RISC-V: Build flat and compressed kernel images
PATCH 1/1 RISC-V: Build flat and compressed kernel images
This patch extends Linux RISC-V build system to build and install:
Image - Flat uncompressed kernel image
Image.gz - Flat and GZip compressed kernel image
Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of booting flat and compressed kernel images. In case of Uboot, booting Image or Image.gz is achieved using bootm command.
The flat and uncompressed kernel image (i.e. Image) is very useful in pre-silicon developent and testing because we can create back-door HEX files for RAM on FPGAs from Image.
--- arch/riscv/Makefile | 15 ++++++++- arch/riscv/boot/.gitignore | 2 ++ arch/riscv/boot/Makefile | 33 ++++++++++++++++++ arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++ arch/riscv/kernel/head.S | 10 ++++++ arch/riscv/kernel/vmlinux.lds.S | 2 +- 6 files changed, 120 insertions(+), 2 deletions(-) create mode 100644 arch/riscv/boot/.gitignore create mode 100644 arch/riscv/boot/Makefile create mode 100644 arch/riscv/boot/install.sh
arch/riscv/Makefile +14 -1
@@ -71,10 +71,23 @@ KBUILD_CFLAGS += $(call cc-option,-mstrict-align) # arch specific predefines for sparse CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS) +# Default target when executing plain make +boot := arch/riscv/boot +KBUILD_IMAGE := $(boot)/Image.gz + head-y := arch/riscv/kernel/head.o core-y += arch/riscv/kernel/ arch/riscv/mm/ libs-y += arch/riscv/lib/ -all: vmlinux +all: Image.gz + +Image: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +Image.%: Image + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +zinstall install: + $(Q)$(MAKE) $(build)=$(boot) $@
arch/riscv/boot/.gitignore new file +2 -0
@@ -0,0 +1,2 @@ +Image +Image.gz
arch/riscv/boot/Makefile new file +33 -0
@@ -0,0 +1,33 @@ +# +# arch/riscv/boot/Makefile +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2018, Anup Patel. +# Author: Anup Patel <[email protected]> +# +# Based on the ia64 and arm64 boot/Makefile. +# + +OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S + +targets := Image + +$(obj)/Image: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/Image.gz: $(obj)/Image FORCE + $(call if_changed,gzip) + +install: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/Image System.map "$(INSTALL_PATH)" + +zinstall: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/Image.gz System.map "$(INSTALL_PATH)"
arch/riscv/boot/install.sh new file +60 -0
60 lines not on this page · raw message
arch/riscv/kernel/head.S +10 -0
@@ -44,6 +44,16 @@ ENTRY(_start) amoadd.w a3, a2, (a3) bnez a3, .Lsecondary_start + /* Clear BSS for flat non-ELF images */ + la a3, __bss_start + la a4, __bss_stop + ble a4, a3, clear_bss_done +clear_bss: + REG_S zero, (a3) + add a3, a3, RISCV_SZPTR + blt a3, a4, clear_bss +clear_bss_done: + /* Save hart ID and DTB physical address */ mv s0, a0 mv s1, a1
arch/riscv/kernel/vmlinux.lds.S +1 -1
@@ -74,7 +74,7 @@ SECTIONS *(.sbss*) } - BSS_SECTION(0, 0, 0) + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0) EXCEPTION_TABLE(0x10) NOTES
Signature · 1 line
2.17.1
Quoted 193 lines · anup at brainfault.org
This patch extends Linux RISC-V build system to build and install:
Image - Flat uncompressed kernel image
Image.gz - Flat and GZip compressed kernel imageQuiet a few bootloaders (such as Uboot, UEFI, etc) are capable of booting flat and compressed kernel images. In case of Uboot, booting Image or Image.gz is achieved using bootm command.
The flat and uncompressed kernel image (i.e. Image) is very useful in pre-silicon developent and testing because we can create back-door HEX files for RAM on FPGAs from Image.
