {
+		DRM_INFO("Couldn't get system memory bandwidth\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Now read each DUNIT8/9/10/11 to check the rank of each dimms.
+	 */
+	for (i = BXT_D_CR_DRP0_DUNIT_START; i <= BXT_D_CR_DRP0_DUNIT_END; i++) {
+		u8 rank, size, width;
+		enum dram_rank ch_rank;
+
+		val = I915_READ(BXT_D_CR_DRP0_DUNIT(i));
+		if (val == 0xFFFFFFFF)
+			continue;
+
+		dram_info->num_channels++;
+		rank = val & BXT_DRAM_RANK_MASK;
+		width = (val >> BXT_DRAM_WIDTH_SHIFT) & BXT_DRAM_WIDTH_MASK;
+		size = (val >> BXT_DRAM_SIZE_SHIFT) & BXT_DRAM_SIZE_MASK;
+		if (rank == BXT_DRAM_RANK_SINGLE)
+			ch_rank = I915_DRAM_RANK_SINGLE;
+		else if (rank == BXT_DRAM_RANK_DUAL)
+			ch_rank = I915_DRAM_RANK_DUAL;
+		else
+			ch_rank = I915_DRAM_RANK_INVALID;
+
+		if (size == BXT_DRAM_SIZE_4GB)
+			size = 4;
+		else if (size == BXT_DRAM_SIZE_6GB)
+			size = 6;
+		else if (size == BXT_DRAM_SIZE_8GB)
+			size = 8;
+		else if (size == BXT_DRAM_SIZE_12GB)
+			size = 12;
+		else if (size == BXT_DRAM_SIZE_16GB)
+			size = 16;
+		else
+			size = 0;
+
+		width = (1 << width) * 8;
+		DRM_DEBUG_KMS("dram size:%dGB width:X%d rank:%s\n", size,
+			      width, rank == BXT_DRAM_RANK_SINGLE ? "single" :
+			      rank == BXT_DRAM_RANK_DUAL ? "dual" : "unknown");
+
+		/*
+		 * If any of the channel is single rank channel,
+		 * worst case output will be same as if single rank
+		 * memory, so consider single rank memory.
+		 */
+		if (dram_info->rank == I915_DRAM_RANK_INVALID)
+			dram_info->rank = ch_rank;
+		else if (ch_rank == I915_DRAM_RANK_SINGLE)
+			dram_info->rank = I915_DRAM_RANK_SINGLE;
+	}
+
+	if (dram_info->rank == I915_DRAM_RANK_INVALID) {
+		DRM_INFO("couldn't get memory rank information\n");
+		return -EINVAL;
+	}
+
+	dram_info->valid = true;
+	return 0;
+}
+
+static void
+intel_get_dram_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	int ret;
+
+	dram_info->valid = false;
+	dram_info->rank = I915_DRAM_RANK_INVALID;
+	dram_info->bandwidth_kbps = 0;
+	dram_info->num_channels = 0;
+
+	if (!IS_BROXTON(dev_priv))
+		return;
+
+	ret = bxt_get_dram_info(dev_priv);
+	if (ret)
+		return;
+
+	DRM_DEBUG_KMS("DRAM bandwidth:%d KBps, total-channels: %u\n",
+		      dram_info->bandwidth_kbps, dram_info->num_channels);
+	DRM_DEBUG_KMS("DRAM rank: %s rank\n",
+		      (dram_info->rank == I915_DRAM_RANK_DUAL) ?
+		      "dual" : "single");
+}
+
  /**
   * i915_driver_init_hw - setup state requiring device access
   * @dev_priv: device private
@@ -1187,6 +1297,12 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
  		goto err_msi;
 
  	intel_opregion_setup(dev_priv);
+	/*
+	 * Fill the dram structure to get the system raw bandwidth and
+	 * dram info. This will be used for memory latency calculation.
+	 */
+	intel_get_dram_info(dev_priv);
+
 
  	return 0;
 
drivers/gpu/drm/i915/i915_drv.h +11 -0
index 0f49f9988dfa..46f942fa7d60 100644
@@ -1904,6 +1904,17 @@ struct drm_i915_private {
  		bool distrust_bios_wm;
  	} wm;
 
+	struct dram_info {
+		bool valid;
+		u8 num_channels;
+		enum dram_rank {
+			I915_DRAM_RANK_INVALID = 0,
+			I915_DRAM_RANK_SINGLE,
+			I915_DRAM_RANK_DUAL
+		} rank;
+		u32 bandwidth_kbps;
+	} dram_info;
+
  	struct i915_runtime_pm runtime_pm;
 
  	struct {
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 5530c470f30d..66900d027570 100644

drivers/gpu/drm/i915/i915_reg.h enum skl_power_gate { · line 9640

Quoted 7 lines
drivers/gpu/drm/i915/i915_reg.h +4 -0
@@ -9634,6 +9634,36 @@ enum skl_power_gate {
  #define  DC_STATE_DEBUG_MASK_CORES	(1 << 0)
  #define  DC_STATE_DEBUG_MASK_MEMORY_UP	(1 << 1)
 
+#define BXT_P_CR_MC_BIOS_REQ_0_0_0	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x7114)
+#define  BXT_REQ_DATA_MASK			0x3F
+#define  BXT_DRAM_CHANNEL_ACTIVE_SHIFT		12
+#define  BXT_DRAM_CHANNEL_ACTIVE_MASK		0xF

Thanks a lot for the spec pointers. But now that I opened it and started to reading here it was hard to review and I noticed this is because the way that it is defined here doesn't respect our standards as documented:

Quoted 8 lines
Quoted 5 lines

"
* For bit fields, define a ``_MASK`` and a ``_SHIFT`` macro. Define bit field
* contents so that they are already shifted in place, and can be directly
* OR'd.
"

So I'll modify all "_MASK" defines to make them shifted in place, Should I redefine all the bit definitions also to be shifted?
BTW these bit-fields are readonly for driver,

Yes, please define everything with right shift in place so it gets easier to read.

Thanks,
Rodrigo.

Quoted 39 lines

-Mahesh

Quoted 37 lines

So please provide a new version that follows the rules and that it is easier to review. And sorry for not noticing this on yesterday's review.

Quoted 32 lines
drivers/gpu/drm/i915/i915_reg.h +26 -1
+#define  BXT_MEMORY_FREQ_MULTIPLIER_HZ		133333333
+
+#define BXT_D_CR_DRP0_DUNIT8			0x1000
+#define BXT_D_CR_DRP0_DUNIT9			0x1200
+#define  BXT_D_CR_DRP0_DUNIT_START		8
+#define  BXT_D_CR_DRP0_DUNIT_END		11
+#define BXT_D_CR_DRP0_DUNIT(x)	_MMIO(MCHBAR_MIRROR_BASE_SNB + \
+				      _PICK_EVEN((x) - 8, BXT_D_CR_DRP0_DUNIT8,\
+						 BXT_D_CR_DRP0_DUNIT9))
+#define  BXT_DRAM_RANK_MASK			0x3
+#define  BXT_DRAM_RANK_SINGLE			0x1
+#define  BXT_DRAM_RANK_DUAL			0x3
+#define  BXT_DRAM_WIDTH_MASK			0x3
+#define  BXT_DRAM_WIDTH_SHIFT			4
+#define  BXT_DRAM_WIDTH_X8			0x0
+#define  BXT_DRAM_WIDTH_X16			0x1
+#define  BXT_DRAM_WIDTH_X32			0x2
+#define  BXT_DRAM_WIDTH_X64			0x3
+#define  BXT_DRAM_SIZE_MASK			0x7
+#define  BXT_DRAM_SIZE_SHIFT			6
+#define  BXT_DRAM_SIZE_4GB			0x0
+#define  BXT_DRAM_SIZE_6GB			0x1
+#define  BXT_DRAM_SIZE_8GB			0x2
+#define  BXT_DRAM_SIZE_12GB			0x3
+#define  BXT_DRAM_SIZE_16GB			0x4
+
  /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
   * since on HSW we can't write to it using I915_WRITE. */
  #define D_COMP_HSW			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
--

2.16.2

Quoted 5 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

PATCH 2/5 drm/i915/skl+: Decode memory bandwidth and parameters

In reply to Mahesh Kumar

This patch adds support to decode system memory bandwidth and other parameters for skylake and Gen9+ platforms, which will be used for arbitrated display memory bandwidth calculation in GEN9 based platforms and WM latency level-0 Work-around calculation on GEN9+.

Changes Since V1:
- s/memdev_info/dram_info
- create a struct to hold channel info

---
 drivers/gpu/drm/i915/i915_drv.c | 131 ++++++++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/i915_drv.h |   7 +++
 drivers/gpu/drm/i915/i915_reg.h |  21 +++++++
 3 files changed, 155 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +127 -4
index 16629601c9f4..ddf6bf9b500a 100644
@@ -1070,6 +1070,118 @@ static void intel_sanitize_options(struct drm_i915_private *dev_priv)
 	intel_gvt_sanitize_options(dev_priv);
 }
 
+static int
+skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val)
+{
+	u8 l_rank, s_rank;
+	u8 l_size, s_size;
+	u8 l_width, s_width;
+	enum dram_rank rank;
+
+	if (!val)
+		return -1;
+
+	l_size = (val >> SKL_DRAM_SIZE_L_SHIFT) & SKL_DRAM_SIZE_MASK;
+	s_size = (val >> SKL_DRAM_SIZE_S_SHIFT) & SKL_DRAM_SIZE_MASK;
+	l_width = (val >> SKL_DRAM_WIDTH_L_SHIFT) & SKL_DRAM_WIDTH_MASK;
+	s_width = (val >> SKL_DRAM_WIDTH_S_SHIFT) & SKL_DRAM_WIDTH_MASK;
+	l_rank = (val >> SKL_DRAM_RANK_L_SHIFT) & SKL_DRAM_RANK_MASK;
+	s_rank = (val >> SKL_DRAM_RANK_S_SHIFT) & SKL_DRAM_RANK_MASK;
+
+	if (l_size == 0 && s_size == 0)
+		return -1;
+
+	DRM_DEBUG_KMS("(size:width:rank) L(%dGB:X%d:%s) S(%dGB:X%d:%s)\n",
+		      l_size, (1 << l_width) * 8, l_rank ? "dual" : "single",
+		      s_size, (1 << s_width) * 8, s_rank ? "dual" : "single");
+
+	if (l_rank == SKL_DRAM_RANK_DUAL || s_rank == SKL_DRAM_RANK_DUAL)
+		rank = I915_DRAM_RANK_DUAL;
+	else if ((l_size && l_rank == SKL_DRAM_RANK_SINGLE) &&
+		 (s_size && s_rank == SKL_DRAM_RANK_SINGLE))
+		rank = I915_DRAM_RANK_DUAL;
+	else
+		rank = I915_DRAM_RANK_SINGLE;
+
+	ch->l_info.size = l_size;
+	ch->s_info.size = s_size;
+	ch->l_info.width = l_width;
+	ch->s_info.width = s_width;
+	ch->l_info.rank = l_rank;
+	ch->s_info.rank = s_rank;
+	ch->rank = rank;
+
+	return 0;
+}
+
+static int
+skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	struct dram_channel_info ch0, ch1;
+	u32 val;
+	int ret;
+
+	val = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
+	ret = skl_dram_get_channel_info(&ch0, val);
+	if (ret == 0)
+		dram_info->num_channels++;
+
+	val = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
+	ret = skl_dram_get_channel_info(&ch1, val);
+	if (ret == 0)
+		dram_info->num_channels++;
+
+	if (dram_info->num_channels == 0) {
+		DRM_INFO("Number of memory channels is zero\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * If any of the channel is single rank channel, worst case output
+	 * will be same as if single rank memory, so consider single rank
+	 * memory.
+	 */
+	if (ch0.rank == I915_DRAM_RANK_SINGLE ||
+	    ch1.rank == I915_DRAM_RANK_SINGLE)
+		dram_info->rank = I915_DRAM_RANK_SINGLE;
+	else
+		dram_info->rank = max(ch0.rank, ch1.rank);
+
+	if (dram_info->rank == I915_DRAM_RANK_INVALID) {
+		DRM_INFO("couldn't get memory rank information\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int
+skl_get_dram_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	u32 mem_freq_khz, val;
+	int ret;
+
+	ret = skl_dram_get_channels_info(dev_priv);
+	if (ret)
+		return ret;
+
+	val = I915_READ(SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU);
+	mem_freq_khz = DIV_ROUND_UP((val & SKL_REQ_DATA_MASK) *
+				    SKL_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
+
+	dram_info->bandwidth_kbps = dram_info->num_channels *
+							mem_freq_khz * 8;
+
+	if (dram_info->bandwidth_kbps == 0) {
+		DRM_INFO("Couldn't get system memory bandwidth\n");
+		return -EINVAL;
+	}
+
+	dram_info->valid = true;
+	return 0;
+}
+
 static int
 bxt_get_dram_info(struct drm_i915_private *dev_priv)
 {
@@ -1159,6 +1271,7 @@ static void
 intel_get_dram_info(struct drm_i915_private *dev_priv)
 {
 	struct dram_info *dram_info = &dev_priv->dram_info;
+	char bandwidth_str[32];
 	int ret;
 
 	dram_info->valid = false;
@@ -1166,15 +1279,25 @@ intel_get_dram_info(struct drm_i915_private *dev_priv)
 	dram_info->bandwidth_kbps = 0;
 	dram_info->num_channels = 0;
 
