Skip to contentSkip to conversation

Add a standard authorization framework

PATCH Superseded Daniel P. Berrangé 3 participants 18 messages Nov 30, 2018 – Dec 6, 2018

Subsystems (2)

v7 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v7 cover Add a standard authorization framework

An update to

v2: https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg04469.html
v3: https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg05660.html
v4: https://lists.gnu.org/archive/html/qemu-devel/2018-08/msg02961.html
v5: https://lists.gnu.org/archive/html/qemu-devel/2018-10/msg01613.html
v6: https://lists.gnu.org/archive/html/qemu-devel/2018-10/msg04435.html

The current network services now support encryption via TLS and in some cases support authentication via SASL. In cases where SASL is not available, x509 client certificates can be used as a crude authorization scheme, but using a sub-CA and controlling who you give certs to. In general this is not very flexible though, so this series introduces a new standard authorization framework.

It comes with four initial authorization mechanisms

- Simple - an exact username match. This is useful when there is exactly one user that is known to connect. For example when live migrating from one QEMU to another with TLS, libvirt would use the simple scheme to whitelist the TLS cert of the source QEMU.

- List - an full access control list, with optional regex matching. This is more flexible and is used to provide 100% backcompat with the existing HMP ACL commands. The caveat is that we can't create these via the CLI -object arg yet.

- ListFile - the same as List, but with the rules stored in JSON format in an external file. This avoids the -object limitation while also allowing the admin to change list entries on the file. QEMU uses inotify to notice these changes and auto-reload the file contents. This is likely a good default choice for most network services, if the "simple" mechanism isn't sufficient.

- PAM - delegate the username lookup to a PAM module, which opens the door to many options including things like SQL/LDAP lookups.

A later series that follows will integrate this framework into the VNC, NBD, migration, and character device servers.

Changed in v6:

- Change file monitor object to allow multiple instances instead of being a singleton
- Use stubs when inotify is not available
- Use GArray for managing watches
- Report errno when failing to read from inotify
- Check for closed inotify FD before reading
- Monitor file attribute changes to detect chmod/chown/etc
- Unregister event loop FD handler when watches are removed
- Fix mutex unlock call when removing watches
- Remove file monitor watch when free'ing MTP object
- Rename MTP watchfd field to watchid
- Free file monitor when deleting MTP device
- Use error_report instead of fprintf for MTP errors
- Use GPattern instead of fnmatch
- Use enum _str() helper functions
- Add unit/functional test for inotify file monitor
- Add unit test for simple authz impl
- Add unit test for list file authz impl
- Add unit test for PAM authz impl

Changed in v6:

- Fix consistency of object variable names
- Fix command line example quoting
- Use 'false' not '0' for bool return values
- Remove empty 'complete' methods
- Fix leak of rules in finalizer
- Fix missing {} around conditional
- Refactor rule refresh to use goto & invert conditional

Changed in v5:

- Rebase to latest git master

Changed in v4:

- Rebase to latest git master

Changed in v3:

- Added docs for object types in qemu-options.hx
- Added example CLI syntax in header files
- Improved commit messages

Changed in v2:

- Switch to a global shared instance of the file monitor so only a single inotify file descriptor is required

- Require all watches to be registered against directories. File watches are useless in Linux, since they are tied to inodes, and so stop working when editors save by doing a tmpfile + rename dance.

- Change auth list impl to use a directory based watch instead of filename

- Put MTP const-ness fixes in separate patch

- Split QOM change off into separate patch

- Fix conditionals on Win32 build

Daniel P. Berrangé (11):
util: add helper APIs for dealing with inotify in portable manner
qom: don't require user creatable objects to be registered hw/usb: don't set IN_ISDIR for inotify watch in MTP driver hw/usb: fix const-ness for string params in MTP driver hw/usb: switch MTP to use new inotify APIs
authz: add QAuthZ object as an authorization base class
authz: add QAuthZSimple object type for easy whitelist auth checks
authz: add QAuthZList object type for an access control list
authz: add QAuthZListFile object type for a file access control list
authz: add QAuthZPAM object type for authorizing using PAM
authz: delete existing ACL implementation

 .gitignore                     |   4 +
 MAINTAINERS                    |  15 +
 Makefile                       |  17 +-
 Makefile.objs                  |  12 +-
 Makefile.target                |   2 +
 authz/Makefile.objs            |   7 +
 authz/base.c                   |  82 ++++
 authz/list.c                   | 285 ++++++++++++++
 authz/listfile.c               | 283 ++++++++++++++
 authz/pamacct.c                | 149 +++++++
 authz/simple.c                 | 115 ++++++
 authz/trace-events             |  18 +
 configure                      |  37 ++
 crypto/tlssession.c            |  35 +-
 crypto/trace-events            |   2 +-
 hw/usb/dev-mtp.c               | 278 ++++++-------
 hw/usb/trace-events            |   2 +-
 include/authz/base.h           | 112 ++++++
 include/authz/list.h           | 106 +++++
 include/authz/listfile.h       | 111 ++++++
 include/authz/pamacct.h        | 100 +++++
 include/authz/simple.h         |  84 ++++
 include/qemu/acl.h             |  66 ----
 include/qemu/filemonitor.h     | 128 ++++++
 monitor.c                      | 185 ++++++---
 qapi/authz.json                |  58 +++
 qapi/qapi-schema.json          |   1 +
 qemu-options.hx                | 105 +++++
 qom/object.c                   |  12 +-
 qom/object_interfaces.c        |  16 +-
 tests/Makefile.include         |  16 +-
 tests/test-authz-list.c        | 159 ++++++++
 tests/test-authz-listfile.c    | 195 ++++++++++
 tests/test-authz-pam.c         | 124 ++++++
 tests/test-authz-simple.c      |  50 +++
 tests/test-crypto-tlssession.c |  15 +-
 tests/test-io-channel-tls.c    |  16 +-
 tests/test-util-filemonitor.c  | 685 +++++++++++++++++++++++++++++++++
 ui/vnc-auth-sasl.c             |  23 +-
 ui/vnc-auth-sasl.h             |   5 +-
 ui/vnc-auth-vencrypt.c         |   2 +-
 ui/vnc-ws.c                    |   2 +-
 ui/vnc.c                       |  37 +-
 ui/vnc.h                       |   4 +-
 util/Makefile.objs             |   4 +-
 util/acl.c                     | 179 ---------
 util/filemonitor-inotify.c     | 338 ++++++++++++++++
 util/filemonitor-stub.c        |  59 +++
 util/trace-events              |   9 +
 49 files changed, 3803 insertions(+), 546 deletions(-)
 create mode 100644 authz/Makefile.objs
 create mode 100644 authz/base.c
 create mode 100644 authz/list.c
 create mode 100644 authz/listfile.c
 create mode 100644 authz/pamacct.c
 create mode 100644 authz/simple.c
 create mode 100644 authz/trace-events
 create mode 100644 include/authz/base.h
 create mode 100644 include/authz/list.h
 create mode 100644 include/authz/listfile.h
 create mode 100644 include/authz/pamacct.h
 create mode 100644 include/authz/simple.h
 delete mode 100644 include/qemu/acl.h
 create mode 100644 include/qemu/filemonitor.h
 create mode 100644 qapi/authz.json
 create mode 100644 tests/test-authz-list.c
 create mode 100644 tests/test-authz-listfile.c
 create mode 100644 tests/test-authz-pam.c
 create mode 100644 tests/test-authz-simple.c
 create mode 100644 tests/test-util-filemonitor.c
 delete mode 100644 util/acl.c
 create mode 100644 util/filemonitor-inotify.c
 create mode 100644 util/filemonitor-stub.c
Signature · 1 line
2.19.2
#2 lore raw

PATCH v7 2/11 qom: don't require user creatable objects to be registered

When an object is in turn owned by another user object, it is not desirable to expose this in the QOM object hierarchy. It is just an internal implementation detail, we should be free to change without exposure to apps managing QEMU.

---
 qom/object.c            | 12 ++++++++----
 qom/object_interfaces.c | 16 ++++++++++------
 2 files changed, 18 insertions(+), 10 deletions(-)
qom/object.c +8 -4
index 547dcf97c3..f20f0c45a7 100644
@@ -607,15 +607,19 @@ Object *object_new_with_propv(const char *typename,
         goto error;
     }
 
-    object_property_add_child(parent, id, obj, &local_err);
-    if (local_err) {
-        goto error;
+    if (id != NULL) {
+        object_property_add_child(parent, id, obj, &local_err);
+        if (local_err) {
+            goto error;
+        }
     }
 
     if (object_dynamic_cast(obj, TYPE_USER_CREATABLE)) {
         user_creatable_complete(obj, &local_err);
         if (local_err) {
-            object_unparent(obj);
+            if (id != NULL) {
+                object_unparent(obj);
+            }
             goto error;
         }
     }
qom/object_interfaces.c +10 -6
index 97b79b48bb..b5b95e067a 100644
@@ -83,16 +83,20 @@ Object *user_creatable_add_type(const char *type, const char *id,
         goto out;
     }
 
-    object_property_add_child(object_get_objects_root(),
-                              id, obj, &local_err);
-    if (local_err) {
-        goto out;
+    if (id != NULL) {
+        object_property_add_child(object_get_objects_root(),
+                                  id, obj, &local_err);
+        if (local_err) {
+            goto out;
+        }
     }
 
     user_creatable_complete(obj, &local_err);
     if (local_err) {
-        object_property_del(object_get_objects_root(),
-                            id, &error_abort);
+        if (id != NULL) {
+            object_property_del(object_get_objects_root(),
+                                id, &error_abort);
+        }
         goto out;
     }
 out:
Signature · 1 line
2.19.2
#3 lore raw

PATCH v7 3/11 hw/usb: don't set IN_ISDIR for inotify watch in MTP driver

In reply to Daniel P. Berrangé

IN_ISDIR is not a bit that one can request when registering a watch with inotify_add_watch. Rather it is a bit that is set automatically when reading events from the kernel.

---
 hw/usb/dev-mtp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
hw/usb/dev-mtp.c +1 -2
index 00a3691bae..f026419e47 100644
@@ -642,8 +642,7 @@ static void usb_mtp_inotify_cleanup(MTPState *s)
 
 static int usb_mtp_add_watch(int inotifyfd, char *path)
 {
-    uint32_t mask = IN_CREATE | IN_DELETE | IN_MODIFY |
-        IN_ISDIR;
+    uint32_t mask = IN_CREATE | IN_DELETE | IN_MODIFY;
 
     return inotify_add_watch(inotifyfd, path, mask);
 }
Signature · 1 line
2.19.2
#1 lore raw

PATCH v7 1/11 util: add helper APIs for dealing with inotify in portable manner

In reply to Daniel P. Berrangé

The inotify userspace API for reading events is quite horrible, so it is useful to wrap it in a more friendly API to avoid duplicating code across many users in QEMU. Wrapping it also allows introduction of a platform portability layer, so that we can add impls for non-Linux based equivalents in future.

