Skip to contentSkip to conversation

Pull request: u-boot-sunxi/master

U-Boot Jagan Teki 4 participants 17 messages Jul 31, 2018 – Aug 5, 2018

lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:

board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)

----------------------------------------------------------------
Icenowy Zheng (14):
sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS
sunxi: add basic memory map definitions of H6 SoC
sunxi: change RMR64's RVBAR address for H6
sunxi: change ATF position for H6
sunxi: add config for SPL at 0x20000 on H6
sunxi: change GIC address on H6
sunxi: add clock code for H6
sunxi: use sun6i-style watchdog for H6
sunxi: add UART0 setup for H6
sunxi: add MMC support for H6
sunxi: add DRAM support to H6
sunxi: add support for Allwinner H6 SoC
sunxi: add support for Pine H64 board
video: sunxi: de2: fix SimpleFB node creation when DE2 not probed

Jagan Teki (5):
phy: sun4i-usb: Call phy_passby even for PHY#0
phy: sun4i-usb: Remove usb_clk_cfg set in probe
phy: sun4i-usb: Update PHY#3 rst_mask only for H3_H5
configs: sunxi: Drop CONFIG_SUNXI_USB_PHYS
board: sun50i: h6: Add OrangePi One Plus initial support

Mylène Josserand (2):
mtd: nand: nand_base: Convert EINVAL into ENOTSUPP
mtd: nand: sunxi: Return on set_feature only when not ENOTSUPP

Simon Baatz (1):
sunxi: enable SATA on Banana Pi M2 Berry

 arch/arm/dts/Makefile                             |   3 +
 arch/arm/dts/sun50i-h6-orangepi-one-plus.dts      | 150 +++++
 arch/arm/dts/sun50i-h6-pine-h64.dts               | 185 ++++++
 arch/arm/dts/sun50i-h6.dtsi                       | 288 +++++++++
 arch/arm/include/asm/arch-sunxi/boot0.h           |   4 +
 arch/arm/include/asm/arch-sunxi/clock.h           |   2 +
 arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h | 320 +++++++++
 arch/arm/include/asm/arch-sunxi/cpu.h             |   2 +
 arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h   |  73 +++
 arch/arm/include/asm/arch-sunxi/dram.h            |   2 +
 arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h  | 297 +++++++++
 arch/arm/include/asm/arch-sunxi/gpio.h            |   1 +
 arch/arm/include/asm/arch-sunxi/mmc.h             |   2 +-
 arch/arm/include/asm/arch-sunxi/spl.h             |   6 +-
 arch/arm/include/asm/arch-sunxi/timer.h           |   2 +-
 arch/arm/mach-sunxi/Kconfig                       |  37 +-
 arch/arm/mach-sunxi/Makefile                      |   2 +
 arch/arm/mach-sunxi/board.c                       |   6 +-
 arch/arm/mach-sunxi/clock_sun50i_h6.c             |  94 +++
 arch/arm/mach-sunxi/cpu_info.c                    |   2 +
 arch/arm/mach-sunxi/dram_sun50i_h6.c              | 755 ++++++++++++++++++++++
 arch/arm/mach-sunxi/rmr_switch.S                  |   6 +
 board/sunxi/MAINTAINERS                           |  10 +
 board/sunxi/board.c                               |   7 +
 board/sunxi/mksunxi_fit_atf.sh                    |  10 +-
 common/spl/Kconfig                                |   2 +-
 configs/bananapi_m2_berry_defconfig               |   3 +
 configs/orangepi_one_plus_defconfig               |  14 +
 configs/pine_h64_defconfig                        |  15 +
 drivers/mmc/sunxi_mmc.c                           |  13 +-
 drivers/mtd/nand/nand_base.c                      |   4 +-
 drivers/mtd/nand/sunxi_nand.c                     |   2 +-
 drivers/phy/allwinner/phy-sun4i-usb.c             |  10 +-
 drivers/video/sunxi/sunxi_de2.c                   |   3 +
 include/configs/sun4i.h                           |   2 -
 include/configs/sun50i.h                          |   7 +-
 include/configs/sun5i.h                           |   2 -
 include/configs/sun6i.h                           |   2 -
 include/configs/sun7i.h                           |   2 -
 include/configs/sun8i.h                           |  10 -
 include/configs/sunxi-common.h                    |  24 +-
 include/dt-bindings/clock/sun50i-h6-ccu.h         | 125 ++++
 include/dt-bindings/clock/sun50i-h6-r-ccu.h       |  24 +
 include/dt-bindings/reset/sun50i-h6-ccu.h         |  73 +++
 include/dt-bindings/reset/sun50i-h6-r-ccu.h       |  17 +
 scripts/config_whitelist.txt                      |   1 -
 46 files changed, 2560 insertions(+), 61 deletions(-)
 create mode 100644 arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
 create mode 100644 arch/arm/dts/sun50i-h6-pine-h64.dts
 create mode 100644 arch/arm/dts/sun50i-h6.dtsi
 create mode 100644 arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
 create mode 100644 arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
 create mode 100644 arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h
 create mode 100644 arch/arm/mach-sunxi/clock_sun50i_h6.c
 create mode 100644 arch/arm/mach-sunxi/dram_sun50i_h6.c
 create mode 100644 configs/orangepi_one_plus_defconfig
 create mode 100644 configs/pine_h64_defconfig
 create mode 100644 include/dt-bindings/clock/sun50i-h6-ccu.h
 create mode 100644 include/dt-bindings/clock/sun50i-h6-r-ccu.h
 create mode 100644 include/dt-bindings/reset/sun50i-h6-ccu.h
 create mode 100644 include/dt-bindings/reset/sun50i-h6-r-ccu.h
#1 lore raw
Quoted 11 lines · Jagan Teki

