Skip to contentSkip to conversation

arm: bcm7445: Move config defines to bcm7445.h

PATCH In review Thomas Fitzsimmons 3 participants 3 messages Jul 27, 2018 – Aug 18, 2018

lore
Share & tools
lore

Thomas Fitzsimmons

author
#0 lore raw

PATCH 1/1 arm: bcm7445: Move config defines to bcm7445.h

Move some configuration #defines that do not apply to other bcmstb boards from bcmstb.h to bcm7445.h.

Signed-off-by Thomas Fitzsimmons <[email protected]>
---
 include/configs/bcm7445.h | 18 ++++++++++++++++--
 include/configs/bcmstb.h  | 13 -------------
 2 files changed, 16 insertions(+), 15 deletions(-)
include/configs/bcm7445.h +16 -2
index f720035..4601adf 100644
@@ -10,10 +10,17 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include "bcmstb.h"
-
 #define CONFIG_SYS_NS16550_COM3	0xf040ab00
 
+#define CONFIG_NR_DRAM_BANKS		3
+
+#define CONFIG_SYS_TEXT_BASE		0x80100000
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80200000
+
+#define CONFIG_SYS_MALLOC_LEN		((10 * 1024) << 10) /* 10 MiB */
+
+#include "bcmstb.h"
+
 #define BCMSTB_SDHCI_BASE	0xf03e0200
 #define BCMSTB_TIMER_LOW	0xf0412008
 #define BCMSTB_TIMER_HIGH	0xf041200c

@@ -23,4 +30,11 @@
 #define BCMSTB_HIF_SPI_INTR2	0xf03e1a00
 #define BCMSTB_CS_REG		0xf03e0920
 
+#define CONFIG_ENV_IS_IN_SPI_FLASH	1
+#define CONFIG_DM_SPI			1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF_TEST
+
 #endif	/* __CONFIG_H */
include/configs/bcmstb.h +0 -13
index 262ef54..c74fe40 100644
@@ -87,16 +87,11 @@ extern phys_addr_t prior_stage_fdt_address;
  * MiB.  However, BOLT can be configured to allow loading larger
  * initramfs images, in which case this limitation is eliminated.
  */
-#define CONFIG_NR_DRAM_BANKS		3
-
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_TEXT_BASE		0x80100000
-#define CONFIG_SYS_INIT_RAM_ADDR	0x80200000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x100000
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR +	\
 					 CONFIG_SYS_INIT_RAM_SIZE -	\
 					 GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_MALLOC_LEN		((10 * 1024) << 10) /* 10 MiB */
 #define CONFIG_SYS_LOAD_ADDR		0x2000000
 
 /*

@@ -141,9 +136,6 @@ extern phys_addr_t prior_stage_fdt_address;
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF_TEST
 #define CONFIG_CMD_MMC
 
 /*

@@ -166,7 +158,6 @@ extern phys_addr_t prior_stage_fdt_address;
  */
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 
-#define CONFIG_ENV_IS_IN_SPI_FLASH      1
 #define CONFIG_ENV_OFFSET		0x1e0000
 #define CONFIG_ENV_SIZE			(64 << 10) /* 64 KiB */
 #define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE

@@ -194,8 +185,4 @@ extern phys_addr_t prior_stage_fdt_address;
  */
 #define CONFIG_BOARD_LATE_INIT
 
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-
-#define CONFIG_DM_SPI 1
-
 #endif /* __BCMSTB_H */
Signature · 1 line
1.8.3.1
#1 lore raw
Quoted 4 lines · Thomas Fitzsimmons

Move some configuration #defines that do not apply to other bcmstb boards from bcmstb.h to bcm7445.h.

Signed-off-by Thomas Fitzsimmons <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180813/d1e53765/attachment.sig>