---
 MAINTAINERS                   |   7 +
 Makefile.objs                 |   2 +-
 include/qemu/filemonitor.h    | 128 +++++++
 tests/Makefile.include        |   3 +
 tests/test-util-filemonitor.c | 685 ++++++++++++++++++++++++++++++++++
 util/Makefile.objs            |   3 +
 util/filemonitor-inotify.c    | 338 +++++++++++++++++
 util/filemonitor-stub.c       |  59 +++
 util/trace-events             |   9 +
 9 files changed, 1233 insertions(+), 1 deletion(-)
 create mode 100644 include/qemu/filemonitor.h
 create mode 100644 tests/test-util-filemonitor.c
 create mode 100644 util/filemonitor-inotify.c
 create mode 100644 util/filemonitor-stub.c
MAINTAINERS +7 -0
index 63effdc473..2e550622f9 100644
@@ -2016,6 +2016,13 @@ F: include/qemu/sockets.h
 F: util/qemu-sockets.c
 F: qapi/sockets.json
 
+File monitor
+M: Daniel P. Berrange <[email protected]>
+S: Odd fixes
+F: util/filemonitor*.c
+F: include/qemu/filemonitor.h
+F: tests/test-util-filemonitor.c
+
 Throttling infrastructure
 M: Alberto Garcia <[email protected]>
 S: Supported
Makefile.objs +1 -1
index 1e1ff387d7..7125d06293 100644
@@ -1,6 +1,6 @@
 #######################################################################
 # Common libraries for tools and emulators
-stub-obj-y = stubs/ crypto/
+stub-obj-y = stubs/ util/ crypto/
 util-obj-y = util/ qobject/ qapi/
 util-obj-y += qapi/qapi-builtin-types.o
 util-obj-y += qapi/qapi-types.o
include/qemu/filemonitor.h new file +128 -0

128 lines not on this page · raw message

tests/Makefile.include +3 -0
index fb0b449c02..e339287021 100644
@@ -110,6 +110,7 @@ ifneq (,$(findstring qemu-ga,$(TOOLS)))
 check-unit-$(CONFIG_LINUX) += tests/test-qga$(EXESUF)
 endif
 check-unit-y += tests/test-timed-average$(EXESUF)
+check-unit-$(CONFIG_INOTIFY1) += tests/test-util-filemonitor$(EXESUF)
 check-unit-y += tests/test-util-sockets$(EXESUF)
 check-unit-y += tests/test-io-task$(EXESUF)
 check-unit-y += tests/test-io-channel-socket$(EXESUF)
@@ -636,6 +637,8 @@ tests/test-crypto-tlssession$(EXESUF): tests/test-crypto-tlssession.o \
 	tests/crypto-tls-x509-helpers.o tests/pkix_asn1_tab.o \
 	tests/crypto-tls-psk-helpers.o \
         $(test-crypto-obj-y)
+tests/test-util-filemonitor$(EXESUF): tests/test-util-filemonitor.o \
+	$(test-util-obj-y)
 tests/test-util-sockets$(EXESUF): tests/test-util-sockets.o \
 	tests/socket-helpers.o $(test-util-obj-y)
 tests/test-io-task$(EXESUF): tests/test-io-task.o $(test-io-obj-y)
tests/test-util-filemonitor.c new file +685 -0

685 lines not on this page · raw message

util/Makefile.objs +3 -0
index 0820923c18..c1dd746902 100644
@@ -50,5 +50,8 @@ util-obj-y += range.o
 util-obj-y += stats64.o
 util-obj-y += systemd.o
 util-obj-y += iova-tree.o
+util-obj-$(CONFIG_INOTIFY1) += filemonitor-inotify.o
 util-obj-$(CONFIG_LINUX) += vfio-helpers.o
 util-obj-$(CONFIG_OPENGL) += drm.o
+
+stub-obj-y += filemonitor-stub.o
util/filemonitor-inotify.c new file +338 -0

338 lines not on this page · raw message

util/filemonitor-stub.c new file +59 -0

59 lines not on this page · raw message

util/trace-events +9 -0
index 79569b7fdf..ff19b253e2 100644
@@ -21,6 +21,15 @@ buffer_move_empty(const char *buf, size_t len, const char *from) "%s: %zd bytes
 buffer_move(const char *buf, size_t len, const char *from) "%s: %zd bytes from %s"
 buffer_free(const char *buf, size_t len) "%s: capacity %zd"
 
+# util/filemonitor.c
+qemu_file_monitor_add_watch(void *mon, const char *dirpath, const char *filename, void *cb, void *opaque, int id) "File monitor %p add watch dir='%s' file='%s' cb=%p opaque=%p id=%u"
+qemu_file_monitor_remove_watch(void *mon, const char *dirpath, int id) "File monitor %p remove watch dir='%s' id=%u"
+qemu_file_monitor_new(void *mon, int fd) "File monitor %p created fd=%d"
+qemu_file_monitor_enable_watch(void *mon, const char *dirpath, int id) "File monitor %p enable watch dir='%s' id=%u"
+qemu_file_monitor_disable_watch(void *mon, const char *dirpath, int id) "Fle monitor %p disable watch dir='%s' id=%u"
+qemu_file_monitor_event(void *mon, const char *dirpath, const char *filename, int mask, unsigned int id) "File monitor %p event dir='%s' file='%s' mask=0x%x id=%u"
+qemu_file_monitor_dispatch(void *mon, const char *dirpath, const char *filename, int ev, void *cb, void *opaque, unsigned int id) "File monitor %p dispatch dir='%s' file='%s' ev=%d cb=%p opaque=%p id=%u"
+
 # util/qemu-coroutine.c
 qemu_aio_coroutine_enter(void *ctx, void *from, void *to, void *opaque) "ctx %p from %p to %p opaque %p"
 qemu_coroutine_yield(void *from, void *to) "from %p to %p"
Signature · 1 line
2.19.2
#4 lore raw

PATCH v7 4/11 hw/usb: fix const-ness for string params in MTP driver

In reply to Daniel P. Berrangé

Various functions accepting 'char *' string parameters were missing 'const' qualifiers.

---
 hw/usb/dev-mtp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
hw/usb/dev-mtp.c +4 -4
index f026419e47..ccbe25820b 100644
@@ -372,7 +372,7 @@ static const USBDesc desc = {
 /* ----------------------------------------------------------------------- */
 
 static MTPObject *usb_mtp_object_alloc(MTPState *s, uint32_t handle,
-                                       MTPObject *parent, char *name)
+                                       MTPObject *parent, const char *name)
 {
     MTPObject *o = g_new0(MTPObject, 1);
 
@@ -454,7 +454,7 @@ static MTPObject *usb_mtp_object_lookup(MTPState *s, uint32_t handle)
 }
 
 static MTPObject *usb_mtp_add_child(MTPState *s, MTPObject *o,
-                                    char *name)
+                                    const char *name)
 {
     MTPObject *child =
         usb_mtp_object_alloc(s, s->next_handle++, o, name);
@@ -473,7 +473,7 @@ static MTPObject *usb_mtp_add_child(MTPState *s, MTPObject *o,
 }
 
 static MTPObject *usb_mtp_object_lookup_name(MTPObject *parent,
-                                             char *name, int len)
+                                             const char *name, int len)
 {
     MTPObject *iter;
 
@@ -640,7 +640,7 @@ static void usb_mtp_inotify_cleanup(MTPState *s)
     }
 }
 
-static int usb_mtp_add_watch(int inotifyfd, char *path)
+static int usb_mtp_add_watch(int inotifyfd, const char *path)
 {
     uint32_t mask = IN_CREATE | IN_DELETE | IN_MODIFY;
 
Signature · 1 line
2.19.2
#6 lore raw

PATCH v7 6/11 authz: add QAuthZ object as an authorization base class

In reply to Daniel P. Berrangé

From: "Daniel P. Berrange" <[email protected]>

The current qemu_acl module provides a simple access control list facility inside QEMU, which is used via a set of monitor commands acl_show, acl_policy, acl_add, acl_remove & acl_reset.

Note there is no ability to create ACLs - the network services (eg VNC server) were expected to create ACLs that they want to check.

There is also no way to define ACLs on the command line, nor potentially integrate with external authorization systems like polkit, pam, ldap lookup, etc.

The QAuthZ object defines a minimal abstract QOM class that can be subclassed for creating different authorization providers.

---
 MAINTAINERS          |   7 +++
 Makefile             |  10 ++--
 Makefile.objs        |   6 +++
 Makefile.target      |   2 +
 authz/Makefile.objs  |   1 +
 authz/base.c         |  82 +++++++++++++++++++++++++++++++
 authz/trace-events   |   4 ++
 include/authz/base.h | 112 +++++++++++++++++++++++++++++++++++++++++++
 8 files changed, 220 insertions(+), 4 deletions(-)
 create mode 100644 authz/Makefile.objs
 create mode 100644 authz/base.c
 create mode 100644 authz/trace-events
 create mode 100644 include/authz/base.h
MAINTAINERS +7 -0
index 2e550622f9..e78de51da9 100644
@@ -2008,6 +2008,13 @@ F: io/
 F: include/io/
 F: tests/test-io-*
 
+User authorization
+M: Daniel P. Berrange <[email protected]>
+S: Maintained
+F: authz/
+F: include/authz/
+F: tests/test-authz-*
+
 Sockets
 M: Daniel P. Berrange <[email protected]>
 M: Gerd Hoffmann <[email protected]>
Makefile +6 -4
index f2947186a4..4b20ee2b19 100644
@@ -412,6 +412,7 @@ endif
 
 dummy := $(call unnest-vars,, \
                 stub-obj-y \
+                authz-obj-y \
                 chardev-obj-y \
                 util-obj-y \
                 qga-obj-y \
@@ -474,6 +475,7 @@ qemu-options.def: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
 SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
 SOFTMMU_SUBDIR_RULES=$(filter %-softmmu,$(SUBDIR_RULES))
 
+$(SOFTMMU_SUBDIR_RULES): $(authz-obj-y)
 $(SOFTMMU_SUBDIR_RULES): $(block-obj-y)
 $(SOFTMMU_SUBDIR_RULES): $(crypto-obj-y)
 $(SOFTMMU_SUBDIR_RULES): $(io-obj-y)
@@ -536,9 +538,9 @@ COMMON_LDADDS = libqemuutil.a
 
 qemu-img.o: qemu-img-cmds.h
 
-qemu-img$(EXESUF): qemu-img.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
-qemu-nbd$(EXESUF): qemu-nbd.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
-qemu-io$(EXESUF): qemu-io.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
+qemu-img$(EXESUF): qemu-img.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
+qemu-nbd$(EXESUF): qemu-nbd.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
+qemu-io$(EXESUF): qemu-io.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 
 qemu-bridge-helper$(EXESUF): qemu-bridge-helper.o $(COMMON_LDADDS)
 
@@ -549,7 +551,7 @@ qemu-edid$(EXESUF): qemu-edid.o hw/display/edid-generate.o $(COMMON_LDADDS)
 fsdev/virtfs-proxy-helper$(EXESUF): fsdev/virtfs-proxy-helper.o fsdev/9p-marshal.o fsdev/9p-iov-marshal.o $(COMMON_LDADDS)
 fsdev/virtfs-proxy-helper$(EXESUF): LIBS += -lcap
 
-scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
+scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(authz-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 ifdef CONFIG_MPATH
 scsi/qemu-pr-helper$(EXESUF): LIBS += -ludev -lmultipath -lmpathpersist
 endif
Makefile.objs +6 -0
index 7125d06293..ba083f2bf7 100644
@@ -62,6 +62,11 @@ util-obj-y += qapi/qapi-introspect.o
 
 chardev-obj-y = chardev/
 
+#######################################################################
+# authz-obj-y is code used by both qemu system emulation and qemu-img
+
+authz-obj-y = authz/
+
 #######################################################################
 # block-obj-y is code used by both qemu system emulation and qemu-img
 
@@ -200,6 +205,7 @@ trace-events-subdirs =
 trace-events-subdirs += accel/kvm
 trace-events-subdirs += accel/tcg
 trace-events-subdirs += audio
+trace-events-subdirs += authz
 trace-events-subdirs += block
 trace-events-subdirs += chardev
 trace-events-subdirs += crypto
Makefile.target +2 -0
index 4d56298bbf..c08461726d 100644
@@ -172,6 +172,7 @@ include $(SRC_PATH)/Makefile.objs
 dummy := $(call unnest-vars,,target-obj-y)
 target-obj-y-save := $(target-obj-y)
 dummy := $(call unnest-vars,.., \
+               authz-obj-y \
                block-obj-y \
                block-obj-m \
                chardev-obj-y \
@@ -185,6 +186,7 @@ target-obj-y := $(target-obj-y-save)
 all-obj-y += $(common-obj-y)
 all-obj-y += $(target-obj-y)
 all-obj-y += $(qom-obj-y)
+all-obj-$(CONFIG_SOFTMMU) += $(authz-obj-y)
 all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y) $(chardev-obj-y)
 all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y)
 all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
authz/Makefile.objs new file +1 -0
new file mode 100644
index 0000000000..12597c9528
@@ -0,0 +1 @@
+authz-obj-y += base.o
authz/base.c new file +82 -0

82 lines not on this page · raw message

authz/trace-events new file +4 -0
new file mode 100644
index 0000000000..481c90f511
@@ -0,0 +1,4 @@
+# See docs/devel/tracing.txt for syntax documentation.
+
+# authz/base.c
+qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p check identity=%s allowed=%d"
include/authz/base.h new file +112 -0

112 lines not on this page · raw message

Signature · 1 line
2.19.2
#5 lore raw

PATCH v7 5/11 hw/usb: switch MTP to use new inotify APIs

In reply to Daniel P. Berrangé

The internal inotify APIs allow a lot of conditional statements to be cleared out, and provide a simpler callback for handling events.

---
 hw/usb/dev-mtp.c    | 271 +++++++++++++++++---------------------------
 hw/usb/trace-events |   2 +-
 2 files changed, 108 insertions(+), 165 deletions(-)
hw/usb/dev-mtp.c +107 -164
index ccbe25820b..b9d03244b8 100644
@@ -11,17 +11,16 @@
 
 #include "qemu/osdep.h"
 #include "qapi/error.h"
+#include "qemu/error-report.h"
 #include <wchar.h>
 #include <dirent.h>
 
 #include <sys/statvfs.h>
-#ifdef CONFIG_INOTIFY1
-#include <sys/inotify.h>
-#include "qemu/main-loop.h"
-#endif
+
 
 #include "qemu-common.h"
 #include "qemu/iov.h"
+#include "qemu/filemonitor.h"
 #include "trace.h"
 #include "hw/usb.h"
 #include "desc.h"
@@ -124,7 +123,6 @@ enum {
     EP_EVENT,
 };
 
-#ifdef CONFIG_INOTIFY1
 typedef struct MTPMonEntry MTPMonEntry;
 
 struct MTPMonEntry {
@@ -133,7 +131,6 @@ struct MTPMonEntry {
 
     QTAILQ_ENTRY(MTPMonEntry) next;
 };
-#endif
 
 struct MTPControl {
     uint16_t     code;
@@ -162,10 +159,8 @@ struct MTPObject {
     char         *name;
     char         *path;
     struct stat  stat;
-#ifdef CONFIG_INOTIFY1
-    /* inotify watch cookie */
-    int          watchfd;
-#endif
+    /* file monitor watch id */
+    int          watchid;
     MTPObject    *parent;
     uint32_t     nchildren;
     QLIST_HEAD(, MTPObject) children;
@@ -188,11 +183,8 @@ struct MTPState {
     bool         readonly;
 
     QTAILQ_HEAD(, MTPObject) objects;
-#ifdef CONFIG_INOTIFY1
-    /* inotify descriptor */
-    int          inotifyfd;
+    QFileMonitor *file_monitor;
     QTAILQ_HEAD(events, MTPMonEntry) events;
-#endif
     /* Responder is expecting a write operation */
     bool write_pending;
     struct {
@@ -380,6 +372,7 @@ static MTPObject *usb_mtp_object_alloc(MTPState *s, uint32_t handle,
         goto ignore;
     }
 
+    o->watchid = -1;
     o->handle = handle;
     o->parent = parent;
     o->name = g_strdup(name);
@@ -426,6 +419,10 @@ static void usb_mtp_object_free(MTPState *s, MTPObject *o)
 
     trace_usb_mtp_object_free(s->dev.addr, o->handle, o->path);
 
+    if (o->watchid != -1 && s->file_monitor) {
+        qemu_file_monitor_remove_watch(s->file_monitor, o->path, o->watchid);
+    }
+
     QTAILQ_REMOVE(&s->objects, o, next);
     if (o->parent) {
         QLIST_REMOVE(o, list);
@@ -477,6 +474,10 @@ static MTPObject *usb_mtp_object_lookup_name(MTPObject *parent,
 {
     MTPObject *iter;
 
+    if (len == -1) {
+        len = strlen(name);
+    }
+
     QLIST_FOREACH(iter, &parent->children, list) {
         if (strncmp(iter->name, name, len) == 0) {
             return iter;
@@ -486,13 +487,12 @@ static MTPObject *usb_mtp_object_lookup_name(MTPObject *parent,
     return NULL;
 }
 
-#ifdef CONFIG_INOTIFY1
-static MTPObject *usb_mtp_object_lookup_wd(MTPState *s, int wd)
+static MTPObject *usb_mtp_object_lookup_id(MTPState *s, int id)
 {
     MTPObject *iter;
 
     QTAILQ_FOREACH(iter, &s->objects, next) {
-        if (iter->watchfd == wd) {
+        if (iter->watchid == id) {
             return iter;
         }
     }
@@ -500,158 +500,99 @@ static MTPObject *usb_mtp_object_lookup_wd(MTPState *s, int wd)
     return NULL;
 }
 
-static void inotify_watchfn(void *arg)
+static void file_monitor_event(int id,
+                               QFileMonitorEvent ev,
+                               const char *name,
+                               void *opaque)
 {
-    MTPState *s = arg;
-    ssize_t bytes;
-    /* From the man page: atleast one event can be read */
-    int pos;
-    char buf[sizeof(struct inotify_event) + NAME_MAX + 1];
-
-    for (;;) {
-        bytes = read(s->inotifyfd, buf, sizeof(buf));
-        pos = 0;
-
-        if (bytes <= 0) {
-            /* Better luck next time */
+    MTPState *s = opaque;
+    MTPObject *parent = usb_mtp_object_lookup_id(s, id);
+    MTPMonEntry *entry = NULL;
+    MTPObject *o;
+
+    if (!parent) {
+        return;
+    }
+
+    switch (ev) {
+    case QFILE_MONITOR_EVENT_CREATED:
+        if (usb_mtp_object_lookup_name(parent, name, -1)) {
+            /* Duplicate create event */
             return;
         }
+        entry = g_new0(MTPMonEntry, 1);
+        entry->handle = s->next_handle;
+        entry->event = EVT_OBJ_ADDED;
+        o = usb_mtp_add_child(s, parent, name);
+        if (!o) {
+            g_free(entry);
+            return;
+        }
+        trace_usb_mtp_file_monitor_event(s->dev.addr, name, "Obj Added");
+        break;
 
+    case QFILE_MONITOR_EVENT_DELETED:
         /*
-         * TODO: Ignore initiator initiated events.
-         * For now we are good because the store is RO
+         * The kernel issues a IN_IGNORED event
+         * when a dir containing a watchpoint is
+         * deleted, so we don't have to delete the
+         * watchpoint
          */
-        while (bytes > 0) {
-            char *p = buf + pos;
-            struct inotify_event *event = (struct inotify_event *)p;
-            int watchfd = 0;
-            uint32_t mask = event->mask & (IN_CREATE | IN_DELETE |
-                                           IN_MODIFY | IN_IGNORED);
-            MTPObject *parent = usb_mtp_object_lookup_wd(s, event->wd);
-            MTPMonEntry *entry = NULL;
-            MTPObject *o;
-
-            pos = pos + sizeof(struct inotify_event) + event->len;
-            bytes = bytes - pos;
-
-            if (!parent) {
-                continue;
-            }
-
-            switch (mask) {
-            case IN_CREATE:
-                if (usb_mtp_object_lookup_name
-                    (parent, event->name, event->len)) {
-                    /* Duplicate create event */
-                    continue;
-                }
-                entry = g_new0(MTPMonEntry, 1);
-                entry->handle = s->next_handle;
-                entry->event = EVT_OBJ_ADDED;
-                o = usb_mtp_add_child(s, parent, event->name);
-                if (!o) {
-                    g_free(entry);
-                    continue;
-                }
-                o->watchfd = watchfd;
-                trace_usb_mtp_inotify_event(s->dev.addr, event->name,
-                                            event->mask, "Obj Added");
-                break;
-
-            case IN_DELETE:
-                /*
-                 * The kernel issues a IN_IGNORED event
-                 * when a dir containing a watchpoint is
-                 * deleted, so we don't have to delete the
-                 * watchpoint
-                 */
-                o = usb_mtp_object_lookup_name(parent, event->name, event->len);
-                if (!o) {
-                    continue;
-                }
-                entry = g_new0(MTPMonEntry, 1);
-                entry->handle = o->handle;
-                entry->event = EVT_OBJ_REMOVED;
-                trace_usb_mtp_inotify_event(s->dev.addr, o->path,
-                                      event->mask, "Obj Deleted");
-                usb_mtp_object_free(s, o);
-                break;
-
-            case IN_MODIFY:
-                o = usb_mtp_object_lookup_name(parent, event->name, event->len);
-                if (!o) {
-                    continue;
-                }
-                entry = g_new0(MTPMonEntry, 1);
-                entry->handle = o->handle;
-                entry->event = EVT_OBJ_INFO_CHANGED;
-                trace_usb_mtp_inotify_event(s->dev.addr, o->path,
-                                      event->mask, "Obj Modified");
-                break;
-
-            case IN_IGNORED:
-                trace_usb_mtp_inotify_event(s->dev.addr, parent->path,
-                                      event->mask, "Obj parent dir ignored");
-                break;
-
-            default:
-                fprintf(stderr, "usb-mtp: failed to parse inotify event\n");
-                continue;
-            }
+        o = usb_mtp_object_lookup_name(parent, name, -1);
+        if (!o) {
+            return;
+        }
+        entry = g_new0(MTPMonEntry, 1);
+        entry->handle = o->handle;
+        entry->event = EVT_OBJ_REMOVED;
+        trace_usb_mtp_file_monitor_event(s->dev.addr, o->path, "Obj Deleted");
+        usb_mtp_object_free(s, o);
+        break;
 
