ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU
Subsystems (2)
Krzysztof Kozlowski
maintainerPATCH v2 1/1 ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU
Add SD card write-protect pin configuration to be sure that it will be properly pulled down to indicate write access.
Signed-off-by Krzysztof Kozlowski <[email protected]>
---
Changes since v1:
1. Remove cd-gpios and wp-gpios leaving only WP pin configuration (after Marek Szyprowski feedback).
2. Pull pin down.
--- arch/arm/boot/dts/exynos5410-odroidxu.dts | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
arch/arm/boot/dts/exynos5410-odroidxu.dts +9 -1
@@ -530,7 +530,7 @@ samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>; bus-width = <4>; cap-sd-highspeed; vmmc-supply = <&ldo21_reg>;
@@ -545,6 +545,14 @@ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; }; + sd2_wp: sd2-wp { + samsung,pins = "gpm5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + /* Pin is floating so be sure to disable write-protect */ + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + pmic_dvs_3: pmic-dvs-3 { samsung,pins = "gpx0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
Signature · 1 line
2.17.1