-	if (!IS_BROXTON(dev_priv))
+	if (INTEL_GEN(dev_priv) < 9)
 		return;
 
-	ret = bxt_get_dram_info(dev_priv);
+	/* Need to calculate bandwidth only for Gen9 */
+	if (IS_BROXTON(dev_priv))
+		ret = bxt_get_dram_info(dev_priv);
+	else if (INTEL_GEN(dev_priv) == 9)
+		ret = skl_get_dram_info(dev_priv);
+	else
+		ret = skl_dram_get_channels_info(dev_priv);
 	if (ret)
 		return;
 
-	DRM_DEBUG_KMS("DRAM bandwidth:%d KBps, total-channels: %u\n",
-		      dram_info->bandwidth_kbps, dram_info->num_channels);
+	if (dram_info->bandwidth_kbps)
+		sprintf(bandwidth_str, "%d KBps", dram_info->bandwidth_kbps);
+	else
+		sprintf(bandwidth_str, "unknown");
+	DRM_DEBUG_KMS("DRAM bandwidth:%s, total-channels: %u\n",
+		      bandwidth_str, dram_info->num_channels);
 	DRM_DEBUG_KMS("DRAM rank: %s rank\n",
 		      (dram_info->rank == I915_DRAM_RANK_DUAL) ?
 		      "dual" : "single");
drivers/gpu/drm/i915/i915_drv.h +7 -0
index 46f942fa7d60..2d12fc152b49 100644
@@ -2128,6 +2128,13 @@ struct drm_i915_private {
 	 */
 };
 
+struct dram_channel_info {
+	struct info {
+		u8 size, width, rank;
+	} l_info, s_info;
+	enum dram_rank rank;
+};
+
 static inline struct drm_i915_private *to_i915(const struct drm_device *dev)
 {
 	return container_of(dev, struct drm_i915_private, drm);
drivers/gpu/drm/i915/i915_reg.h +21 -0
index 66900d027570..e4d61167fb64 100644
@@ -9664,6 +9664,27 @@ enum skl_power_gate {
 #define  BXT_DRAM_SIZE_12GB			0x3
 #define  BXT_DRAM_SIZE_16GB			0x4
 
+#define SKL_MEMORY_FREQ_MULTIPLIER_HZ		266666666
+#define SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5E04)
+#define  SKL_REQ_DATA_MASK			(0xF << 0)
+
+#define SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x500C)
+#define SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5010)
+#define  SKL_DRAM_SIZE_MASK			0x3F
+#define  SKL_DRAM_SIZE_L_SHIFT			0
+#define  SKL_DRAM_SIZE_S_SHIFT			16
+#define  SKL_DRAM_WIDTH_MASK			0x3
+#define  SKL_DRAM_WIDTH_L_SHIFT			8
+#define  SKL_DRAM_WIDTH_S_SHIFT			24
+#define  SKL_DRAM_WIDTH_X8			0x0
+#define  SKL_DRAM_WIDTH_X16			0x1
+#define  SKL_DRAM_WIDTH_X32			0x2
+#define  SKL_DRAM_RANK_MASK			0x1
+#define  SKL_DRAM_RANK_L_SHIFT			10
+#define  SKL_DRAM_RANK_S_SHIFT			26
+#define  SKL_DRAM_RANK_SINGLE			0x0
+#define  SKL_DRAM_RANK_DUAL			0x1
+
 /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
  * since on HSW we can't write to it using I915_WRITE. */
 #define D_COMP_HSW			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#7 lore raw

Re: [PATCH 2/5] drm/i915/skl+: Decode memory bandwidth and parameters

Quoted 24 lines · Mahesh Kumar

This patch adds support to decode system memory bandwidth and other parameters for skylake and Gen9+ platforms, which will be used for arbitrated display memory bandwidth calculation in GEN9 based platforms and WM latency level-0 Work-around calculation on GEN9+.

Changes Since V1:
- s/memdev_info/dram_info
- create a struct to hold channel info

---
 drivers/gpu/drm/i915/i915_drv.c | 131 ++++++++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/i915_drv.h |   7 +++
 drivers/gpu/drm/i915/i915_reg.h |  21 +++++++
 3 files changed, 155 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -0
index 16629601c9f4..ddf6bf9b500a 100644
@@ -1070,6 +1070,118 @@ static void intel_sanitize_options(struct drm_i915_private *dev_priv)
 	intel_gvt_sanitize_options(dev_priv);
 }
 

drivers/gpu/drm/i915/i915_drv.c static void intel_sanitize_options(struct drm_i915_private *dev_priv) · line 1082

Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +10 -0
+static int
+skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val)
+{
+	u8 l_rank, s_rank;
+	u8 l_size, s_size;
+	u8 l_width, s_width;
+	enum dram_rank rank;
+
+	if (!val)
+		return -1;

-SOMEERRNO?

drivers/gpu/drm/i915/i915_drv.c static void intel_sanitize_options(struct drm_i915_private *dev_priv) · line 1092

Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +10 -0
+
+	l_size = (val >> SKL_DRAM_SIZE_L_SHIFT) & SKL_DRAM_SIZE_MASK;
+	s_size = (val >> SKL_DRAM_SIZE_S_SHIFT) & SKL_DRAM_SIZE_MASK;
+	l_width = (val >> SKL_DRAM_WIDTH_L_SHIFT) & SKL_DRAM_WIDTH_MASK;
+	s_width = (val >> SKL_DRAM_WIDTH_S_SHIFT) & SKL_DRAM_WIDTH_MASK;
+	l_rank = (val >> SKL_DRAM_RANK_L_SHIFT) & SKL_DRAM_RANK_MASK;
+	s_rank = (val >> SKL_DRAM_RANK_S_SHIFT) & SKL_DRAM_RANK_MASK;
+
+	if (l_size == 0 && s_size == 0)
+		return -1;

ditto

Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +10 -0
+
+	DRM_DEBUG_KMS("(size:width:rank) L(%dGB:X%d:%s) S(%dGB:X%d:%s)\n",
+		      l_size, (1 << l_width) * 8, l_rank ? "dual" : "single",
+		      s_size, (1 << s_width) * 8, s_rank ? "dual" : "single");
+
+	if (l_rank == SKL_DRAM_RANK_DUAL || s_rank == SKL_DRAM_RANK_DUAL)
+		rank = I915_DRAM_RANK_DUAL;
+	else if ((l_size && l_rank == SKL_DRAM_RANK_SINGLE) &&
+		 (s_size && s_rank == SKL_DRAM_RANK_SINGLE))
+		rank = I915_DRAM_RANK_DUAL;

drivers/gpu/drm/i915/i915_drv.c static void intel_sanitize_options(struct drm_i915_private *dev_priv) · line 1112

Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +10 -0
+	else
+		rank = I915_DRAM_RANK_SINGLE;
+
+	ch->l_info.size = l_size;
+	ch->s_info.size = s_size;
+	ch->l_info.width = l_width;
+	ch->s_info.width = s_width;
+	ch->l_info.rank = l_rank;
+	ch->s_info.rank = s_rank;
+	ch->rank = rank;

could we do this directly without intermediates? not clear if we change in the middle after printing...

Quoted 89 lines
drivers/gpu/drm/i915/i915_drv.c +74 -1
+
+	return 0;
+}
+
+static int
+skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	struct dram_channel_info ch0, ch1;
+	u32 val;
+	int ret;
+
+	val = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
+	ret = skl_dram_get_channel_info(&ch0, val);
+	if (ret == 0)
+		dram_info->num_channels++;
+
+	val = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
+	ret = skl_dram_get_channel_info(&ch1, val);
+	if (ret == 0)
+		dram_info->num_channels++;
+
+	if (dram_info->num_channels == 0) {
+		DRM_INFO("Number of memory channels is zero\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * If any of the channel is single rank channel, worst case output
+	 * will be same as if single rank memory, so consider single rank
+	 * memory.
+	 */
+	if (ch0.rank == I915_DRAM_RANK_SINGLE ||
+	    ch1.rank == I915_DRAM_RANK_SINGLE)
+		dram_info->rank = I915_DRAM_RANK_SINGLE;
+	else
+		dram_info->rank = max(ch0.rank, ch1.rank);
+
+	if (dram_info->rank == I915_DRAM_RANK_INVALID) {
+		DRM_INFO("couldn't get memory rank information\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int
+skl_get_dram_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	u32 mem_freq_khz, val;
+	int ret;
+
+	ret = skl_dram_get_channels_info(dev_priv);
+	if (ret)
+		return ret;
+
+	val = I915_READ(SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU);
+	mem_freq_khz = DIV_ROUND_UP((val & SKL_REQ_DATA_MASK) *
+				    SKL_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
+
+	dram_info->bandwidth_kbps = dram_info->num_channels *
+							mem_freq_khz * 8;
+
+	if (dram_info->bandwidth_kbps == 0) {
+		DRM_INFO("Couldn't get system memory bandwidth\n");
+		return -EINVAL;
+	}
+
+	dram_info->valid = true;
+	return 0;
+}
+
 static int
 bxt_get_dram_info(struct drm_i915_private *dev_priv)
 {
@@ -1159,6 +1271,7 @@ static void
 intel_get_dram_info(struct drm_i915_private *dev_priv)
 {
 	struct dram_info *dram_info = &dev_priv->dram_info;
+	char bandwidth_str[32];
 	int ret;
 
 	dram_info->valid = false;
@@ -1166,15 +1279,25 @@ intel_get_dram_info(struct drm_i915_private *dev_priv)
 	dram_info->bandwidth_kbps = 0;
 	dram_info->num_channels = 0;
 
-	if (!IS_BROXTON(dev_priv))
+	if (INTEL_GEN(dev_priv) < 9)

drivers/gpu/drm/i915/i915_drv.c intel_get_dram_info(struct drm_i915_private *dev_priv) · line 1291

Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +7 -1
 		return;
 
-	ret = bxt_get_dram_info(dev_priv);
+	/* Need to calculate bandwidth only for Gen9 */
+	if (IS_BROXTON(dev_priv))
+		ret = bxt_get_dram_info(dev_priv);
+	else if (INTEL_GEN(dev_priv) == 9)
+		ret = skl_get_dram_info(dev_priv);
+	else
+		ret = skl_dram_get_channels_info(dev_priv);

I din't get this... why newer platforms only need this partial path?

also this highlights that the names of the functions are confusing...

Quoted 19 lines
drivers/gpu/drm/i915/i915_drv.c +6 -2
 	if (ret)
 		return;
 
-	DRM_DEBUG_KMS("DRAM bandwidth:%d KBps, total-channels: %u\n",
-		      dram_info->bandwidth_kbps, dram_info->num_channels);
+	if (dram_info->bandwidth_kbps)
+		sprintf(bandwidth_str, "%d KBps", dram_info->bandwidth_kbps);
+	else
+		sprintf(bandwidth_str, "unknown");
+	DRM_DEBUG_KMS("DRAM bandwidth:%s, total-channels: %u\n",
+		      bandwidth_str, dram_info->num_channels);
 	DRM_DEBUG_KMS("DRAM rank: %s rank\n",
 		      (dram_info->rank == I915_DRAM_RANK_DUAL) ?
 		      "dual" : "single");
drivers/gpu/drm/i915/i915_drv.h +0 -0
index 46f942fa7d60..2d12fc152b49 100644

drivers/gpu/drm/i915/i915_drv.h struct drm_i915_private { · line 2135

Quoted 8 lines
drivers/gpu/drm/i915/i915_drv.h +5 -0
@@ -2128,6 +2128,13 @@ struct drm_i915_private {
 	 */
 };
 
+struct dram_channel_info {
+	struct info {
+		u8 size, width, rank;
+	} l_info, s_info;
+	enum dram_rank rank;

why do we need duplicated rand information?

Quoted 23 lines
drivers/gpu/drm/i915/i915_drv.h +2 -0
+};
+
 static inline struct drm_i915_private *to_i915(const struct drm_device *dev)
 {
 	return container_of(dev, struct drm_i915_private, drm);
drivers/gpu/drm/i915/i915_reg.h +10 -0
index 66900d027570..e4d61167fb64 100644
@@ -9664,6 +9664,27 @@ enum skl_power_gate {
 #define  BXT_DRAM_SIZE_12GB			0x3
 #define  BXT_DRAM_SIZE_16GB			0x4
 
+#define SKL_MEMORY_FREQ_MULTIPLIER_HZ		266666666
+#define SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5E04)
+#define  SKL_REQ_DATA_MASK			(0xF << 0)
+
+#define SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x500C)
+#define SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5010)
+#define  SKL_DRAM_SIZE_MASK			0x3F
+#define  SKL_DRAM_SIZE_L_SHIFT			0
+#define  SKL_DRAM_SIZE_S_SHIFT			16
+#define  SKL_DRAM_WIDTH_MASK			0x3

drivers/gpu/drm/i915/i915_reg.h enum skl_power_gate { · line 9686

Quoted 10 lines
drivers/gpu/drm/i915/i915_reg.h +10 -0
+#define  SKL_DRAM_WIDTH_L_SHIFT			8
+#define  SKL_DRAM_WIDTH_S_SHIFT			24
+#define  SKL_DRAM_WIDTH_X8			0x0
+#define  SKL_DRAM_WIDTH_X16			0x1
+#define  SKL_DRAM_WIDTH_X32			0x2
+#define  SKL_DRAM_RANK_MASK			0x1
+#define  SKL_DRAM_RANK_L_SHIFT			10
+#define  SKL_DRAM_RANK_S_SHIFT			26
+#define  SKL_DRAM_RANK_SINGLE			0x0
+#define  SKL_DRAM_RANK_DUAL			0x1

again, spec pointers please.

