Skip to contentSkip to conversation

hw/arm/virt-acpi-build: Fix SMMUv3 ACPI integration

PATCH Superseded Eric Auger 4 participants 10 messages Nov 26, 2018 – Nov 29, 2018

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Eric Auger

author
#0 lore raw

PATCH 1/1 hw/arm/virt-acpi-build: Fix SMMUv3 ACPI integration

The AcpiIortSmmu3 misses 2 32b fields corresponding to the proximity domain and the device id mapping index.

Also let's report IO-coherent access is supported for translation table walks, descriptor fetches and queues by setting the COHACC override flag. Without that, we observe wrong command opcodes. The DT description also advertises the dma coherency.

Fixes a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")

---
 hw/arm/virt-acpi-build.c    | 1 +
 include/hw/acpi/acpi-defs.h | 8 ++++++++
 2 files changed, 9 insertions(+)
hw/arm/virt-acpi-build.c +1 -0
index 5785fb697c..aa177ba64d 100644
@@ -448,6 +448,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         smmu->mapping_count = cpu_to_le32(1);
         smmu->mapping_offset = cpu_to_le32(sizeof(*smmu));
         smmu->base_address = cpu_to_le64(vms->memmap[VIRT_SMMU].base);
+        smmu->flags = ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
         smmu->event_gsiv = cpu_to_le32(irq);
         smmu->pri_gsiv = cpu_to_le32(irq + 1);
         smmu->gerr_gsiv = cpu_to_le32(irq + 2);
include/hw/acpi/acpi-defs.h +8 -0
index af8e023968..c3ee1f517b 100644
@@ -628,6 +628,12 @@ struct AcpiIortItsGroup {
 } QEMU_PACKED;
 typedef struct AcpiIortItsGroup AcpiIortItsGroup;
 
+enum {
+    ACPI_IORT_SMMU_V3_COHACC_OVERRIDE = 1 << 0,
+    ACPI_IORT_SMMU_V3_HTTU_OVERRIDE   = 3 << 1,
+    ACPI_IORT_SMMU_V3_PXM_VALID       = 1 << 3
+};
+
 struct AcpiIortSmmu3 {
     ACPI_IORT_NODE_HEADER_DEF
     uint64_t base_address;
@@ -639,6 +645,8 @@ struct AcpiIortSmmu3 {
     uint32_t pri_gsiv;
     uint32_t gerr_gsiv;
     uint32_t sync_gsiv;
+    uint32_t pxm;
+    uint32_t id_mapping_index;
     AcpiIortIdMapping id_mapping_array[0];
 } QEMU_PACKED;
 typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
Signature · 1 line
2.17.2
Tested-by on v1 1/1
#1 lore raw

Hi Eric,

Quoted 9 lines

-----Original Message-----
From: Eric Auger [mailto:[email protected]]
Sent: 26 November 2018 15:46
To: [email protected]; [email protected]; qemu- [email protected]; [email protected]; [email protected]; [email protected]
Cc: Shameerali Kolothum Thodi <[email protected]>
Subject: [PATCH for-3.1] hw/arm/virt-acpi-build: Fix SMMUv3 ACPI integration

Quoted 8 lines

The AcpiIortSmmu3 misses 2 32b fields corresponding to the proximity domain and the device id mapping index.

Also let's report IO-coherent access is supported for translation table walks, descriptor fetches and queues by setting the COHACC override flag. Without that, we observe wrong command opcodes. The DT description also advertises the dma coherency.

Ah..that explains the "IDR0.COHACC overridden" and "CMD_SYNC timeout " entries in the boot log. Thanks for the fix and I can confirm this fixes the issue reported earlier[1].

FWIW:

Thanks,
Shameer

[1] https://patchwork.kernel.org/cover/10609261/

Quoted 52 lines

Fixes a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")

Reported-by Shameerali Kolothum Thodi

<[email protected]>

---
 hw/arm/virt-acpi-build.c    | 1 +
 include/hw/acpi/acpi-defs.h | 8 ++++++++
 2 files changed, 9 insertions(+)
hw/arm/virt-acpi-build.c +1 -0
index 5785fb697c..aa177ba64d 100644
@@ -448,6 +448,7 @@ build_iort(GArray *table_data, BIOSLinker *linker,
 VirtMachineState *vms)
         smmu->mapping_count = cpu_to_le32(1);
         smmu->mapping_offset = cpu_to_le32(sizeof(*smmu));
         smmu->base_address = cpu_to_le64(vms->memmap[VIRT_SMMU].base);
+        smmu->flags = ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
         smmu->event_gsiv = cpu_to_le32(irq);
         smmu->pri_gsiv = cpu_to_le32(irq + 1);
         smmu->gerr_gsiv = cpu_to_le32(irq + 2);
include/hw/acpi/acpi-defs.h +8 -1
index af8e023968..c3ee1f517b 100644
@@ -628,6 +628,12 @@ struct AcpiIortItsGroup {
 } QEMU_PACKED;
 typedef struct AcpiIortItsGroup AcpiIortItsGroup;
 
+enum {
+    ACPI_IORT_SMMU_V3_COHACC_OVERRIDE = 1 << 0,
+    ACPI_IORT_SMMU_V3_HTTU_OVERRIDE   = 3 << 1,
+    ACPI_IORT_SMMU_V3_PXM_VALID       = 1 << 3
+};
+
 struct AcpiIortSmmu3 {
     ACPI_IORT_NODE_HEADER_DEF
     uint64_t base_address;
@@ -639,6 +645,8 @@ struct AcpiIortSmmu3 {
     uint32_t pri_gsiv;
     uint32_t gerr_gsiv;
     uint32_t sync_gsiv;
+    uint32_t pxm;
+    uint32_t id_mapping_index;
     AcpiIortIdMapping id_mapping_array[0];
 } QEMU_PACKED;
 typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
--

2.17.2

author
#2 lore raw

Hi Shameer,

Quoted 20 lines · Shameerali Kolothum Thodi

Hi Eric,

Quoted 9 lines

-----Original Message-----
From: Eric Auger [mailto:[email protected]]
Sent: 26 November 2018 15:46
To: [email protected]; [email protected]; qemu- [email protected]; [email protected]; [email protected]; [email protected]
Cc: Shameerali Kolothum Thodi <[email protected]>
Subject: [PATCH for-3.1] hw/arm/virt-acpi-build: Fix SMMUv3 ACPI integration

Quoted 8 lines

The AcpiIortSmmu3 misses 2 32b fields corresponding to the proximity domain and the device id mapping index.

Also let's report IO-coherent access is supported for translation table walks, descriptor fetches and queues by setting the COHACC override flag. Without that, we observe wrong command opcodes. The DT description also advertises the dma coherency.

Quoted 6 lines

Ah..that explains the "IDR0.COHACC overridden" and "CMD_SYNC timeout " entries in the boot log. Thanks for the fix and I can confirm this fixes the issue reported earlier[1].

FWIW:

Many thanks!

Best Regards

Eric

Quoted 60 lines

Thanks,
Shameer

[1] https://patchwork.kernel.org/cover/10609261/

Quoted 52 lines

Fixes a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")

Reported-by Shameerali Kolothum Thodi

<[email protected]>

---
 hw/arm/virt-acpi-build.c    | 1 +
 include/hw/acpi/acpi-defs.h | 8 ++++++++
 2 files changed, 9 insertions(+)
hw/arm/virt-acpi-build.c +1 -0
index 5785fb697c..aa177ba64d 100644
@@ -448,6 +448,7 @@ build_iort(GArray *table_data, BIOSLinker *linker,
 VirtMachineState *vms)
         smmu->mapping_count = cpu_to_le32(1);
         smmu->mapping_offset = cpu_to_le32(sizeof(*smmu));
         smmu->base_address = cpu_to_le64(vms->memmap[VIRT_SMMU].base);
+        smmu->flags = ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
         smmu->event_gsiv = cpu_to_le32(irq);
         smmu->pri_gsiv = cpu_to_le32(irq + 1);
         smmu->gerr_gsiv = cpu_to_le32(irq + 2);
include/hw/acpi/acpi-defs.h +8 -1
index af8e023968..c3ee1f517b 100644
@@ -628,6 +628,12 @@ struct AcpiIortItsGroup {
 } QEMU_PACKED;
 typedef struct AcpiIortItsGroup AcpiIortItsGroup;
 
+enum {
+    ACPI_IORT_SMMU_V3_COHACC_OVERRIDE = 1 << 0,
+    ACPI_IORT_SMMU_V3_HTTU_OVERRIDE   = 3 << 1,
+    ACPI_IORT_SMMU_V3_PXM_VALID       = 1 << 3
+};
+
 struct AcpiIortSmmu3 {
     ACPI_IORT_NODE_HEADER_DEF
     uint64_t base_address;
@@ -639,6 +645,8 @@ struct AcpiIortSmmu3 {
     uint32_t pri_gsiv;
     uint32_t gerr_gsiv;
     uint32_t sync_gsiv;
+    uint32_t pxm;
+    uint32_t id_mapping_index;
     AcpiIortIdMapping id_mapping_array[0];
 } QEMU_PACKED;
 typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
--

2.17.2

author
#3 lore raw
In reply to Eric Auger

Hi Shannon,

Quoted 2 lines · Eric Auger

The AcpiIortSmmu3 misses 2 32b fields corresponding to the proximity domain and the device id mapping index.

I fail to understand how we currently track the evolutions of the IORT structures:

Looking at the smmuv3 node in kernel include/acpi/actbl2.h

- the following fields were added in c944230064eb ACPICA: iasl: Update to IORT SMMUv3 disassembling (1 year, 4 months ago)

	u8 pxm;
	u8 reserved1;
	u16 reserved2;

- id_mapping_index was added in 4c106aa411ee ACPICA: iasl: Add SMMUv3 device ID mapping index support (1 year ago)
- current u32 pxm was introduced in d87be0438e3d ACPICA: IORT: Update for revision D (6 months ago)

I would have expected each of those evolutions to be tagged by a revision increment in the acpi_iort_node.revision field but this is not done. Also I fail to see any enum for encoding the revision.

The smmuv3 struct that has been exposed until now corresponds to Rev C
https://lists.linuxfoundation.org/pipermail/iommu/2017-May/022000.html
(0c2021c047ba ACPICA: IORT: Update SMMU models for revision C (1 year, 4 months ago)

Also I noticed that in rev D, new fields were added in struct acpi_iort_root_complex. We miss them at the moment in the IORT description.

How does the guest kernel know which revision of the IORT is exposed? What do I miss?

Thanks

Eric

Quoted 55 lines

Also let's report IO-coherent access is supported for translation table walks, descriptor fetches and queues by setting the COHACC override flag. Without that, we observe wrong command opcodes. The DT description also advertises the dma coherency.

Fixes a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")

---
 hw/arm/virt-acpi-build.c    | 1 +
 include/hw/acpi/acpi-defs.h | 8 ++++++++
 2 files changed, 9 insertions(+)
hw/arm/virt-acpi-build.c +1 -0
index 5785fb697c..aa177ba64d 100644
@@ -448,6 +448,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         smmu->mapping_count = cpu_to_le32(1);
         smmu->mapping_offset = cpu_to_le32(sizeof(*smmu));
         smmu->base_address = cpu_to_le64(vms->memmap[VIRT_SMMU].base);
+        smmu->flags = ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
         smmu->event_gsiv = cpu_to_le32(irq);
         smmu->pri_gsiv = cpu_to_le32(irq + 1);
         smmu->gerr_gsiv = cpu_to_le32(irq + 2);
include/hw/acpi/acpi-defs.h +8 -0
index af8e023968..c3ee1f517b 100644
@@ -628,6 +628,12 @@ struct AcpiIortItsGroup {
 } QEMU_PACKED;
 typedef struct AcpiIortItsGroup AcpiIortItsGroup;
 
+enum {
+    ACPI_IORT_SMMU_V3_COHACC_OVERRIDE = 1 << 0,
+    ACPI_IORT_SMMU_V3_HTTU_OVERRIDE   = 3 << 1,
+    ACPI_IORT_SMMU_V3_PXM_VALID       = 1 << 3
+};
+
 struct AcpiIortSmmu3 {
     ACPI_IORT_NODE_HEADER_DEF
     uint64_t base_address;
@@ -639,6 +645,8 @@ struct AcpiIortSmmu3 {
     uint32_t pri_gsiv;
     uint32_t gerr_gsiv;
     uint32_t sync_gsiv;
+    uint32_t pxm;
+    uint32_t id_mapping_index;
     AcpiIortIdMapping id_mapping_array[0];
 } QEMU_PACKED;
 typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
#4 lore raw
Quoted 29 lines · Auger Eric

Hi Shannon,

Quoted 2 lines · Eric Auger

The AcpiIortSmmu3 misses 2 32b fields corresponding to the proximity domain and the device id mapping index.

I fail to understand how we currently track the evolutions of the IORT structures:

Looking at the smmuv3 node in kernel include/acpi/actbl2.h

- the following fields were added in c944230064eb ACPICA: iasl: Update to IORT SMMUv3 disassembling (1 year, 4 months ago)

	u8 pxm;
	u8 reserved1;
	u16 reserved2;

- id_mapping_index was added in 4c106aa411ee ACPICA: iasl: Add SMMUv3 device ID mapping index support (1 year ago)
- current u32 pxm was introduced in d87be0438e3d ACPICA: IORT: Update for revision D (6 months ago)

I would have expected each of those evolutions to be tagged by a revision increment in the acpi_iort_node.revision field but this is not done. Also I fail to see any enum for encoding the revision.

The smmuv3 struct that has been exposed until now corresponds to Rev C
https://lists.linuxfoundation.org/pipermail/iommu/2017-May/022000.html
(0c2021c047ba ACPICA: IORT: Update SMMU models for revision C (1 year, 4 months ago)

Quoted 6 lines

Also I noticed that in rev D, new fields were added in struct acpi_iort_root_complex. We miss them at the moment in the IORT description.

How does the guest kernel know which revision of the IORT is exposed? What do I miss?

Look at the kernel code in iort.c it checks if the flags field has set ACPI_IORT_SMMU_V3_PXM_VALID bit.

	if (smmu->flags & ACPI_IORT_SMMU_V3_PXM_VALID) {
		set_dev_node(dev, acpi_map_pxm_to_node(smmu->pxm));
		pr_info("SMMU-v3[%llx] Mapped to Proximity domain %d\n",
			smmu->base_address,
			smmu->pxm);
	}

But it doesn't check the revision I think the reason is that revision 1 & 2 just use the next reserved fields. No matter u8 or u32, kernel driver get the same value.

The code handling id_mapping_index does check the revision.

static int iort_get_id_mapping_index(struct acpi_iort_node *node)

{
	struct acpi_iort_smmu_v3 *smmu;

	switch (node->type) {
	case ACPI_IORT_NODE_SMMU_V3:
		/*
		 * SMMUv3 dev ID mapping index was introduced in revision 1
		 * table, not available in revision 0
		 */
		if (node->revision < 1)
			return -EINVAL;
Quoted 40 lines

Thanks

Eric

Quoted 36 lines

Also let's report IO-coherent access is supported for translation table walks, descriptor fetches and queues by setting the COHACC override flag. Without that, we observe wrong command opcodes. The DT description also advertises the dma coherency.

Fixes a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")

---
  hw/arm/virt-acpi-build.c    | 1 +
  include/hw/acpi/acpi-defs.h | 8 ++++++++
  2 files changed, 9 insertions(+)
hw/arm/virt-acpi-build.c +1 -0
index 5785fb697c..aa177ba64d 100644
@@ -448,6 +448,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
          smmu->mapping_count = cpu_to_le32(1);
          smmu->mapping_offset = cpu_to_le32(sizeof(*smmu));
          smmu->base_address = cpu_to_le64(vms->memmap[VIRT_SMMU].base);
+        smmu->flags = ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
          smmu->event_gsiv = cpu_to_le32(irq);
          smmu->pri_gsiv = cpu_to_le32(irq + 1);
          smmu->gerr_gsiv = cpu_to_le32(irq + 2);
include/hw/acpi/acpi-defs.h +0 -0
index af8e023968..c3ee1f517b 100644
@@ -628,6 +628,12 @@ struct AcpiIortItsGroup {
  } QEMU_PACKED;
  typedef struct AcpiIortItsGroup AcpiIortItsGroup;
 
Quoted 14 lines
Quoted 10 lines
include/hw/acpi/acpi-defs.h +6 -0
+enum {
+    ACPI_IORT_SMMU_V3_COHACC_OVERRIDE = 1 << 0,
+    ACPI_IORT_SMMU_V3_HTTU_OVERRIDE   = 3 << 1,
+    ACPI_IORT_SMMU_V3_PXM_VALID       = 1 << 3
+};
+
  struct AcpiIortSmmu3 {
      ACPI_IORT_NODE_HEADER_DEF
      uint64_t base_address;

include/hw/acpi/acpi-defs.h struct AcpiIortSmmu3 { · line 648

Quoted 4 lines
include/hw/acpi/acpi-defs.h +1 -0
@@ -639,6 +645,8 @@ struct AcpiIortSmmu3 {
      uint32_t pri_gsiv;
      uint32_t gerr_gsiv;
      uint32_t sync_gsiv;
+    uint32_t pxm;

So if we use this field ,we need to set the flags with ACPI_IORT_SMMU_V3_PXM_VALID.

Quoted 1 line

include/hw/acpi/acpi-defs.h struct AcpiIortSmmu3 { · line 649

Quoted 1 line
include/hw/acpi/acpi-defs.h +1 -0
+    uint32_t id_mapping_index;

And if we use this field, it needs to set the revision to at least 1.

Thanks,
Shannon

Quoted 4 lines
Quoted 4 lines
include/hw/acpi/acpi-defs.h +0 -0
      AcpiIortIdMapping id_mapping_array[0];
  } QEMU_PACKED;
  typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
author
#5 lore raw

Hi Shannon,

Quoted 126 lines · Shannon Zhao
Quoted 29 lines · Auger Eric

Hi Shannon,

Quoted 2 lines · Eric Auger

The AcpiIortSmmu3 misses 2 32b fields corresponding to the proximity domain and the device id mapping index.

I fail to understand how we currently track the evolutions of the IORT structures:

Looking at the smmuv3 node in kernel include/acpi/actbl2.h

- the following fields were added in c944230064eb  ACPICA: iasl: Update to IORT SMMUv3 disassembling (1 year, 4 months ago)
    u8 pxm;
    u8 reserved1;
    u16 reserved2;
- id_mapping_index was added in 4c106aa411ee  ACPICA: iasl: Add SMMUv3 device ID mapping index support (1 year ago)
- current u32 pxm was introduced in d87be0438e3d  ACPICA: IORT: Update for revision D (6 months ago)

I would have expected each of those evolutions to be tagged by a revision increment in the acpi_iort_node.revision field but this is not done. Also I fail to see any enum for encoding the revision.

The smmuv3 struct that has been exposed until now corresponds to Rev C
https://lists.linuxfoundation.org/pipermail/iommu/2017-May/022000.html
(0c2021c047ba  ACPICA: IORT: Update SMMU models for revision C (1 year, 4 months ago)

Quoted 7 lines

Also I noticed that in rev D, new fields were added in struct acpi_iort_root_complex. We miss them at the moment in the IORT description.

How does the guest kernel know which revision of the IORT is exposed? What do I miss?

Look at the kernel code in iort.c it checks if the flags field has set ACPI_IORT_SMMU_V3_PXM_VALID bit.

    if (smmu->flags & ACPI_IORT_SMMU_V3_PXM_VALID) { set_dev_node(dev, acpi_map_pxm_to_node(smmu->pxm)); pr_info("SMMU-v3[%llx] Mapped to Proximity domain %d\n", smmu->base_address,
            smmu->pxm);
    }

But it doesn't check the revision I think the reason is that revision 1 & 2 just use the next reserved fields. No matter u8 or u32, kernel driver get the same value.

The code handling id_mapping_index does check the revision.

static int iort_get_id_mapping_index(struct acpi_iort_node *node) {
    struct acpi_iort_smmu_v3 *smmu;

    switch (node->type) {
    case ACPI_IORT_NODE_SMMU_V3:
        /*
         * SMMUv3 dev ID mapping index was introduced in revision 1
         * table, not available in revision 0
         */
        if (node->revision < 1)
            return -EINVAL;

Quoted 48 lines

Thanks

Eric

Quoted 44 lines

Also let's report IO-coherent access is supported for translation table walks, descriptor fetches and queues by setting the COHACC override flag. Without that, we observe wrong command opcodes. The DT description also advertises the dma coherency.

Fixes a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")

Reported-by Shameerali Kolothum Thodi

<[email protected]>
---
  hw/arm/virt-acpi-build.c    | 1 +
  include/hw/acpi/acpi-defs.h | 8 ++++++++

  2 files changed, 9 insertions(+)
hw/arm/virt-acpi-build.c +1 -0
index 5785fb697c..aa177ba64d 100644
@@ -448,6 +448,7 @@ build_iort(GArray *table_data, BIOSLinker
 *linker, VirtMachineState *vms)
           smmu->mapping_count = cpu_to_le32(1);
           smmu->mapping_offset = cpu_to_le32(sizeof(*smmu));
           smmu->base_address = cpu_to_le64(vms->memmap[VIRT_SMMU].base);
+        smmu->flags = ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
           smmu->event_gsiv = cpu_to_le32(irq);
           smmu->pri_gsiv = cpu_to_le32(irq + 1);

          smmu->gerr_gsiv = cpu_to_le32(irq + 2);

include/hw/acpi/acpi-defs.h +5 -0
index af8e023968..c3ee1f517b 100644
@@ -628,6 +628,12 @@ struct AcpiIortItsGroup {
   } QEMU_PACKED;
   typedef struct AcpiIortItsGroup AcpiIortItsGroup;
   +enum {
+    ACPI_IORT_SMMU_V3_COHACC_OVERRIDE = 1 << 0,
+    ACPI_IORT_SMMU_V3_HTTU_OVERRIDE   = 3 << 1,
+    ACPI_IORT_SMMU_V3_PXM_VALID       = 1 << 3
+};
+
Quoted 8 lines

include/hw/acpi/acpi-defs.h struct AcpiIortSmmu3 { · line 648

Quoted 8 lines
include/hw/acpi/acpi-defs.h +0 -0
   struct AcpiIortSmmu3 {

      ACPI_IORT_NODE_HEADER_DEF
      uint64_t base_address;

include/hw/acpi/acpi-defs.h +1 -0
@@ -639,6 +645,8 @@ struct AcpiIortSmmu3 {
       uint32_t pri_gsiv;
       uint32_t gerr_gsiv;
       uint32_t sync_gsiv;
+    uint32_t pxm;

So if we use this field ,we need to set the flags with ACPI_IORT_SMMU_V3_PXM_VALID

Quoted 2 lines
Quoted 1 line

include/hw/acpi/acpi-defs.h struct AcpiIortSmmu3 { · line 649

Quoted 1 line
include/hw/acpi/acpi-defs.h +1 -0
+    uint32_t id_mapping_index;

And if we use this field, it needs to set the revision to at least 1.

But is it harmful to add those fields in the struct as this patch does?

- in our case ACPI_IORT_SMMU_V3_PXM_VALID flag is not set so the field value is ignored according to the spec and arm_smmu_v3_set_proximity() will not do anything.

- SMMU control interrupts are all GSIV based so spec says that deviceID index is ignored.

So eventually the fact the struct size is changing over the revisions does not look a problem because the node length is part of the struct and the offset to the ID array also is part of the structure.

So I could have left the structure as before (because we don't use the functionalities associated to those fields). But on the other hand it's good to upgrade the struct according to Rev D now.

So I think the patch is correct, isn't?

Thanks

Eric

Quoted 7 lines

Thanks,
Shannon

Quoted 4 lines
Quoted 4 lines
include/hw/acpi/acpi-defs.h +0 -0
       AcpiIortIdMapping id_mapping_array[0];
   } QEMU_PACKED;
   typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
#6 lore raw
Quoted 25 lines · Auger Eric
Quoted 10 lines
Quoted 8 lines

include/hw/acpi/acpi-defs.h struct AcpiIortSmmu3 { · line 648

Quoted 8 lines

  struct AcpiIortSmmu3 {
      ACPI_IORT_NODE_HEADER_DEF
      uint64_t base_address;

include/hw/acpi/acpi-defs.h +1 -0
@@ -639,6 +645,8 @@ struct AcpiIortSmmu3 {
       uint32_t pri_gsiv;
       uint32_t gerr_gsiv;
       uint32_t sync_gsiv;
+    uint32_t pxm;

So if we use this field ,we need to set the flags with ACPI_IORT_SMMU_V3_PXM_VALID

Quoted 2 lines
Quoted 1 line

include/hw/acpi/acpi-defs.h struct AcpiIortSmmu3 { · line 649

Quoted 1 line
include/hw/acpi/acpi-defs.h +1 -0
+    uint32_t id_mapping_index;

And if we use this field, it needs to set the revision to at least 1.

But is it harmful to add those fields in the struct as this patch does?

- in our case ACPI_IORT_SMMU_V3_PXM_VALID flag is not set so the field value is ignored according to the spec and arm_smmu_v3_set_proximity() will not do anything.

- SMMU control interrupts are all GSIV based so spec says that deviceID index is ignored.

So eventually the fact the struct size is changing over the revisions does not look a problem because the node length is part of the struct and the offset to the ID array also is part of the structure.

Quoted 5 lines

So I could have left the structure as before (because we don't use the functionalities associated to those fields). But on the other hand it's good to upgrade the struct according to Rev D now.

So I think the patch is correct, isn't?

Yes, I think it's not harmful but it would be better to add some comments to explain why we don't increase the revision number ATM.

Thanks,
Shannon

author
#7 lore raw

Hi Shannon,

Quoted 28 lines · Shannon Zhao
Quoted 25 lines · Auger Eric
Quoted 10 lines
Quoted 8 lines

include/hw/acpi/acpi-defs.h struct AcpiIortSmmu3 { · line 648

Quoted 8 lines

   struct AcpiIortSmmu3 {
       ACPI_IORT_NODE_HEADER_DEF
       uint64_t base_address;

include/hw/acpi/acpi-defs.h +1 -0
@@ -639,6 +645,8 @@ struct AcpiIortSmmu3 {
        uint32_t pri_gsiv;
        uint32_t gerr_gsiv;
        uint32_t sync_gsiv;
+    uint32_t pxm;

So if we use this field ,we need to set the flags with ACPI_IORT_SMMU_V3_PXM_VALID

Quoted 2 lines
Quoted 1 line

include/hw/acpi/acpi-defs.h struct AcpiIortSmmu3 { · line 649

Quoted 1 line
include/hw/acpi/acpi-defs.h +1 -0
+    uint32_t id_mapping_index;

And if we use this field, it needs to set the revision to at least 1.

But is it harmful to add those fields in the struct as this patch does?

- in our case ACPI_IORT_SMMU_V3_PXM_VALID flag is not set so the field value is ignored according to the spec and arm_smmu_v3_set_proximity() will not do anything.

- SMMU control interrupts are all GSIV based so spec says that deviceID index is ignored.

So eventually the fact the struct size is changing over the revisions does not look a problem because the node length is part of the struct and the offset to the ID array also is part of the structure.

Quoted 7 lines
Quoted 5 lines

So I could have left the structure as before (because we don't use the functionalities associated to those fields). But on the other hand it's good to upgrade the struct according to Rev D now.

So I think the patch is correct, isn't?

Yes, I think it's not harmful but it would be better to add some comments to explain why we don't increase the revision number ATM.

OK thank you for your input. I will repost for 3.2 and will upgrade the table structs and their associated revision fields.

Thanks

Eric

Quoted 4 lines

Thanks,
Shannon

#8 lore raw
In reply to Eric Auger
Quoted 10 lines · Eric Auger

The AcpiIortSmmu3 misses 2 32b fields corresponding to the proximity domain and the device id mapping index.

Also let's report IO-coherent access is supported for translation table walks, descriptor fetches and queues by setting the COHACC override flag. Without that, we observe wrong command opcodes. The DT description also advertises the dma coherency.

Quoted 4 lines

Fixes a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")

Hi; it looks (from looking at the code) like this isn't a regression from 3.0 -- is that right?

I think this fix has missed rc3 (discussion seems to be ongoing and it needs more time on-list for review), which means it's likely to miss the 3.1 release. So at the moment I'm expecting it to go into 4.0. (Maybe if we need an rc4 for some other reason we might be able to put it in.)

thanks
-- PMM

author
#9 lore raw

Hi Peter,

Quoted 11 lines · Peter Maydell
Quoted 10 lines · Eric Auger

The AcpiIortSmmu3 misses 2 32b fields corresponding to the proximity domain and the device id mapping index.

Also let's report IO-coherent access is supported for translation table walks, descriptor fetches and queues by setting the COHACC override flag. Without that, we observe wrong command opcodes. The DT description also advertises the dma coherency.

Quoted 7 lines
Quoted 4 lines

Fixes a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")

Hi; it looks (from looking at the code) like this isn't a regression from 3.0 -- is that right?

Correct, the lack of COHACC override flag has been there from the very beginning.

Quoted 6 lines

I think this fix has missed rc3 (discussion seems to be ongoing and it needs more time on-list for review), which means it's likely to miss the 3.1 release. So at the moment I'm expecting it to go into 4.0. (Maybe if we need an rc4 for some other reason we might be able to put it in.)

OK

Thanks

Eric

Quoted 4 lines

thanks
-- PMM