Signed-off-by Anup Patel <[email protected]>--- arch/riscv/Makefile | 15 ++++++++- arch/riscv/boot/.gitignore | 2 ++ arch/riscv/boot/Makefile | 33 ++++++++++++++++++ arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++ arch/riscv/kernel/head.S | 10 ++++++ arch/riscv/kernel/vmlinux.lds.S | 2 +- 6 files changed, 120 insertions(+), 2 deletions(-) create mode 100644 arch/riscv/boot/.gitignore create mode 100644 arch/riscv/boot/Makefile create mode 100644 arch/riscv/boot/install.sharch/riscv/Makefile +14
-1@@ -71,10 +71,23 @@ KBUILD_CFLAGS += $(call cc-option,-mstrict-align) # arch specific predefines for sparse CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS) +# Default target when executing plain make +boot := arch/riscv/boot +KBUILD_IMAGE := $(boot)/Image.gz + head-y := arch/riscv/kernel/head.o core-y += arch/riscv/kernel/ arch/riscv/mm/ libs-y += arch/riscv/lib/ -all: vmlinux +all: Image.gz + +Image: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +Image.%: Image + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +zinstall install: + $(Q)$(MAKE) $(build)=$(boot) $@arch/riscv/boot/.gitignore new file +2
-0@@ -0,0 +1,2 @@ +Image +Image.gzarch/riscv/boot/Makefile new file +33
-0@@ -0,0 +1,33 @@ +# +# arch/riscv/boot/Makefile +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2018, Anup Patel. +# Author: Anup Patel <[email protected]> +# +# Based on the ia64 and arm64 boot/Makefile. +# + +OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S + +targets := Image + +$(obj)/Image: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/Image.gz: $(obj)/Image FORCE + $(call if_changed,gzip) + +install: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/Image System.map "$(INSTALL_PATH)" + +zinstall: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/Image.gz System.map "$(INSTALL_PATH)"arch/riscv/boot/install.sh new file +60
-0@@ -0,0 +1,60 @@ +#!/bin/sh +# +# arch/riscv/boot/install.sh +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1995 by Linus Torvalds +# +# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin +# Adapted from code in arch/i386/boot/install.sh by Russell King +# +# "make install" script for the RISC-V Linux port +# +# Arguments: +# $1 - kernel version +# $2 - kernel image file +# $3 - kernel map file +# $4 - default install path (blank if root directory) +# + +verify () { + if [ ! -f "$1" ]; then + echo "" 1>&2 + echo " *** Missing file: $1" 1>&2 + echo ' *** You need to run "make" before "make install".' 1>&2 + echo "" 1>&2 + exit 1 + fi +} + +# Make sure the files actually exist +verify "$2" +verify "$3" + +# User may have a custom install script +if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi +if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi + +if [ "$(basename $2)" = "Image.gz" ]; then +# Compressed install + echo "Installing compressed kernel" + base=vmlinuz +else +# Normal install + echo "Installing normal kernel" + base=vmlinux +fi + +if [ -f $4/$base-$1 ]; then + mv $4/$base-$1 $4/$base-$1.old +fi +cat $2 > $4/$base-$1 + +# Install system map file +if [ -f $4/System.map-$1 ]; then + mv $4/System.map-$1 $4/System.map-$1.old +fi +cp $3 $4/System.map-$1arch/riscv/kernel/head.S +10
-0@@ -44,6 +44,16 @@ ENTRY(_start) amoadd.w a3, a2, (a3) bnez a3, .Lsecondary_start + /* Clear BSS for flat non-ELF images */ + la a3, __bss_start + la a4, __bss_stop + ble a4, a3, clear_bss_done +clear_bss: + REG_S zero, (a3) + add a3, a3, RISCV_SZPTR + blt a3, a4, clear_bss +clear_bss_done: + /* Save hart ID and DTB physical address */ mv s0, a0 mv s1, a1arch/riscv/kernel/vmlinux.lds.S +0
-0
arch/riscv/kernel/vmlinux.lds.S SECTIONS · line 77
Quoted 5 lines
arch/riscv/kernel/vmlinux.lds.S +1
-1@@ -74,7 +74,7 @@ SECTIONS *(.sbss*) } - BSS_SECTION(0, 0, 0) + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
What does this do?
arch/riscv/kernel/vmlinux.lds.S SECTIONS · line 80
Quoted 3 lines
arch/riscv/kernel/vmlinux.lds.S +0
-0EXCEPTION_TABLE(0x10) NOTES
Thanks! I'm going to target this for the RCs as well: it's technically a new feature, but it seems pretty safe -- assuming the BSS_SECTION change can be explained to me :)
Quoted 198 lines · Palmer Dabbelt
Quoted 196 lines · anup at brainfault.org
This patch extends Linux RISC-V build system to build and install:
Image - Flat uncompressed kernel image
Image.gz - Flat and GZip compressed kernel imageQuiet a few bootloaders (such as Uboot, UEFI, etc) are capable of booting flat and compressed kernel images. In case of Uboot, booting Image or Image.gz is achieved using bootm command.
