batman-adv: Missing list checks for *list_add*
Sven Eckelmann
maintainerv2 cover batman-adv: Missing list checks for *list_add*
Hi,
Marek reviewed the the previous version of the patcheset [0] and requested some changes for patch 1 and 3.
* patch 1:
- added kerneldoc about the locking requirements
* patch 3
- changed batadv_softif_create_vlan to handle problems in batadv_sysfs_add_vlan as fatal error
Kind regards,
Sven
[0] https://patchwork.open-mesh.org/project/b.a.t.m.a.n./list/?series=150&submitter=&state=*&q=&archive=both&delegate=
[1] https://www.open-mesh.org/issues/235
[2] https://www.open-mesh.org/issues/236
[3] https://www.open-mesh.org/issues/237
[4] https://www.open-mesh.org/issues/238
[5] https://www.open-mesh.org/issues/239
[6] https://www.open-mesh.org/issues/240
[7] https://www.open-mesh.org/issues/241
[8] https://patchwork.open-mesh.org/patch/4919/
net/batman-adv/gateway_client.c | 11 +++++++++-- net/batman-adv/network-coding.c | 27 +++++++++++++++------------ net/batman-adv/soft-interface.c | 25 ++++++++++++++++++------- net/batman-adv/translation-table.c | 6 ++++-- net/batman-adv/tvlv.c | 8 ++++++-- 5 files changed, 52 insertions(+), 25 deletions(-)
Signature · 1 line
2.11.0
Sven Eckelmann
maintainerPATCH v2 1/5 batman-adv: Prevent duplicated gateway_node entry
The function batadv_gw_node_add is responsible for adding new gw_node to the gateway_list. It is expecting that the caller already checked that there is not already an entry with the same key or not.
But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation.
The check and the manipulation of the list must therefore be in the same locked code section.
---
v2:
* added kerneldoc about the locking requirements
net/batman-adv/gateway_client.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
net/batman-adv/gateway_client.c +9 -2
@@ -32,6 +32,7 @@#include <linux/kernel.h> #include <linux/kref.h> #include <linux/list.h> +#include <linux/lockdep.h> #include <linux/netdevice.h> #include <linux/netlink.h> #include <linux/rculist.h>
@@ -348,6 +349,9 @@ void batadv_gw_check_election(struct batadv_priv *bat_priv,* @bat_priv: the bat priv with all the soft interface information * @orig_node: originator announcing gateway capabilities * @gateway: announced bandwidth information +* +* Has to be called with the appropriate locks being acquired +* (gw.list_lock). */ static void batadv_gw_node_add(struct batadv_priv *bat_priv, struct batadv_orig_node *orig_node,
@@ -355,6 +359,8 @@ static void batadv_gw_node_add(struct batadv_priv *bat_priv, {struct batadv_gw_node *gw_node; +lockdep_assert_held (&bat_priv->gw.list_lock); +if (gateway->bandwidth_down ==0 )return ;
@@ -369,10 +375,8 @@ static void batadv_gw_node_add(struct batadv_priv *bat_priv, gw_node->bandwidth_down =ntohl (gateway->bandwidth_down); gw_node->bandwidth_up =ntohl (gateway->bandwidth_up); -spin_lock_bh (&bat_priv->gw.list_lock);kref_get (&gw_node->refcount);hlist_add_head_rcu (&gw_node->list, &bat_priv->gw.gateway_list); -spin_unlock_bh (&bat_priv->gw.list_lock); batadv_dbg(BATADV_DBG_BATMAN, bat_priv, "Found new gateway %pM -> gw bandwidth: %u.%u/%u.%u MBit\n",
@@ -428,11 +432,14 @@ void batadv_gw_node_update(struct batadv_priv *bat_priv, {struct batadv_gw_node *gw_node, *curr_gw =NULL ; +spin_lock_bh (&bat_priv->gw.list_lock); gw_node =batadv_gw_node_get (bat_priv, orig_node);if (!gw_node) {batadv_gw_node_add (bat_priv, orig_node, gateway); +spin_unlock_bh (&bat_priv->gw.list_lock); goto out; } +spin_unlock_bh (&bat_priv->gw.list_lock);if (gw_node->bandwidth_down ==ntohl (gateway->bandwidth_down) && gw_node->bandwidth_up ==ntohl (gateway->bandwidth_up))
Signature · 1 line
2.11.0
Sven Eckelmann
maintainerPATCH v2 2/5 batman-adv: Prevent duplicated nc_node entry
In reply to Sven EckelmannThe function batadv_nc_get_nc_node is responsible for adding new nc_nodes to the in_coding_list and out_coding_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted.
