arm64/ptrace: add PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support
Subsystems (2)
PATCH 1/1 arm64/ptrace: add PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support
Add PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on ARM64. This copies the x86 semantics for invoking ptrace hooks, and have been verified on ARM64 machine.
--- arch/arm64/include/asm/thread_info.h | 5 ++++- arch/arm64/include/uapi/asm/ptrace.h | 2 ++ arch/arm64/kernel/ptrace.c | 17 +++++++++++++++++ 3 files changed, 23 insertions(+), 1 deletion(-)
arch/arm64/include/asm/thread_info.h +4 -1
@@ -75,6 +75,7 @@ struct thread_info {* TIF_SYSCALL_TRACE - syscall trace active * TIF_SYSCALL_TRACEPOINT - syscall tracepoint for ftrace * TIF_SYSCALL_AUDIT - syscall auditing +* TIF_SYSCALL_EMU - syscall emulation active * TIF_SECOMP - syscall secure computing * TIF_SIGPENDING - signal pending * TIF_NEED_RESCHED - rescheduling necessary
@@ -91,6 +92,7 @@ struct thread_info {#define TIF_SYSCALL_AUDIT 9#define TIF_SYSCALL_TRACEPOINT 10#define TIF_SECCOMP 11 +#define TIF_SYSCALL_EMU 12#define TIF_MEMDIE 18/* is terminating due to OOM killer */ #define TIF_FREEZE 19#define TIF_RESTORE_SIGMASK 20
@@ -106,6 +108,7 @@ struct thread_info {#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)#define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU)#define _TIF_UPROBE (1 << TIF_UPROBE)#define _TIF_32BIT (1 << TIF_32BIT)
@@ -115,7 +118,7 @@ struct thread_info {#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP | \ - _TIF_NOHZ) + _TIF_NOHZ | _TIF_SYSCALL_EMU)#endif /* __KERNEL__ */ #endif /* __ASM_THREAD_INFO_H */
arch/arm64/include/uapi/asm/ptrace.h +2 -0
@@ -23,6 +23,8 @@#include <asm/hwcap.h> +#define PTRACE_SYSEMU 31 +#define PTRACE_SYSEMU_SINGLESTEP 32/* * PSR bits
arch/arm64/kernel/ptrace.c +17 -0
@@ -165,6 +165,9 @@ void ptrace_disable(struct task_struct *child)* is likely to cause regressions on obscure architectures. */ user_disable_single_step (child); +#ifdef TIF_SYSCALL_EMU +clear_tsk_thread_flag (child,TIF_SYSCALL_EMU ); +#endif }#ifdef CONFIG_HAVE_HW_BREAKPOINT
@@ -1351,6 +1354,11 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs)if (test_thread_flag (TIF_SYSCALL_TRACE ))tracehook_report_syscall (regs,PTRACE_SYSCALL_ENTER ); +if (test_thread_flag (TIF_SYSCALL_EMU )) { +tracehook_report_syscall (regs,PTRACE_SYSCALL_ENTER ); +return -1 ; + } +/* Do the secure computing after ptrace; failures should be fast. */ if (secure_computing (NULL ) ==-1 )return -1 ;
@@ -1373,6 +1381,15 @@ asmlinkage void syscall_trace_exit(struct pt_regs *regs)if (test_thread_flag (TIF_SYSCALL_TRACE ))tracehook_report_syscall (regs,PTRACE_SYSCALL_EXIT ); + +/* +* We only get here because of TIF_SINGLESTEP, +* for PTRACE_SYSEMU_SINGLESTEP, we already reported +* the syscall instruction in syscall_trace_enter(). +*/ +if (test_thread_flag (TIF_SINGLESTEP ) && + !test_thread_flag (TIF_SYSCALL_EMU )) +tracehook_report_syscall_exit (regs,1 ); }/*
--
2.7.4
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Quoted 11 lines · Haibo.Xu
Add
PTRACE_SYSEMUandPTRACE_SYSEMU_SINGLESTEPsupport on ARM64. This copies the x86 semantics for invoking ptrace hooks, and have been verified on ARM64 machine.Signed-off-by Haibo.Xu <[email protected]>Signed-off-by Bin.Lu <[email protected]>--- arch/arm64/include/asm/thread_info.h | 5 ++++- arch/arm64/include/uapi/asm/ptrace.h | 2 ++ arch/arm64/kernel/ptrace.c | 17 +++++++++++++++++ 3 files changed, 23 insertions(+), 1 deletion(-)
What is PTRACE_SYSEMU and what is its semantics? Why isn't it done in the core ptrace code?