Quoted 11 lines
drivers/gpu/drm/i915/i915_reg.h +1 -0
+
 /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
  * since on HSW we can't write to it using I915_WRITE. */
 #define D_COMP_HSW			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

Re: [PATCH 2/5] drm/i915/skl+: Decode memory bandwidth and parameters

Hi,

Quoted 25 lines · Rodrigo Vivi
Quoted 24 lines · Mahesh Kumar

This patch adds support to decode system memory bandwidth and other parameters for skylake and Gen9+ platforms, which will be used for arbitrated display memory bandwidth calculation in GEN9 based platforms and WM latency level-0 Work-around calculation on GEN9+.

Changes Since V1:
- s/memdev_info/dram_info
- create a struct to hold channel info

---
  drivers/gpu/drm/i915/i915_drv.c | 131 ++++++++++++++++++++++++++++++++++++++--
  drivers/gpu/drm/i915/i915_drv.h |   7 +++
  drivers/gpu/drm/i915/i915_reg.h |  21 +++++++
  3 files changed, 155 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -0
index 16629601c9f4..ddf6bf9b500a 100644
@@ -1070,6 +1070,118 @@ static void intel_sanitize_options(struct drm_i915_private *dev_priv)
  	intel_gvt_sanitize_options(dev_priv);
  }
 
Quoted 11 lines

drivers/gpu/drm/i915/i915_drv.c static void intel_sanitize_options(struct drm_i915_private *dev_priv) · line 1082

Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +10 -0
+static int
+skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val)
+{
+	u8 l_rank, s_rank;
+	u8 l_size, s_size;
+	u8 l_width, s_width;
+	enum dram_rank rank;
+
+	if (!val)
+		return -1;

-SOMEERRNO?

ok sure.

Quoted 27 lines

drivers/gpu/drm/i915/i915_drv.c static void intel_sanitize_options(struct drm_i915_private *dev_priv) · line 1092

Quoted 11 lines
drivers/gpu/drm/i915/i915_drv.c +10 -0
+
+	l_size = (val >> SKL_DRAM_SIZE_L_SHIFT) & SKL_DRAM_SIZE_MASK;
+	s_size = (val >> SKL_DRAM_SIZE_S_SHIFT) & SKL_DRAM_SIZE_MASK;
+	l_width = (val >> SKL_DRAM_WIDTH_L_SHIFT) & SKL_DRAM_WIDTH_MASK;
+	s_width = (val >> SKL_DRAM_WIDTH_S_SHIFT) & SKL_DRAM_WIDTH_MASK;
+	l_rank = (val >> SKL_DRAM_RANK_L_SHIFT) & SKL_DRAM_RANK_MASK;
+	s_rank = (val >> SKL_DRAM_RANK_S_SHIFT) & SKL_DRAM_RANK_MASK;
+
+	if (l_size == 0 && s_size == 0)
+		return -1;

ditto

Quoted 14 lines
drivers/gpu/drm/i915/i915_drv.c +14 -0
+
+	DRM_DEBUG_KMS("(size:width:rank) L(%dGB:X%d:%s) S(%dGB:X%d:%s)\n",
+		      l_size, (1 << l_width) * 8, l_rank ? "dual" : "single",
+		      s_size, (1 << s_width) * 8, s_rank ? "dual" : "single");
+
+	if (l_rank == SKL_DRAM_RANK_DUAL || s_rank == SKL_DRAM_RANK_DUAL)
+		rank = I915_DRAM_RANK_DUAL;
+	else if ((l_size && l_rank == SKL_DRAM_RANK_SINGLE) &&
+		 (s_size && s_rank == SKL_DRAM_RANK_SINGLE))
+		rank = I915_DRAM_RANK_DUAL;
+	else
+		rank = I915_DRAM_RANK_SINGLE;
+
+	ch->l_info.size = l_size;
Quoted 8 lines

drivers/gpu/drm/i915/i915_drv.c static void intel_sanitize_options(struct drm_i915_private *dev_priv) · line 1112

Quoted 6 lines
drivers/gpu/drm/i915/i915_drv.c +6 -0
+	ch->s_info.size = s_size;
+	ch->l_info.width = l_width;
+	ch->s_info.width = s_width;
+	ch->l_info.rank = l_rank;
+	ch->s_info.rank = s_rank;
+	ch->rank = rank;

could we do this directly without intermediates? not clear if we change in the middle after printing...

This information is needed later while checking is memories are symmetric, that's why we need to keep this as well.

Quoted 102 lines
Quoted 90 lines
drivers/gpu/drm/i915/i915_drv.c +74 -1
+
+	return 0;
+}
+
+static int
+skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	struct dram_channel_info ch0, ch1;
+	u32 val;
+	int ret;
+
+	val = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
+	ret = skl_dram_get_channel_info(&ch0, val);
+	if (ret == 0)
+		dram_info->num_channels++;
+
+	val = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
+	ret = skl_dram_get_channel_info(&ch1, val);
+	if (ret == 0)
+		dram_info->num_channels++;
+
+	if (dram_info->num_channels == 0) {
+		DRM_INFO("Number of memory channels is zero\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * If any of the channel is single rank channel, worst case output
+	 * will be same as if single rank memory, so consider single rank
+	 * memory.
+	 */
+	if (ch0.rank == I915_DRAM_RANK_SINGLE ||
+	    ch1.rank == I915_DRAM_RANK_SINGLE)
+		dram_info->rank = I915_DRAM_RANK_SINGLE;
+	else
+		dram_info->rank = max(ch0.rank, ch1.rank);
+
+	if (dram_info->rank == I915_DRAM_RANK_INVALID) {
+		DRM_INFO("couldn't get memory rank information\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int
+skl_get_dram_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	u32 mem_freq_khz, val;
+	int ret;
+
+	ret = skl_dram_get_channels_info(dev_priv);
+	if (ret)
+		return ret;
+
+	val = I915_READ(SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU);
+	mem_freq_khz = DIV_ROUND_UP((val & SKL_REQ_DATA_MASK) *
+				    SKL_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
+
+	dram_info->bandwidth_kbps = dram_info->num_channels *
+							mem_freq_khz * 8;
+
+	if (dram_info->bandwidth_kbps == 0) {
+		DRM_INFO("Couldn't get system memory bandwidth\n");
+		return -EINVAL;
+	}
+
+	dram_info->valid = true;
+	return 0;
+}
+
  static int
  bxt_get_dram_info(struct drm_i915_private *dev_priv)
  {
@@ -1159,6 +1271,7 @@ static void
  intel_get_dram_info(struct drm_i915_private *dev_priv)
  {
  	struct dram_info *dram_info = &dev_priv->dram_info;
+	char bandwidth_str[32];
  	int ret;
 
  	dram_info->valid = false;
@@ -1166,15 +1279,25 @@ intel_get_dram_info(struct drm_i915_private *dev_priv)
  	dram_info->bandwidth_kbps = 0;
  	dram_info->num_channels = 0;
 
-	if (!IS_BROXTON(dev_priv))
+	if (INTEL_GEN(dev_priv) < 9)

drivers/gpu/drm/i915/i915_drv.c intel_get_dram_info(struct drm_i915_private *dev_priv) · line 1291

Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +7 -1
  		return;
 
-	ret = bxt_get_dram_info(dev_priv);
+	/* Need to calculate bandwidth only for Gen9 */
+	if (IS_BROXTON(dev_priv))
+		ret = bxt_get_dram_info(dev_priv);
+	else if (INTEL_GEN(dev_priv) == 9)
+		ret = skl_get_dram_info(dev_priv);
+	else
+		ret = skl_dram_get_channels_info(dev_priv);

I din't get this... why newer platforms only need this partial path?

Quoted 1 line

also this highlights that the names of the functions are confusing...

In gen9 platform we need complete DRAM info (channel configuration + bandwidth supported by DRAM) which will be used by bandwidth related WA, and only applicable for GEN9 platforms. Bspec:4380 (Gen9 Watermark Calculations: Workaround) But Channel info is applicable for all the platforms, This will be used to check if system has 16GB dimm or if memory channels are not symmetric.
BSpec:4381 (Retrieve Memory Latency Data)

I agree names seems little confusing I used following convention dram_info -> channels_info -> channel_info

Quoted 23 lines
Quoted 23 lines
drivers/gpu/drm/i915/i915_drv.c +6 -2
  	if (ret)
  		return;
 
-	DRM_DEBUG_KMS("DRAM bandwidth:%d KBps, total-channels: %u\n",
-		      dram_info->bandwidth_kbps, dram_info->num_channels);
+	if (dram_info->bandwidth_kbps)
+		sprintf(bandwidth_str, "%d KBps", dram_info->bandwidth_kbps);
+	else
+		sprintf(bandwidth_str, "unknown");
+	DRM_DEBUG_KMS("DRAM bandwidth:%s, total-channels: %u\n",
+		      bandwidth_str, dram_info->num_channels);
  	DRM_DEBUG_KMS("DRAM rank: %s rank\n",
  		      (dram_info->rank == I915_DRAM_RANK_DUAL) ?
  		      "dual" : "single");
drivers/gpu/drm/i915/i915_drv.h +0 -0
index 46f942fa7d60..2d12fc152b49 100644
@@ -2128,6 +2128,13 @@ struct drm_i915_private {
  	 */
  };
 
Quoted 6 lines

drivers/gpu/drm/i915/i915_drv.h struct drm_i915_private { · line 2135

Quoted 5 lines
drivers/gpu/drm/i915/i915_drv.h +5 -0
+struct dram_channel_info {
+	struct info {
+		u8 size, width, rank;
+	} l_info, s_info;
+	enum dram_rank rank;

why do we need duplicated rand information?

first one represents rank of each dimm left/right dimm. Second one stores the rank of channel.

-Mahesh

Quoted 28 lines
Quoted 28 lines
drivers/gpu/drm/i915/i915_drv.h +2 -0
+};
+
  static inline struct drm_i915_private *to_i915(const struct drm_device *dev)
  {
  	return container_of(dev, struct drm_i915_private, drm);
drivers/gpu/drm/i915/i915_reg.h +14 -0
index 66900d027570..e4d61167fb64 100644
@@ -9664,6 +9664,27 @@ enum skl_power_gate {
  #define  BXT_DRAM_SIZE_12GB			0x3
  #define  BXT_DRAM_SIZE_16GB			0x4
 
+#define SKL_MEMORY_FREQ_MULTIPLIER_HZ		266666666
+#define SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5E04)
+#define  SKL_REQ_DATA_MASK			(0xF << 0)
+
+#define SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x500C)
+#define SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5010)
+#define  SKL_DRAM_SIZE_MASK			0x3F
+#define  SKL_DRAM_SIZE_L_SHIFT			0
+#define  SKL_DRAM_SIZE_S_SHIFT			16
+#define  SKL_DRAM_WIDTH_MASK			0x3
+#define  SKL_DRAM_WIDTH_L_SHIFT			8
+#define  SKL_DRAM_WIDTH_S_SHIFT			24
+#define  SKL_DRAM_WIDTH_X8			0x0
+#define  SKL_DRAM_WIDTH_X16			0x1
Quoted 20 lines

drivers/gpu/drm/i915/i915_reg.h enum skl_power_gate { · line 9686

Quoted 6 lines
drivers/gpu/drm/i915/i915_reg.h +6 -0
+#define  SKL_DRAM_WIDTH_X32			0x2
+#define  SKL_DRAM_RANK_MASK			0x1
+#define  SKL_DRAM_RANK_L_SHIFT			10
+#define  SKL_DRAM_RANK_S_SHIFT			26
+#define  SKL_DRAM_RANK_SINGLE			0x0
+#define  SKL_DRAM_RANK_DUAL			0x1

again, spec pointers please.

