Skip to contentSkip to conversation

ASoC: rsnd: ssi: Request dedicated dma channels for busif0 to 7

PATCH In review [email protected] 2 participants 2 messages Oct 10, 2018 – Oct 11, 2018

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 ASoC: rsnd: ssi: Request dedicated dma channels for busif0 to 7

From: Jiada Wang <[email protected]>

Currently ssi driver only requests dma channel for SSI_0, with naming of 'rxu/txu', which is used to transfer data to/from busif0. But for GEN2/GEN3, there are also busif1 ~ busif7, which need to be used when SSI works in TDM Split/Ex-Split mode.

This patch adds support to firstly try to request busif indexed dma channel with naming "rxu[busif]/txu[busif]", if these dma channel don't exist, then try to request 'rxu/txu' dma channel to keep compatibility with platform hasn't had device-tree updated.

---
v3:
- Drop device-tree changes
- Drop automatic busif selection

v2:
- Instead of configure BUSIF by kctl interface "SSI Out/In BUSIF", use rsnd_ssi_select_busif() to automatically select BUSIF.
- Keep 'rxu/txu' dma request, to keep compatibility with GEN2 series
- Re-order patch-set to satisfy git bisect

v1: initial version

---
 sound/soc/sh/rcar/ssi.c | 37 ++++++++++++++++++++++++++++++++-----
 1 file changed, 32 insertions(+), 5 deletions(-)
sound/soc/sh/rcar/ssi.c +32 -5
index 3adcc4f778f7..7e21b29249d7 100644
@@ -76,6 +76,8 @@
 
 #define SSI_NAME "ssi"
 
+#define SSI_DMA_NAME_SIZE	10
+
 struct rsnd_ssi {
 	struct rsnd_mod mod;
 
@@ -938,12 +940,37 @@ static struct dma_chan *rsnd_ssi_dma_req(struct rsnd_dai_stream *io,
 {
 	struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
 	int is_play = rsnd_io_is_play(io);
-	char *name;
+	char name[SSI_DMA_NAME_SIZE];
 
-	if (rsnd_ssi_use_busif(io))
-		name = is_play ? "rxu" : "txu";
-	else
-		name = is_play ? "rx" : "tx";
+	if (rsnd_ssi_use_busif(io)) {
+		int busif = rsnd_ssi_get_busif(io);
+		struct dma_chan *chan = NULL;
+
+		/* try to request rxu/txu channel with busif index first */
+		if (is_play)
+			snprintf(name, SSI_DMA_NAME_SIZE, "rxu%d", busif);
+		else
+			snprintf(name, SSI_DMA_NAME_SIZE, "txu%d", busif);
+
+		chan = rsnd_dma_request_channel(rsnd_ssi_of_node(priv),
+						mod, name);
+		if (!IS_ERR(chan))
+			return chan;
+
+		/*
+		 * If dma channel with busif index doesn't exist
+		 * request rxu/txu dma channel
+		 */
+		if (is_play)
+			snprintf(name, SSI_DMA_NAME_SIZE, "rxu");
+		else
+			snprintf(name, SSI_DMA_NAME_SIZE, "txu");
+	} else {
+		if (is_play)
+			snprintf(name, SSI_DMA_NAME_SIZE, "rx");
+		else
+			snprintf(name, SSI_DMA_NAME_SIZE, "tx");
+	}
 
 	return rsnd_dma_request_channel(rsnd_ssi_of_node(priv),
 					mod, name);
Signature · 1 line
2.17.0
#1 lore raw

Hi

Quoted 5 lines

Currently ssi driver only requests dma channel for SSI_0, with naming of 'rxu/txu', which is used to transfer data to/from busif0. But for GEN2/GEN3, there are also busif1 ~ busif7, which need to be used when SSI works in TDM Split/Ex-Split mode.

Quoted 7 lines

This patch adds support to firstly try to request busif indexed dma channel with naming "rxu[busif]/txu[busif]", if these dma channel don't exist, then try to request 'rxu/txu' dma channel to keep compatibility with platform hasn't had device-tree updated.

---

In my understanding, we agreed that we will have new "ssiu" on DT. This means "ssi" side expansion is no longer needed.

Of course we need to consider about compatibility then.

Best regards
---
Kuninori Morimoto