ls1012afrwy: Add ls1012afrwy revC board support.
PATCH 1/1 ls1012afrwy: Add ls1012afrwy revC board support.
ls1012afrwy support three revisions of the board. 512MB revA, revB boards and 1GB revC board. revision A and B board are collectively identified as revA/B, however revision C board is identifies as revC.
Signed-off-by Pramod Kumar <[email protected]>
--- board/freescale/ls1012afrdm/ls1012afrdm.c | 20 ++++++++++++-------- include/configs/ls1012afrwy.h | 6 +++--- 2 files changed, 15 insertions(+), 11 deletions(-)
board/freescale/ls1012afrdm/ls1012afrdm.c +12 -8
@@ -24,11 +24,15 @@ DECLARE_GLOBAL_DATA_PTR;static inline int get_board_version (void ) { -struct ccsr_gpio *pgpio = (void *)(GPIO1_BASE_ADDR ); -int val; +uint32_t val; +#ifdef CONFIG_TARGET_LS1012AFRDM + val =0 ; +#else +struct ccsr_gpio *pgpio = (void *)(GPIO2_BASE_ADDR ); - val =in_be32 (&pgpio->gpdat); + val =in_be32 (&pgpio->gpdat) &BOARD_REV_MASK ;/*Get GPIO2 11,12,14*/ +#endif return val; }
@@ -46,11 +50,11 @@ int checkboard(void)puts ("Version" );switch (rev) { -case BOARD_REV_A : -puts (": RevA " ); +case BOARD_REV_A_B : +puts (": RevA/B " );break ; -case BOARD_REV_B : -puts (": RevB " ); +case BOARD_REV_C : +puts (": RevC " );break ;default :puts (": unknown" );
@@ -100,7 +104,7 @@ int dram_init(void)#ifdef CONFIG_TARGET_LS1012AFRWY board_rev =get_board_version (); -if (board_rev &BOARD_REV_B ) { +if (board_rev ==BOARD_REV_C ) { mparam.mdctl =0x05180000 ; gd->ram_size =SYS_SDRAM_SIZE_1024 ; }else {
include/configs/ls1012afrwy.h +3 -3
@@ -9,9 +9,9 @@#include "ls1012a_common.h" /* Board Rev*/ -#define BOARD_REV_A 0x0 -#define BOARD_REV_B 0x200 - +#define BOARD_REV_A_B 0x0 +#define BOARD_REV_C 0x00080000 +#define BOARD_REV_MASK 0x001A0000/* DDR */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1#define CONFIG_CHIP_SELECTS_PER_CTRL 1
Signature · 1 line
2.17.1
York Sun
AppliedPATCH 1/1 ls1012afrwy: Add ls1012afrwy revC board support.
Quoted 7 lines · Pramod Kumar
ls1012afrwy support three revisions of the board. 512MB revA, revB boards and 1GB revC board. revision A and B board are collectively identified as revA/B, however revision C board is identifies as revC.
Signed-off-by Pramod Kumar <[email protected]>---
Applied to fsl-qoriq master, awaiting upstream. Thanks.
York