The flat and uncompressed kernel image (i.e. Image) is very useful in pre-silicon developent and testing because we can create back-door HEX files for RAM on FPGAs from Image.
Signed-off-by Anup Patel <[email protected]>--- arch/riscv/Makefile | 15 ++++++++- arch/riscv/boot/.gitignore | 2 ++ arch/riscv/boot/Makefile | 33 ++++++++++++++++++ arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++ arch/riscv/kernel/head.S | 10 ++++++ arch/riscv/kernel/vmlinux.lds.S | 2 +- 6 files changed, 120 insertions(+), 2 deletions(-) create mode 100644 arch/riscv/boot/.gitignore create mode 100644 arch/riscv/boot/Makefile create mode 100644 arch/riscv/boot/install.sharch/riscv/Makefile +14
-1@@ -71,10 +71,23 @@ KBUILD_CFLAGS += $(call cc-option,-mstrict-align) # arch specific predefines for sparse CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS) +# Default target when executing plain make +boot := arch/riscv/boot +KBUILD_IMAGE := $(boot)/Image.gz + head-y := arch/riscv/kernel/head.o core-y += arch/riscv/kernel/ arch/riscv/mm/ libs-y += arch/riscv/lib/ -all: vmlinux +all: Image.gz + +Image: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +Image.%: Image + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +zinstall install: + $(Q)$(MAKE) $(build)=$(boot) $@arch/riscv/boot/.gitignore new file +2
-0@@ -0,0 +1,2 @@ +Image +Image.gzarch/riscv/boot/Makefile new file +33
-0@@ -0,0 +1,33 @@ +# +# arch/riscv/boot/Makefile +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2018, Anup Patel. +# Author: Anup Patel <[email protected]> +# +# Based on the ia64 and arm64 boot/Makefile. +# + +OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S + +targets := Image + +$(obj)/Image: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/Image.gz: $(obj)/Image FORCE + $(call if_changed,gzip) + +install: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/Image System.map "$(INSTALL_PATH)" + +zinstall: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/Image.gz System.map "$(INSTALL_PATH)"arch/riscv/boot/install.sh new file +60
-0@@ -0,0 +1,60 @@ +#!/bin/sh +# +# arch/riscv/boot/install.sh +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1995 by Linus Torvalds +# +# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin +# Adapted from code in arch/i386/boot/install.sh by Russell King +# +# "make install" script for the RISC-V Linux port +# +# Arguments: +# $1 - kernel version +# $2 - kernel image file +# $3 - kernel map file +# $4 - default install path (blank if root directory) +# + +verify () { + if [ ! -f "$1" ]; then + echo "" 1>&2 + echo " *** Missing file: $1" 1>&2 + echo ' *** You need to run "make" before "make install".' 1>&2 + echo "" 1>&2 + exit 1 + fi +} + +# Make sure the files actually exist +verify "$2" +verify "$3" + +# User may have a custom install script +if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi +if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi + +if [ "$(basename $2)" = "Image.gz" ]; then +# Compressed install + echo "Installing compressed kernel" + base=vmlinuz +else +# Normal install + echo "Installing normal kernel" + base=vmlinux +fi + +if [ -f $4/$base-$1 ]; then + mv $4/$base-$1 $4/$base-$1.old +fi +cat $2 > $4/$base-$1 + +# Install system map file +if [ -f $4/System.map-$1 ]; then + mv $4/System.map-$1 $4/System.map-$1.old +fi +cp $3 $4/System.map-$1arch/riscv/kernel/head.S +10
-0@@ -44,6 +44,16 @@ ENTRY(_start) amoadd.w a3, a2, (a3) bnez a3, .Lsecondary_start + /* Clear BSS for flat non-ELF images */ + la a3, __bss_start + la a4, __bss_stop + ble a4, a3, clear_bss_done +clear_bss: + REG_S zero, (a3) + add a3, a3, RISCV_SZPTR + blt a3, a4, clear_bss +clear_bss_done: + /* Save hart ID and DTB physical address */ mv s0, a0 mv s1, a1arch/riscv/kernel/vmlinux.lds.S +0
-0@@ -74,7 +74,7 @@ SECTIONS *(.sbss*) }
Quoted 4 lines
arch/riscv/kernel/vmlinux.lds.S SECTIONS · line 77
Quoted 2 lines
arch/riscv/kernel/vmlinux.lds.S +1
-1- BSS_SECTION(0, 0, 0) + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)What does this do?