-            if (entry) {
-                QTAILQ_INSERT_HEAD(&s->events, entry, next);
-            }
+    case QFILE_MONITOR_EVENT_MODIFIED:
+        o = usb_mtp_object_lookup_name(parent, name, -1);
+        if (!o) {
+            return;
         }
-    }
-}
+        entry = g_new0(MTPMonEntry, 1);
+        entry->handle = o->handle;
+        entry->event = EVT_OBJ_INFO_CHANGED;
+        trace_usb_mtp_file_monitor_event(s->dev.addr, o->path, "Obj Modified");
+        break;
 
-static int usb_mtp_inotify_init(MTPState *s)
-{
-    int fd;
+    case QFILE_MONITOR_EVENT_IGNORED:
+        trace_usb_mtp_file_monitor_event(s->dev.addr, parent->path,
+                                    "Obj parent dir ignored");
+        break;
 
-    fd = inotify_init1(IN_NONBLOCK);
-    if (fd == -1) {
-        return 1;
+    default:
+        g_assert_not_reached();
     }
 
-    QTAILQ_INIT(&s->events);
-    s->inotifyfd = fd;
-
-    qemu_set_fd_handler(fd, inotify_watchfn, NULL, s);
-
-    return 0;
+    if (entry) {
+        QTAILQ_INSERT_HEAD(&s->events, entry, next);
+    }
 }
 
-static void usb_mtp_inotify_cleanup(MTPState *s)
+static void usb_mtp_file_monitor_cleanup(MTPState *s)
 {
     MTPMonEntry *e, *p;
 
-    if (!s->inotifyfd) {
-        return;
-    }
-
-    qemu_set_fd_handler(s->inotifyfd, NULL, NULL, s);
-    close(s->inotifyfd);
-
     QTAILQ_FOREACH_SAFE(e, &s->events, next, p) {
         QTAILQ_REMOVE(&s->events, e, next);
         g_free(e);
     }
-}
-
-static int usb_mtp_add_watch(int inotifyfd, const char *path)
-{
-    uint32_t mask = IN_CREATE | IN_DELETE | IN_MODIFY;
 
-    return inotify_add_watch(inotifyfd, path, mask);
+    qemu_file_monitor_free(s->file_monitor);
+    s->file_monitor = NULL;
 }
-#endif
+
 
 static void usb_mtp_object_readdir(MTPState *s, MTPObject *o)
 {
     struct dirent *entry;
     DIR *dir;
+    Error *err = NULL;
 
     if (o->have_children) {
         return;
@@ -662,16 +603,21 @@ static void usb_mtp_object_readdir(MTPState *s, MTPObject *o)
     if (!dir) {
         return;
     }
-#ifdef CONFIG_INOTIFY1
-    int watchfd = usb_mtp_add_watch(s->inotifyfd, o->path);
-    if (watchfd == -1) {
-        fprintf(stderr, "usb-mtp: failed to add watch for %s\n", o->path);
-    } else {
-        trace_usb_mtp_inotify_event(s->dev.addr, o->path,
-                                    0, "Watch Added");
-        o->watchfd = watchfd;
+
+    if (s->file_monitor) {
+        int id = qemu_file_monitor_add_watch(s->file_monitor, o->path, NULL,
+                                             file_monitor_event, s, &err);
+        if (id == -1) {
+            error_report("usb-mtp: failed to add watch for %s: %s", o->path,
+                         error_get_pretty(err));
+            error_free(err);
+        } else {
+            trace_usb_mtp_file_monitor_event(s->dev.addr, o->path,
+                                             "Watch Added");
+            o->watchid = id;
+        }
     }
-#endif
+
     while ((entry = readdir(dir)) != NULL) {
         usb_mtp_add_child(s, o, entry->d_name);
     }
@@ -1179,13 +1125,11 @@ enum {
 /* Assumes that children, if any, have been already freed */
 static void usb_mtp_object_free_one(MTPState *s, MTPObject *o)
 {
-#ifndef CONFIG_INOTIFY1
     assert(o->nchildren == 0);
     QTAILQ_REMOVE(&s->objects, o, next);
     g_free(o->name);
     g_free(o->path);
     g_free(o);
-#endif
 }
 
 static int usb_mtp_deletefn(MTPState *s, MTPObject *o, uint32_t trans)
@@ -1284,6 +1228,7 @@ static void usb_mtp_command(MTPState *s, MTPControl *c)
     MTPData *data_in = NULL;
     MTPObject *o = NULL;
     uint32_t nres = 0, res0 = 0;
+    Error *err = NULL;
 
     /* sanity checks */
     if (c->code >= CMD_CLOSE_SESSION && s->session == 0) {
@@ -1311,19 +1256,21 @@ static void usb_mtp_command(MTPState *s, MTPControl *c)
         trace_usb_mtp_op_open_session(s->dev.addr);
         s->session = c->argv[0];
         usb_mtp_object_alloc(s, s->next_handle++, NULL, s->root);
-#ifdef CONFIG_INOTIFY1
-        if (usb_mtp_inotify_init(s)) {
-            fprintf(stderr, "usb-mtp: file monitoring init failed\n");
+
+        s->file_monitor = qemu_file_monitor_new(&err);
+        if (err) {
+            error_report("usb-mtp: file monitoring init failed: %s",
+                         error_get_pretty(err));
+            error_free(err);
+        } else {
+            QTAILQ_INIT(&s->events);
         }
-#endif
         break;
     case CMD_CLOSE_SESSION:
         trace_usb_mtp_op_close_session(s->dev.addr);
         s->session = 0;
         s->next_handle = 0;
-#ifdef CONFIG_INOTIFY1
-        usb_mtp_inotify_cleanup(s);
-#endif
+        usb_mtp_file_monitor_cleanup(s);
         usb_mtp_object_free(s, QTAILQ_FIRST(&s->objects));
         assert(QTAILQ_EMPTY(&s->objects));
         break;
@@ -1536,9 +1483,7 @@ static void usb_mtp_handle_reset(USBDevice *dev)
 
     trace_usb_mtp_reset(s->dev.addr);
 
-#ifdef CONFIG_INOTIFY1
-    usb_mtp_inotify_cleanup(s);
-#endif
+    usb_mtp_file_monitor_cleanup(s);
     usb_mtp_object_free(s, QTAILQ_FIRST(&s->objects));
     s->session = 0;
     usb_mtp_data_free(s->data_in);
@@ -1967,7 +1912,6 @@ static void usb_mtp_handle_data(USBDevice *dev, USBPacket *p)
         }
         break;
     case EP_EVENT:
-#ifdef CONFIG_INOTIFY1
         if (!QTAILQ_EMPTY(&s->events)) {
             struct MTPMonEntry *e = QTAILQ_LAST(&s->events, events);
             uint32_t handle;
@@ -1991,7 +1935,6 @@ static void usb_mtp_handle_data(USBDevice *dev, USBPacket *p)
             g_free(e);
             return;
         }
-#endif
         p->status = USB_RET_NAK;
         return;
     default:
hw/usb/trace-events +1 -1
index 2c18770ca5..99b1e8b8ce 100644
@@ -237,7 +237,7 @@ usb_mtp_op_unknown(int dev, uint32_t code) "dev %d, command code 0x%x"
 usb_mtp_object_alloc(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
 usb_mtp_object_free(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
 usb_mtp_add_child(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
-usb_mtp_inotify_event(int dev, const char *path, uint32_t mask, const char *s) "dev %d, path %s mask 0x%x event %s"
+usb_mtp_file_monitor_event(int dev, const char *path, const char *s) "dev %d, path %s event %s"
 
 # hw/usb/host-libusb.c
 usb_host_open_started(int bus, int addr) "dev %d:%d"
Signature · 1 line
2.19.2
#7 lore raw

PATCH v7 7/11 authz: add QAuthZSimple object type for easy whitelist auth checks

In reply to Daniel P. Berrangé

In many cases a single VM will just need to whilelist a single identity as the allowed user of network services. This is especially the case for TLS live migration (optionally with NBD storage) where we just need to whitelist the x509 certificate distinguished name of the source QEMU host.

Via QMP this can be configured with:

  {
    "execute": "object-add",
    "arguments": {
      "qom-type": "authz-simple",
      "id": "authz0",
      "parameters": {
        "identity": "fred"
      }
    }
  }

Or via the command line

-object authz-simple,id=authz0,identity=fred

---
 authz/Makefile.objs       |   1 +
 authz/simple.c            | 115 ++++++++++++++++++++++++++++++++++++++
 authz/trace-events        |   3 +
 include/authz/simple.h    |  84 ++++++++++++++++++++++++++++
 qemu-options.hx           |  24 ++++++++
 tests/Makefile.include    |   3 +
 tests/test-authz-simple.c |  50 +++++++++++++++++
 7 files changed, 280 insertions(+)
 create mode 100644 authz/simple.c
 create mode 100644 include/authz/simple.h
 create mode 100644 tests/test-authz-simple.c
authz/Makefile.objs +1 -0
index 12597c9528..2a75d53840 100644
@@ -1 +1,2 @@
 authz-obj-y += base.o
+authz-obj-y += simple.o
authz/simple.c new file +115 -0

115 lines not on this page · raw message

authz/trace-events +3 -0
index 481c90f511..1ef796c1e1 100644
@@ -2,3 +2,6 @@
 
 # authz/base.c
 qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p check identity=%s allowed=%d"
+
+# auth/simple.c
+qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *gotidentity) "AuthZ simple %p check want identity=%s got identity=%s"
include/authz/simple.h new file +84 -0

84 lines not on this page · raw message

qemu-options.hx +24 -0
index 269eda7a5d..7732881e7a 100644
@@ -4403,6 +4403,30 @@ e.g to launch a SEV guest
      .....
 