Quoted 11 lines
drivers/gpu/drm/i915/i915_reg.h +1 -0
+
  /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
   * since on HSW we can't write to it using I915_WRITE. */
  #define D_COMP_HSW			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw

PATCH 3/5 drm/i915: Implement 16GB dimm wa for latency level-0

In reply to Mahesh Kumar

Memory with 16GB dimms require an increase of 1us in level-0 latency. This patch implements the same.
Bspec: 4381

changes since V1:
- s/memdev_info/dram_info
- make skl_is_16gb_dimm pure function

---
 drivers/gpu/drm/i915/i915_drv.c | 40 ++++++++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/i915_drv.h |  3 +++
 drivers/gpu/drm/i915/intel_pm.c | 13 +++++++++++++
 3 files changed, 54 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +38 -2
index ddf6bf9b500a..86bc2e685522 100644
@@ -1070,6 +1070,25 @@ static void intel_sanitize_options(struct drm_i915_private *dev_priv)
 	intel_gvt_sanitize_options(dev_priv);
 }
 
+static bool
+skl_is_16gb_dimm(u8 rank, u8 size, u8 width)
+{
+	if (size == 16 && width == SKL_DRAM_WIDTH_X8 &&
+	    rank == SKL_DRAM_RANK_SINGLE)
+		return true;
+	else if (size == 32 && width == SKL_DRAM_WIDTH_X8 &&
+		 rank == SKL_DRAM_RANK_DUAL)
+		return true;
+	else if (size == 8 && width == SKL_DRAM_WIDTH_X16 &&
+		 rank == SKL_DRAM_RANK_SINGLE)
+		return true;
+	else if (size == 16 && width == SKL_DRAM_WIDTH_X16 &&
+		 rank == SKL_DRAM_RANK_DUAL)
+		return true;
+
+	return false;
+}
+
 static int
 skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val)
 {
@@ -1077,6 +1096,7 @@ skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val)
 	u8 l_size, s_size;
 	u8 l_width, s_width;
 	enum dram_rank rank;
+	bool l_16gb_dimm, s_16gb_dimm;
 
 	if (!val)
 		return -1;
@@ -1103,6 +1123,13 @@ skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val)
 	else
 		rank = I915_DRAM_RANK_SINGLE;
 
+	l_16gb_dimm = skl_is_16gb_dimm(l_rank, l_size, l_width);
+	s_16gb_dimm = skl_is_16gb_dimm(s_rank, s_size, s_width);
+
+	if (l_16gb_dimm || s_16gb_dimm)
+		ch->is_16gb_dimm = true;
+	else
+		ch->is_16gb_dimm = false;
 	ch->l_info.size = l_size;
 	ch->s_info.size = s_size;
 	ch->l_info.width = l_width;
@@ -1137,6 +1164,8 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
 		return -EINVAL;
 	}
 
+	dram_info->valid_dimm = true;
+
 	/*
 	 * If any of the channel is single rank channel, worst case output
 	 * will be same as if single rank memory, so consider single rank
@@ -1152,6 +1181,10 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
 		DRM_INFO("couldn't get memory rank information\n");
 		return -EINVAL;
 	}
+
+	if (ch0.is_16gb_dimm || ch1.is_16gb_dimm)
+		dram_info->is_16gb_dimm = true;
+
 	return 0;
 }
 
@@ -1263,6 +1296,7 @@ bxt_get_dram_info(struct drm_i915_private *dev_priv)
 		return -EINVAL;
 	}
 
+	dram_info->valid_dimm = true;
 	dram_info->valid = true;
 	return 0;
 }
@@ -1275,6 +1309,8 @@ intel_get_dram_info(struct drm_i915_private *dev_priv)
 	int ret;
 
 	dram_info->valid = false;
+	dram_info->valid_dimm = false;
+	dram_info->is_16gb_dimm = false;
 	dram_info->rank = I915_DRAM_RANK_INVALID;
 	dram_info->bandwidth_kbps = 0;
 	dram_info->num_channels = 0;
@@ -1298,9 +1334,9 @@ intel_get_dram_info(struct drm_i915_private *dev_priv)
 		sprintf(bandwidth_str, "unknown");
 	DRM_DEBUG_KMS("DRAM bandwidth:%s, total-channels: %u\n",
 		      bandwidth_str, dram_info->num_channels);
-	DRM_DEBUG_KMS("DRAM rank: %s rank\n",
+	DRM_DEBUG_KMS("DRAM rank: %s rank 16GB-dimm:%s\n",
 		      (dram_info->rank == I915_DRAM_RANK_DUAL) ?
-		      "dual" : "single");
+		      "dual" : "single", yesno(dram_info->is_16gb_dimm));
 }
 
 /**
drivers/gpu/drm/i915/i915_drv.h +3 -0
index 2d12fc152b49..854f3c828e01 100644
@@ -1906,6 +1906,8 @@ struct drm_i915_private {
 
 	struct dram_info {
 		bool valid;
+		bool valid_dimm;
+		bool is_16gb_dimm;
 		u8 num_channels;
 		enum dram_rank {
 			I915_DRAM_RANK_INVALID = 0,
@@ -2133,6 +2135,7 @@ struct dram_channel_info {
 		u8 size, width, rank;
 	} l_info, s_info;
 	enum dram_rank rank;
+	bool is_16gb_dimm;
 };
 
 static inline struct drm_i915_private *to_i915(const struct drm_device *dev)
drivers/gpu/drm/i915/intel_pm.c +13 -0
index 7312ecb73415..2446f53adf21 100644
@@ -2874,6 +2874,19 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
 			}
 		}
 
+		/*
+		 * WA Level-0 adjustment for 16GB DIMMs: SKL+
+		 * If we could not get dimm info enable this WA to prevent from
+		 * any underrun. If not able to get Dimm info assume 16GB dimm
+		 * to avoid any underrun.
+		 */
+		if (dev_priv->dram_info.valid_dimm) {
+			if (dev_priv->dram_info.is_16gb_dimm)
+				wm[0] += 1;
+		} else {
+			wm[0] += 1;
+		}
+
 	} else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
 		uint64_t sskpd = I915_READ64(MCH_SSKPD);
 
Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#10 lore raw

Re: [PATCH 3/5] drm/i915: Implement 16GB dimm wa for latency level-0

Quoted 1 line · Mahesh Kumar

Bspec: 4381

Do we know that these numbers are stable?

I don't know if this form is common in the kernel, but in Mesa we specify the name of the page which should always allow readers to find it.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#11 lore raw

Re: [PATCH 3/5] drm/i915: Implement 16GB dimm wa for latency level-0

Hi Matt,

Quoted 3 lines · Matt Turner
Quoted 1 line · Mahesh Kumar

Bspec: 4381

Do we know that these numbers are stable?

yes these numbers are fixed in Bspec

Quoted 3 lines

I don't know if this form is common in the kernel, but in Mesa we specify the name of the page which should always allow readers to find it.

This is common practice in kernel to give Bspec Number reference instead of name of the page. -Mahesh

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#12 lore raw

Re: [PATCH 3/5] drm/i915: Implement 16GB dimm wa for latency level-0

Quoted 5 lines · Mahesh

Hi Matt,

Quoted 1 line · Matt Turner

On Thu, Jul 26, 2018 at 7:14 AM, Mahesh Kumar <[email protected]> wrote:

Quoted 8 lines
Quoted 2 lines
Quoted 1 line

Bspec: 4381

Do we know that these numbers are stable?

yes these numbers are fixed in Bspec

Quoted 3 lines

I don't know if this form is common in the kernel, but in Mesa we specify the name of the page which should always allow readers to find it.

This is common practice in kernel to give Bspec Number reference instead of name of the page.

Well, I believe Matt has a good point here.
It is stable for now and for a while, but we had seen changes on the web interface in use. Also this number doesn't help devs who don't use the web interface.

Quoted 6 lines

-Mahesh

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#13 lore raw

Re: [PATCH 3/5] drm/i915: Implement 16GB dimm wa for latency level-0

Hi,

Quoted 12 lines · Rodrigo Vivi
Quoted 11 lines · Mahesh

Hi Matt,

Quoted 3 lines · Matt Turner
Quoted 1 line · Mahesh Kumar

Bspec: 4381

Do we know that these numbers are stable?

yes these numbers are fixed in Bspec

Quoted 3 lines

I don't know if this form is common in the kernel, but in Mesa we specify the name of the page which should always allow readers to find it.

Quoted 6 lines
Quoted 2 lines

This is common practice in kernel to give Bspec Number reference instead of name of the page.

Well, I believe Matt has a good point here.
It is stable for now and for a while, but we had seen changes on the web interface in use. Also this number doesn't help devs who don't use the web interface.

sure, will update this in next version. Will float updated series once receive review comments on other patches.

-Mahesh

Quoted 7 lines
Quoted 7 lines

-Mahesh

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#14 lore raw

Re: [PATCH 3/5] drm/i915: Implement 16GB dimm wa for latency level-0

In reply to Mahesh Kumar
Quoted 28 lines · Mahesh Kumar

Memory with 16GB dimms require an increase of 1us in level-0 latency. This patch implements the same.
Bspec: 4381

changes since V1:
- s/memdev_info/dram_info
- make skl_is_16gb_dimm pure function

---
 drivers/gpu/drm/i915/i915_drv.c | 40 ++++++++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/i915_drv.h |  3 +++
 drivers/gpu/drm/i915/intel_pm.c | 13 +++++++++++++
 3 files changed, 54 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +5 -0
index ddf6bf9b500a..86bc2e685522 100644
@@ -1070,6 +1070,25 @@ static void intel_sanitize_options(struct drm_i915_private *dev_priv)
 	intel_gvt_sanitize_options(dev_priv);
 }
 
+static bool
+skl_is_16gb_dimm(u8 rank, u8 size, u8 width)
+{
+	if (size == 16 && width == SKL_DRAM_WIDTH_X8 &&
+	    rank == SKL_DRAM_RANK_SINGLE)

drivers/gpu/drm/i915/i915_drv.c static void intel_sanitize_options(struct drm_i915_private *dev_priv) · line 1087

Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +10 -0
+		return true;
+	else if (size == 32 && width == SKL_DRAM_WIDTH_X8 &&
+		 rank == SKL_DRAM_RANK_DUAL)
+		return true;
+	else if (size == 8 && width == SKL_DRAM_WIDTH_X16 &&
+		 rank == SKL_DRAM_RANK_SINGLE)
+		return true;
+	else if (size == 16 && width == SKL_DRAM_WIDTH_X16 &&
+		 rank == SKL_DRAM_RANK_DUAL)
+		return true;

nip: This is right, but it would be easier if order of checks
were in same order as spec. Well.. but no real need for change since I already checked ;)

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1099

Quoted 12 lines
drivers/gpu/drm/i915/i915_drv.c +5 -0
+
+	return false;
+}
+
 static int
 skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val)
 {
@@ -1077,6 +1096,7 @@ skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val)
 	u8 l_size, s_size;
 	u8 l_width, s_width;
 	enum dram_rank rank;
+	bool l_16gb_dimm, s_16gb_dimm;

I don't think we need this extra locals

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.c +0 -0
 	if (!val)
 		return -1;

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1132

Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +7 -0
@@ -1103,6 +1123,13 @@ skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val)
 	else
 		rank = I915_DRAM_RANK_SINGLE;
 
+	l_16gb_dimm = skl_is_16gb_dimm(l_rank, l_size, l_width);
+	s_16gb_dimm = skl_is_16gb_dimm(s_rank, s_size, s_width);
+
+	if (l_16gb_dimm || s_16gb_dimm)
+		ch->is_16gb_dimm = true;
+	else
+		ch->is_16gb_dimm = false;
	ch->is_16gb_dim = skl_is_16gb_dimm(l_rank, l_size, l_width) ||
			  skl_is_16gb_dimm(s_rank, s_size, s_width);
Quoted 82 lines
drivers/gpu/drm/i915/i915_drv.c +11 -2
 	ch->l_info.size = l_size;
 	ch->s_info.size = s_size;
 	ch->l_info.width = l_width;
@@ -1137,6 +1164,8 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
 		return -EINVAL;
 	}
 
+	dram_info->valid_dimm = true;
+
 	/*
 	 * If any of the channel is single rank channel, worst case output
 	 * will be same as if single rank memory, so consider single rank
@@ -1152,6 +1181,10 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
 		DRM_INFO("couldn't get memory rank information\n");
 		return -EINVAL;
 	}
+
+	if (ch0.is_16gb_dimm || ch1.is_16gb_dimm)
+		dram_info->is_16gb_dimm = true;
+
 	return 0;
 }
 
@@ -1263,6 +1296,7 @@ bxt_get_dram_info(struct drm_i915_private *dev_priv)
 		return -EINVAL;
 	}
 
+	dram_info->valid_dimm = true;
 	dram_info->valid = true;
 	return 0;
 }
@@ -1275,6 +1309,8 @@ intel_get_dram_info(struct drm_i915_private *dev_priv)
 	int ret;
 
 	dram_info->valid = false;
+	dram_info->valid_dimm = false;
+	dram_info->is_16gb_dimm = false;
 	dram_info->rank = I915_DRAM_RANK_INVALID;
 	dram_info->bandwidth_kbps = 0;
 	dram_info->num_channels = 0;
@@ -1298,9 +1334,9 @@ intel_get_dram_info(struct drm_i915_private *dev_priv)
 		sprintf(bandwidth_str, "unknown");
 	DRM_DEBUG_KMS("DRAM bandwidth:%s, total-channels: %u\n",
 		      bandwidth_str, dram_info->num_channels);
-	DRM_DEBUG_KMS("DRAM rank: %s rank\n",
+	DRM_DEBUG_KMS("DRAM rank: %s rank 16GB-dimm:%s\n",
 		      (dram_info->rank == I915_DRAM_RANK_DUAL) ?
-		      "dual" : "single");
+		      "dual" : "single", yesno(dram_info->is_16gb_dimm));
 }
 
 /**
drivers/gpu/drm/i915/i915_drv.h +3 -0
index 2d12fc152b49..854f3c828e01 100644
@@ -1906,6 +1906,8 @@ struct drm_i915_private {
 
 	struct dram_info {
 		bool valid;
+		bool valid_dimm;
+		bool is_16gb_dimm;
 		u8 num_channels;
 		enum dram_rank {
 			I915_DRAM_RANK_INVALID = 0,
@@ -2133,6 +2135,7 @@ struct dram_channel_info {
 		u8 size, width, rank;
 	} l_info, s_info;
 	enum dram_rank rank;
+	bool is_16gb_dimm;
 };
 
 static inline struct drm_i915_private *to_i915(const struct drm_device *dev)
drivers/gpu/drm/i915/intel_pm.c +1 -0
index 7312ecb73415..2446f53adf21 100644
@@ -2874,6 +2874,19 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
 			}
 		}
 
+		/*

drivers/gpu/drm/i915/intel_pm.c static void intel_read_wm_latency(struct drm_i915_private *dev_priv, · line 2887

Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +10 -0
+		 * WA Level-0 adjustment for 16GB DIMMs: SKL+
+		 * If we could not get dimm info enable this WA to prevent from
+		 * any underrun. If not able to get Dimm info assume 16GB dimm
+		 * to avoid any underrun.
+		 */
+		if (dev_priv->dram_info.valid_dimm) {
+			if (dev_priv->dram_info.is_16gb_dimm)
+				wm[0] += 1;
+		} else {
+			wm[0] += 1;

well... spec don't cover this case... I believe it is safe, but only concern would be this creating latency for other cases... just thinking loud, but I'm probably in favor of doing this anyway...