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

Quoted 8 lines

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:

board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's changes to save some space on aarch64 will get it to fit in, and I need to see if I'm ready to apply them.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180801/4ee7be20/attachment.sig>
author
#2 lore raw
Quoted 19 lines · Tom Rini
Quoted 17 lines · Jagan Teki

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 7 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's changes to save some space on aarch64 will get it to fit in, and I need to see if I'm ready to apply them.

I though of inform the same, but for h6 atf need to use it from mainline here all a64 boards seems failing. I didn't reproduce this manually.

+WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional

#3 lore raw
Quoted 28 lines · Jagan Teki
Quoted 19 lines · Tom Rini
Quoted 17 lines · Jagan Teki

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 7 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's changes to save some space on aarch64 will get it to fit in, and I need to see if I'm ready to apply them.

Quoted 5 lines

I though of inform the same, but for h6 atf need to use it from mainline here all a64 boards seems failing. I didn't reproduce this manually.

+WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional

The cause is obvious. The ATF blob is missing from the environment. If TravisCI is only used to test building, maybe we could just put an empty bl31.bin there to make it happy.

ChenYu

#4 lore raw
Quoted 33 lines · Chen-Yu Tsai
Quoted 32 lines · Jagan Teki
Quoted 19 lines · Tom Rini
Quoted 17 lines · Jagan Teki

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 7 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's changes to save some space on aarch64 will get it to fit in, and I need to see if I'm ready to apply them.

I though of inform the same, but for h6 atf need to use it from mainline here all a64 boards seems failing. I didn't reproduce this manually.

Quoted 5 lines
Quoted 1 line

+WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional

The cause is obvious. The ATF blob is missing from the environment. If TravisCI is only used to test building, maybe we could just put an empty bl31.bin there to make it happy.

Please note that the above is NOT the problem. That's the non-fatal warning that your resulting binary won't work as there's no bl31.bin.
The problem is:
+aarch64-linux-ld.bfd: u-boot-spl section .u_boot_list' will not fit in region .sram' +aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180801/edd3a39d/attachment.sig>
#5 lore raw
Quoted 43 lines · Tom Rini
Quoted 33 lines · Chen-Yu Tsai
Quoted 32 lines · Jagan Teki
Quoted 19 lines · Tom Rini
Quoted 17 lines · Jagan Teki

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 7 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's changes to save some space on aarch64 will get it to fit in, and I need to see if I'm ready to apply them.

I though of inform the same, but for h6 atf need to use it from mainline here all a64 boards seems failing. I didn't reproduce this manually.

Quoted 5 lines
Quoted 1 line

+WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional

The cause is obvious. The ATF blob is missing from the environment. If TravisCI is only used to test building, maybe we could just put an empty bl31.bin there to make it happy.

Please note that the above is NOT the problem. That's the non-fatal warning that your resulting binary won't work as there's no bl31.bin. The problem is:

Review

Quoted 5 lines
(quoted diff) +5 -0
+aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
+aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2

Yeah I noticed. Just pointing out if we want to get rid of the ATF noise.