But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation.
The check and the manipulation of the list must therefore be in the same locked code section.
--- net/batman-adv/network-coding.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-)
net/batman-adv/network-coding.c +15 -12
@@ -854,16 +854,27 @@ batadv_nc_get_nc_node(struct batadv_priv *bat_priv,spinlock_t *lock;/* Used to lock list selected by "int in_coding" */ struct list_head *list; +/* Select ingoing or outgoing coding node */ +if (in_coding) { + lock = &orig_neigh_node->in_coding_list_lock; + list = &orig_neigh_node->in_coding_list; + }else { + lock = &orig_neigh_node->out_coding_list_lock; + list = &orig_neigh_node->out_coding_list; + } + +spin_lock_bh (lock); +/* Check if nc_node is already added */ nc_node =batadv_nc_find_nc_node (orig_node, orig_neigh_node, in_coding);/* Node found */ if (nc_node) -return nc_node; + goto unlock; nc_node =kzalloc (sizeof (*nc_node),GFP_ATOMIC );if (!nc_node) -return NULL ; + goto unlock;/* Initialize nc_node */ INIT_LIST_HEAD (&nc_node->list);
@@ -872,22 +883,14 @@ batadv_nc_get_nc_node(struct batadv_priv *bat_priv,kref_get (&orig_neigh_node->refcount); nc_node->orig_node = orig_neigh_node; -/* Select ingoing or outgoing coding node */ -if (in_coding) { - lock = &orig_neigh_node->in_coding_list_lock; - list = &orig_neigh_node->in_coding_list; - }else { - lock = &orig_neigh_node->out_coding_list_lock; - list = &orig_neigh_node->out_coding_list; - } -batadv_dbg (BATADV_DBG_NC , bat_priv,"Adding nc_node %pM -> %pM\n" , nc_node->addr, nc_node->orig_node->orig);/* Add nc_node to orig_node */ -spin_lock_bh (lock);kref_get (&nc_node->refcount);list_add_tail_rcu (&nc_node->list, list); + +unlock:spin_unlock_bh (lock);return nc_node;
Signature · 1 line
2.11.0
Sven Eckelmann
maintainerPATCH v2 3/5 batman-adv: Prevent duplicated softif_vlan entry
In reply to Sven EckelmannThe function batadv_softif_vlan_get is responsible for adding new softif_vlan to the softif_vlan_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted.
But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation.
The check and the manipulation of the list must therefore be in the same locked code section.
---
v2:
* changed batadv_softif_create_vlan to handle problems in batadv_sysfs_add_vlan as fatal error
net/batman-adv/soft-interface.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-)
net/batman-adv/soft-interface.c +18 -7
@@ -574,15 +574,20 @@ int batadv_softif_create_vlan(struct batadv_priv *bat_priv, unsigned short vid)struct batadv_softif_vlan *vlan;int err; +spin_lock_bh (&bat_priv->softif_vlan_list_lock); + vlan =batadv_softif_vlan_get (bat_priv, vid);if (vlan) {batadv_softif_vlan_put (vlan); +spin_unlock_bh (&bat_priv->softif_vlan_list_lock);return -EEXIST ; } vlan =kzalloc (sizeof (*vlan),GFP_ATOMIC ); -if (!vlan) +if (!vlan) { +spin_unlock_bh (&bat_priv->softif_vlan_list_lock);return -ENOMEM ; + } vlan->bat_priv = bat_priv; vlan->vid = vid;
@@ -590,17 +595,23 @@ int batadv_softif_create_vlan(struct batadv_priv *bat_priv, unsigned short vid)atomic_set (&vlan->ap_isolation,0 ); +kref_get (&vlan->refcount); +hlist_add_head_rcu (&vlan->list, &bat_priv->softif_vlan_list); +spin_unlock_bh (&bat_priv->softif_vlan_list_lock); + +/* batadv_sysfs_add_vlan cannot be in the spinlock section due to the +* sleeping behavior of the sysfs functions and the fs_reclaim lock +*/ err =batadv_sysfs_add_vlan (bat_priv->soft_iface, vlan);if (err) { -kfree (vlan); +/* ref for the function */ +batadv_softif_vlan_put (vlan); + +/* ref for the list */ +batadv_softif_vlan_put (vlan);return err; } -spin_lock_bh (&bat_priv->softif_vlan_list_lock); -kref_get (&vlan->refcount); -hlist_add_head_rcu (&vlan->list, &bat_priv->softif_vlan_list); -spin_unlock_bh (&bat_priv->softif_vlan_list_lock); -/* add a new TT local entry. This one will be marked with the NOPURGE * flag */
Signature · 1 line
2.11.0
Sven Eckelmann
maintainerPATCH v2 4/5 batman-adv: Prevent duplicated global TT entry
In reply to Sven EckelmannThe function batadv_tt_global_orig_entry_add is responsible for adding new tt_orig_list_entry to the orig_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted.
