Skip to contentSkip to conversation

Break down the MTP write operation

PATCH Superseded Bandan Das 2 participants 4 messages Nov 15, 2018 – Jan 8, 2019

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Bandan Das

author
#0 lore raw

cover Break down the MTP write operation

For larger files, not only do we keep reallocating to increase the mtp buffer size, the write also happens in one go. This does two things:

Write to file upto a certain data size we have received so far and second, reuse the buffer again instead of reallocating to a larger buffer size.

Tested with different file sizes on a Linux guest.

Bandan Das (2):
usb-mtp: Reallocate buffer in multiples of MTP_WRITE_BUF_SZ
usb-mtp: breakup MTP write into smaller chunks

 hw/usb/dev-mtp.c | 153 +++++++++++++++++++++++++++++++++++--------------------
 1 file changed, 99 insertions(+), 54 deletions(-)
Signature · 1 line
2.14.4
author
#1 lore raw

PATCH 1/2 usb-mtp: Reallocate buffer in multiples of MTP_WRITE_BUF_SZ

This is a "pre-patch" to breaking up the write buffer for MTP writes. Instead of allocating a mtp buffer equal to size sent by the initiator, we start with a small size and reallocate multiples (of that small size) as needed.

---
 hw/usb/dev-mtp.c | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)
hw/usb/dev-mtp.c +12 -14
index 00a3691bae..de941d649c 100644
@@ -152,7 +152,6 @@ struct MTPData {
     bool         first;
     /* Used for >4G file sizes */
     bool         pending;
-    uint64_t     cached_length;
     int          fd;
 };
 
@@ -244,6 +243,7 @@ typedef struct {
 
 #define MTP_MANUFACTURER  "QEMU"
 #define MTP_PRODUCT       "QEMU filesharing"
+#define MTP_WRITE_BUF_SZ  512000
 
 enum {
     STR_MANUFACTURER = 1,
@@ -1647,7 +1647,7 @@ static void usb_mtp_write_data(MTPState *s)
             d->fd = mkdir(path, mask);
             goto free;
         }
-        if ((s->dataset.size != 0xFFFFFFFF) && (s->dataset.size < d->length)) {
+        if ((s->dataset.size != 0xFFFFFFFF) && (s->dataset.size != d->offset)) {
             usb_mtp_queue_result(s, RES_STORE_FULL, d->trans,
                                  0, 0, 0, 0);
             goto done;
@@ -1757,17 +1757,21 @@ static void usb_mtp_get_data(MTPState *s, mtp_container *container,
         total_len = cpu_to_le32(container->length) - sizeof(mtp_container);
         /* Length of data in this packet */
         data_len -= sizeof(mtp_container);
-        usb_mtp_realloc(d, total_len);
-        d->length += total_len;
+        if (total_len < MTP_WRITE_BUF_SZ) {
+                usb_mtp_realloc(d, total_len);
+                d->length += total_len;
+        } else {
+                usb_mtp_realloc(d, MTP_WRITE_BUF_SZ - sizeof(mtp_container));
+                d->length += MTP_WRITE_BUF_SZ - sizeof(mtp_container);
+        }
         d->offset = 0;
-        d->cached_length = total_len;
         d->first = false;
         d->pending = false;
     }
 
     if (d->pending) {
-        usb_mtp_realloc(d, d->cached_length);
-        d->length += d->cached_length;
+        usb_mtp_realloc(d, MTP_WRITE_BUF_SZ);
+        d->length += MTP_WRITE_BUF_SZ;
         d->pending = false;
     }
 
@@ -1775,12 +1779,6 @@ static void usb_mtp_get_data(MTPState *s, mtp_container *container,
         dlen = data_len;
     } else {
         dlen = d->length - d->offset;
-        /* Check for cached data for large files */
-        if ((s->dataset.size == 0xFFFFFFFF) && (dlen < p->iov.size)) {
-            usb_mtp_realloc(d, p->iov.size - dlen);
-            d->length += p->iov.size - dlen;
-            dlen = p->iov.size;
-        }
     }
 
     switch (d->code) {
@@ -1802,7 +1800,7 @@ static void usb_mtp_get_data(MTPState *s, mtp_container *container,
         d->offset += dlen;
         if ((p->iov.size % 64) || !p->iov.size) {
             assert((s->dataset.size == 0xFFFFFFFF) ||
-                   (s->dataset.size == d->length));
+                   (s->dataset.size == d->offset));
 
             usb_mtp_write_data(s);
             usb_mtp_data_free(s->data_out);
Signature · 1 line
2.14.4
author
#2 lore raw

PATCH 2/2 usb-mtp: breakup MTP write into smaller chunks

In reply to Bandan Das

For every MTP_WRITE_BUF_SZ copied, this patch writes it to file before getting the next block of data. The file is kept opened for the duration of the operation but the sanity checks on the write operation are performed only once when the write operation starts. Additionally, we also update the file size in the object metadata once the file has completely been written.

---
 hw/usb/dev-mtp.c | 133 +++++++++++++++++++++++++++++++++++++------------------
 1 file changed, 90 insertions(+), 43 deletions(-)
hw/usb/dev-mtp.c +90 -43
index de941d649c..fce6029df0 100644
@@ -35,6 +35,13 @@ enum mtp_container_type {
     TYPE_EVENT    = 4,
 };
 
+/* MTP write stage, for internal use only */
+enum mtp_write_status {
+    WRITE_START    = 1,
+    WRITE_CONTINUE = 2,
+    WRITE_END      = 3,
+};
+
 enum mtp_code {
     /* command codes */
     CMD_GET_DEVICE_INFO            = 0x1001,
@@ -153,6 +160,9 @@ struct MTPData {
     /* Used for >4G file sizes */
     bool         pending;
     int          fd;
+    uint8_t      write_status;
+    /* Internal pointer per every MTP_WRITE_BUF_SZ */
+    uint64_t     data_offset;
 };
 
 struct MTPObject {
@@ -1607,10 +1617,14 @@ static void utf16_to_str(uint8_t len, uint16_t *arr, char *name)
 }
 
 /* Wrapper around write, returns 0 on failure */
-static uint64_t write_retry(int fd, void *buf, uint64_t size)
+static uint64_t write_retry(int fd, void *buf, uint64_t size, off_t offset)
 {
         uint64_t bytes_left = size, ret;
 
+        if (lseek(fd, offset, SEEK_SET) < 0) {
+            goto done;
+        }
+
         while (bytes_left > 0) {
                 ret = write(fd, buf, bytes_left);
                 if ((ret == -1) && (errno != EINTR || errno != EAGAIN ||
@@ -1621,9 +1635,20 @@ static uint64_t write_retry(int fd, void *buf, uint64_t size)
                 buf += ret;
         }
 
+done:
         return size - bytes_left;
 }
 
+static void usb_mtp_update_object(MTPObject *parent, char *name)
+{
+    MTPObject *o =
+        usb_mtp_object_lookup_name(parent, name, strlen(name));
+
+    if (o) {
+        lstat(o->path, &o->stat);
+    }
+}
+
 static void usb_mtp_write_data(MTPState *s)
 {
     MTPData *d = s->data_out;
@@ -1635,48 +1660,55 @@ static void usb_mtp_write_data(MTPState *s)
 
     assert(d != NULL);
 
-    if (parent == NULL || !s->write_pending) {
-        usb_mtp_queue_result(s, RES_INVALID_OBJECTINFO, d->trans,
-                             0, 0, 0, 0);
+    switch (d->write_status) {
+    case WRITE_START:
+        if (!parent || !s->write_pending) {
+            usb_mtp_queue_result(s, RES_INVALID_OBJECTINFO, d->trans,
+                0, 0, 0, 0);
         return;
-    }
-
-    if (s->dataset.filename) {
-        path = g_strdup_printf("%s/%s", parent->path, s->dataset.filename);
-        if (s->dataset.format == FMT_ASSOCIATION) {
-            d->fd = mkdir(path, mask);
-            goto free;
-        }
-        if ((s->dataset.size != 0xFFFFFFFF) && (s->dataset.size != d->offset)) {
-            usb_mtp_queue_result(s, RES_STORE_FULL, d->trans,
-                                 0, 0, 0, 0);
-            goto done;
-        }
-        d->fd = open(path, O_CREAT | O_WRONLY, mask);
-        if (d->fd == -1) {
-            usb_mtp_queue_result(s, RES_STORE_FULL, d->trans,
-                                 0, 0, 0, 0);
-            goto done;
         }
 
-        /*
-         * Return success if initiator sent 0 sized data
-         */
-        if (!s->dataset.size) {
-            goto success;
-        }
+        if (s->dataset.filename) {
+            path = g_strdup_printf("%s/%s", parent->path, s->dataset.filename);
+            if (s->dataset.format == FMT_ASSOCIATION) {
+                d->fd = mkdir(path, mask);
+                goto free;
+            }
+            d->fd = open(path, O_CREAT | O_WRONLY, mask);
+            if (d->fd == -1) {
+                usb_mtp_queue_result(s, RES_STORE_FULL, d->trans,
+                                     0, 0, 0, 0);
+                goto done;
+            }
 
-        rc = write_retry(d->fd, d->data, d->offset);
-        if (rc != d->offset) {
+            /* Return success if initiator sent 0 sized data */
+            if (!s->dataset.size) {
+                goto success;
+            }
+            if (d->length != MTP_WRITE_BUF_SZ && !d->pending) {
+                d->write_status = WRITE_END;
+            }
+        }
+        /* fall through */
+    case WRITE_CONTINUE:
+    case WRITE_END:
+        rc = write_retry(d->fd, d->data, d->data_offset,
+                         d->offset - d->data_offset);
+        if (rc != d->data_offset) {
             usb_mtp_queue_result(s, RES_STORE_FULL, d->trans,
                                  0, 0, 0, 0);
             goto done;
+        }
+        if (d->write_status != WRITE_END) {
+            return;
+        } else {
+            /* Only for < 4G file sizes */
+            if (s->dataset.size != 0xFFFFFFFF && d->offset != s->dataset.size) {
+                usb_mtp_queue_result(s, RES_INCOMPLETE_TRANSFER, d->trans,
+                                     0, 0, 0, 0);
+                goto done;
             }
-        /* Only for < 4G file sizes */
-        if (s->dataset.size != 0xFFFFFFFF && rc != s->dataset.size) {
-            usb_mtp_queue_result(s, RES_INCOMPLETE_TRANSFER, d->trans,
-                                 0, 0, 0, 0);
-            goto done;
+            usb_mtp_update_object(parent, s->dataset.filename);
         }
     }
 
@@ -1767,25 +1799,33 @@ static void usb_mtp_get_data(MTPState *s, mtp_container *container,
         d->offset = 0;
         d->first = false;
         d->pending = false;
+        d->data_offset = 0;
+        d->write_status = WRITE_START;
     }
 
     if (d->pending) {
-        usb_mtp_realloc(d, MTP_WRITE_BUF_SZ);
-        d->length += MTP_WRITE_BUF_SZ;
+        memset(d->data, 0, d->length);
+        if (d->length != MTP_WRITE_BUF_SZ) {
+            usb_mtp_realloc(d, MTP_WRITE_BUF_SZ - d->length);
+            d->length += (MTP_WRITE_BUF_SZ - d->length);
+        }
         d->pending = false;
+        d->write_status = WRITE_CONTINUE;
+        d->data_offset = 0;
     }
 
-    if (d->length - d->offset > data_len) {
+    if (d->length - d->data_offset > data_len) {
         dlen = data_len;
     } else {
-        dlen = d->length - d->offset;
+        dlen = d->length - d->data_offset;
     }
 
     switch (d->code) {
     case CMD_SEND_OBJECT_INFO:
-        usb_packet_copy(p, d->data + d->offset, dlen);
+        usb_packet_copy(p, d->data + d->data_offset, dlen);
         d->offset += dlen;
-        if (d->offset == d->length) {
+        d->data_offset += dlen;
+        if (d->data_offset == d->length) {
             /* The operation might have already failed */
             if (!s->result) {
                 usb_mtp_write_metadata(s);
@@ -1796,19 +1836,26 @@ static void usb_mtp_get_data(MTPState *s, mtp_container *container,
         }
         break;
     case CMD_SEND_OBJECT:
-        usb_packet_copy(p, d->data + d->offset, dlen);
+        usb_packet_copy(p, d->data + d->data_offset, dlen);
         d->offset += dlen;
+        d->data_offset += dlen;
         if ((p->iov.size % 64) || !p->iov.size) {
             assert((s->dataset.size == 0xFFFFFFFF) ||
                    (s->dataset.size == d->offset));
 
+            if (d->length == MTP_WRITE_BUF_SZ) {
+                d->write_status = WRITE_END;
+            } else {
+                d->write_status = WRITE_START;
+            }
             usb_mtp_write_data(s);
             usb_mtp_data_free(s->data_out);
             s->data_out = NULL;
             return;
         }
-        if (d->offset == d->length) {
+        if (d->data_offset == d->length) {
             d->pending = true;
+            usb_mtp_write_data(s);
         }
         break;
     default:
Signature · 1 line
2.14.4
#3 lore raw
In reply to Bandan Das

Hi,

Quoted 7 lines

For larger files, not only do we keep reallocating to increase the mtp buffer size, the write also happens in one go. This does two things:

Write to file upto a certain data size we have received so far and second, reuse the buffer again instead of reallocating to a larger buffer size.

Tested with different file sizes on a Linux guest.

Doesn't apply to master, please rebase.

thanks,
Gerd