 @end example
+
+
+@item -object authz-simple,id=@var{id},identity=@var{string}
+
+Create an authorization object that will control access to network services.
+
+The @option{identity} parameter is identifies the user and its format
+depends on the network service that authorization object is associated
+with. For authorizing based on TLS x509 certificates, the identity must
+be the x509 distinguished name. Note that care must be taken to escape
+any commas in the distinguished name.
+
+An example authorization object to validate a x509 distinguished name
+would look like:
+@example
+ # $QEMU \
+     ...
+     -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \
+     ...
+@end example
+
+Note the use of quotes due to the x509 distinguished name containing
+whitespace, and escaping of ','.
+
 @end table
 
 ETEXI
tests/Makefile.include +3 -0
index e339287021..6dda623607 100644
@@ -112,6 +112,7 @@ endif
 check-unit-y += tests/test-timed-average$(EXESUF)
 check-unit-$(CONFIG_INOTIFY1) += tests/test-util-filemonitor$(EXESUF)
 check-unit-y += tests/test-util-sockets$(EXESUF)
+check-unit-y += tests/test-authz-simple$(EXESUF)
 check-unit-y += tests/test-io-task$(EXESUF)
 check-unit-y += tests/test-io-channel-socket$(EXESUF)
 check-unit-y += tests/test-io-channel-file$(EXESUF)
@@ -516,6 +517,7 @@ test-qapi-obj-y = tests/test-qapi-visit.o tests/test-qapi-types.o \
 benchmark-crypto-obj-y = $(crypto-obj-y) $(test-qom-obj-y)
 test-crypto-obj-y = $(crypto-obj-y) $(test-qom-obj-y)
 test-io-obj-y = $(io-obj-y) $(test-crypto-obj-y)
+test-authz-obj-y = $(test-qom-obj-y) $(authz-obj-y)
 test-block-obj-y = $(block-obj-y) $(test-io-obj-y) tests/iothread.o
 
 tests/check-qnum$(EXESUF): tests/check-qnum.o $(test-util-obj-y)
@@ -641,6 +643,7 @@ tests/test-util-filemonitor$(EXESUF): tests/test-util-filemonitor.o \
 	$(test-util-obj-y)
 tests/test-util-sockets$(EXESUF): tests/test-util-sockets.o \
 	tests/socket-helpers.o $(test-util-obj-y)
+tests/test-authz-simple$(EXESUF): tests/test-authz-simple.o $(test-authz-obj-y)
 tests/test-io-task$(EXESUF): tests/test-io-task.o $(test-io-obj-y)
 tests/test-io-channel-socket$(EXESUF): tests/test-io-channel-socket.o \
         tests/io-channel-helpers.o tests/socket-helpers.o $(test-io-obj-y)
tests/test-authz-simple.c new file +50 -0

50 lines not on this page · raw message

Signature · 1 line
2.19.2
#9 lore raw

PATCH v7 8/11 authz: add QAuthZList object type for an access control list

In reply to Daniel P. Berrangé

From: "Daniel P. Berrange" <[email protected]>

Add a QAuthZList object type that implements the QAuthZ interface. This built-in implementation maintains a trivial access control list with a sequence of match rules and a final default policy. This replicates the functionality currently provided by the qemu_acl module.

To create an instance of this object via the QMP monitor, the syntax used would be:

  {
    "execute": "object-add",
    "arguments": {
      "qom-type": "authz-list",
      "id": "authz0",
      "parameters": {
        "rules": [
           { "match": "fred", "policy": "allow", "format": "exact" },
           { "match": "bob", "policy": "allow", "format": "exact" },
           { "match": "danb", "policy": "deny", "format": "glob" },
           { "match": "dan*", "policy": "allow", "format": "exact" },
        ],
        "policy": "deny"
      }
    }
  }

This sets up an authorization rule that allows 'fred', 'bob' and anyone whose name starts with 'dan', except for 'danb'. Everyone unmatched is denied.

It is not currently possible to create this via -object, since there is no syntax supported to specify non-scalar properties for objects. This is likely to be addressed by later support for using JSON with -object, or an equivalent approach.

In any case the future "authz-listfile" object can be used from the CLI and is likely a better choice, as it allows the ACL to be refreshed automatically on change.

---
 .gitignore              |   4 +
 MAINTAINERS             |   1 +
 Makefile                |   7 +-
 Makefile.objs           |   4 +
 authz/Makefile.objs     |   1 +
 authz/list.c            | 285 ++++++++++++++++++++++++++++++++++++++++
 authz/trace-events      |   4 +
 include/authz/list.h    | 106 +++++++++++++++
 qapi/authz.json         |  58 ++++++++
 qapi/qapi-schema.json   |   1 +
 tests/Makefile.include  |   2 +
 tests/test-authz-list.c | 159 ++++++++++++++++++++++
 12 files changed, 631 insertions(+), 1 deletion(-)
 create mode 100644 authz/list.c
 create mode 100644 include/authz/list.h
 create mode 100644 qapi/authz.json
 create mode 100644 tests/test-authz-list.c
.gitignore +4 -0
index 64efdfd929..9b9fcad829 100644
@@ -47,6 +47,7 @@
 /qapi/qapi-commands-trace.[ch]
 /qapi/qapi-commands-transaction.[ch]
 /qapi/qapi-commands-ui.[ch]
+/qapi/qapi-commands-authz.[ch]
 /qapi/qapi-commands.[ch]
 /qapi/qapi-events-block-core.[ch]
 /qapi/qapi-events-block.[ch]
@@ -65,6 +66,7 @@
 /qapi/qapi-events-trace.[ch]
 /qapi/qapi-events-transaction.[ch]
 /qapi/qapi-events-ui.[ch]
+/qapi/qapi-events-authz.[ch]
 /qapi/qapi-events.[ch]
 /qapi/qapi-introspect.[ch]
 /qapi/qapi-types-block-core.[ch]
@@ -84,6 +86,7 @@
 /qapi/qapi-types-trace.[ch]
 /qapi/qapi-types-transaction.[ch]
 /qapi/qapi-types-ui.[ch]
+/qapi/qapi-types-authz.[ch]
 /qapi/qapi-types.[ch]
 /qapi/qapi-visit-block-core.[ch]
 /qapi/qapi-visit-block.[ch]
@@ -102,6 +105,7 @@
 /qapi/qapi-visit-trace.[ch]
 /qapi/qapi-visit-transaction.[ch]
 /qapi/qapi-visit-ui.[ch]
+/qapi/qapi-visit-authz.[ch]
 /qapi/qapi-visit.[ch]
 /qapi/qapi-doc.texi
 /qemu-doc.html
MAINTAINERS +1 -0
index e78de51da9..ee1f735567 100644
@@ -2012,6 +2012,7 @@ User authorization
 M: Daniel P. Berrange <[email protected]>
 S: Maintained
 F: authz/
+F: qapi/authz.json
 F: include/authz/
 F: tests/test-authz-*
 
Makefile +6 -1
index 4b20ee2b19..da9ea40725 100644
@@ -600,7 +600,8 @@ qapi-modules = $(SRC_PATH)/qapi/qapi-schema.json $(SRC_PATH)/qapi/common.json \
                $(SRC_PATH)/qapi/tpm.json \
                $(SRC_PATH)/qapi/trace.json \
                $(SRC_PATH)/qapi/transaction.json \
-               $(SRC_PATH)/qapi/ui.json
+               $(SRC_PATH)/qapi/ui.json \
+               $(SRC_PATH)/qapi/authz.json
 
 qapi/qapi-builtin-types.c qapi/qapi-builtin-types.h \
 qapi/qapi-types.c qapi/qapi-types.h \
@@ -621,6 +622,7 @@ qapi/qapi-types-tpm.c qapi/qapi-types-tpm.h \
 qapi/qapi-types-trace.c qapi/qapi-types-trace.h \
 qapi/qapi-types-transaction.c qapi/qapi-types-transaction.h \
 qapi/qapi-types-ui.c qapi/qapi-types-ui.h \
+qapi/qapi-types-authz.c qapi/qapi-types-authz.h \
 qapi/qapi-builtin-visit.c qapi/qapi-builtin-visit.h \
 qapi/qapi-visit.c qapi/qapi-visit.h \
 qapi/qapi-visit-block-core.c qapi/qapi-visit-block-core.h \
@@ -640,6 +642,7 @@ qapi/qapi-visit-tpm.c qapi/qapi-visit-tpm.h \
 qapi/qapi-visit-trace.c qapi/qapi-visit-trace.h \
 qapi/qapi-visit-transaction.c qapi/qapi-visit-transaction.h \
 qapi/qapi-visit-ui.c qapi/qapi-visit-ui.h \
+qapi/qapi-visit-authz.c qapi/qapi-visit-authz.h \
 qapi/qapi-commands.h qapi/qapi-commands.c \
 qapi/qapi-commands-block-core.c qapi/qapi-commands-block-core.h \
 qapi/qapi-commands-block.c qapi/qapi-commands-block.h \
@@ -658,6 +661,7 @@ qapi/qapi-commands-tpm.c qapi/qapi-commands-tpm.h \
 qapi/qapi-commands-trace.c qapi/qapi-commands-trace.h \
 qapi/qapi-commands-transaction.c qapi/qapi-commands-transaction.h \
 qapi/qapi-commands-ui.c qapi/qapi-commands-ui.h \
+qapi/qapi-commands-authz.c qapi/qapi-commands-authz.h \
 qapi/qapi-events.c qapi/qapi-events.h \
 qapi/qapi-events-block-core.c qapi/qapi-events-block-core.h \
 qapi/qapi-events-block.c qapi/qapi-events-block.h \
@@ -676,6 +680,7 @@ qapi/qapi-events-tpm.c qapi/qapi-events-tpm.h \
 qapi/qapi-events-trace.c qapi/qapi-events-trace.h \
 qapi/qapi-events-transaction.c qapi/qapi-events-transaction.h \
 qapi/qapi-events-ui.c qapi/qapi-events-ui.h \
+qapi/qapi-events-authz.c qapi/qapi-events-authz.h \
 qapi/qapi-introspect.h qapi/qapi-introspect.c \
 qapi/qapi-doc.texi: \
 qapi-gen-timestamp ;
Makefile.objs +4 -0
index ba083f2bf7..514ea2b403 100644
@@ -21,6 +21,7 @@ util-obj-y += qapi/qapi-types-tpm.o
 util-obj-y += qapi/qapi-types-trace.o
 util-obj-y += qapi/qapi-types-transaction.o
 util-obj-y += qapi/qapi-types-ui.o
+util-obj-y += qapi/qapi-types-authz.o
 util-obj-y += qapi/qapi-builtin-visit.o
 util-obj-y += qapi/qapi-visit.o
 util-obj-y += qapi/qapi-visit-block-core.o
@@ -40,6 +41,7 @@ util-obj-y += qapi/qapi-visit-tpm.o
 util-obj-y += qapi/qapi-visit-trace.o
 util-obj-y += qapi/qapi-visit-transaction.o
 util-obj-y += qapi/qapi-visit-ui.o
+util-obj-y += qapi/qapi-visit-authz.o
 util-obj-y += qapi/qapi-events.o
 util-obj-y += qapi/qapi-events-block-core.o
 util-obj-y += qapi/qapi-events-block.o
@@ -58,6 +60,7 @@ util-obj-y += qapi/qapi-events-tpm.o
 util-obj-y += qapi/qapi-events-trace.o
 util-obj-y += qapi/qapi-events-transaction.o
 util-obj-y += qapi/qapi-events-ui.o
+util-obj-y += qapi/qapi-events-authz.o
 util-obj-y += qapi/qapi-introspect.o
 
 chardev-obj-y = chardev/
@@ -160,6 +163,7 @@ common-obj-y += qapi/qapi-commands-tpm.o
 common-obj-y += qapi/qapi-commands-trace.o
 common-obj-y += qapi/qapi-commands-transaction.o
 common-obj-y += qapi/qapi-commands-ui.o
+common-obj-y += qapi/qapi-commands-authz.o
 common-obj-y += qapi/qapi-introspect.o
 common-obj-y += qmp.o hmp.o
 endif
authz/Makefile.objs +1 -0
index 2a75d53840..921fa624d7 100644
@@ -1,2 +1,3 @@
 authz-obj-y += base.o
 authz-obj-y += simple.o
+authz-obj-y += list.o
authz/list.c new file +285 -0

285 lines not on this page · raw message

authz/trace-events +4 -0
index 1ef796c1e1..a896d876e8 100644
@@ -5,3 +5,7 @@ qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p che
 