But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation.
The check and the manipulation of the list must therefore be in the same locked code section.
--- net/batman-adv/translation-table.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
net/batman-adv/translation-table.c +4 -2
@@ -1613,6 +1613,8 @@ batadv_tt_global_orig_entry_add(struct batadv_tt_global_entry *tt_global, {struct batadv_tt_orig_list_entry *orig_entry; +spin_lock_bh (&tt_global->list_lock); + orig_entry =batadv_tt_global_orig_entry_find (tt_global, orig_node);if (orig_entry) {/* refresh the ttvn: the current value could be a bogus one that
@@ -1635,11 +1637,9 @@ batadv_tt_global_orig_entry_add(struct batadv_tt_global_entry *tt_global, orig_entry->flags = flags;kref_init (&orig_entry->refcount); -spin_lock_bh (&tt_global->list_lock);kref_get (&orig_entry->refcount);hlist_add_head_rcu (&orig_entry->list, &tt_global->orig_list); -spin_unlock_bh (&tt_global->list_lock);atomic_inc (&tt_global->orig_list_count); sync_flags:
@@ -1647,6 +1647,8 @@ batadv_tt_global_orig_entry_add(struct batadv_tt_global_entry *tt_global, out:if (orig_entry)batadv_tt_orig_list_entry_put (orig_entry); + +spin_unlock_bh (&tt_global->list_lock); }/**
Signature · 1 line
2.11.0
Sven Eckelmann
maintainerPATCH v2 5/5 batman-adv: Prevent duplicated tvlv handler
In reply to Sven EckelmannThe function batadv_tvlv_handler_register is responsible for adding new tvlv_handler to the handler_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted.
But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation.
The check and the manipulation of the list must therefore be in the same locked code section.
--- net/batman-adv/tvlv.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
net/batman-adv/tvlv.c +6 -2
@@ -529,15 +529,20 @@ void batadv_tvlv_handler_register(struct batadv_priv *bat_priv, {struct batadv_tvlv_handler *tvlv_handler; +spin_lock_bh (&bat_priv->tvlv.handler_list_lock); + tvlv_handler =batadv_tvlv_handler_get (bat_priv, type, version);if (tvlv_handler) { +spin_unlock_bh (&bat_priv->tvlv.handler_list_lock);batadv_tvlv_handler_put (tvlv_handler);return ; } tvlv_handler =kzalloc (sizeof (*tvlv_handler),GFP_ATOMIC ); -if (!tvlv_handler) +if (!tvlv_handler) { +spin_unlock_bh (&bat_priv->tvlv.handler_list_lock);return ; + } tvlv_handler->ogm_handler = optr; tvlv_handler->unicast_handler = uptr;
@@ -547,7 +552,6 @@ void batadv_tvlv_handler_register(struct batadv_priv *bat_priv,kref_init (&tvlv_handler->refcount);INIT_HLIST_NODE (&tvlv_handler->list); -spin_lock_bh (&bat_priv->tvlv.handler_list_lock);kref_get (&tvlv_handler->refcount);hlist_add_head_rcu (&tvlv_handler->list, &bat_priv->tvlv.handler_list);spin_unlock_bh (&bat_priv->tvlv.handler_list_lock);
Signature · 1 line
2.11.0
Sven Eckelmann
maintainerQuoted 4 lines · On Donnerstag, 6. September 2018 14:35:23 CEST Sven Eckelmann wrote:
Hi,
Marek reviewed the the previous version of the patcheset [0] and requested some changes for patch 1 and 3.
[...]
Added as 848be9859b01..acabad79e017 [1,2,3,4,5]
Kind regards,
Sven
[1] https://git.open-mesh.org/batman-adv.git/commit/69b3ca714eba608fe79a51ccd89ce7050ee0b770
[2] https://git.open-mesh.org/batman-adv.git/commit/bab8447ad1850b25188f9652c0c52f8e58acd656
[3] https://git.open-mesh.org/batman-adv.git/commit/023d3f64207e8b6a6e6d0718d98e239c5545ef0c
[4] https://git.open-mesh.org/batman-adv.git/commit/79097255a1a3e1bd1949be309af941181fbc7b36
[5] https://git.open-mesh.org/batman-adv.git/commit/acabad79e01740525cf4ff8ce6e9a210b683d420