Thanks

#6 lore raw
Quoted 41 lines · Chen-Yu Tsai
Quoted 40 lines · Tom Rini
Quoted 38 lines · Chen-Yu Tsai
Quoted 28 lines · Jagan Teki
Quoted 19 lines · Tom Rini
Quoted 17 lines · Jagan Teki

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 7 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's changes to save some space on aarch64 will get it to fit in, and I need to see if I'm ready to apply them.

Quoted 5 lines

I though of inform the same, but for h6 atf need to use it from mainline here all a64 boards seems failing. I didn't reproduce this manually.

+WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional

The cause is obvious. The ATF blob is missing from the environment. If TravisCI is only used to test building, maybe we could just put an empty bl31.bin there to make it happy.

Quoted 10 lines

Review

Quoted 8 lines

Please note that the above is NOT the problem. That's the non-fatal warning that your resulting binary won't work as there's no bl31.bin. The problem is:

(quoted diff) +5 -0
+aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
+aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2

Yeah I noticed. Just pointing out if we want to get rid of the ATF noise.

Ah, no. The noise is very intentional so that it's clear to humans that what they made won't boot.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180801/33d1c477/attachment.sig>
author
#7 lore raw
In reply to Tom Rini
Quoted 43 lines · Tom Rini
Quoted 33 lines · Chen-Yu Tsai
Quoted 32 lines · Jagan Teki
Quoted 19 lines · Tom Rini
Quoted 17 lines · Jagan Teki

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 7 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's changes to save some space on aarch64 will get it to fit in, and I need to see if I'm ready to apply them.

I though of inform the same, but for h6 atf need to use it from mainline here all a64 boards seems failing. I didn't reproduce this manually.

Quoted 5 lines
Quoted 1 line

+WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional

The cause is obvious. The ATF blob is missing from the environment. If TravisCI is only used to test building, maybe we could just put an empty bl31.bin there to make it happy.

Please note that the above is NOT the problem. That's the non-fatal warning that your resulting binary won't work as there's no bl31.bin. The problem is:

Review

Quoted 5 lines
(quoted diff) +5 -0
+aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
+aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2

ie what, I'm able to built manually pine_h64 with gcc-6.3.1

#8 lore raw
Quoted 41 lines · Jagan Teki
Quoted 40 lines · Tom Rini
Quoted 38 lines · Chen-Yu Tsai
Quoted 28 lines · Jagan Teki
Quoted 19 lines · Tom Rini
Quoted 17 lines · Jagan Teki

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 7 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's changes to save some space on aarch64 will get it to fit in, and I need to see if I'm ready to apply them.

Quoted 5 lines

I though of inform the same, but for h6 atf need to use it from mainline here all a64 boards seems failing. I didn't reproduce this manually.

+WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional

The cause is obvious. The ATF blob is missing from the environment. If TravisCI is only used to test building, maybe we could just put an empty bl31.bin there to make it happy.

Quoted 10 lines

Review

Quoted 8 lines

Please note that the above is NOT the problem. That's the non-fatal warning that your resulting binary won't work as there's no bl31.bin. The problem is:

(quoted diff) +5 -0
+aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
+aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2

ie what, I'm able to built manually pine_h64 with gcc-6.3.1

Travis-CI uses gcc-7.3 from kernel.org.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180802/ff0441b8/attachment.sig>
author
#9 lore raw
Quoted 53 lines · Tom Rini
Quoted 41 lines · Jagan Teki
Quoted 40 lines · Tom Rini
Quoted 38 lines · Chen-Yu Tsai
Quoted 28 lines · Jagan Teki
Quoted 19 lines · Tom Rini
Quoted 17 lines · Jagan Teki

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 7 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's changes to save some space on aarch64 will get it to fit in, and I need to see if I'm ready to apply them.

Quoted 5 lines

I though of inform the same, but for h6 atf need to use it from mainline here all a64 boards seems failing. I didn't reproduce this manually.

+WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional

The cause is obvious. The ATF blob is missing from the environment. If TravisCI is only used to test building, maybe we could just put an empty bl31.bin there to make it happy.

Quoted 10 lines

Review

Quoted 8 lines

Please note that the above is NOT the problem. That's the non-fatal warning that your resulting binary won't work as there's no bl31.bin. The problem is:

(quoted diff) +5 -0
+aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
+aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2

ie what, I'm able to built manually pine_h64 with gcc-6.3.1

Quoted 1 line

Travis-CI uses gcc-7.3 from kernel.org.