Quoted 65 lines
arch/arm64/include/asm/thread_info.h +4
-1@@ -75,6 +75,7 @@ struct thread_info {* TIF_SYSCALL_TRACE - syscall trace active * TIF_SYSCALL_TRACEPOINT - syscall tracepoint for ftrace * TIF_SYSCALL_AUDIT - syscall auditing +* TIF_SYSCALL_EMU - syscall emulation active * TIF_SECOMP - syscall secure computing * TIF_SIGPENDING - signal pending * TIF_NEED_RESCHED - rescheduling necessary @@ -91,6 +92,7 @@ struct thread_info {#define TIF_SYSCALL_AUDIT 9#define TIF_SYSCALL_TRACEPOINT 10#define TIF_SECCOMP 11 +#define TIF_SYSCALL_EMU 12#define TIF_MEMDIE 18/* is terminating due to OOM killer */ #define TIF_FREEZE 19#define TIF_RESTORE_SIGMASK 20@@ -106,6 +108,7 @@ struct thread_info {#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)#define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU)#define _TIF_UPROBE (1 << TIF_UPROBE)#define _TIF_32BIT (1 << TIF_32BIT)@@ -115,7 +118,7 @@ struct thread_info {#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP | \ - _TIF_NOHZ) + _TIF_NOHZ | _TIF_SYSCALL_EMU)#endif /* __KERNEL__ */ #endif /* __ASM_THREAD_INFO_H */ arch/arm64/include/uapi/asm/ptrace.h +2
-0@@ -23,6 +23,8 @@#include <asm/hwcap.h> +#define PTRACE_SYSEMU 31 +#define PTRACE_SYSEMU_SINGLESTEP 32/* * PSR bits arch/arm64/kernel/ptrace.c +3
-0@@ -165,6 +165,9 @@ void ptrace_disable(struct task_struct *child)* is likely to cause regressions on obscure architectures. */ user_disable_single_step (child); +#ifdef TIF_SYSCALL_EMU +clear_tsk_thread_flag (child,TIF_SYSCALL_EMU ); +#endif }#ifdef CONFIG_HAVE_HW_BREAKPOINT
arch/arm64/kernel/ptrace.c asmlinkage int syscall_trace_enter(struct pt_regs *regs) · line 1360
Quoted 7 lines
arch/arm64/kernel/ptrace.c +4
-0@@ -1351,6 +1354,11 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs)if (test_thread_flag (TIF_SYSCALL_TRACE ))tracehook_report_syscall (regs,PTRACE_SYSCALL_ENTER ); +if (test_thread_flag (TIF_SYSCALL_EMU )) { +tracehook_report_syscall (regs,PTRACE_SYSCALL_ENTER ); +return -1 ; + }
This looks weird -- are TIF_SYSCALL_EMU and TIF_SYSCALL_TRACE mutually exclusive, or is it harmless to report this twice? Why do we return early and skip the seccomp checks?
Will
Quoted 23 lines
arch/arm64/kernel/ptrace.c +10
-0+/* Do the secure computing after ptrace; failures should be fast. */ if (secure_computing (NULL ) ==-1 )return -1 ;@@ -1373,6 +1381,15 @@ asmlinkage void syscall_trace_exit(struct pt_regs *regs)if (test_thread_flag (TIF_SYSCALL_TRACE ))tracehook_report_syscall (regs,PTRACE_SYSCALL_EXIT ); + +/* +* We only get here because of TIF_SINGLESTEP, +* for PTRACE_SYSEMU_SINGLESTEP, we already reported +* the syscall instruction in syscall_trace_enter(). +*/ +if (test_thread_flag (TIF_SINGLESTEP ) && + !test_thread_flag (TIF_SYSCALL_EMU )) +tracehook_report_syscall_exit (regs,1 ); }/* Signature · 1 line
2.7.4
Am Montag, 3. September 2018, 18:31:03 CEST schrieb Will Deacon:
Quoted 13 lines · Haibo.Xu
Quoted 11 lines
Add
PTRACE_SYSEMUandPTRACE_SYSEMU_SINGLESTEPsupport on ARM64. This copies the x86 semantics for invoking ptrace hooks, and have been verified on ARM64 machine.Signed-off-by Haibo.Xu <[email protected]>Signed-off-by Bin.Lu <[email protected]>--- arch/arm64/include/asm/thread_info.h | 5 ++++- arch/arm64/include/uapi/asm/ptrace.h | 2 ++ arch/arm64/kernel/ptrace.c | 17 +++++++++++++++++ 3 files changed, 23 insertions(+), 1 deletion(-)
Quoted 2 lines
What is
PTRACE_SYSEMUand what is its semantics? Why isn't it done in the core ptrace code?
