Skip to contentSkip to conversation

dma: tegra: fix incorrect case of DMA

PATCH New Ben Dooks 1 participant 1 message Nov 14, 2018

Subsystems (3)
Tegra architecture support dmaengine Tegra DMA drivers
lore
Share & tools
lore

Ben Dooks

author
#0 lore raw

PATCH 3/3 dma: tegra: fix incorrect case of DMA

The use of Dma is annoying, since it is an acronym so should be all upper case. Fix this throughout the driver.

Reviewed-by Dmitry Osipenko <[email protected]>
Signed-off-by Ben Dooks <[email protected]>

---
Fixes since v1:
- Missing cases fixed as pointed out by Dmitry Osipenko

---
 drivers/dma/tegra20-apb-dma.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/dma/tegra20-apb-dma.c +10 -10
index adfd918baedc..ec8938a2ecab 100644
@@ -146,7 +146,7 @@ struct tegra_dma_channel_regs {
 };
 
 /*
- * tegra_dma_sg_req: Dma request details to configure hardware. This
+ * tegra_dma_sg_req: DMA request details to configure hardware. This
  * contains the details for one transfer to configure DMA hw.
  * The client's request for data transfer can be broken into multiple
  * sub-transfer as per requester details and hw support.

@@ -574,7 +574,7 @@ static bool handle_continuous_head_request(struct tegra_dma_channel *tdc,
 	struct tegra_dma_sg_req *hsgreq = NULL;
 
 	if (list_empty(&tdc->pending_sg_req)) {
-		dev_err(tdc2dev(tdc), "Dma is running without req\n");
+		dev_err(tdc2dev(tdc), "DMA is running without req\n");
 		tegra_dma_stop(tdc);
 		return false;
 	}

@@ -587,7 +587,7 @@ static bool handle_continuous_head_request(struct tegra_dma_channel *tdc,
 	hsgreq = list_first_entry(&tdc->pending_sg_req, typeof(*hsgreq), node);
 	if (!hsgreq->configured) {
 		tegra_dma_stop(tdc);
-		dev_err(tdc2dev(tdc), "Error in dma transfer, aborting dma\n");
+		dev_err(tdc2dev(tdc), "Error in DMA transfer, aborting DMA\n");
 		tegra_dma_abort_all(tdc);
 		return false;
 	}

@@ -922,7 +922,7 @@ static int get_transfer_param(struct tegra_dma_channel *tdc,
 		return 0;
 
 	default:
-		dev_err(tdc2dev(tdc), "Dma direction is not supported\n");
+		dev_err(tdc2dev(tdc), "DMA direction is not supported\n");
 		return -EINVAL;
 	}
 	return -EINVAL;

@@ -955,7 +955,7 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
 	enum dma_slave_buswidth slave_bw;
 
 	if (!tdc->config_init) {
-		dev_err(tdc2dev(tdc), "dma channel is not configured\n");
+		dev_err(tdc2dev(tdc), "DMA channel is not configured\n");
 		return NULL;
 	}
 	if (sg_len < 1) {

@@ -988,7 +988,7 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
 
 	dma_desc = tegra_dma_desc_get(tdc);
 	if (!dma_desc) {
-		dev_err(tdc2dev(tdc), "Dma descriptors not available\n");
+		dev_err(tdc2dev(tdc), "DMA descriptors not available\n");
 		return NULL;
 	}
 	INIT_LIST_HEAD(&dma_desc->tx_list);

@@ -1008,14 +1008,14 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
 		if ((len & 3) || (mem & 3) ||
 				(len > tdc->tdma->chip_data->max_dma_count)) {
 			dev_err(tdc2dev(tdc),
-				"Dma length/memory address is not supported\n");
+				"DMA length/memory address is not supported\n");
 			tegra_dma_desc_put(tdc, dma_desc);
 			return NULL;
 		}
 
 		sg_req = tegra_dma_sg_req_get(tdc);
 		if (!sg_req) {
-			dev_err(tdc2dev(tdc), "Dma sg-req not available\n");
+			dev_err(tdc2dev(tdc), "DMA sg-req not available\n");
 			tegra_dma_desc_put(tdc, dma_desc);
 			return NULL;
 		}

@@ -1090,7 +1090,7 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
 	 * terminating the DMA.
 	 */
 	if (tdc->busy) {
-		dev_err(tdc2dev(tdc), "Request not allowed when dma running\n");
+		dev_err(tdc2dev(tdc), "Request not allowed when DMA running\n");
 		return NULL;
 	}
 

@@ -1147,7 +1147,7 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
 	while (remain_len) {
 		sg_req = tegra_dma_sg_req_get(tdc);
 		if (!sg_req) {
-			dev_err(tdc2dev(tdc), "Dma sg-req not available\n");
+			dev_err(tdc2dev(tdc), "DMA sg-req not available\n");
 			tegra_dma_desc_put(tdc, dma_desc);
 			return NULL;
 		}