Look like we have size issues wrt gcc versions, Icenowy tried glibc variant, 2018.07-3 bleeding edge and it work it seems. can't we upgrade Travis-CI to use the same or if not specific for h6?

#10 lore raw

于 2018年8月5日 GMT+08:00 上午1:48:43, Jagan Teki <[email protected]> 写到:

Quoted 68 lines · Tom Rini
Quoted 4 lines · Jagan Teki
Quoted 3 lines · Tom Rini
Quoted 2 lines · Chen-Yu Tsai
Quoted 1 line

On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki

Quoted 1 line · <[email protected]> wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <[email protected]>

Quoted 10 lines · wrote:
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines · Jagan Teki
Quoted 9 lines

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit

5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to

89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support

(2018-07-31 20:50:01 +0530)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 1 line

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet

Andre's

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

changes to save some space on aarch64 will get it to fit in,

and I need

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 1 line

to see if I'm ready to apply them.

I though of inform the same, but for h6 atf need to use it from mainline here all a64 boards seems failing. I didn't reproduce

this

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

manually.

+WARNING: BL31 file bl31.bin NOT found, resulting binary is

non-functional

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The cause is obvious. The ATF blob is missing from the

environment.

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

If TravisCI is only used to test building, maybe we could just

put an

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line

empty bl31.bin there to make it happy.

Please note that the above is NOT the problem. That's the

non-fatal

Quoted 1 line
Quoted 1 line
Quoted 1 line

warning that your resulting binary won't work as there's no

bl31.bin.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The problem is:
+aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not

fit in region `.sram'

Quoted 7 lines
Quoted 6 lines

Review

Quoted 4 lines
(quoted diff) +4 -0
+aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2

ie what, I'm able to built manually pine_h64 with gcc-6.3.1

Quoted 5 lines
Quoted 1 line

Travis-CI uses gcc-7.3 from kernel.org.

Look like we have size issues wrt gcc versions, Icenowy tried glibc variant, 2018.07-3 bleeding edge and it work it seems. can't we upgrade Travis-CI to use the same or if not specific for h6?

I have a commit from Vasily that can reduce ~100B of SPL.

It can be applied to workaround this, but I don't want to use it so early.

#11 lore raw
In reply to Jagan Teki

于 2018年8月5日 GMT+08:00 上午1:48:43, Jagan Teki <[email protected]> 写到:

Quoted 68 lines · Tom Rini
Quoted 4 lines · Jagan Teki
Quoted 3 lines · Tom Rini
Quoted 2 lines · Chen-Yu Tsai
Quoted 1 line

On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki

Quoted 1 line · <[email protected]> wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <[email protected]>

Quoted 10 lines · wrote:
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines · Jagan Teki
Quoted 9 lines

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit

5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to

89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support

(2018-07-31 20:50:01 +0530)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 1 line

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet

Andre's

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

changes to save some space on aarch64 will get it to fit in,

and I need

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 1 line

to see if I'm ready to apply them.

I though of inform the same, but for h6 atf need to use it from mainline here all a64 boards seems failing. I didn't reproduce

this

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

manually.

+WARNING: BL31 file bl31.bin NOT found, resulting binary is

non-functional

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The cause is obvious. The ATF blob is missing from the

environment.

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

If TravisCI is only used to test building, maybe we could just

put an

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line

empty bl31.bin there to make it happy.

Please note that the above is NOT the problem. That's the

non-fatal

Quoted 1 line
Quoted 1 line
Quoted 1 line

warning that your resulting binary won't work as there's no

bl31.bin.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The problem is:
+aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not

fit in region `.sram'

Quoted 7 lines
Quoted 6 lines

Review

Quoted 4 lines
(quoted diff) +4 -0
+aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2

ie what, I'm able to built manually pine_h64 with gcc-6.3.1

Quoted 5 lines
Quoted 1 line

Travis-CI uses gcc-7.3 from kernel.org.

Look like we have size issues wrt gcc versions, Icenowy tried glibc variant, 2018.07-3 bleeding edge and it work it seems. can't we upgrade Travis-CI to use the same or if not specific for h6?