It is an optimization added for UserModeLinux many years ago. PTRACE_SYSEMU basically allows you to handle system calls in user space without the kernel seeing them.
Before that UML had to render every system call into a no-op, e.h. getpid(). This was complicated and slow.
The ptrace() manpage has a section on PTRACE_SYSEMU, more documentation on the semantics is not available.
And yes, I think this should also done in the core. Like many other ptrace() areas this needs a cleanup. ;-)
I wonder what Haibo Xu want to do with PTRACE_SYSEMU on arm64. Are you porting UML or gvisor to arm64?
Thanks,
//richard
Hi Richard,
Quoted 14 lines · Richard Weinberger
Am Montag, 3. September 2018, 18:31:03 CEST schrieb Will Deacon:
Quoted 13 lines · Haibo.Xu
Quoted 11 lines
Add
PTRACE_SYSEMUandPTRACE_SYSEMU_SINGLESTEPsupport on ARM64. This copies the x86 semantics for invoking ptrace hooks, and have been verified on ARM64 machine.Signed-off-by Haibo.Xu <[email protected]>Signed-off-by Bin.Lu <[email protected]>--- arch/arm64/include/asm/thread_info.h | 5 ++++- arch/arm64/include/uapi/asm/ptrace.h | 2 ++ arch/arm64/kernel/ptrace.c | 17 +++++++++++++++++ 3 files changed, 23 insertions(+), 1 deletion(-)
Quoted 8 lines
Quoted 2 lines
What is
PTRACE_SYSEMUand what is its semantics? Why isn't it done in the core ptrace code?It is an optimization added for UserModeLinux many years ago.
PTRACE_SYSEMUbasically allows you to handle system calls in user space without the kernel seeing them.
Before that UML had to render every system call into a no-op,e.h.getpid(). This was complicated and slow.
Ok, thanks for the insight!
Quoted 2 lines
The
ptrace()manpage has a section onPTRACE_SYSEMU, more documentation on the semantics is not available.
:( We already have tracehook, seccomp, tracepoint and audit fighting with each other on syscall entry, so I'm really not keen to add another player to the game unless we really have to.
Has anybody tried implementing this using tracehook?
Quoted 5 lines
And yes, I think this should also done in the core. Like many other
ptrace()areas this needs a cleanup. ;-)I wonder what Haibo Xu want to do with
PTRACE_SYSEMUon arm64. Are you porting UML or gvisor to arm64?
That's a good question. Haibo?
Will
Hi Will,
Quoted 18 lines · Richard Weinberger
Quoted 17 lines
Am Montag, 3. September 2018, 18:31:03 CEST schrieb Will Deacon:
Quoted 15 lines · Haibo.Xu
Quoted 11 lines
Add
PTRACE_SYSEMUandPTRACE_SYSEMU_SINGLESTEPsupport on ARM64. This copies the x86 semantics for invoking ptrace hooks, and have been verified on ARM64 machine.Signed-off-by Haibo.Xu <[email protected]>Signed-off-by Bin.Lu <[email protected]>--- arch/arm64/include/asm/thread_info.h | 5 ++++- arch/arm64/include/uapi/asm/ptrace.h | 2 ++ arch/arm64/kernel/ptrace.c | 17 +++++++++++++++++ 3 files changed, 23 insertions(+), 1 deletion(-)What is
PTRACE_SYSEMUand what is its semantics? Why isn't it done in the core ptrace code?
Quoted 8 lines
Quoted 5 lines
It is an optimization added for UserModeLinux many years ago.
PTRACE_SYSEMUbasically allows you to handle system calls in user space without the kernel seeing them.
Before that UML had to render every system call into a no-op,e.h.getpid(). This was complicated and slow.Ok, thanks for the insight!
Thanks for Richard's comments!
Quoted 7 lines
Quoted 2 lines
The
ptrace()manpage has a section onPTRACE_SYSEMU, more documentation on the semantics is not available.:( We already have tracehook, seccomp, tracepoint and audit fighting with each other on syscall entry, so I'm really not keen to add another player to the game unless we really have to.
Has anybody tried implementing this using tracehook?