Quoted 12 lines
drivers/gpu/drm/i915/intel_pm.c +2 -0
+		}
+
 	} else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
 		uint64_t sskpd = I915_READ64(MCH_SSKPD);
 
Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#15 lore raw

PATCH 4/5 drm/i915/kbl+: Enable IPC only for symmetric memory configurations

In reply to Mahesh Kumar

IPC may cause underflows if not used with dual channel symmetric memory configuration. Disable IPC for non symmetric configurations in affected platforms.
Display WA #1141

---
 drivers/gpu/drm/i915/i915_drv.c | 43 ++++++++++++++++++++++++++++++++++++-----
 drivers/gpu/drm/i915/i915_drv.h |  1 +
 drivers/gpu/drm/i915/intel_pm.c |  2 +-
 3 files changed, 40 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +38 -5
index 86bc2e685522..2273664166bc 100644
@@ -1141,21 +1141,47 @@ skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val)
 	return 0;
 }
 
+static bool
+intel_is_dram_ipc_capable(struct drm_i915_private *dev_priv,
+			  u32 val_ch0, u32 val_ch1,
+			  struct dram_channel_info *ch0)
+{
+	/* Display WA #1141: SKL:all KBL:all CNL:A CNL:B */
+	if (INTEL_GEN(dev_priv) > 9 &&
+	    !IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_B0))
+		return true;
+
+	if (!IS_KABYLAKE(dev_priv) && !IS_SKYLAKE(dev_priv))
+		return true;
+
+	if (val_ch0 != val_ch1)
+		return false;
+
+	if (ch0->s_info.size == 0)
+		return true;
+	if (ch0->l_info.size == ch0->s_info.size &&
+	    ch0->l_info.width == ch0->s_info.width &&
+	    ch0->l_info.rank == ch0->s_info.rank)
+		return true;
+
+	return false;
+}
+
 static int
 skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
 {
 	struct dram_info *dram_info = &dev_priv->dram_info;
 	struct dram_channel_info ch0, ch1;
-	u32 val;
+	u32 val_ch0, val_ch1;
 	int ret;
 
-	val = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
-	ret = skl_dram_get_channel_info(&ch0, val);
+	val_ch0 = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
+	ret = skl_dram_get_channel_info(&ch0, val_ch0);
 	if (ret == 0)
 		dram_info->num_channels++;
 
-	val = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
-	ret = skl_dram_get_channel_info(&ch1, val);
+	val_ch1 = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
+	ret = skl_dram_get_channel_info(&ch1, val_ch1);
 	if (ret == 0)
 		dram_info->num_channels++;
 
@@ -1185,6 +1211,13 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
 	if (ch0.is_16gb_dimm || ch1.is_16gb_dimm)
 		dram_info->is_16gb_dimm = true;
 
+	if (intel_is_dram_ipc_capable(dev_priv, val_ch0, val_ch1, &ch0))
+		dev_priv->ipc_capable_mem = true;
+	else
+		dev_priv->ipc_capable_mem = false;
+
+	DRM_DEBUG_KMS("memory configuration is %sIPC capable\n",
+		      dev_priv->ipc_capable_mem ? "" : "not ");
 	return 0;
 }
 
drivers/gpu/drm/i915/i915_drv.h +1 -0
index 854f3c828e01..036d6554c017 100644
@@ -2112,6 +2112,7 @@ struct drm_i915_private {
 	bool chv_phy_assert[2];
 
 	bool ipc_enabled;
+	bool ipc_capable_mem;
 
 	/* Used to save the pipe-to-encoder mapping for audio */
 	struct intel_encoder *av_enc_map[I915_MAX_PIPES];
drivers/gpu/drm/i915/intel_pm.c +1 -1
index 2446f53adf21..39e400d5f555 100644
@@ -6097,7 +6097,7 @@ void intel_enable_ipc(struct drm_i915_private *dev_priv)
 	u32 val;
 
 	/* Display WA #0477 WaDisableIPC: skl */
-	if (IS_SKYLAKE(dev_priv)) {
+	if (IS_SKYLAKE(dev_priv) || !dev_priv->ipc_capable_mem) {
 		dev_priv->ipc_enabled = false;
 		return;
 	}
Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#16 lore raw

Re: [PATCH 4/5] drm/i915/kbl+: Enable IPC only for symmetric memory configurations

Quoted 17 lines · Mahesh Kumar

IPC may cause underflows if not used with dual channel symmetric memory configuration. Disable IPC for non symmetric configurations in affected platforms.
Display WA #1141

---
 drivers/gpu/drm/i915/i915_drv.c | 43 ++++++++++++++++++++++++++++++++++++-----
 drivers/gpu/drm/i915/i915_drv.h |  1 +
 drivers/gpu/drm/i915/intel_pm.c |  2 +-
 3 files changed, 40 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -0
index 86bc2e685522..2273664166bc 100644

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1147

Quoted 7 lines
drivers/gpu/drm/i915/i915_drv.c +4 -0
@@ -1141,21 +1141,47 @@ skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val)
 	return 0;
 }
 
+static bool
+intel_is_dram_ipc_capable(struct drm_i915_private *dev_priv,
+			  u32 val_ch0, u32 val_ch1,
+			  struct dram_channel_info *ch0)

what about
intel_is_dram_symmetric() ?

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1149

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+{
+	/* Display WA #1141: SKL:all KBL:all CNL:A CNL:B */

move this to the wa call, not the the function check...

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1151

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+	if (INTEL_GEN(dev_priv) > 9 &&
+	    !IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_B0))

please don't add CNL pre-prod wa

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1155

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.c +4 -0
+		return true;
+
+	if (!IS_KABYLAKE(dev_priv) && !IS_SKYLAKE(dev_priv))
+		return true;

actually remove all platforms checks here...

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1167

Quoted 12 lines
drivers/gpu/drm/i915/i915_drv.c +12 -0
+
+	if (val_ch0 != val_ch1)
+		return false;
+
+	if (ch0->s_info.size == 0)
+		return true;
+	if (ch0->l_info.size == ch0->s_info.size &&
+	    ch0->l_info.width == ch0->s_info.width &&
+	    ch0->l_info.rank == ch0->s_info.rank)
+		return true;
+
+	return false;

return (val_ch0 == val_ch1 && (ch0->s_info.size == 0 ||

       (ch0->l_info.size == ch0->s_info.size &&
         ch0->l_info.width == ch0->s_info.width &&
         ch0->l_info.rank == ch0->s_info.rank)))
Quoted 45 lines
drivers/gpu/drm/i915/i915_drv.c +14 -5
+}
 
+
 static int
 skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
 {
 	struct dram_info *dram_info = &dev_priv->dram_info;
 	struct dram_channel_info ch0, ch1;
-	u32 val;
+	u32 val_ch0, val_ch1;
 	int ret;
 
-	val = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
-	ret = skl_dram_get_channel_info(&ch0, val);
+	val_ch0 = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
+	ret = skl_dram_get_channel_info(&ch0, val_ch0);
 	if (ret == 0)
 		dram_info->num_channels++;
 
-	val = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
-	ret = skl_dram_get_channel_info(&ch1, val);
+	val_ch1 = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
+	ret = skl_dram_get_channel_info(&ch1, val_ch1);
 	if (ret == 0)
 		dram_info->num_channels++;
@@ -1185,6 +1211,13 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
 	if (ch0.is_16gb_dimm || ch1.is_16gb_dimm)
 		dram_info->is_16gb_dimm = true;
 
+	if (intel_is_dram_ipc_capable(dev_priv, val_ch0, val_ch1, &ch0))
+		dev_priv->ipc_capable_mem = true;
+	else
+		dev_priv->ipc_capable_mem = false;
+
+	DRM_DEBUG_KMS("memory configuration is %sIPC capable\n",
+		      dev_priv->ipc_capable_mem ? "" : "not ");
 	return 0;
 }
 
drivers/gpu/drm/i915/i915_drv.h +0 -0
index 854f3c828e01..036d6554c017 100644

drivers/gpu/drm/i915/i915_drv.h struct drm_i915_private { · line 2115

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -2112,6 +2112,7 @@ struct drm_i915_private {
 	bool chv_phy_assert[2];
 
 	bool ipc_enabled;
+	bool ipc_capable_mem;

I don't think we need to stage this...

Quoted 8 lines
drivers/gpu/drm/i915/i915_drv.h +0 -0
 	/* Used to save the pipe-to-encoder mapping for audio */
 	struct intel_encoder *av_enc_map[I915_MAX_PIPES];
drivers/gpu/drm/i915/intel_pm.c +0 -0
index 2446f53adf21..39e400d5f555 100644

drivers/gpu/drm/i915/intel_pm.c void intel_enable_ipc(struct drm_i915_private *dev_priv) · line 6101

Quoted 6 lines
drivers/gpu/drm/i915/intel_pm.c +1 -1
@@ -6097,7 +6097,7 @@ void intel_enable_ipc(struct drm_i915_private *dev_priv)
 	u32 val;
 
 	/* Display WA #0477 WaDisableIPC: skl */
-	if (IS_SKYLAKE(dev_priv)) {
+	if (IS_SKYLAKE(dev_priv) || !dev_priv->ipc_capable_mem) {
 		dev_priv->ipc_enabled = false;

This is not the WA 1141 for other platforms than SKL. Please only keep skl here.

For the other WA add 4us across all watermark levels

/* Display WA #1141: skl,kbl,cfl */
if ((IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) &&
intel_is_dram_symmetric())
levels += 4;

Quoted 9 lines
drivers/gpu/drm/i915/intel_pm.c +0 -1
 		return;
 	}
--

2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#17 lore raw

Re: [PATCH 4/5] drm/i915/kbl+: Enable IPC only for symmetric memory configurations

Hi,

Quoted 21 lines · Rodrigo Vivi
Quoted 20 lines · Mahesh Kumar

IPC may cause underflows if not used with dual channel symmetric memory configuration. Disable IPC for non symmetric configurations in affected platforms.
Display WA #1141

---
  drivers/gpu/drm/i915/i915_drv.c | 43 ++++++++++++++++++++++++++++++++++++-----
  drivers/gpu/drm/i915/i915_drv.h |  1 +
  drivers/gpu/drm/i915/intel_pm.c |  2 +-
  3 files changed, 40 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -0
index 86bc2e685522..2273664166bc 100644
@@ -1141,21 +1141,47 @@ skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val)
  	return 0;
  }
 
Quoted 6 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1147

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.c +4 -0
+static bool
+intel_is_dram_ipc_capable(struct drm_i915_private *dev_priv,
+			  u32 val_ch0, u32 val_ch1,
+			  struct dram_channel_info *ch0)

what about
intel_is_dram_symmetric() ?

sounds good.

Quoted 7 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1149

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+{
+	/* Display WA #1141: SKL:all KBL:all CNL:A CNL:B */

move this to the wa call, not the the function check...

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1151

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+	if (INTEL_GEN(dev_priv) > 9 &&
+	    !IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_B0))

please don't add CNL pre-prod wa

ok sure

Quoted 6 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1155

Quoted 5 lines
drivers/gpu/drm/i915/i915_drv.c +4 -0
+		return true;
+
+	if (!IS_KABYLAKE(dev_priv) && !IS_SKYLAKE(dev_priv))
+		return true;

actually remove all platforms checks here...