I will soon push a patch that disables Pine A64 plus/non-plus detection code on non-A64 SoCs (clearly these code doesn't apply to H5/H6, as there's no Pine A64/Pine A64+ with H5/H6 :-) )

#12 lore raw
In reply to Jagan Teki
Quoted 54 lines · Jagan Teki
Quoted 53 lines · Tom Rini
Quoted 51 lines · Jagan Teki
Quoted 43 lines · Tom Rini
Quoted 33 lines · Chen-Yu Tsai
Quoted 32 lines · Jagan Teki
Quoted 19 lines · Tom Rini
Quoted 17 lines · Jagan Teki

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 7 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's changes to save some space on aarch64 will get it to fit in, and I need to see if I'm ready to apply them.

I though of inform the same, but for h6 atf need to use it from mainline here all a64 boards seems failing. I didn't reproduce this manually.

Quoted 5 lines
Quoted 1 line

+WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional

The cause is obvious. The ATF blob is missing from the environment. If TravisCI is only used to test building, maybe we could just put an empty bl31.bin there to make it happy.

Please note that the above is NOT the problem. That's the non-fatal warning that your resulting binary won't work as there's no bl31.bin. The problem is:

Review

Quoted 5 lines
(quoted diff) +5 -0
+aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
+aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2

ie what, I'm able to built manually pine_h64 with gcc-6.3.1

Quoted 5 lines
Quoted 1 line

Travis-CI uses gcc-7.3 from kernel.org.

Look like we have size issues wrt gcc versions, Icenowy tried glibc variant, 2018.07-3 bleeding edge and it work it seems. can't we upgrade Travis-CI to use the same or if not specific for h6?

I'm testing Andre's series currently and that should resolve this problem. But no, Travis-CI is using the toolchains that buildman fetches and those are the must-work toolchains. It's the kernel.org ones that Arnd sets up and are as vendor-neutral as we're going to get.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180804/62b3670f/attachment.sig>
#13 lore raw

于 2018年8月5日 GMT+08:00 上午2:51:43, Tom Rini <[email protected]> 写到:

Quoted 71 lines · Jagan Teki
Quoted 3 lines · Tom Rini
Quoted 2 lines · Jagan Teki
Quoted 1 line

On Wed, Aug 1, 2018 at 6:25 PM, Tom Rini <[email protected]>

Quoted 2 lines · wrote:
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines · Chen-Yu Tsai
Quoted 1 line

On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki

Quoted 1 line · <[email protected]> wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <[email protected]>

Quoted 10 lines · wrote:
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines · Jagan Teki
Quoted 9 lines

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit

5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to

89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support

(2018-07-31 20:50:01 +0530)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 1 line

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet

Andre's

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

changes to save some space on aarch64 will get it to fit in,

and I need

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line

to see if I'm ready to apply them.

I though of inform the same, but for h6 atf need to use it

from

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

mainline here all a64 boards seems failing. I didn't

reproduce this

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

manually.

+WARNING: BL31 file bl31.bin NOT found, resulting binary is

non-functional

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The cause is obvious. The ATF blob is missing from the

environment.

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

If TravisCI is only used to test building, maybe we could just

put an

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line

empty bl31.bin there to make it happy.

Please note that the above is NOT the problem. That's the

non-fatal

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

warning that your resulting binary won't work as there's no

bl31.bin.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The problem is:
+aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will

not fit in region `.sram'

Quoted 7 lines
Quoted 7 lines
Quoted 6 lines

Review

Quoted 4 lines
(quoted diff) +4 -0
+aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2

ie what, I'm able to built manually pine_h64 with gcc-6.3.1

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

Travis-CI uses gcc-7.3 from kernel.org.

Look like we have size issues wrt gcc versions, Icenowy tried glibc variant, 2018.07-3 bleeding edge and it work it seems. can't we upgrade Travis-CI to use the same or if not specific for h6?

I'm testing Andre's series currently and that should resolve this

BTW where's this series?

Quoted 3 lines

problem. But no, Travis-CI is using the toolchains that buildman fetches and those are the must-work toolchains. It's the kernel.org ones that Arnd sets up and are as vendor-neutral as we're going to get.

#14 lore raw
In reply to Tom Rini

于 2018年8月5日 GMT+08:00 上午2:51:43, Tom Rini <[email protected]> 写到:

Quoted 71 lines · Jagan Teki
Quoted 3 lines · Tom Rini
Quoted 2 lines · Jagan Teki
Quoted 1 line

On Wed, Aug 1, 2018 at 6:25 PM, Tom Rini <[email protected]>

Quoted 2 lines · wrote:
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines · Chen-Yu Tsai
Quoted 1 line

On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki

Quoted 1 line · <[email protected]> wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <[email protected]>

Quoted 10 lines · wrote:
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines · Jagan Teki
Quoted 9 lines

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit

5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to

89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support

(2018-07-31 20:50:01 +0530)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 1 line

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet

Andre's

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

changes to save some space on aarch64 will get it to fit in,

and I need

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line

to see if I'm ready to apply them.