Currently, it seems nobody has tried it.
Quoted 3 lines
Quoted 3 lines
And yes, I think this should also done in the core. Like many other
ptrace()areas this needs a cleanup. ;-)
Hi Richard,
What do you mean by done it in the core? moving macro definition to include/uapi/linux/ptrace.h? The patch is strictly follow x86's sematic on PTRACE_SYSEMU/SINGLESTEP support.
Quoted 4 lines
Quoted 2 lines
I wonder what Haibo Xu want to do with
PTRACE_SYSEMUon arm64. Are you porting UML or gvisor to arm64?That's a good question. Haibo?
The story is we are working on a container runtime(Google Gvisor) support on ARM64 platform, and the Gvisor depend on Linux kernel PTRACE_SYSEMU/SINGLESTEP support.
Haibo
-----????-----
???: Will Deacon <[email protected]>
????: 2018?9?4? 0:57
???: Richard Weinberger <[email protected]>
??: Haibo Xu (Arm Technology China) <[email protected]>; Catalin Marinas <[email protected]>; linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; nd <[email protected]>; jdike at addtoit.com ??: Re: [PATCH] arm64/ptrace: add PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support
Hi Richard,
Quoted 14 lines · Richard Weinberger
Am Montag, 3. September 2018, 18:31:03 CEST schrieb Will Deacon:
Quoted 13 lines · Haibo.Xu
Quoted 11 lines
Add
PTRACE_SYSEMUandPTRACE_SYSEMU_SINGLESTEPsupport on ARM64. This copies the x86 semantics for invoking ptrace hooks, and have been verified on ARM64 machine.Signed-off-by Haibo.Xu <[email protected]>Signed-off-by Bin.Lu <[email protected]>--- arch/arm64/include/asm/thread_info.h | 5 ++++- arch/arm64/include/uapi/asm/ptrace.h | 2 ++ arch/arm64/kernel/ptrace.c | 17 +++++++++++++++++ 3 files changed, 23 insertions(+), 1 deletion(-)
Quoted 8 lines
Quoted 2 lines
What is
PTRACE_SYSEMUand what is its semantics? Why isn't it done in the core ptrace code?It is an optimization added for UserModeLinux many years ago.
PTRACE_SYSEMUbasically allows you to handle system calls in user space without the kernel seeing them.
Before that UML had to render every system call into a no-op,e.h.getpid(). This was complicated and slow.
Ok, thanks for the insight!
Quoted 2 lines
The
ptrace()manpage has a section onPTRACE_SYSEMU, more documentation on the semantics is not available.
:( We already have tracehook, seccomp, tracepoint and audit fighting with each other on syscall entry, so I'm really not keen to add another player to the game unless we really have to.
Has anybody tried implementing this using tracehook?
Quoted 5 lines
And yes, I think this should also done in the core. Like many other
ptrace()areas this needs a cleanup. ;-)I wonder what Haibo Xu want to do with
PTRACE_SYSEMUon arm64. Are you porting UML or gvisor to arm64?
That's a good question. Haibo?
Will
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Am Dienstag, 4. September 2018, 04:11:07 CEST schrieb Haibo Xu (Arm Technology China):
Quoted 4 lines
Hi Richard,
What do you mean by done it in the core? moving macro definition to
include/uapi/linux/ptrace.h? The patch is strictly follow x86's sematic on PTRACE_SYSEMU/SINGLESTEP support.
Well, the feature itself is not really architecture specific.
Just because x86 does it in arch/x86, it does not mean that this is the best way. I guess this is also what Will tried to say.
If we can, we should implement PTRACE_SYSEMU in the core ptrace code and not per architecture.
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
I wonder what Haibo Xu want to do with
PTRACE_SYSEMUon arm64. Are you porting UML or gvisor to arm64?That's a good question. Haibo?
The story is we are working on a container runtime(Google Gvisor) support on ARM64 platform, and the Gvisor depend on Linux kernel PTRACE_SYSEMU/SINGLESTEP support.
Gvisor also supports a kvm backend which should be *much* faster than PTRACE_SYSEMU. Otherwise gvisor suffers from the same performance drawbacks as UML does. Pagefaults via SIGSEGV/mmap, syscall gate via ptrace().
Did you check, is PTRACE_SYSEMU really the way to go for gvisor? Last time I checked the KVM backend looked promising but still WIP, though.