Agree will remove these checks, function will just return if memory is symmetric.

Quoted 64 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1167

Quoted 13 lines
drivers/gpu/drm/i915/i915_drv.c +12 -0
+
+	if (val_ch0 != val_ch1)
+		return false;
+
+	if (ch0->s_info.size == 0)
+		return true;
+	if (ch0->l_info.size == ch0->s_info.size &&
+	    ch0->l_info.width == ch0->s_info.width &&
+	    ch0->l_info.rank == ch0->s_info.rank)
+		return true;
+
+	return false;

return (val_ch0 == val_ch1 && (ch0->s_info.size == 0 ||

        (ch0->l_info.size == ch0->s_info.size &&
          ch0->l_info.width == ch0->s_info.width &&
          ch0->l_info.rank == ch0->s_info.rank)))
Quoted 46 lines
drivers/gpu/drm/i915/i915_drv.c +14 -5
+}
+
  static int
  skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
  {
  	struct dram_info *dram_info = &dev_priv->dram_info;
  	struct dram_channel_info ch0, ch1;
-	u32 val;
+	u32 val_ch0, val_ch1;
  	int ret;
 
-	val = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
-	ret = skl_dram_get_channel_info(&ch0, val);
+	val_ch0 = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
+	ret = skl_dram_get_channel_info(&ch0, val_ch0);
  	if (ret == 0)
  		dram_info->num_channels++;
 
-	val = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
-	ret = skl_dram_get_channel_info(&ch1, val);
+	val_ch1 = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
+	ret = skl_dram_get_channel_info(&ch1, val_ch1);
  	if (ret == 0)
  		dram_info->num_channels++;
 
@@ -1185,6 +1211,13 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
  	if (ch0.is_16gb_dimm || ch1.is_16gb_dimm)
  		dram_info->is_16gb_dimm = true;
 
+	if (intel_is_dram_ipc_capable(dev_priv, val_ch0, val_ch1, &ch0))
+		dev_priv->ipc_capable_mem = true;
+	else
+		dev_priv->ipc_capable_mem = false;
+
+	DRM_DEBUG_KMS("memory configuration is %sIPC capable\n",
+		      dev_priv->ipc_capable_mem ? "" : "not ");
  	return 0;
  }
 
drivers/gpu/drm/i915/i915_drv.h +0 -0
index 854f3c828e01..036d6554c017 100644
@@ -2112,6 +2112,7 @@ struct drm_i915_private {
  	bool chv_phy_assert[2];
 
Quoted 3 lines

drivers/gpu/drm/i915/i915_drv.h struct drm_i915_private { · line 2115

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.h +1 -0
  	bool ipc_enabled;
+	bool ipc_capable_mem;

I don't think we need to stage this...

With above changes storing this info is not needed, But we need to keep a flag in dram_info to check if "memory is symmetric", Otherwise we need to compute all the memory related info again.

-Mahesh

Quoted 15 lines

drivers/gpu/drm/i915/intel_pm.c void intel_enable_ipc(struct drm_i915_private *dev_priv) · line 6101

Quoted 13 lines
drivers/gpu/drm/i915/i915_drv.h +0 -0
  	/* Used to save the pipe-to-encoder mapping for audio */
  	struct intel_encoder *av_enc_map[I915_MAX_PIPES];
drivers/gpu/drm/i915/intel_pm.c +1 -1
index 2446f53adf21..39e400d5f555 100644
@@ -6097,7 +6097,7 @@ void intel_enable_ipc(struct drm_i915_private *dev_priv)
  	u32 val;
 
  	/* Display WA #0477 WaDisableIPC: skl */
-	if (IS_SKYLAKE(dev_priv)) {
+	if (IS_SKYLAKE(dev_priv) || !dev_priv->ipc_capable_mem) {
  		dev_priv->ipc_enabled = false;

This is not the WA 1141 for other platforms than SKL. Please only keep skl here.

Quoted 16 lines

For the other WA add 4us across all watermark levels

/* Display WA #1141: skl,kbl,cfl */
if ((IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) &&

    intel_is_dram_symmetric())
    levels += 4;
Quoted 9 lines
drivers/gpu/drm/i915/intel_pm.c +0 -1
  		return;
  	}
--

2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#18 lore raw

Re: [PATCH 4/5] drm/i915/kbl+: Enable IPC only for symmetric memory configurations

Hi,

Quoted 114 lines · Mahesh

Hi,

Quoted 23 lines · Rodrigo Vivi
Quoted 22 lines · Mahesh Kumar

IPC may cause underflows if not used with dual channel symmetric memory configuration. Disable IPC for non symmetric configurations in affected platforms.
Display WA #1141

---
  drivers/gpu/drm/i915/i915_drv.c | 43
++++++++++++++++++++++++++++++++++++-----
  drivers/gpu/drm/i915/i915_drv.h |  1 +
  drivers/gpu/drm/i915/intel_pm.c |  2 +-

  3 files changed, 40 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -0
index 86bc2e685522..2273664166bc 100644
@@ -1141,21 +1141,47 @@ skl_dram_get_channel_info(struct 
 dram_channel_info *ch, u32 val)
       return 0;
   }
 
Quoted 6 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1147

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.c +4 -0
+static bool
+intel_is_dram_ipc_capable(struct drm_i915_private *dev_priv,
+              u32 val_ch0, u32 val_ch1,
+              struct dram_channel_info *ch0)

what about
intel_is_dram_symmetric() ?

sounds good.

Quoted 7 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1149

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+{
+    /* Display WA #1141: SKL:all KBL:all CNL:A CNL:B */

move this to the wa call, not the the function check...

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1151

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+    if (INTEL_GEN(dev_priv) > 9 &&
+        !IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_B0))

please don't add CNL pre-prod wa

ok sure

Quoted 6 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1155

Quoted 5 lines
drivers/gpu/drm/i915/i915_drv.c +4 -0
+        return true;
+
+    if (!IS_KABYLAKE(dev_priv) && !IS_SKYLAKE(dev_priv))
+        return true;

actually remove all platforms checks here...

Agree will remove these checks, function will just return if memory is symmetric.

Quoted 65 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1167

Quoted 13 lines
drivers/gpu/drm/i915/i915_drv.c +12 -0
+
+    if (val_ch0 != val_ch1)
+        return false;
+
+    if (ch0->s_info.size == 0)
+        return true;
+    if (ch0->l_info.size == ch0->s_info.size &&
+        ch0->l_info.width == ch0->s_info.width &&
+        ch0->l_info.rank == ch0->s_info.rank)
+        return true;
+
+    return false;

return (val_ch0 == val_ch1 && (ch0->s_info.size == 0 || (ch0->l_info.size == ch0->s_info.size && ch0->l_info.width == ch0->s_info.width && ch0->l_info.rank == ch0->s_info.rank)))

Quoted 47 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+}
+

  static int
  skl_dram_get_channels_info(struct drm_i915_private *dev_priv) {
      struct dram_info *dram_info = &dev_priv->dram_info; struct dram_channel_info ch0, ch1;
-    u32 val;
+    u32 val_ch0, val_ch1;
      int ret;

-    val = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN); -    ret = skl_dram_get_channel_info(&ch0, val);
+    val_ch0 = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN); +    ret = skl_dram_get_channel_info(&ch0, val_ch0); if (ret == 0)
          dram_info->num_channels++;

-    val = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN); -    ret = skl_dram_get_channel_info(&ch1, val);
+    val_ch1 = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN); +    ret = skl_dram_get_channel_info(&ch1, val_ch1); if (ret == 0)
          dram_info->num_channels++;

drivers/gpu/drm/i915/i915_drv.c +7 -0
@@ -1185,6 +1211,13 @@ skl_dram_get_channels_info(struct 
 drm_i915_private *dev_priv)
       if (ch0.is_16gb_dimm || ch1.is_16gb_dimm)
           dram_info->is_16gb_dimm = true;
 
+    if (intel_is_dram_ipc_capable(dev_priv, val_ch0, val_ch1, &ch0))
+        dev_priv->ipc_capable_mem = true;
+    else
+        dev_priv->ipc_capable_mem = false;
+
+    DRM_DEBUG_KMS("memory configuration is %sIPC capable\n",
+              dev_priv->ipc_capable_mem ? "" : "not ");
       return 0;
   }
drivers/gpu/drm/i915/i915_drv.h +0 -0
index 854f3c828e01..036d6554c017 100644
@@ -2112,6 +2112,7 @@ struct drm_i915_private {
       bool chv_phy_assert[2];
 
Quoted 28 lines
Quoted 3 lines

drivers/gpu/drm/i915/i915_drv.h struct drm_i915_private { · line 2115

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.h +1 -0
       bool ipc_enabled;
+    bool ipc_capable_mem;

I don't think we need to stage this...

With above changes storing this info is not needed, But we need to keep a flag in dram_info to check if "memory is symmetric", Otherwise we need to compute all the memory related info again.

-Mahesh

Quoted 22 lines
Quoted 7 lines
drivers/gpu/drm/i915/i915_drv.h +0 -0
       /* Used to save the pipe-to-encoder mapping for audio */
       struct intel_encoder *av_enc_map[I915_MAX_PIPES];
drivers/gpu/drm/i915/intel_pm.c +0 -0
index 2446f53adf21..39e400d5f555 100644

drivers/gpu/drm/i915/intel_pm.c void intel_enable_ipc(struct drm_i915_private · line 6102

Quoted 7 lines
drivers/gpu/drm/i915/intel_pm.c +1 -1
@@ -6097,7 +6097,7 @@ void intel_enable_ipc(struct drm_i915_private 
 *dev_priv)
       u32 val;
 
       /* Display WA #0477 WaDisableIPC: skl */
-    if (IS_SKYLAKE(dev_priv)) {
+    if (IS_SKYLAKE(dev_priv) || !dev_priv->ipc_capable_mem) {
           dev_priv->ipc_enabled = false;

This is not the WA 1141 for other platforms than SKL. Please only keep skl here.

For the other WA add 4us across all watermark levels

/* Display WA #1141: skl,kbl,cfl */
if ((IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) && intel_is_dram_symmetric())
    levels += 4;

Adding 4us in latency is already taken care in skl_compute_plane_wm. Will handle here, enabling of IPC only if memory is symmetric.

-Mahesh

Quoted 11 lines
Quoted 10 lines
Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +0 -0
           return;

      }

Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#19 lore raw

Re: [PATCH 4/5] drm/i915/kbl+: Enable IPC only for symmetric memory configurations

Quoted 147 lines · Mahesh

Hi,

Quoted 143 lines · Mahesh

Hi,

Quoted 24 lines · Rodrigo Vivi
Quoted 23 lines · Mahesh Kumar

IPC may cause underflows if not used with dual channel symmetric memory configuration. Disable IPC for non symmetric configurations in affected platforms.
Display WA #1141

---
  drivers/gpu/drm/i915/i915_drv.c | 43
++++++++++++++++++++++++++++++++++++-----
  drivers/gpu/drm/i915/i915_drv.h |  1 +
  drivers/gpu/drm/i915/intel_pm.c |  2 +-

  3 files changed, 40 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -0
index 86bc2e685522..2273664166bc 100644
@@ -1141,21 +1141,47 @@ skl_dram_get_channel_info(struct
 dram_channel_info *ch, u32 val)
       return 0;
   }
 
Quoted 6 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1147

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.c +4 -0
+static bool
+intel_is_dram_ipc_capable(struct drm_i915_private *dev_priv,
+              u32 val_ch0, u32 val_ch1,
+              struct dram_channel_info *ch0)

what about
intel_is_dram_symmetric() ?

sounds good.

Quoted 7 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1149

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+{
+    /* Display WA #1141: SKL:all KBL:all CNL:A CNL:B */

move this to the wa call, not the the function check...

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1151

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+    if (INTEL_GEN(dev_priv) > 9 &&
+        !IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_B0))

please don't add CNL pre-prod wa

ok sure

Quoted 6 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1155

Quoted 5 lines
drivers/gpu/drm/i915/i915_drv.c +4 -0
+        return true;
+
+    if (!IS_KABYLAKE(dev_priv) && !IS_SKYLAKE(dev_priv))
+        return true;

actually remove all platforms checks here...

Agree will remove these checks, function will just return if memory is symmetric.