I though of inform the same, but for h6 atf need to use it

from

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

mainline here all a64 boards seems failing. I didn't

reproduce this

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

manually.

+WARNING: BL31 file bl31.bin NOT found, resulting binary is

non-functional

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The cause is obvious. The ATF blob is missing from the

environment.

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

If TravisCI is only used to test building, maybe we could just

put an

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line

empty bl31.bin there to make it happy.

Please note that the above is NOT the problem. That's the

non-fatal

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

warning that your resulting binary won't work as there's no

bl31.bin.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The problem is:
+aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will

not fit in region `.sram'

Quoted 7 lines
Quoted 7 lines
Quoted 6 lines

Review

Quoted 4 lines
(quoted diff) +4 -0
+aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2

ie what, I'm able to built manually pine_h64 with gcc-6.3.1

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

Travis-CI uses gcc-7.3 from kernel.org.

Look like we have size issues wrt gcc versions, Icenowy tried glibc variant, 2018.07-3 bleeding edge and it work it seems. can't we upgrade Travis-CI to use the same or if not specific for h6?

I'm testing Andre's series currently and that should resolve this

Do you mention the exception handling series?

BTW I made a patch to save ~200B, purely in sunxi codepath, simple, easier to review, and may solve the problem more quickly.

I have sent the patch, it's named "sunxi: disable Pine A64 model detection code on non-A64 SoCs".

Quoted 3 lines

problem. But no, Travis-CI is using the toolchains that buildman fetches and those are the must-work toolchains. It's the kernel.org ones that Arnd sets up and are as vendor-neutral as we're going to get.

#15 lore raw
Quoted 76 lines · Icenowy Zheng

于 2018年8月5日 GMT+08:00 上午2:51:43, Tom Rini <[email protected]> 写到:

Quoted 73 lines · Jagan Teki
Quoted 3 lines · Tom Rini
Quoted 2 lines · Jagan Teki
Quoted 1 line

On Wed, Aug 1, 2018 at 6:25 PM, Tom Rini <[email protected]>

Quoted 2 lines · wrote:
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines · Chen-Yu Tsai
Quoted 1 line

On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki

Quoted 1 line · <[email protected]> wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <[email protected]>

Quoted 10 lines · wrote:
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines · Jagan Teki
Quoted 9 lines

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit

5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to

89a897fc4d78e31332e5899e977d8bf3c82abafa:

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

board: sun50i: h6: Add OrangePi One Plus initial support

(2018-07-31 20:50:01 +0530)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 1 line

For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet

Andre's

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

changes to save some space on aarch64 will get it to fit in,

and I need

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line

to see if I'm ready to apply them.

I though of inform the same, but for h6 atf need to use it

from

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

mainline here all a64 boards seems failing. I didn't

reproduce this

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

manually.

+WARNING: BL31 file bl31.bin NOT found, resulting binary is

non-functional

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The cause is obvious. The ATF blob is missing from the

environment.

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

If TravisCI is only used to test building, maybe we could just

put an

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line

empty bl31.bin there to make it happy.

Please note that the above is NOT the problem. That's the

non-fatal

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

warning that your resulting binary won't work as there's no

bl31.bin.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The problem is:
+aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will

not fit in region `.sram'

Quoted 9 lines
Quoted 8 lines
Quoted 6 lines

Review

Quoted 4 lines
(quoted diff) +4 -0
+aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2

ie what, I'm able to built manually pine_h64 with gcc-6.3.1

Travis-CI uses gcc-7.3 from kernel.org.

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

Look like we have size issues wrt gcc versions, Icenowy tried glibc variant, 2018.07-3 bleeding edge and it work it seems. can't we upgrade Travis-CI to use the same or if not specific for h6?

I'm testing Andre's series currently and that should resolve this

Do you mention the exception handling series?

Yes.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180804/cc6446be/attachment.sig>
#16 lore raw
In reply to Jagan Teki
Quoted 11 lines · Jagan Teki

Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:

Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)

Quoted 8 lines

are available in the Git repository at:

git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:

board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180805/cc6152ce/attachment.sig>