 # auth/simple.c
 qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *gotidentity) "AuthZ simple %p check want identity=%s got identity=%s"
+
+# auth/list.c
+qauthz_list_check_rule(void *authz, const char *identity, const char *rule, int format, int policy) "AuthZ list %p check rule=%s identity=%s format=%d policy=%d"
+qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ list %p default identity=%s policy=%d"
include/authz/list.h new file +106 -0

106 lines not on this page · raw message

qapi/authz.json new file +58 -0

58 lines not on this page · raw message

qapi/qapi-schema.json +1 -0
index 65b6dc2f6f..6a5a02a388 100644
@@ -89,6 +89,7 @@
 { 'include': 'rocker.json' }
 { 'include': 'tpm.json' }
 { 'include': 'ui.json' }
+{ 'include': 'authz.json' }
 { 'include': 'migration.json' }
 { 'include': 'transaction.json' }
 { 'include': 'trace.json' }
tests/Makefile.include +2 -0
index 6dda623607..825ea218cb 100644
@@ -113,6 +113,7 @@ check-unit-y += tests/test-timed-average$(EXESUF)
 check-unit-$(CONFIG_INOTIFY1) += tests/test-util-filemonitor$(EXESUF)
 check-unit-y += tests/test-util-sockets$(EXESUF)
 check-unit-y += tests/test-authz-simple$(EXESUF)
+check-unit-y += tests/test-authz-list$(EXESUF)
 check-unit-y += tests/test-io-task$(EXESUF)
 check-unit-y += tests/test-io-channel-socket$(EXESUF)
 check-unit-y += tests/test-io-channel-file$(EXESUF)
@@ -644,6 +645,7 @@ tests/test-util-filemonitor$(EXESUF): tests/test-util-filemonitor.o \
 tests/test-util-sockets$(EXESUF): tests/test-util-sockets.o \
 	tests/socket-helpers.o $(test-util-obj-y)
 tests/test-authz-simple$(EXESUF): tests/test-authz-simple.o $(test-authz-obj-y)
+tests/test-authz-list$(EXESUF): tests/test-authz-list.o $(test-authz-obj-y)
 tests/test-io-task$(EXESUF): tests/test-io-task.o $(test-io-obj-y)
 tests/test-io-channel-socket$(EXESUF): tests/test-io-channel-socket.o \
         tests/io-channel-helpers.o tests/socket-helpers.o $(test-io-obj-y)
tests/test-authz-list.c new file +159 -0

159 lines not on this page · raw message

Signature · 1 line
2.19.2
#10 lore raw

PATCH v7 9/11 authz: add QAuthZListFile object type for a file access control list

In reply to Daniel P. Berrangé

Add a QAuthZListFile object type that implements the QAuthZ interface. This built-in implementation is a proxy around the QAuthZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes.

To create an instance of this object via the QMP monitor, the syntax used would be:

      {
        "execute": "object-add",
        "arguments": {
          "qom-type": "authz-list-file",
          "id": "authz0",
          "parameters": {
            "filename": "/etc/qemu/vnc.acl",
	    "refresh": "yes"
          }
        }
      }

If "refresh" is "yes", inotify is used to monitor the file, automatically reloading changes. If an error occurs during reloading, all authorizations will fail until the file is next successfully loaded.

The /etc/qemu/vnc.acl file would contain a JSON representation of a QAuthZList object

    {
      "rules": [
         { "match": "fred", "policy": "allow", "format": "exact" },
         { "match": "bob", "policy": "allow", "format": "exact" },
         { "match": "danb", "policy": "deny", "format": "glob" },
         { "match": "dan*", "policy": "allow", "format": "exact" },
      ],
      "policy": "deny"
    }

This sets up an authorization rule that allows 'fred', 'bob' and anyone whose name starts with 'dan', except for 'danb'. Everyone unmatched is denied.

The object can be loaded on the comand line using

-object authz-list-file,id=authz0,filename=/etc/qemu/vnc.acl,refresh=yes

---
 authz/Makefile.objs         |   1 +
 authz/listfile.c            | 283 ++++++++++++++++++++++++++++++++++++
 authz/trace-events          |   4 +
 include/authz/listfile.h    | 111 ++++++++++++++
 qemu-options.hx             |  46 ++++++
 tests/Makefile.include      |   2 +
 tests/test-authz-listfile.c | 195 +++++++++++++++++++++++++
 7 files changed, 642 insertions(+)
 create mode 100644 authz/listfile.c
 create mode 100644 include/authz/listfile.h
 create mode 100644 tests/test-authz-listfile.c
authz/Makefile.objs +1 -0
index 921fa624d7..8351bf181d 100644
@@ -1,3 +1,4 @@
 authz-obj-y += base.o
 authz-obj-y += simple.o
 authz-obj-y += list.o
+authz-obj-y += listfile.o
authz/listfile.c new file +283 -0

283 lines not on this page · raw message

authz/trace-events +4 -0
index a896d876e8..fb65349a90 100644
@@ -9,3 +9,7 @@ qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *goti
 # auth/list.c
 qauthz_list_check_rule(void *authz, const char *identity, const char *rule, int format, int policy) "AuthZ list %p check rule=%s identity=%s format=%d policy=%d"
 qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ list %p default identity=%s policy=%d"
+
+# auth/listfile.c
+qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load filename=%s"
+qauthz_list_file_refresh(void *authz, const char *filename, int success) "AuthZ file %p load filename=%s success=%d"
include/authz/listfile.h new file +111 -0

111 lines not on this page · raw message

qemu-options.hx +46 -0

52 lines not on this page · raw message

tests/Makefile.include +2 -0
index 825ea218cb..a3f9134e85 100644
@@ -114,6 +114,7 @@ check-unit-$(CONFIG_INOTIFY1) += tests/test-util-filemonitor$(EXESUF)
 check-unit-y += tests/test-util-sockets$(EXESUF)
 check-unit-y += tests/test-authz-simple$(EXESUF)
 check-unit-y += tests/test-authz-list$(EXESUF)
+check-unit-y += tests/test-authz-listfile$(EXESUF)
 check-unit-y += tests/test-io-task$(EXESUF)
 check-unit-y += tests/test-io-channel-socket$(EXESUF)
 check-unit-y += tests/test-io-channel-file$(EXESUF)
@@ -646,6 +647,7 @@ tests/test-util-sockets$(EXESUF): tests/test-util-sockets.o \
 	tests/socket-helpers.o $(test-util-obj-y)
 tests/test-authz-simple$(EXESUF): tests/test-authz-simple.o $(test-authz-obj-y)
 tests/test-authz-list$(EXESUF): tests/test-authz-list.o $(test-authz-obj-y)
+tests/test-authz-listfile$(EXESUF): tests/test-authz-listfile.o $(test-authz-obj-y)
 tests/test-io-task$(EXESUF): tests/test-io-task.o $(test-io-obj-y)
 tests/test-io-channel-socket$(EXESUF): tests/test-io-channel-socket.o \
         tests/io-channel-helpers.o tests/socket-helpers.o $(test-io-obj-y)
tests/test-authz-listfile.c new file +195 -0

195 lines not on this page · raw message

Signature · 1 line
2.19.2
#16 lore raw

PATCH v7 10/11 authz: add QAuthZPAM object type for authorizing using PAM

In reply to Daniel P. Berrangé

From: "Daniel P. Berrange" <[email protected]>

Add an authorization backend that talks to PAM to check whether the user identity is allowed. This only uses the PAM account validation facility, which is essentially just a check to see if the provided username is permitted access. It doesn't use the authentication or session parts of PAM, since that's dealt with by the relevant part of QEMU (eg VNC server).

Consider starting QEMU with a VNC server and telling it to use TLS with x509 client certificates and configuring it to use an PAM to validate the x509 distinguished name. In this example we're telling it to use PAM for the QAuthZ impl with a service name of "qemu-vnc"

 $ qemu-system-x86_64 \
     -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\
             endpoint=server,verify-peer=yes \
     -object authz-pam,id=authz0,service=qemu-vnc \
     -vnc :1,tls-creds=tls0,tls-authz=authz0

This requires an /etc/pam/qemu-vnc file to be created with the auth rules. A very simple file based whitelist can be setup using

  $ cat > /etc/pam/qemu-vnc <<EOF
  account         requisite       pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow
  EOF

The /etc/qemu/vnc.allow file simply contains one username per line. Any username not in the file is denied. The usernames in this example are the x509 distinguished name from the client's x509 cert.

  $ cat > /etc/qemu/vnc.allow <<EOF
  CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB
  EOF

More interesting would be to configure PAM to use an LDAP backend, so that the QEMU authorization check data can be centralized instead of requiring each compute host to have file maintained.

The main limitation with this PAM module is that the rules apply to all QEMU instances on the host. Setting up different rules per VM, would require creating a separate PAM service name & config file for every guest. An alternative approach for the future might be to not pass in the plain username to PAM, but instead combine the VM name or UUID with the username. This requires further consideration though.

---
 authz/Makefile.objs     |   3 +
 authz/pamacct.c         | 149 ++++++++++++++++++++++++++++++++++++++++
 authz/trace-events      |   3 +
 configure               |  37 ++++++++++
 include/authz/pamacct.h | 100 +++++++++++++++++++++++++++
 qemu-options.hx         |  35 ++++++++++
 tests/Makefile.include  |   2 +
 tests/test-authz-pam.c  | 124 +++++++++++++++++++++++++++++++++
 8 files changed, 453 insertions(+)
 create mode 100644 authz/pamacct.c
 create mode 100644 include/authz/pamacct.h
 create mode 100644 tests/test-authz-pam.c
authz/Makefile.objs +3 -0
index 8351bf181d..ed7b273596 100644
@@ -2,3 +2,6 @@ authz-obj-y += base.o
 authz-obj-y += simple.o
 authz-obj-y += list.o
 authz-obj-y += listfile.o
+authz-obj-$(CONFIG_AUTH_PAM) += pamacct.o
+
+pamacct.o-libs = -lpam
authz/pamacct.c new file +149 -0

149 lines not on this page · raw message

authz/trace-events +3 -0
index fb65349a90..72c411927d 100644
@@ -13,3 +13,6 @@ qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ
 # auth/listfile.c
 qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load filename=%s"
 qauthz_list_file_refresh(void *authz, const char *filename, int success) "AuthZ file %p load filename=%s success=%d"
+
+# auth/pam.c
+qauthz_pam_check(void *authz, const char *identity, const char *service) "AuthZ PAM %p identity=%s service=%s"
configure +37 -0
index 0a3c6a72c3..e1b1730679 100755
@@ -460,6 +460,7 @@ gnutls=""
 nettle=""
 gcrypt=""
 gcrypt_hmac="no"
+auth_pam=""
 vte=""
 virglrenderer=""
 tpm="yes"
@@ -1373,6 +1374,10 @@ for opt do
   ;;
   --enable-gcrypt) gcrypt="yes"
   ;;
+  --disable-auth-pam) auth_pam="no"
+  ;;
+  --enable-auth-pam) auth_pam="yes"
+  ;;
   --enable-rdma) rdma="yes"
   ;;
   --disable-rdma) rdma="no"
@@ -1701,6 +1706,7 @@ disabled with --disable-FEATURE, default is enabled if available:
   gnutls          GNUTLS cryptography support
   nettle          nettle cryptography support
   gcrypt          libgcrypt cryptography support
+  auth-pam        PAM access control
   sdl             SDL UI
   --with-sdlabi     select preferred SDL ABI 1.2 or 2.0
   gtk             gtk UI
@@ -2851,6 +2857,33 @@ else
 fi
 