I also wonder whether PTRACE_SYSEMU is really the only missing bit to support gvisor on arm64. Did you check how to work around VIPT/VIVT caching issues? UML (and gvisor in this context) have lots of implicit x86 dependencies.
Thanks,
//richard
Quoted 11 lines · Richard Weinberger
Am Dienstag, 4. September 2018, 04:11:07 CEST schrieb Haibo Xu (Arm Technology China):
Quoted 4 lines
Hi Richard,
What do you mean by done it in the core? moving macro definition to
include/uapi/linux/ptrace.h? The patch is strictly follow x86's sematic on PTRACE_SYSEMU/SINGLESTEP support.Well, the feature itself is not really architecture specific.
Just because x86 does it inarch/x86, it does not mean that this is the best way. I guess this is also what Will tried to say.
If we can, we should implementPTRACE_SYSEMUin the core ptrace code and not per architecture.
Yes, the feature is common on x86/ARM64, and there are many duplicated codes on both architecture specific ptrace codes. But to unify these codes may take more time, we need to re-evaluate the workload.
Quoted 8 lines
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
I wonder what Haibo Xu want to do with
PTRACE_SYSEMUon arm64. Are you porting UML or gvisor to arm64?That's a good question. Haibo?
The story is we are working on a container runtime(Google Gvisor)
support on ARM64 platform, and the Gvisor depend on Linux kernel PTRACE_SYSEMU/SINGLESTEP support.
Quoted 7 lines
Gvisor also supports a kvm backend which should be *much* faster than
PTRACE_SYSEMU. Otherwise gvisor suffers from the same performance drawbacks as UML does. Pagefaults via SIGSEGV/mmap, syscall gate viaptrace().Did you check, is
PTRACE_SYSEMUreally the way to go for gvisor? Last time I checked the KVM backend looked promising but still WIP, though.
Gvisor do support two platforms, ptrace and kvm. To support ptrace platform on ARM64 is our first step.
Quoted 4 lines
From the long run, KVM would be a better choice, and we will work on it after ptrace platform get worked.
I also wonder whether
PTRACE_SYSEMUis really the only missing bit to support gvisor on arm64. Did you check how to work around VIPT/VIVT caching issues? UML (and gvisor in this context) have lots of implicit x86 dependencies.
As far as we know, PTRACE_SYSEMU is the only missing bit that needed in Linux kernel to support Gvisor on ARM64. For the VIPT/VIVT caching issues, we haven't look into it. Could you help share more info about the issue?
Thanks,
Haibo
-----????-----
???: Richard Weinberger <[email protected]>
????: 2018?9?5? 3:45
???: Haibo Xu (Arm Technology China) <[email protected]>
??: Will Deacon <[email protected]>; Catalin Marinas <[email protected]>; linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; nd <[email protected]>; jdike at addtoit.com ??: Re: ??: [PATCH] arm64/ptrace: add PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support
Am Dienstag, 4. September 2018, 04:11:07 CEST schrieb Haibo Xu (Arm Technology China):
Quoted 4 lines
Hi Richard,
What do you mean by done it in the core? moving macro definition to
include/uapi/linux/ptrace.h? The patch is strictly follow x86's sematic on PTRACE_SYSEMU/SINGLESTEP support.
Well, the feature itself is not really architecture specific.
Just because x86 does it in arch/x86, it does not mean that this is the best way. I guess this is also what Will tried to say.
If we can, we should implement PTRACE_SYSEMU in the core ptrace code and not per architecture.
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
I wonder what Haibo Xu want to do with
PTRACE_SYSEMUon arm64. Are you porting UML or gvisor to arm64?That's a good question. Haibo?
The story is we are working on a container runtime(Google Gvisor)
support on ARM64 platform, and the Gvisor depend on Linux kernel PTRACE_SYSEMU/SINGLESTEP support.
Gvisor also supports a kvm backend which should be *much* faster than PTRACE_SYSEMU. Otherwise gvisor suffers from the same performance drawbacks as UML does. Pagefaults via SIGSEGV/mmap, syscall gate via ptrace().
Did you check, is PTRACE_SYSEMU really the way to go for gvisor? Last time I checked the KVM backend looked promising but still WIP, though.
I also wonder whether PTRACE_SYSEMU is really the only missing bit to support gvisor on arm64. Did you check how to work around VIPT/VIVT caching issues? UML (and gvisor in this context) have lots of implicit x86 dependencies.
