Skip to contentSkip to conversation

remoteproc: qcom: Rename adsp and mss drivers

PATCH In review Bjorn Andersson 2 participants 5 messages Sep 24, 2018 – Sep 26, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v3 cover remoteproc: qcom: Rename adsp and mss drivers

As we're introducing a non-TZ based remoteproc driver for the ADSP in SDM845 the current naming scheme becomes cumbersome. Rename the existing drivers in order to allow for the following:

qcom_q6v5_adsp - handle the non-TZ adsp subsystem qcom_q6v5_mss - handles the self-authenticated modem qcom_q6v5_pas - handles all TZ based "standard" subsystems qcom_q6v5_wcss - handles the non-TZ wireless subsystem

Bjorn Andersson (2):
remoteproc: qcom: Rename Hexagon v5 PAS driver
remoteproc: qcom: Rename Hexagon v5 modem driver

 drivers/remoteproc/Kconfig                    | 35 ++++++++++---------
 drivers/remoteproc/Makefile                   |  4 +--
 .../{qcom_q6v5_pil.c => qcom_q6v5_mss.c}      |  6 ++--
 .../{qcom_adsp_pil.c => qcom_q6v5_pas.c}      |  4 +--
 4 files changed, 25 insertions(+), 24 deletions(-)
 rename drivers/remoteproc/{qcom_q6v5_pil.c => qcom_q6v5_mss.c} (99%)
 rename drivers/remoteproc/{qcom_adsp_pil.c => qcom_q6v5_pas.c} (98%)
Signature · 1 line
2.18.0
#1 lore raw

PATCH v3 1/2 remoteproc: qcom: Rename Hexagon v5 PAS driver

The Hexagon v5 ADSP driver is used for more than only the ADSP and there's an upcoming non-PAS ADSP PIL for SDM845, so rename the driver to qcom_q6v5_pas in order to better suite this.

---

Changes since v2:
- Move the rename of qcom_q6v5_pil to the 2nd patch, where it belongs.

 drivers/remoteproc/Kconfig                    | 27 ++++++++++---------
 drivers/remoteproc/Makefile                   |  2 +-
 .../{qcom_adsp_pil.c => qcom_q6v5_pas.c}      |  4 +--
 3 files changed, 17 insertions(+), 16 deletions(-)
 rename drivers/remoteproc/{qcom_adsp_pil.c => qcom_q6v5_pas.c} (98%)
drivers/remoteproc/Kconfig +14 -13
index 052d4dd347f9..425e502c6471 100644
@@ -84,8 +84,16 @@ config KEYSTONE_REMOTEPROC
 	  It's safe to say N here if you're not interested in the Keystone
 	  DSPs or just want to use a bare minimum kernel.
 
-config QCOM_ADSP_PIL
-	tristate "Qualcomm ADSP Peripheral Image Loader"
+config QCOM_RPROC_COMMON
+	tristate
+
+config QCOM_Q6V5_COMMON
+	tristate
+	depends on ARCH_QCOM
+	depends on QCOM_SMEM
+
+config QCOM_Q6V5_PAS
+	tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
 	depends on OF && ARCH_QCOM
 	depends on QCOM_SMEM
 	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
@@ -98,15 +106,7 @@ config QCOM_ADSP_PIL
 	select QCOM_SCM
 	help
 	  Say y here to support the TrustZone based Peripherial Image Loader
-	  for the Qualcomm ADSP remote processors.
-
-config QCOM_RPROC_COMMON
-	tristate
-
-config QCOM_Q6V5_COMMON
-	tristate
-	depends on ARCH_QCOM
-	depends on QCOM_SMEM
+	  for the Qualcomm Hexagon v5 based remote processors.
 
 config QCOM_Q6V5_PIL
 	tristate "Qualcomm Hexagon V5 Peripherial Image Loader"
@@ -120,8 +120,9 @@ config QCOM_Q6V5_PIL
 	select QCOM_RPROC_COMMON
 	select QCOM_SCM
 	help
-	  Say y here to support the Qualcomm Peripherial Image Loader for the
-	  Hexagon V5 based remote processors.
+	  Say y here to support the TrustZone based Peripherial Image Loader
+	  for the Qualcomm Hexagon v5 based remote processors. This is commonly
+	  used to control subsystems such as ADSP, Compute and Sensor.
 
 config QCOM_Q6V5_WCSS
 	tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
drivers/remoteproc/Makefile +1 -1
index 03332fa7e2ee..eb86c8ba5a87 100644
@@ -14,9 +14,9 @@ obj-$(CONFIG_OMAP_REMOTEPROC)		+= omap_remoteproc.o
 obj-$(CONFIG_WKUP_M3_RPROC)		+= wkup_m3_rproc.o
 obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
 obj-$(CONFIG_KEYSTONE_REMOTEPROC)	+= keystone_remoteproc.o
-obj-$(CONFIG_QCOM_ADSP_PIL)		+= qcom_adsp_pil.o
 obj-$(CONFIG_QCOM_RPROC_COMMON)		+= qcom_common.o
 obj-$(CONFIG_QCOM_Q6V5_COMMON)		+= qcom_q6v5.o
+obj-$(CONFIG_QCOM_Q6V5_PAS)		+= qcom_q6v5_pas.o
 obj-$(CONFIG_QCOM_Q6V5_PIL)		+= qcom_q6v5_pil.o
 obj-$(CONFIG_QCOM_Q6V5_WCSS)		+= qcom_q6v5_wcss.o
 obj-$(CONFIG_QCOM_SYSMON)		+= qcom_sysmon.o
drivers/remoteproc/qcom_q6v5_pas.c renamed from drivers/remoteproc/qcom_adsp_pil.c +2 -2
similarity index 98%
rename from drivers/remoteproc/qcom_adsp_pil.c
rename to drivers/remoteproc/qcom_q6v5_pas.c
index d4339a6da616..2478ef3cd519 100644
@@ -364,11 +364,11 @@ static struct platform_driver adsp_driver = {
 	.probe = adsp_probe,
 	.remove = adsp_remove,
 	.driver = {
-		.name = "qcom_adsp_pil",
+		.name = "qcom_q6v5_pas",
 		.of_match_table = adsp_of_match,
 	},
 };
 
 module_platform_driver(adsp_driver);
-MODULE_DESCRIPTION("Qualcomm MSM8974/MSM8996 ADSP Peripherial Image Loader");
+MODULE_DESCRIPTION("Qualcomm Hexagon v5 Peripheral Authentication Service driver");
 MODULE_LICENSE("GPL v2");
Signature · 1 line
2.18.0
Reviewed-by on v3 1/2
#2 lore raw

Re: [PATCH v3 1/2] remoteproc: qcom: Rename Hexagon v5 PAS driver

Quoted 8 lines · Bjorn Andersson

The Hexagon v5 ADSP driver is used for more than only the ADSP and there's an upcoming non-PAS ADSP PIL for SDM845, so rename the driver to qcom_q6v5_pas in order to better suite this.

---

Quoted 9 lines

Changes since v2:
- Move the rename of qcom_q6v5_pil to the 2nd patch, where it belongs.

 drivers/remoteproc/Kconfig                    | 27 ++++++++++---------
 drivers/remoteproc/Makefile                   |  2 +-
 .../{qcom_adsp_pil.c => qcom_q6v5_pas.c}      |  4 +--
 3 files changed, 17 insertions(+), 16 deletions(-)
 rename drivers/remoteproc/{qcom_adsp_pil.c => qcom_q6v5_pas.c} (98%)
#3 lore raw

PATCH v3 2/2 remoteproc: qcom: Rename Hexagon v5 modem driver

In reply to Bjorn Andersson

The qcom_q6v5_pil implements support for the self-authenticating modem subsystem. With the introduction of other q6v5 based non-TZ based remoteproc driver the current name is cause for confusion, so rename it to be more specific.

No functional change.

---

Chances since v2:
- Updated module description, driver name and header comment

 drivers/remoteproc/Kconfig                         | 14 +++++++-------
 drivers/remoteproc/Makefile                        |  2 +-
 .../{qcom_q6v5_pil.c => qcom_q6v5_mss.c}           |  6 +++---
 3 files changed, 11 insertions(+), 11 deletions(-)
 rename drivers/remoteproc/{qcom_q6v5_pil.c => qcom_q6v5_mss.c} (99%)
drivers/remoteproc/Kconfig +7 -7
index 425e502c6471..8894935583e2 100644
@@ -92,30 +92,30 @@ config QCOM_Q6V5_COMMON
 	depends on ARCH_QCOM
 	depends on QCOM_SMEM
 
-config QCOM_Q6V5_PAS
-	tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
+config QCOM_Q6V5_MSS
+	tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support"
 	depends on OF && ARCH_QCOM
 	depends on QCOM_SMEM
 	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 	depends on QCOM_SYSMON || QCOM_SYSMON=n
 	select MFD_SYSCON
-	select QCOM_MDT_LOADER
 	select QCOM_Q6V5_COMMON
 	select QCOM_RPROC_COMMON
 	select QCOM_SCM
 	help
-	  Say y here to support the TrustZone based Peripherial Image Loader
-	  for the Qualcomm Hexagon v5 based remote processors.
+	  Say y here to support the Qualcomm self-authenticating modem
+	  subsystem based on Hexagon V5.
 
-config QCOM_Q6V5_PIL
-	tristate "Qualcomm Hexagon V5 Peripherial Image Loader"
+config QCOM_Q6V5_PAS
+	tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
 	depends on OF && ARCH_QCOM
 	depends on QCOM_SMEM
 	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 	depends on QCOM_SYSMON || QCOM_SYSMON=n
 	select MFD_SYSCON
+	select QCOM_MDT_LOADER
 	select QCOM_Q6V5_COMMON
 	select QCOM_RPROC_COMMON
 	select QCOM_SCM
drivers/remoteproc/Makefile +1 -1
index eb86c8ba5a87..050f41ac93b0 100644
@@ -16,8 +16,8 @@ obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
 obj-$(CONFIG_KEYSTONE_REMOTEPROC)	+= keystone_remoteproc.o
 obj-$(CONFIG_QCOM_RPROC_COMMON)		+= qcom_common.o
 obj-$(CONFIG_QCOM_Q6V5_COMMON)		+= qcom_q6v5.o
+obj-$(CONFIG_QCOM_Q6V5_MSS)		+= qcom_q6v5_mss.o
 obj-$(CONFIG_QCOM_Q6V5_PAS)		+= qcom_q6v5_pas.o
-obj-$(CONFIG_QCOM_Q6V5_PIL)		+= qcom_q6v5_pil.o
 obj-$(CONFIG_QCOM_Q6V5_WCSS)		+= qcom_q6v5_wcss.o
 obj-$(CONFIG_QCOM_SYSMON)		+= qcom_sysmon.o
 obj-$(CONFIG_QCOM_WCNSS_PIL)		+= qcom_wcnss_pil.o
drivers/remoteproc/qcom_q6v5_mss.c renamed from drivers/remoteproc/qcom_q6v5_pil.c +3 -3
similarity index 99%
rename from drivers/remoteproc/qcom_q6v5_pil.c
rename to drivers/remoteproc/qcom_q6v5_mss.c
index d7a4b9eca5d2..9ebbb9339295 100644
@@ -1,5 +1,5 @@
 /*
- * Qualcomm Peripheral Image Loader
+ * Qualcomm self-authenticating modem subsystem remoteproc driver
  *
  * Copyright (C) 2016 Linaro Ltd.
  * Copyright (C) 2014 Sony Mobile Communications AB
@@ -1368,11 +1368,11 @@ static struct platform_driver q6v5_driver = {
 	.probe = q6v5_probe,
 	.remove = q6v5_remove,
 	.driver = {
-		.name = "qcom-q6v5-pil",
+		.name = "qcom-q6v5-mss",
 		.of_match_table = q6v5_of_match,
 	},
 };
 module_platform_driver(q6v5_driver);
 
-MODULE_DESCRIPTION("Peripheral Image Loader for Hexagon");
+MODULE_DESCRIPTION("Qualcomm Self-authenticating modem remoteproc driver");
 MODULE_LICENSE("GPL v2");
Signature · 1 line
2.18.0
Reviewed-by on v3 2/2
#4 lore raw

Re: [PATCH v3 2/2] remoteproc: qcom: Rename Hexagon v5 modem driver

Quoted 10 lines · Bjorn Andersson

The qcom_q6v5_pil implements support for the self-authenticating modem subsystem. With the introduction of other q6v5 based non-TZ based remoteproc driver the current name is cause for confusion, so rename it to be more specific.

No functional change.

---

Quoted 9 lines

Chances since v2:
- Updated module description, driver name and header comment

 drivers/remoteproc/Kconfig                         | 14 +++++++-------
 drivers/remoteproc/Makefile                        |  2 +-
 .../{qcom_q6v5_pil.c => qcom_q6v5_mss.c}           |  6 +++---
 3 files changed, 11 insertions(+), 11 deletions(-)
 rename drivers/remoteproc/{qcom_q6v5_pil.c => qcom_q6v5_mss.c} (99%)