If bootloader is loading vmlinux ELF then it will take care of zeroing BSS and SBSS section.
If we have FLAT image then the head.S has to zero-out BSS and SBSS on boot HART. The secondary/non-boot HART don't need to clear BSS and SBSS.
Now with BSS_SECTION(0, 0, 0), there is no alignment constraint on start of BSS and SBSS section so the BSS zeroing code in head.S has handle unaligned BSS and SBSS (i.e. not aligned to XLEN / 8 bytes). To simplify, I have made BSS and SBSS start as page aligned and put a simple assembly code in head.S to zero-out BSS and SBSS.
Of course, we can also use BSS_SECTION(16, 16, 0) but I thought of avoiding magic values and made it page aligned (like few other architectures).
Quoted 8 lines
arch/riscv/kernel/vmlinux.lds.S SECTIONS · line 80
Quoted 4 lines
arch/riscv/kernel/vmlinux.lds.S +0
-0EXCEPTION_TABLE(0x10) NOTESThanks! I'm going to target this for the RCs as well: it's technically a new feature, but it seems pretty safe -- assuming the
BSS_SECTIONchange can be explained to me :)
Thanks,
Anup
Quoted 218 lines · anup at brainfault.org
Quoted 198 lines · Palmer Dabbelt
Quoted 196 lines · anup at brainfault.org
This patch extends Linux RISC-V build system to build and install:
Image - Flat uncompressed kernel image
Image.gz - Flat and GZip compressed kernel imageQuiet a few bootloaders (such as Uboot, UEFI, etc) are capable of booting flat and compressed kernel images. In case of Uboot, booting Image or Image.gz is achieved using bootm command.
The flat and uncompressed kernel image (i.e. Image) is very useful in pre-silicon developent and testing because we can create back-door HEX files for RAM on FPGAs from Image.
Signed-off-by Anup Patel <[email protected]>--- arch/riscv/Makefile | 15 ++++++++- arch/riscv/boot/.gitignore | 2 ++ arch/riscv/boot/Makefile | 33 ++++++++++++++++++ arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++ arch/riscv/kernel/head.S | 10 ++++++ arch/riscv/kernel/vmlinux.lds.S | 2 +- 6 files changed, 120 insertions(+), 2 deletions(-) create mode 100644 arch/riscv/boot/.gitignore create mode 100644 arch/riscv/boot/Makefile create mode 100644 arch/riscv/boot/install.sharch/riscv/Makefile +14
-1@@ -71,10 +71,23 @@ KBUILD_CFLAGS += $(call cc-option,-mstrict-align) # arch specific predefines for sparse CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS) +# Default target when executing plain make +boot := arch/riscv/boot +KBUILD_IMAGE := $(boot)/Image.gz + head-y := arch/riscv/kernel/head.o core-y += arch/riscv/kernel/ arch/riscv/mm/ libs-y += arch/riscv/lib/ -all: vmlinux +all: Image.gz + +Image: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +Image.%: Image + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +zinstall install: + $(Q)$(MAKE) $(build)=$(boot) $@arch/riscv/boot/.gitignore new file +2
-0@@ -0,0 +1,2 @@ +Image +Image.gzarch/riscv/boot/Makefile new file +33
-0@@ -0,0 +1,33 @@ +# +# arch/riscv/boot/Makefile +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2018, Anup Patel. +# Author: Anup Patel <[email protected]> +# +# Based on the ia64 and arm64 boot/Makefile. +# + +OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S + +targets := Image + +$(obj)/Image: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/Image.gz: $(obj)/Image FORCE + $(call if_changed,gzip) + +install: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/Image System.map "$(INSTALL_PATH)" + +zinstall: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/Image.gz System.map "$(INSTALL_PATH)"arch/riscv/boot/install.sh new file +60