Thanks,
//richard
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Quoted 11 lines · Richard Weinberger
Am Dienstag, 4. September 2018, 04:11:07 CEST schrieb Haibo Xu (Arm Technology China):
Quoted 4 lines
Hi Richard,
What do you mean by done it in the core? moving macro definition to
include/uapi/linux/ptrace.h? The patch is strictly follow x86's sematic on PTRACE_SYSEMU/SINGLESTEP support.Well, the feature itself is not really architecture specific.
Just because x86 does it inarch/x86, it does not mean that this is the best way. I guess this is also what Will tried to say.
If we can, we should implementPTRACE_SYSEMUin the core ptrace code and not per architecture.
After re-evaluating the workload to unify the PTRACE_SYSEMU in the core ptrace code on both ARM and x86 architecture, We think we are not able to work on it recently(we only have 1.5 person work on the Gvisor project).
Quoted 8 lines
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
I wonder what Haibo Xu want to do with
PTRACE_SYSEMUon arm64. Are you porting UML or gvisor to arm64?That's a good question. Haibo?
The story is we are working on a container runtime(Google Gvisor)
support on ARM64 platform, and the Gvisor depend on Linux kernel PTRACE_SYSEMU/SINGLESTEP support.
Quoted 7 lines
Gvisor also supports a kvm backend which should be *much* faster than
PTRACE_SYSEMU. Otherwise gvisor suffers from the same performance drawbacks as UML does. Pagefaults via SIGSEGV/mmap, syscall gate viaptrace().Did you check, is
PTRACE_SYSEMUreally the way to go for gvisor? Last time I checked the KVM backend looked promising but still WIP, though.
Gvisor do support two platforms, ptrace and kvm. To support ptrace platform on ARM64 is our first step.
Quoted 1 line
From the long run, KVM would be a better choice, and we will work on it after ptrace platform get worked.
Currently, our initial patches for Gvisor ARM64 support are ready for the small "hello-world" container (please refer to the attachment for the test logs), and we are in the process of upstreaming the code. Could you help merge this patch to the Linux kernel for the time being? We can reschedule the resource to unify the overall Ptrace codes in the kernel late.
Quoted 2 lines
I also wonder whether
PTRACE_SYSEMUis really the only missing bit to support gvisor on arm64. Did you check how to work around VIPT/VIVT caching issues? UML (and gvisor in this context) have lots of implicit x86 dependencies.
As far as we know, PTRACE_SYSEMU is the only missing bit that needed in Linux kernel to support Gvisor ptrace platform on ARM64.
Thanks,
Haibo
-----????-----
???: Richard Weinberger <[email protected]>
????: 2018?9?5? 3:45
???: Haibo Xu (Arm Technology China) <[email protected]>
??: Will Deacon <[email protected]>; Catalin Marinas <[email protected]>; linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; nd <[email protected]>; jdike at addtoit.com ??: Re: ??: [PATCH] arm64/ptrace: add PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support
Am Dienstag, 4. September 2018, 04:11:07 CEST schrieb Haibo Xu (Arm Technology China):
Quoted 4 lines
Hi Richard,
What do you mean by done it in the core? moving macro definition to
include/uapi/linux/ptrace.h? The patch is strictly follow x86's sematic on PTRACE_SYSEMU/SINGLESTEP support.
Well, the feature itself is not really architecture specific.
Just because x86 does it in arch/x86, it does not mean that this is the best way. I guess this is also what Will tried to say.
If we can, we should implement PTRACE_SYSEMU in the core ptrace code and not per architecture.
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
I wonder what Haibo Xu want to do with
PTRACE_SYSEMUon arm64. Are you porting UML or gvisor to arm64?That's a good question. Haibo?
The story is we are working on a container runtime(Google Gvisor)
support on ARM64 platform, and the Gvisor depend on Linux kernel PTRACE_SYSEMU/SINGLESTEP support.
Gvisor also supports a kvm backend which should be *much* faster than PTRACE_SYSEMU. Otherwise gvisor suffers from the same performance drawbacks as UML does. Pagefaults via SIGSEGV/mmap, syscall gate via ptrace().
Did you check, is PTRACE_SYSEMU really the way to go for gvisor? Last time I checked the KVM backend looked promising but still WIP, though.
I also wonder whether PTRACE_SYSEMU is really the only missing bit to support gvisor on arm64. Did you check how to work around VIPT/VIVT caching issues? UML (and gvisor in this context) have lots of implicit x86 dependencies.
Thanks,
//richard
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. -------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Gvisor logs.txt
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181016/1484729a/attachment-0001.txt>