Quoted 66 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1167

Quoted 13 lines
drivers/gpu/drm/i915/i915_drv.c +12 -0
+
+    if (val_ch0 != val_ch1)
+        return false;
+
+    if (ch0->s_info.size == 0)
+        return true;
+    if (ch0->l_info.size == ch0->s_info.size &&
+        ch0->l_info.width == ch0->s_info.width &&
+        ch0->l_info.rank == ch0->s_info.rank)
+        return true;
+
+    return false;

return (val_ch0 == val_ch1 && (ch0->s_info.size == 0 || (ch0->l_info.size == ch0->s_info.size && ch0->l_info.width == ch0->s_info.width && ch0->l_info.rank == ch0->s_info.rank)))

Quoted 48 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+}
+

  static int
  skl_dram_get_channels_info(struct drm_i915_private *dev_priv) {
      struct dram_info *dram_info = &dev_priv->dram_info; struct dram_channel_info ch0, ch1;
-    u32 val;
+    u32 val_ch0, val_ch1;
      int ret;

-    val = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN); -    ret = skl_dram_get_channel_info(&ch0, val);
+    val_ch0 = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN); +    ret = skl_dram_get_channel_info(&ch0, val_ch0); if (ret == 0)
          dram_info->num_channels++;

-    val = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN); -    ret = skl_dram_get_channel_info(&ch1, val);
+    val_ch1 = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN); +    ret = skl_dram_get_channel_info(&ch1, val_ch1); if (ret == 0)
          dram_info->num_channels++;

drivers/gpu/drm/i915/i915_drv.c +7 -0
@@ -1185,6 +1211,13 @@ skl_dram_get_channels_info(struct
 drm_i915_private *dev_priv)
       if (ch0.is_16gb_dimm || ch1.is_16gb_dimm)
           dram_info->is_16gb_dimm = true;
 
+    if (intel_is_dram_ipc_capable(dev_priv, val_ch0, val_ch1, &ch0))
+        dev_priv->ipc_capable_mem = true;
+    else
+        dev_priv->ipc_capable_mem = false;
+
+    DRM_DEBUG_KMS("memory configuration is %sIPC capable\n",
+              dev_priv->ipc_capable_mem ? "" : "not ");
       return 0;
   }
drivers/gpu/drm/i915/i915_drv.h +0 -0
index 854f3c828e01..036d6554c017 100644
@@ -2112,6 +2112,7 @@ struct drm_i915_private {
       bool chv_phy_assert[2];
 
Quoted 3 lines

drivers/gpu/drm/i915/i915_drv.h struct drm_i915_private { · line 2115

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.h +1 -0
       bool ipc_enabled;
+    bool ipc_capable_mem;

I don't think we need to stage this...

With above changes storing this info is not needed, But we need to keep a flag in dram_info to check if "memory is symmetric", Otherwise we need to compute all the memory related info again.

-Mahesh

Quoted 18 lines
Quoted 8 lines
drivers/gpu/drm/i915/i915_drv.h +0 -0
       /* Used to save the pipe-to-encoder mapping for audio */
       struct intel_encoder *av_enc_map[I915_MAX_PIPES];
drivers/gpu/drm/i915/intel_pm.c +0 -0
index 2446f53adf21..39e400d5f555 100644

drivers/gpu/drm/i915/intel_pm.c void intel_enable_ipc(struct · line 6102

Quoted 7 lines
drivers/gpu/drm/i915/intel_pm.c +1 -1
@@ -6097,7 +6097,7 @@ void intel_enable_ipc(struct
 drm_i915_private *dev_priv)
       u32 val;
 
       /* Display WA #0477 WaDisableIPC: skl */
-    if (IS_SKYLAKE(dev_priv)) {
+    if (IS_SKYLAKE(dev_priv) || !dev_priv->ipc_capable_mem) {
           dev_priv->ipc_enabled = false;

This is not the WA 1141 for other platforms than SKL. Please only keep skl here.

Quoted 8 lines
Quoted 6 lines
Quoted 6 lines

For the other WA add 4us across all watermark levels

/* Display WA #1141: skl,kbl,cfl */
if ((IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) && intel_is_dram_symmetric())
    levels += 4;

Adding 4us in latency is already taken care in skl_compute_plane_wm. Will handle here, enabling of IPC only if memory is symmetric.

But WA1141 describe that we only need to avoid IPC on SKL... not on every gen9... Everywhere else the 4s should be enough.

so if the 4us is already in place maybe the patch that we need is to only apply the 4us if memory is symmetric and not skl.

Quoted 14 lines

-Mahesh

Quoted 11 lines
Quoted 10 lines
Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +0 -0
           return;

      }

Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#20 lore raw

Re: [PATCH 4/5] drm/i915/kbl+: Enable IPC only for symmetric memory configurations

Hi,

Quoted 152 lines · Rodrigo Vivi
Quoted 151 lines · Mahesh

Hi,

Quoted 147 lines · Mahesh

Hi,

Quoted 24 lines · Rodrigo Vivi
Quoted 23 lines · Mahesh Kumar

IPC may cause underflows if not used with dual channel symmetric memory configuration. Disable IPC for non symmetric configurations in affected platforms.
Display WA #1141

---
   drivers/gpu/drm/i915/i915_drv.c | 43
++++++++++++++++++++++++++++++++++++-----
   drivers/gpu/drm/i915/i915_drv.h |  1 +
   drivers/gpu/drm/i915/intel_pm.c |  2 +-
   3 files changed, 40 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -0
index 86bc2e685522..2273664166bc 100644
@@ -1141,21 +1141,47 @@ skl_dram_get_channel_info(struct
 dram_channel_info *ch, u32 val)
       return 0;
   }
 
Quoted 6 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1147

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.c +4 -0
+static bool
+intel_is_dram_ipc_capable(struct drm_i915_private *dev_priv,
+              u32 val_ch0, u32 val_ch1,
+              struct dram_channel_info *ch0)

what about
intel_is_dram_symmetric() ?

sounds good.

Quoted 7 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1149

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+{
+    /* Display WA #1141: SKL:all KBL:all CNL:A CNL:B */

move this to the wa call, not the the function check...

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1151

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+    if (INTEL_GEN(dev_priv) > 9 &&
+        !IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_B0))

please don't add CNL pre-prod wa

ok sure

Quoted 5 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1155

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.c +4 -0
+        return true;
+
+    if (!IS_KABYLAKE(dev_priv) && !IS_SKYLAKE(dev_priv))
+        return true;

actually remove all platforms checks here...

Agree will remove these checks, function will just return if memory is symmetric.

Quoted 65 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1167

Quoted 12 lines
drivers/gpu/drm/i915/i915_drv.c +12 -0
+
+    if (val_ch0 != val_ch1)
+        return false;
+
+    if (ch0->s_info.size == 0)
+        return true;
+    if (ch0->l_info.size == ch0->s_info.size &&
+        ch0->l_info.width == ch0->s_info.width &&
+        ch0->l_info.rank == ch0->s_info.rank)
+        return true;
+
+    return false;

return (val_ch0 == val_ch1 && (ch0->s_info.size == 0 ||
        (ch0->l_info.size == ch0->s_info.size && ch0->l_info.width == ch0->s_info.width && ch0->l_info.rank == ch0->s_info.rank)))

Quoted 48 lines
drivers/gpu/drm/i915/i915_drv.c +14 -5
+}
+
   static int
   skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
   {
       struct dram_info *dram_info = &dev_priv->dram_info;
       struct dram_channel_info ch0, ch1;
-    u32 val;
+    u32 val_ch0, val_ch1;
       int ret;
 
-    val = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
-    ret = skl_dram_get_channel_info(&ch0, val);
+    val_ch0 = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
+    ret = skl_dram_get_channel_info(&ch0, val_ch0);
       if (ret == 0)
           dram_info->num_channels++;
 
-    val = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
-    ret = skl_dram_get_channel_info(&ch1, val);
+    val_ch1 = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
+    ret = skl_dram_get_channel_info(&ch1, val_ch1);
       if (ret == 0)
           dram_info->num_channels++;
@@ -1185,6 +1211,13 @@ skl_dram_get_channels_info(struct
 drm_i915_private *dev_priv)
       if (ch0.is_16gb_dimm || ch1.is_16gb_dimm)
           dram_info->is_16gb_dimm = true;
 
+    if (intel_is_dram_ipc_capable(dev_priv, val_ch0, val_ch1, &ch0))
+        dev_priv->ipc_capable_mem = true;
+    else
+        dev_priv->ipc_capable_mem = false;
+
+    DRM_DEBUG_KMS("memory configuration is %sIPC capable\n",
+              dev_priv->ipc_capable_mem ? "" : "not ");
       return 0;
   }
drivers/gpu/drm/i915/i915_drv.h +0 -0
index 854f3c828e01..036d6554c017 100644
@@ -2112,6 +2112,7 @@ struct drm_i915_private {
       bool chv_phy_assert[2];
 
Quoted 3 lines

drivers/gpu/drm/i915/i915_drv.h struct drm_i915_private { · line 2115

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.h +1 -0
       bool ipc_enabled;
+    bool ipc_capable_mem;

I don't think we need to stage this...

With above changes storing this info is not needed, But we need to keep a flag in dram_info to check if "memory is symmetric", Otherwise we need to compute all the memory related info again.

-Mahesh

Quoted 24 lines
Quoted 8 lines
drivers/gpu/drm/i915/i915_drv.h +0 -0
       /* Used to save the pipe-to-encoder mapping for audio */
       struct intel_encoder *av_enc_map[I915_MAX_PIPES];
drivers/gpu/drm/i915/intel_pm.c +0 -0
index 2446f53adf21..39e400d5f555 100644

drivers/gpu/drm/i915/intel_pm.c void intel_enable_ipc(struct · line 6102

Quoted 7 lines
drivers/gpu/drm/i915/intel_pm.c +1 -1
@@ -6097,7 +6097,7 @@ void intel_enable_ipc(struct
 drm_i915_private *dev_priv)
       u32 val;
 
       /* Display WA #0477 WaDisableIPC: skl */
-    if (IS_SKYLAKE(dev_priv)) {
+    if (IS_SKYLAKE(dev_priv) || !dev_priv->ipc_capable_mem) {
           dev_priv->ipc_enabled = false;

This is not the WA 1141 for other platforms than SKL. Please only keep skl here.

For the other WA add 4us across all watermark levels

/* Display WA #1141: skl,kbl,cfl */
if ((IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) &&
    intel_is_dram_symmetric())
    levels += 4;

Quoted 7 lines
Quoted 2 lines

Adding 4us in latency is already taken care in skl_compute_plane_wm. Will handle here, enabling of IPC only if memory is symmetric.

But WA1141 describe that we only need to avoid IPC on SKL... not on every gen9... Everywhere else the 4s should be enough.

so if the 4us is already in place maybe the patch that we need is to only apply the 4us if memory is symmetric and not skl.

WA also says enable IPC only if memory is symmetric,
<KBL WA: When IPC is enabled, watermark latency values must be increased by 4us across all levels. IPC must be enabled only with dual channel symmetric memory configurations.>

-Mahesh

Quoted 7 lines
Quoted 7 lines

-Mahesh

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
drivers/gpu/drm/i915/intel_pm.c +0 -0
           return;

      }

Signature · 1 line
2.16.2
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#21 lore raw

Re: [PATCH 4/5] drm/i915/kbl+: Enable IPC only for symmetric memory configurations

Quoted 161 lines · Mahesh

Hi,

Quoted 157 lines · Rodrigo Vivi
Quoted 145 lines · Mahesh

Hi,

Quoted 141 lines · Mahesh

Hi,

Quoted 24 lines · Rodrigo Vivi
Quoted 23 lines · Mahesh Kumar

IPC may cause underflows if not used with dual channel symmetric memory configuration. Disable IPC for non symmetric configurations in affected platforms.
Display WA #1141

---
   drivers/gpu/drm/i915/i915_drv.c | 43
++++++++++++++++++++++++++++++++++++-----
   drivers/gpu/drm/i915/i915_drv.h |  1 +
   drivers/gpu/drm/i915/intel_pm.c |  2 +-
   3 files changed, 40 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -0
index 86bc2e685522..2273664166bc 100644
@@ -1141,21 +1141,47 @@ skl_dram_get_channel_info(struct
 dram_channel_info *ch, u32 val)
       return 0;
   }
 
Quoted 6 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1147

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.c +4 -0
+static bool
+intel_is_dram_ipc_capable(struct drm_i915_private *dev_priv,
+              u32 val_ch0, u32 val_ch1,
+              struct dram_channel_info *ch0)

what about
intel_is_dram_symmetric() ?

sounds good.

Quoted 7 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1149

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+{
+    /* Display WA #1141: SKL:all KBL:all CNL:A CNL:B */

move this to the wa call, not the the function check...

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1151

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.c +2 -0
+    if (INTEL_GEN(dev_priv) > 9 &&
+        !IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_B0))

please don't add CNL pre-prod wa

ok sure

Quoted 5 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1155

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.c +4 -0
+        return true;
+
+    if (!IS_KABYLAKE(dev_priv) && !IS_SKYLAKE(dev_priv))
+        return true;

actually remove all platforms checks here...

Agree will remove these checks, function will just return if memory is symmetric.