 
+##########################################
+# PAM probe
+
+if test "x$auth_pam" != "no"; then
+    cat > $TMPC <<EOF
+#include <security/pam_appl.h>
+#include <stdio.h>
+int main(void) {
+   const char *service_name = "qemu";
+   const char *user = "frank";
+   const struct pam_conv *pam_conv = NULL;
+   pam_handle_t *pamh = NULL;
+   pam_start(service_name, user, pam_conv, &pamh);
+   return 0;
+}
+EOF
+    if compile_prog "" "-lpam" ; then
+	auth_pam=yes
+    else
+	if test "$auth_pam" = "yes"; then
+	    feature_not_found "PAM" "Install PAM development package"
+	else
+	    auth_pam=no
+	fi
+    fi
+fi
+
 ##########################################
 # getifaddrs (for tests/test-io-channel-socket )
 
@@ -5997,6 +6030,7 @@ echo "GNUTLS support    $gnutls"
 echo "libgcrypt         $gcrypt"
 echo "nettle            $nettle $(echo_version $nettle $nettle_version)"
 echo "libtasn1          $tasn1"
+echo "PAM               $auth_pam"
 echo "curses support    $curses"
 echo "virgl support     $virglrenderer $(echo_version $virglrenderer $virgl_version)"
 echo "curl support      $curl"
@@ -6457,6 +6491,9 @@ fi
 if test "$tasn1" = "yes" ; then
   echo "CONFIG_TASN1=y" >> $config_host_mak
 fi
+if test "$auth_pam" = "yes" ; then
+    echo "CONFIG_AUTH_PAM=y" >> $config_host_mak
+fi
 if test "$have_ifaddrs_h" = "yes" ; then
     echo "HAVE_IFADDRS_H=y" >> $config_host_mak
 fi
include/authz/pamacct.h new file +100 -0

100 lines not on this page · raw message

qemu-options.hx +35 -0
index afc90dec2c..32d94ca960 100644
@@ -4473,6 +4473,41 @@ would look like:
      ...
 @end example
 
+@item -object authz-pam,id=@var{id},service=@var{string}
+
+Create an authorization object that will control access to network services.
+
+The @option{service} parameter provides the name of a PAM service to use
+for authorization. It requires that a file @code{/etc/pam.d/@var{service}}
+exist to provide the configuration for the @code{account} subsystem.
+
+An example authorization object to validate a TLS x509 distinguished
+name would look like:
+
+@example
+ # $QEMU \
+     ...
+     -object authz-pam,id=auth0,service=qemu-vnc
+     ...
+@end example
+
+There would then be a corresponding config file for PAM at
+@code{/etc/pam.d/qemu-vnc} that contains:
+
+@example
+account requisite  pam_listfile.so item=user sense=allow \
+           file=/etc/qemu/vnc.allow
+@end example
+
+Finally the @code{/etc/qemu/vnc.allow} file would contain
+the list of x509 distingished names that are permitted
+access
+
+@example
+CN=laptop.example.com,O=Example Home,L=London,ST=London,C=GB
+@end example
+
+
 @end table
 
 ETEXI
tests/Makefile.include +2 -0
index a3f9134e85..3ff42db3a2 100644
@@ -115,6 +115,7 @@ check-unit-y += tests/test-util-sockets$(EXESUF)
 check-unit-y += tests/test-authz-simple$(EXESUF)
 check-unit-y += tests/test-authz-list$(EXESUF)
 check-unit-y += tests/test-authz-listfile$(EXESUF)
+check-unit-$(CONFIG_AUTH_PAM) += tests/test-authz-pam$(EXESUF)
 check-unit-y += tests/test-io-task$(EXESUF)
 check-unit-y += tests/test-io-channel-socket$(EXESUF)
 check-unit-y += tests/test-io-channel-file$(EXESUF)
@@ -648,6 +649,7 @@ tests/test-util-sockets$(EXESUF): tests/test-util-sockets.o \
 tests/test-authz-simple$(EXESUF): tests/test-authz-simple.o $(test-authz-obj-y)
 tests/test-authz-list$(EXESUF): tests/test-authz-list.o $(test-authz-obj-y)
 tests/test-authz-listfile$(EXESUF): tests/test-authz-listfile.o $(test-authz-obj-y)
+tests/test-authz-pam$(EXESUF): tests/test-authz-pam.o $(test-authz-obj-y)
 tests/test-io-task$(EXESUF): tests/test-io-task.o $(test-io-obj-y)
 tests/test-io-channel-socket$(EXESUF): tests/test-io-channel-socket.o \
         tests/io-channel-helpers.o tests/socket-helpers.o $(test-io-obj-y)
tests/test-authz-pam.c new file +124 -0

124 lines not on this page · raw message

Signature · 1 line
2.19.2
#17 lore raw

PATCH v7 11/11 authz: delete existing ACL implementation

In reply to Daniel P. Berrangé

From: "Daniel P. Berrange" <[email protected]>

The 'qemu_acl' type was a previous non-QOM based attempt to provide an authorization facility in QEMU. Because it is non-QOM based it cannot be created via the command line and requires special monitor commands to manipulate it.

The new QAuthZ subclasses provide a superset of the functionality in qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor commands are converted to use the new QAuthZSimple data type instead in order to provide temporary backwards compatibility.

---
 crypto/tlssession.c            |  35 +++----
 crypto/trace-events            |   2 +-
 include/qemu/acl.h             |  66 ------------
 monitor.c                      | 185 ++++++++++++++++++++++-----------
 tests/Makefile.include         |   4 +-
 tests/test-crypto-tlssession.c |  15 ++-
 tests/test-io-channel-tls.c    |  16 ++-
 ui/vnc-auth-sasl.c             |  23 ++--
 ui/vnc-auth-sasl.h             |   5 +-
 ui/vnc-auth-vencrypt.c         |   2 +-
 ui/vnc-ws.c                    |   2 +-
 ui/vnc.c                       |  37 ++++---
 ui/vnc.h                       |   4 +-
 util/Makefile.objs             |   1 -
 util/acl.c                     | 179 -------------------------------
 15 files changed, 215 insertions(+), 361 deletions(-)
 delete mode 100644 include/qemu/acl.h
 delete mode 100644 util/acl.c
crypto/tlssession.c +17 -18
index 0dedd4af52..c3a920dfe8 100644
@@ -24,7 +24,7 @@
 #include "crypto/tlscredspsk.h"
 #include "crypto/tlscredsx509.h"
 #include "qapi/error.h"
-#include "qemu/acl.h"
+#include "authz/base.h"
 #include "trace.h"
 
 #ifdef CONFIG_GNUTLS
@@ -37,7 +37,7 @@ struct QCryptoTLSSession {
     QCryptoTLSCreds *creds;
     gnutls_session_t handle;
     char *hostname;
-    char *aclname;
+    char *authzid;
     bool handshakeComplete;
     QCryptoTLSSessionWriteFunc writeFunc;
     QCryptoTLSSessionReadFunc readFunc;
@@ -56,7 +56,7 @@ qcrypto_tls_session_free(QCryptoTLSSession *session)
     gnutls_deinit(session->handle);
     g_free(session->hostname);
     g_free(session->peername);
-    g_free(session->aclname);
+    g_free(session->authzid);
     object_unref(OBJECT(session->creds));
     g_free(session);
 }
@@ -95,7 +95,7 @@ qcrypto_tls_session_pull(void *opaque, void *buf, size_t len)
 QCryptoTLSSession *
 qcrypto_tls_session_new(QCryptoTLSCreds *creds,
                         const char *hostname,
-                        const char *aclname,
+                        const char *authzid,
                         QCryptoTLSCredsEndpoint endpoint,
                         Error **errp)
 {
@@ -105,13 +105,13 @@ qcrypto_tls_session_new(QCryptoTLSCreds *creds,
     session = g_new0(QCryptoTLSSession, 1);
     trace_qcrypto_tls_session_new(
         session, creds, hostname ? hostname : "<none>",
-        aclname ? aclname : "<none>", endpoint);
+        authzid ? authzid : "<none>", endpoint);
 
     if (hostname) {
         session->hostname = g_strdup(hostname);
     }
-    if (aclname) {
-        session->aclname = g_strdup(aclname);
+    if (authzid) {
+        session->authzid = g_strdup(authzid);
     }
     session->creds = creds;
     object_ref(OBJECT(creds));
@@ -262,6 +262,7 @@ qcrypto_tls_session_check_certificate(QCryptoTLSSession *session,
     unsigned int nCerts, i;
     time_t now;
     gnutls_x509_crt_t cert = NULL;
+    Error *err = NULL;
 
     now = time(NULL);
     if (now == ((time_t)-1)) {
@@ -349,19 +350,17 @@ qcrypto_tls_session_check_certificate(QCryptoTLSSession *session,
                            gnutls_strerror(ret));
                 goto error;
             }
-            if (session->aclname) {
-                qemu_acl *acl = qemu_acl_find(session->aclname);
-                int allow;
-                if (!acl) {
-                    error_setg(errp, "Cannot find ACL %s",
-                               session->aclname);
+            if (session->authzid) {
+                bool allow;
+
+                allow = qauthz_is_allowed_by_id(session->authzid,
+                                                session->peername, &err);
+                if (err) {
+                    error_propagate(errp, err);
                     goto error;
                 }
-
-                allow = qemu_acl_party_is_allowed(acl, session->peername);
-
                 if (!allow) {
-                    error_setg(errp, "TLS x509 ACL check for %s is denied",
+                    error_setg(errp, "TLS x509 authz check for %s is denied",
                                session->peername);
                     goto error;
                 }
@@ -555,7 +554,7 @@ qcrypto_tls_session_get_peer_name(QCryptoTLSSession *session)
 QCryptoTLSSession *
 qcrypto_tls_session_new(QCryptoTLSCreds *creds G_GNUC_UNUSED,
                         const char *hostname G_GNUC_UNUSED,
-                        const char *aclname G_GNUC_UNUSED,
+                        const char *authzid G_GNUC_UNUSED,
                         QCryptoTLSCredsEndpoint endpoint G_GNUC_UNUSED,
                         Error **errp)
 {
crypto/trace-events +1 -1
index 597389b73c..a38ad7b787 100644
@@ -19,5 +19,5 @@ qcrypto_tls_creds_x509_load_cert(void *creds, int isServer, const char *file) "T
 qcrypto_tls_creds_x509_load_cert_list(void *creds, const char *file) "TLS creds x509 load cert list creds=%p file=%s"
 
 # crypto/tlssession.c
-qcrypto_tls_session_new(void *session, void *creds, const char *hostname, const char *aclname, int endpoint) "TLS session new session=%p creds=%p hostname=%s aclname=%s endpoint=%d"
+qcrypto_tls_session_new(void *session, void *creds, const char *hostname, const char *authzid, int endpoint) "TLS session new session=%p creds=%p hostname=%s authzid=%s endpoint=%d"
 qcrypto_tls_session_check_creds(void *session, const char *status) "TLS session check creds session=%p status=%s"
include/qemu/acl.h deleted +0 -66