-0@@ -0,0 +1,60 @@ +#!/bin/sh +# +# arch/riscv/boot/install.sh +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1995 by Linus Torvalds +# +# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin +# Adapted from code in arch/i386/boot/install.sh by Russell King +# +# "make install" script for the RISC-V Linux port +# +# Arguments: +# $1 - kernel version +# $2 - kernel image file +# $3 - kernel map file +# $4 - default install path (blank if root directory) +# + +verify () { + if [ ! -f "$1" ]; then + echo "" 1>&2 + echo " *** Missing file: $1" 1>&2 + echo ' *** You need to run "make" before "make install".' 1>&2 + echo "" 1>&2 + exit 1 + fi +} + +# Make sure the files actually exist +verify "$2" +verify "$3" + +# User may have a custom install script +if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi +if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi + +if [ "$(basename $2)" = "Image.gz" ]; then +# Compressed install + echo "Installing compressed kernel" + base=vmlinuz +else +# Normal install + echo "Installing normal kernel" + base=vmlinux +fi + +if [ -f $4/$base-$1 ]; then + mv $4/$base-$1 $4/$base-$1.old +fi +cat $2 > $4/$base-$1 + +# Install system map file +if [ -f $4/System.map-$1 ]; then + mv $4/System.map-$1 $4/System.map-$1.old +fi +cp $3 $4/System.map-$1arch/riscv/kernel/head.S +10
-0@@ -44,6 +44,16 @@ ENTRY(_start) amoadd.w a3, a2, (a3) bnez a3, .Lsecondary_start + /* Clear BSS for flat non-ELF images */ + la a3, __bss_start + la a4, __bss_stop + ble a4, a3, clear_bss_done +clear_bss: + REG_S zero, (a3) + add a3, a3, RISCV_SZPTR + blt a3, a4, clear_bss +clear_bss_done: + /* Save hart ID and DTB physical address */ mv s0, a0 mv s1, a1arch/riscv/kernel/vmlinux.lds.S +0
-0@@ -74,7 +74,7 @@ SECTIONS *(.sbss*) }Quoted 4 lines
arch/riscv/kernel/vmlinux.lds.S SECTIONS · line 77
Quoted 2 lines
arch/riscv/kernel/vmlinux.lds.S +1
-1- BSS_SECTION(0, 0, 0) + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)What does this do?
If bootloader is loading vmlinux ELF then it will take care of zeroing BSS and SBSS section.
If we have FLAT image then the
head.Shas to zero-out BSS and SBSS on boot HART. The secondary/non-boot HART don't need to clear BSS and SBSS.Now with
BSS_SECTION(0, 0, 0), there is no alignment constraint on start of BSS and SBSS section so the BSS zeroing code inhead.Shas handle unaligned BSS and SBSS (i.e. not aligned to XLEN / 8 bytes). To simplify, I have made BSS and SBSS start as page aligned and put a simple assembly code inhead.Sto zero-out BSS and SBSS.
Quoted 3 lines
Of course, we can also use
BSS_SECTION(16, 16, 0)but I thought of avoiding magic values and made it page aligned (like few other architectures).
Makes sense, at least for now. We might want to default to alignment to a larger alignment (2MiB on rv64i, 4MiB on rv32i) at some point, but that's a larger discussion.
I've already queued this up for this week's PR, which I'll tag as soon as I managed to get through my email :)
Quoted 12 lines
Quoted 9 lines
arch/riscv/kernel/vmlinux.lds.S SECTIONS · line 80
Quoted 5 lines
arch/riscv/kernel/vmlinux.lds.S +0
-0EXCEPTION_TABLE(0x10) NOTESThanks! I'm going to target this for the RCs as well: it's technically a new feature, but it seems pretty safe -- assuming the
BSS_SECTIONchange can be explained to me :)Thanks,
Anup
Quoted 6 lines · Anup Patel
This patch extends Linux RISC-V build system to build and install:
Image - Flat uncompressed kernel image
Image.gz - Flat and GZip compressed kernel imageQuiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
nits: U-Boot
Quoted 1 line
booting flat and compressed kernel images. In case of Uboot, booting
nits: U-Boot
Quoted 7 lines
Image or Image.gz is achieved using bootm command.
The flat and uncompressed kernel image (i.e. Image) is very useful in pre-silicon developent and testing because we can create back-door HEX files for RAM on FPGAs from Image.
Signed-off-by Anup Patel <[email protected]>
Quoted 12 lines
--- arch/riscv/Makefile | 15 ++++++++- arch/riscv/boot/.gitignore | 2 ++ arch/riscv/boot/Makefile | 33 ++++++++++++++++++ arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++ arch/riscv/kernel/head.S | 10 ++++++ arch/riscv/kernel/vmlinux.lds.S | 2 +- 6 files changed, 120 insertions(+), 2 deletions(-) create mode 100644 arch/riscv/boot/.gitignore create mode 100644 arch/riscv/boot/Makefile create mode 100644 arch/riscv/boot/install.sh
Tested with U-Boot s-mode on QEMU virt, using bootm to boot the kernel
Regards,
Bin
Quoted 6 lines · bmeng.cn at gmail.com
Quoted 5 lines · Anup Patel
This patch extends Linux RISC-V build system to build and install:
Image - Flat uncompressed kernel image
Image.gz - Flat and GZip compressed kernel image
Quoted 7 lines
Quoted 1 line
Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
nits: U-Boot
Quoted 1 line
booting flat and compressed kernel images. In case of Uboot, booting
nits: U-Boot
Thanks for the review. The PR has already been tagged, but it's not scheduled to be sent out until later today. I generally try to avoid rewriting the tags unless there's something major that's wrong, so unless you feel very strongly about this then I think I'll let it stand.
Let me know if this is a big deal for you, I can rewrite things.
Quoted 20 lines
Quoted 7 lines
Image or Image.gz is achieved using bootm command.
The flat and uncompressed kernel image (i.e. Image) is very useful in pre-silicon developent and testing because we can create back-door HEX files for RAM on FPGAs from Image.
Signed-off-by Anup Patel <[email protected]>Quoted 12 lines
--- arch/riscv/Makefile | 15 ++++++++- arch/riscv/boot/.gitignore | 2 ++ arch/riscv/boot/Makefile | 33 ++++++++++++++++++ arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++ arch/riscv/kernel/head.S | 10 ++++++ arch/riscv/kernel/vmlinux.lds.S | 2 +- 6 files changed, 120 insertions(+), 2 deletions(-) create mode 100644 arch/riscv/boot/.gitignore create mode 100644 arch/riscv/boot/Makefile create mode 100644 arch/riscv/boot/install.sh
Quoted 4 lines
Reviewed-by Bin Meng <[email protected]>Tested with U-Boot s-mode on QEMU virt, using bootm to boot the kernel
Tested-by Bin Meng <[email protected]>
I also won't include the tags unless I rewrite the tags.
Thanks for the review!
Hi Palmer,
Quoted 43 lines · Palmer Dabbelt
Quoted 6 lines · bmeng.cn at gmail.com
Quoted 5 lines · Anup Patel
This patch extends Linux RISC-V build system to build and install:
Image - Flat uncompressed kernel image
Image.gz - Flat and GZip compressed kernel imageQuoted 7 lines
Quoted 1 line
Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
nits: U-Boot
Quoted 1 line
booting flat and compressed kernel images. In case of Uboot, booting
nits: U-Boot
Thanks for the review. The PR has already been tagged, but it's not scheduled to be sent out until later today. I generally try to avoid rewriting the tags unless there's something major that's wrong, so unless you feel very strongly about this then I think I'll let it stand.
Let me know if this is a big deal for you, I can rewrite things.
Quoted 20 lines
Quoted 19 lines
Image or Image.gz is achieved using bootm command.
The flat and uncompressed kernel image (i.e. Image) is very useful in pre-silicon developent and testing because we can create back-door HEX files for RAM on FPGAs from Image.
Signed-off-by Anup Patel <[email protected]>--- arch/riscv/Makefile | 15 ++++++++- arch/riscv/boot/.gitignore | 2 ++ arch/riscv/boot/Makefile | 33 ++++++++++++++++++ arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++ arch/riscv/kernel/head.S | 10 ++++++ arch/riscv/kernel/vmlinux.lds.S | 2 +- 6 files changed, 120 insertions(+), 2 deletions(-) create mode 100644 arch/riscv/boot/.gitignore create mode 100644 arch/riscv/boot/Makefile create mode 100644 arch/riscv/boot/install.sh
Quoted 8 lines
Quoted 4 lines
Reviewed-by Bin Meng <[email protected]>Tested with U-Boot s-mode on QEMU virt, using bootm to boot the kernel
Tested-by Bin Meng <[email protected]>I also won't include the tags unless I rewrite the tags.
Thanks for the review!
Thanks. Let's go with this as it's a minor nits.
Regards,
Bin