Quoted 65 lines

drivers/gpu/drm/i915/i915_drv.c skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) · line 1167

Quoted 12 lines
drivers/gpu/drm/i915/i915_drv.c +12 -0
+
+    if (val_ch0 != val_ch1)
+        return false;
+
+    if (ch0->s_info.size == 0)
+        return true;
+    if (ch0->l_info.size == ch0->s_info.size &&
+        ch0->l_info.width == ch0->s_info.width &&
+        ch0->l_info.rank == ch0->s_info.rank)
+        return true;
+
+    return false;

return (val_ch0 == val_ch1 && (ch0->s_info.size == 0 ||
        (ch0->l_info.size == ch0->s_info.size && ch0->l_info.width == ch0->s_info.width && ch0->l_info.rank == ch0->s_info.rank)))

Quoted 48 lines
drivers/gpu/drm/i915/i915_drv.c +14 -5
+}
+
   static int
   skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
   {
       struct dram_info *dram_info = &dev_priv->dram_info;
       struct dram_channel_info ch0, ch1;
-    u32 val;
+    u32 val_ch0, val_ch1;
       int ret;
 
-    val = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
-    ret = skl_dram_get_channel_info(&ch0, val);
+    val_ch0 = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
+    ret = skl_dram_get_channel_info(&ch0, val_ch0);
       if (ret == 0)
           dram_info->num_channels++;
 
-    val = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
-    ret = skl_dram_get_channel_info(&ch1, val);
+    val_ch1 = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
+    ret = skl_dram_get_channel_info(&ch1, val_ch1);
       if (ret == 0)
           dram_info->num_channels++;
@@ -1185,6 +1211,13 @@ skl_dram_get_channels_info(struct
 drm_i915_private *dev_priv)
       if (ch0.is_16gb_dimm || ch1.is_16gb_dimm)
           dram_info->is_16gb_dimm = true;
 
+    if (intel_is_dram_ipc_capable(dev_priv, val_ch0, val_ch1, &ch0))
+        dev_priv->ipc_capable_mem = true;
+    else
+        dev_priv->ipc_capable_mem = false;
+
+    DRM_DEBUG_KMS("memory configuration is %sIPC capable\n",
+              dev_priv->ipc_capable_mem ? "" : "not ");
       return 0;
   }
drivers/gpu/drm/i915/i915_drv.h +0 -0
index 854f3c828e01..036d6554c017 100644
@@ -2112,6 +2112,7 @@ struct drm_i915_private {
       bool chv_phy_assert[2];
 
Quoted 3 lines

drivers/gpu/drm/i915/i915_drv.h struct drm_i915_private { · line 2115

Quoted 2 lines
drivers/gpu/drm/i915/i915_drv.h +1 -0
       bool ipc_enabled;
+    bool ipc_capable_mem;

I don't think we need to stage this...

With above changes storing this info is not needed, But we need to keep a flag in dram_info to check if "memory is symmetric", Otherwise we need to compute all the memory related info again.

-Mahesh

Quoted 18 lines
Quoted 8 lines
drivers/gpu/drm/i915/i915_drv.h +0 -0
       /* Used to save the pipe-to-encoder mapping for audio */
       struct intel_encoder *av_enc_map[I915_MAX_PIPES];
drivers/gpu/drm/i915/intel_pm.c +0 -0
index 2446f53adf21..39e400d5f555 100644

drivers/gpu/drm/i915/intel_pm.c void intel_enable_ipc(struct · line 6102

Quoted 7 lines
drivers/gpu/drm/i915/intel_pm.c +1 -1
@@ -6097,7 +6097,7 @@ void intel_enable_ipc(struct
 drm_i915_private *dev_priv)
       u32 val;
 
       /* Display WA #0477 WaDisableIPC: skl */
-    if (IS_SKYLAKE(dev_priv)) {
+    if (IS_SKYLAKE(dev_priv) || !dev_priv->ipc_capable_mem) {
           dev_priv->ipc_enabled = false;

This is not the WA 1141 for other platforms than SKL. Please only keep skl here.

Quoted 8 lines
Quoted 6 lines
Quoted 6 lines

For the other WA add 4us across all watermark levels

/* Display WA #1141: skl,kbl,cfl */
if ((IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) &&
    intel_is_dram_symmetric())
    levels += 4;

Adding 4us in latency is already taken care in skl_compute_plane_wm. Will handle here, enabling of IPC only if memory is symmetric.

But WA1141 describe that we only need to avoid IPC on SKL... not on every gen9... Everywhere else the 4s should be enough.

Quoted 6 lines
Quoted 2 lines

so if the 4us is already in place maybe the patch that we need is to only apply the 4us if memory is symmetric and not skl.

WA also says enable IPC only if memory is symmetric,
<KBL WA: When IPC is enabled, watermark latency values must be increased by 4us across all levels.
IPC must be enabled only with dual channel symmetric memory configurations.>

Oh! Indeed. I'm sorry..

so we need something like:

/* Display WA #0477 WaDisableIPC: skl */
/* Display WA #1141: skl,kbl,cfl */
if (IS_SKYLAKE(dev_priv) ||

    ((IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) &&
      !intel_is_dram_symmetric())
     	  dev_priv->ipc_enabled = false;
Quoted 18 lines

-Mahesh

Quoted 15 lines
Quoted 15 lines

-Mahesh

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
drivers/gpu/drm/i915/intel_pm.c +0 -0
           return;

      }

Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#22 lore raw

PATCH 5/5 drm/i915/skl+: don't trust IPC value set by BIOS

In reply to Mahesh Kumar

If KMS decide to disable IPC make sure we override IPC configuration set by BIOS.

---
 drivers/gpu/drm/i915/intel_pm.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +1 -3
index 39e400d5f555..77b34fe546a8 100644
@@ -6097,10 +6097,8 @@ void intel_enable_ipc(struct drm_i915_private *dev_priv)
 	u32 val;
 
 	/* Display WA #0477 WaDisableIPC: skl */
-	if (IS_SKYLAKE(dev_priv) || !dev_priv->ipc_capable_mem) {
+	if (IS_SKYLAKE(dev_priv) || !dev_priv->ipc_capable_mem)
 		dev_priv->ipc_enabled = false;
-		return;
-	}
 
 	val = I915_READ(DISP_ARB_CTL2);
 
Signature · 6 lines
2.16.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#23 lore raw

✗ Fi.CI.SPARSE: warning for Decode memdev info and bandwidth and implemnt latency WA (rev2)

In reply to Mahesh Kumar
== Series Details ==

== Series Details ==

Series: Decode memdev info and bandwidth and implemnt latency WA (rev2)
URL : https://patchwork.freedesktop.org/series/46481/
State : warning

== Summary ==

$ dim sparse origin/drm-tip
Commit: drm/i915/bxt: Decode memory bandwidth and parameters
-drivers/gpu/drm/i915/selftests/../i915_drv.h:3645:16: warning: expression using sizeof(void)
+drivers/gpu/drm/i915/selftests/../i915_drv.h:3656:16: warning: expression using sizeof(void)

Commit: drm/i915/skl+: Decode memory bandwidth and parameters +drivers/gpu/drm/i915/i915_drv.c:1149:35: warning: expression using sizeof(void) +drivers/gpu/drm/i915/i915_drv.c:1149:35: warning: expression using sizeof(void) -drivers/gpu/drm/i915/selftests/../i915_drv.h:3656:16: warning: expression using sizeof(void) +drivers/gpu/drm/i915/selftests/../i915_drv.h:3663:16: warning: expression using sizeof(void)

Commit: drm/i915: Implement 16GB dimm wa for latency level-0 -drivers/gpu/drm/i915/selftests/../i915_drv.h:3663:16: warning: expression using sizeof(void) +drivers/gpu/drm/i915/selftests/../i915_drv.h:3666:16: warning: expression using sizeof(void)

Commit: drm/i915/kbl+: Enable IPC only for symmetric memory configurations -drivers/gpu/drm/i915/selftests/../i915_drv.h:3666:16: warning: expression using sizeof(void) +drivers/gpu/drm/i915/selftests/../i915_drv.h:3667:16: warning: expression using sizeof(void)

Commit: drm/i915/skl+: don't trust IPC value set by BIOS Okay!

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#24 lore raw

✓ Fi.CI.BAT: success for Decode memdev info and bandwidth and implemnt latency WA (rev2)

In reply to Mahesh Kumar
== Series Details ==

== Series Details ==

Series: Decode memdev info and bandwidth and implemnt latency WA (rev2)
URL : https://patchwork.freedesktop.org/series/46481/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4551 -> Patchwork_9782 =

== Summary - SUCCESS ==

No regressions found.

External URL: https://patchwork.freedesktop.org/api/1.0/series/46481/revisions/2/mbox/

== Known issues ==

Here are the changes found in Patchwork_9782 that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@drv_selftest@live_coherency:
      fi-gdg-551:         PASS -> DMESG-FAIL (fdo#107164)

    igt@drv_selftest@live_hangcheck:
      fi-skl-guc:         PASS -> DMESG-FAIL (fdo#107174)

    igt@gem_exec_suspend@basic-s4-devices:
      fi-skl-6600u:       PASS -> INCOMPLETE (fdo#104108)

    
    ==== Possible fixes ====

    igt@drv_selftest@live_hangcheck:
      fi-kbl-7560u:       DMESG-FAIL (fdo#106560, fdo#106947) -> PASS

    igt@drv_selftest@live_workarounds:
      fi-skl-6700hq:      DMESG-FAIL (fdo#107292) -> PASS

    igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
      {fi-cfl-8109u}:     INCOMPLETE (fdo#106070) -> PASS

    
    ==== Warnings ====

    igt@drv_selftest@live_hangcheck:
      fi-cnl-psr:         DMESG-WARN -> DMESG-FAIL (fdo#106560)

    {igt@kms_psr@primary_page_flip}:
      fi-cnl-psr:         DMESG-WARN (fdo#107372) -> DMESG-FAIL (fdo#107372)

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

fdo#104108 https://bugs.freedesktop.org/show_bug.cgi?id=104108
fdo#106070 https://bugs.freedesktop.org/show_bug.cgi?id=106070
fdo#106560 https://bugs.freedesktop.org/show_bug.cgi?id=106560
fdo#106947 https://bugs.freedesktop.org/show_bug.cgi?id=106947
fdo#107164 https://bugs.freedesktop.org/show_bug.cgi?id=107164
fdo#107174 https://bugs.freedesktop.org/show_bug.cgi?id=107174
fdo#107292 https://bugs.freedesktop.org/show_bug.cgi?id=107292
fdo#107372 https://bugs.freedesktop.org/show_bug.cgi?id=107372

== Participating hosts (50 -> 44) ==

Missing (6): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper

== Build changes ==

* Linux: CI_DRM_4551 -> Patchwork_9782

CI_DRM_4551: 68157d5c225b33a8f480ceb2ea11d2fae680fe65 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4576: bcb37a9b20eeec97f15fac2222408cc2e0b77631 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9782: 517bcc78eb3b93372e1998eddcbf9138b8dc4a40 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

517bcc78eb3b drm/i915/skl+: don't trust IPC value set by BIOS 035e7e872a52 drm/i915/kbl+: Enable IPC only for symmetric memory configurations 39a7f7e0e151 drm/i915: Implement 16GB dimm wa for latency level-0 8a96d4539cf7 drm/i915/skl+: Decode memory bandwidth and parameters 2d380e0fb91b drm/i915/bxt: Decode memory bandwidth and parameters

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9782/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#25 lore raw

✓ Fi.CI.IGT: success for Decode memdev info and bandwidth and implemnt latency WA (rev2)

In reply to Mahesh Kumar
== Series Details ==

== Series Details ==

Series: Decode memdev info and bandwidth and implemnt latency WA (rev2)
URL : https://patchwork.freedesktop.org/series/46481/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4551_full -> Patchwork_9782_full =

== Summary - WARNING ==

Minor unknown changes coming with Patchwork_9782_full need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_9782_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

== Possible new issues ==

Here are the unknown changes that may have been introduced in Patchwork_9782_full:

=== IGT changes ===

    ==== Warnings ====

    igt@gem_mocs_settings@mocs-rc6-blt:
      shard-kbl:          PASS -> SKIP

    igt@gem_mocs_settings@mocs-rc6-vebox:
      shard-kbl:          SKIP -> PASS

    igt@kms_vblank@pipe-a-ts-continuation-modeset-hang:
      shard-snb:          PASS -> SKIP

== Known issues ==

Here are the changes found in Patchwork_9782_full that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
      shard-glk:          PASS -> FAIL (fdo#105363)

    igt@kms_flip@2x-wf_vblank-ts-check-interruptible:
      shard-glk:          PASS -> FAIL (fdo#103928)

    igt@kms_plane@plane-panning-bottom-right-suspend-pipe-a-planes:
      shard-apl:          PASS -> FAIL (fdo#103375)

    igt@kms_plane@plane-panning-bottom-right-suspend-pipe-c-planes:
      shard-kbl:          PASS -> INCOMPLETE (fdo#103665)

    
    ==== Possible fixes ====

    igt@gem_softpin@noreloc-s3:
      shard-kbl:          INCOMPLETE (fdo#103665) -> PASS

fdo#103375 https://bugs.freedesktop.org/show_bug.cgi?id=103375
fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fdo#103928 https://bugs.freedesktop.org/show_bug.cgi?id=103928
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363

== Participating hosts (5 -> 5) ==

No changes in participating hosts

== Build changes ==

* Linux: CI_DRM_4551 -> Patchwork_9782

CI_DRM_4551: 68157d5c225b33a8f480ceb2ea11d2fae680fe65 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4576: bcb37a9b20eeec97f15fac2222408cc2e0b77631 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9782: 517bcc78eb3b93372e1998eddcbf9138b8dc4a40 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9782/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx