gpio: mscc-bitbang-spi: Add a simple gpio driver for bitbgang spi

The VCore III SoCs such as the Luton but also the Ocelot can remap an SPI flash directly in memory. However, for writing in the flash the communication has to be done by software.

Each of the signal used for the SPI are exposed in a single register. In order to be able to use the soft-spi driver, the management of this pin is done through this simple gpio driver.

Even if the main purpose of this driver is to be used by soft-spi, it can still be used as a normal gpio driver but with limitation: for example the first pin can't be used as output.

Signed-off-by Gregory CLEMENT <[email protected]>

---
 drivers/gpio/Kconfig                 |   7 ++
 drivers/gpio/Makefile                |   1 +
 drivers/gpio/gpio-mscc-bitbang-spi.c | 126 +++++++++++++++++++++++++++
 3 files changed, 134 insertions(+)
 create mode 100644 drivers/gpio/gpio-mscc-bitbang-spi.c

drivers/gpio/Kconfig +7 -0

index 5cd8b34400..947a59cce3 100644
@@ -99,6 +99,13 @@ config LPC32XX_GPIO
 	help
 	  Support for the LPC32XX GPIO driver.
 
+config MSCC_BITBANG_SPI_GPIO
+	bool "Microsemi bitbang spi GPIO driver"
+	depends on DM_GPIO && SOC_VCOREIII
+	help
+	  Support controlling the GPIO used for SPI bitbang by software. Can
+	  be used by the VCoreIII SoCs, but it was mainly useful for Luton.
+
 config MSM_GPIO
 	bool "Qualcomm GPIO driver"
 	depends on DM_GPIO

drivers/gpio/Makefile +1 -0

index f186120684..2085dd3cba 100644
@@ -58,3 +58,4 @@ obj-$(CONFIG_MVEBU_GPIO)	+= mvebu_gpio.o
 obj-$(CONFIG_MSM_GPIO)		+= msm_gpio.o
 obj-$(CONFIG_$(SPL_)PCF8575_GPIO)	+= pcf8575_gpio.o
 obj-$(CONFIG_PM8916_GPIO)	+= pm8916_gpio.o
+obj-$(CONFIG_MSCC_BITBANG_SPI_GPIO)	+= gpio-mscc-bitbang-spi.o

drivers/gpio/gpio-mscc-bitbang-spi.c new file +16 -0

new file mode 100644
index 0000000000..572107d010
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Microsemi SoCs pinctrl driver
+ *
+ * Author: <[email protected]>
+ * License: Dual MIT/GPL
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <common.h>
+#include <asm-generic/gpio.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <errno.h>
+
+enum {

drivers/gpio/gpio-mscc-bitbang-spi.c new file +52 -0

+	u32	cache_val;
+};
+
+static int mscc_bb_spi_gpio_set(struct udevice *dev, unsigned oft, int val)
+{
+	struct mscc_bb_spi_gpio *gpio = dev_get_priv(dev);
+
+	if (val)
+		gpio->cache_val |= BIT(pinmap[oft]);
+	else
+		gpio->cache_val &= ~BIT(pinmap[oft]);
+
+	writel(gpio->cache_val, gpio->regs);
+
+	return 0;
+}
+
+static int mscc_bb_spi_gpio_direction_output(struct udevice *dev, unsigned oft,
+					   int val)
+{
+	if (oft == 0) {
+		pr_err("SW_SPI_DSI can't be used as output\n");
+		return -ENOTSUPP;
+	}
+
+	mscc_bb_spi_gpio_set(dev, oft, val);
+
+	return 0;
+}
+
+static int mscc_bb_spi_gpio_direction_input(struct udevice *dev, unsigned oft)
+{
+	return 0;
+}
+
+static int mscc_bb_spi_gpio_get(struct udevice *dev, unsigned int oft)
+{
+	struct mscc_bb_spi_gpio *gpio = dev_get_priv(dev);
+	u32 val = readl(gpio->regs);
+
+	return !!(val & BIT(pinmap[oft]));
+}
+
+static const struct dm_gpio_ops mscc_bb_spi_gpio_ops = {
+	.direction_output	= mscc_bb_spi_gpio_direction_output,
+	.direction_input	= mscc_bb_spi_gpio_direction_input,
+	.set_value		= mscc_bb_spi_gpio_set,
+	.get_value		= mscc_bb_spi_gpio_get,
+};
+
+static int mscc_bb_spi_gpio_probe(struct udevice *dev)
+{

drivers/gpio/gpio-mscc-bitbang-spi.c new file +29 -0

+
+	uc_priv->bank_name = dev->name;
+	uc_priv->gpio_count = ARRAY_SIZE(pinmap);
+	/*
+	 * Enable software mode to control the SPI pin, enables the
+	 * output mode for most of the pin and initialize the cache
+	 * value in the same time
+	 */
+
+	gpio->cache_val = SW_PIN_CTRL_MODE | SW_SPI_SCK_OE | SW_SPI_SDO_OE |
+		SW_SPI_CS0_OE;
+	writel(gpio->cache_val, gpio->regs);
+
+	return 0;
+}
+
+static const struct udevice_id mscc_bb_spi_gpio_ids[] = {
+	{ .compatible = "mscc,spi-bitbang-gpio" },
+	{ }
+};
+
+U_BOOT_DRIVER(gpio_mscc_bb_spi) = {
+	.name	= "gpio-mscc-spi-bitbang",
+	.id	= UCLASS_GPIO,
+	.ops	= &mscc_bb_spi_gpio_ops,
+	.probe	= mscc_bb_spi_gpio_probe,
+	.of_match = of_match_ptr(mscc_bb_spi_gpio_ids),
+	.priv_auto_alloc_size = sizeof(struct mscc_bb_spi_gpio),
+};