66 lines not on this page · raw message

monitor.c +125 -60

240 lines not on this page · raw message

tests/Makefile.include +2 -2
index 3ff42db3a2..735d79a31d 100644
@@ -517,8 +517,8 @@ test-qom-obj-y = $(qom-obj-y) $(test-util-obj-y)
 test-qapi-obj-y = tests/test-qapi-visit.o tests/test-qapi-types.o \
 	tests/test-qapi-events.o tests/test-qapi-introspect.o \
 	$(test-qom-obj-y)
-benchmark-crypto-obj-y = $(crypto-obj-y) $(test-qom-obj-y)
-test-crypto-obj-y = $(crypto-obj-y) $(test-qom-obj-y)
+benchmark-crypto-obj-y = $(authz-obj-y) $(crypto-obj-y) $(test-qom-obj-y)
+test-crypto-obj-y = $(authz-obj-y) $(crypto-obj-y) $(test-qom-obj-y)
 test-io-obj-y = $(io-obj-y) $(test-crypto-obj-y)
 test-authz-obj-y = $(test-qom-obj-y) $(authz-obj-y)
 test-block-obj-y = $(block-obj-y) $(test-io-obj-y) tests/iothread.o
tests/test-crypto-tlssession.c +10 -5
index 6fa9950afb..15212ec276 100644
@@ -28,7 +28,7 @@
 #include "qom/object_interfaces.h"
 #include "qapi/error.h"
 #include "qemu/sockets.h"
-#include "qemu/acl.h"
+#include "authz/list.h"
 
 #ifdef QCRYPTO_HAVE_TLS_TEST_SUPPORT
 
@@ -229,7 +229,7 @@ static void test_crypto_tls_session_x509(const void *opaque)
     QCryptoTLSCreds *serverCreds;
     QCryptoTLSSession *clientSess = NULL;
     QCryptoTLSSession *serverSess = NULL;
-    qemu_acl *acl;
+    QAuthZList *auth;
     const char * const *wildcards;
     int channel[2];
     bool clientShake = false;
@@ -285,11 +285,15 @@ static void test_crypto_tls_session_x509(const void *opaque)
         SERVER_CERT_DIR);
     g_assert(serverCreds != NULL);
 
-    acl = qemu_acl_init("tlssessionacl");
-    qemu_acl_reset(acl);
+    auth = qauthz_list_new("tlssessionacl",
+                           QAUTHZ_LIST_POLICY_DENY,
+                           &error_abort);
     wildcards = data->wildcards;
     while (wildcards && *wildcards) {
-        qemu_acl_append(acl, 0, *wildcards);
+        qauthz_list_append_rule(auth, *wildcards,
+                                QAUTHZ_LIST_POLICY_ALLOW,
+                                QAUTHZ_LIST_FORMAT_GLOB,
+                                &error_abort);
         wildcards++;
     }
 
@@ -377,6 +381,7 @@ static void test_crypto_tls_session_x509(const void *opaque)
 
     object_unparent(OBJECT(serverCreds));
     object_unparent(OBJECT(clientCreds));
+    object_unparent(OBJECT(auth));
 
     qcrypto_tls_session_free(serverSess);
     qcrypto_tls_session_free(clientSess);
tests/test-io-channel-tls.c +11 -5
index 4900c6d433..43b707eba7 100644
@@ -29,8 +29,8 @@
 #include "io-channel-helpers.h"
 #include "crypto/init.h"
 #include "crypto/tlscredsx509.h"
-#include "qemu/acl.h"
 #include "qapi/error.h"
+#include "authz/list.h"
 #include "qom/object_interfaces.h"
 
 #ifdef QCRYPTO_HAVE_TLS_TEST_SUPPORT
@@ -113,7 +113,7 @@ static void test_io_channel_tls(const void *opaque)
     QIOChannelTLS *serverChanTLS;
     QIOChannelSocket *clientChanSock;
     QIOChannelSocket *serverChanSock;
-    qemu_acl *acl;
+    QAuthZList *auth;
     const char * const *wildcards;
     int channel[2];
     struct QIOChannelTLSHandshakeData clientHandshake = { false, false };
@@ -161,11 +161,15 @@ static void test_io_channel_tls(const void *opaque)
         SERVER_CERT_DIR);
     g_assert(serverCreds != NULL);
 
-    acl = qemu_acl_init("channeltlsacl");
-    qemu_acl_reset(acl);
+    auth = qauthz_list_new("channeltlsacl",
+                           QAUTHZ_LIST_POLICY_DENY,
+                           &error_abort);
     wildcards = data->wildcards;
     while (wildcards && *wildcards) {
-        qemu_acl_append(acl, 0, *wildcards);
+        qauthz_list_append_rule(auth, *wildcards,
+                                QAUTHZ_LIST_POLICY_ALLOW,
+                                QAUTHZ_LIST_FORMAT_GLOB,
+                                &error_abort);
         wildcards++;
     }
 
@@ -253,6 +257,8 @@ static void test_io_channel_tls(const void *opaque)
     object_unref(OBJECT(serverChanSock));
     object_unref(OBJECT(clientChanSock));
 
+    object_unparent(OBJECT(auth));
+
     close(channel[0]);
     close(channel[1]);
 }
ui/vnc-auth-sasl.c +16 -7
index 3751a777a4..7b2b09f242 100644
@@ -24,6 +24,7 @@
 
 #include "qemu/osdep.h"
 #include "qapi/error.h"
+#include "authz/base.h"
 #include "vnc.h"
 #include "trace.h"
 
@@ -146,13 +147,14 @@ size_t vnc_client_read_sasl(VncState *vs)
 static int vnc_auth_sasl_check_access(VncState *vs)
 {
     const void *val;
-    int err;
-    int allow;
+    int rv;
+    Error *err = NULL;
+    bool allow;
 
-    err = sasl_getprop(vs->sasl.conn, SASL_USERNAME, &val);
-    if (err != SASL_OK) {
+    rv = sasl_getprop(vs->sasl.conn, SASL_USERNAME, &val);
+    if (rv != SASL_OK) {
         trace_vnc_auth_fail(vs, vs->auth, "Cannot fetch SASL username",
-                            sasl_errstring(err, NULL, NULL));
+                            sasl_errstring(rv, NULL, NULL));
         return -1;
     }
     if (val == NULL) {
@@ -163,12 +165,19 @@ static int vnc_auth_sasl_check_access(VncState *vs)
     vs->sasl.username = g_strdup((const char*)val);
     trace_vnc_auth_sasl_username(vs, vs->sasl.username);
 
-    if (vs->vd->sasl.acl == NULL) {
+    if (vs->vd->sasl.authzid == NULL) {
         trace_vnc_auth_sasl_acl(vs, 1);
         return 0;
     }
 
-    allow = qemu_acl_party_is_allowed(vs->vd->sasl.acl, vs->sasl.username);
+    allow = qauthz_is_allowed_by_id(vs->vd->sasl.authzid,
+                                    vs->sasl.username, &err);
+    if (err) {
+        trace_vnc_auth_fail(vs, vs->auth, "Error from authz",
+                            error_get_pretty(err));
+        error_free(err);
+        return -1;
+    }
 
     trace_vnc_auth_sasl_acl(vs, allow);
     return allow ? 0 : -1;
ui/vnc-auth-sasl.h +3 -2
index 2ae224ee3a..fb55fe04ca 100644
@@ -30,8 +30,8 @@
 typedef struct VncStateSASL VncStateSASL;
 typedef struct VncDisplaySASL VncDisplaySASL;
 
-#include "qemu/acl.h"
 #include "qemu/main-loop.h"
+#include "authz/base.h"
 
 struct VncStateSASL {
     sasl_conn_t *conn;
@@ -60,7 +60,8 @@ struct VncStateSASL {
 };
 
 struct VncDisplaySASL {
-    qemu_acl *acl;
+    QAuthZ *authz;
+    char *authzid;
 };
 
 void vnc_sasl_client_cleanup(VncState *vs);
ui/vnc-auth-vencrypt.c +1 -1
index d99ea362c1..f072e16ace 100644
@@ -109,7 +109,7 @@ static int protocol_client_vencrypt_auth(VncState *vs, uint8_t *data, size_t len
         tls = qio_channel_tls_new_server(
             vs->ioc,
             vs->vd->tlscreds,
-            vs->vd->tlsaclname,
+            vs->vd->tlsauthzid,
             &err);
         if (!tls) {
             trace_vnc_auth_fail(vs, vs->auth, "TLS setup failed",
ui/vnc-ws.c +1 -1
index 950f1cd2ac..95c9703c72 100644
@@ -62,7 +62,7 @@ gboolean vncws_tls_handshake_io(QIOChannel *ioc G_GNUC_UNUSED,
     tls = qio_channel_tls_new_server(
         vs->ioc,
         vs->vd->tlscreds,
-        vs->vd->tlsaclname,
+        vs->vd->tlsauthzid,
         &err);
     if (!tls) {
         VNC_DEBUG("Failed to setup TLS %s\n", error_get_pretty(err));
ui/vnc.c +25 -12
index 0c1b477425..369a78cfce 100644
@@ -33,7 +33,7 @@
 #include "qemu/option.h"
 #include "qemu/sockets.h"
 #include "qemu/timer.h"
-#include "qemu/acl.h"
+#include "authz/list.h"
 #include "qemu/config-file.h"
 #include "qapi/qapi-events.h"
 #include "qapi/error.h"
@@ -3268,12 +3268,24 @@ static void vnc_display_close(VncDisplay *vd)
         object_unparent(OBJECT(vd->tlscreds));
         vd->tlscreds = NULL;
     }
-    g_free(vd->tlsaclname);
-    vd->tlsaclname = NULL;
+    if (vd->tlsauthz) {
+        object_unparent(OBJECT(vd->tlsauthz));
+        vd->tlsauthz = NULL;
+    }
+    g_free(vd->tlsauthzid);
+    vd->tlsauthzid = NULL;
     if (vd->lock_key_sync) {
         qemu_remove_led_event_handler(vd->led);
         vd->led = NULL;
     }
+#ifdef CONFIG_VNC_SASL
+    if (vd->sasl.authz) {
+        object_unparent(OBJECT(vd->sasl.authz));
+        vd->sasl.authz = NULL;
+    }
+    g_free(vd->sasl.authzid);
+    vd->sasl.authzid = NULL;
+#endif
 }
 
 int vnc_display_password(const char *id, const char *password)
@@ -3926,23 +3938,24 @@ void vnc_display_open(const char *id, Error **errp)
 
     if (acl) {
         if (strcmp(vd->id, "default") == 0) {
-            vd->tlsaclname = g_strdup("vnc.x509dname");
+            vd->tlsauthzid = g_strdup("vnc.x509dname");
         } else {
-            vd->tlsaclname = g_strdup_printf("vnc.%s.x509dname", vd->id);
+            vd->tlsauthzid = g_strdup_printf("vnc.%s.x509dname", vd->id);
         }
-        qemu_acl_init(vd->tlsaclname);
+        vd->tlsauthz = QAUTHZ(qauthz_list_new(vd->tlsauthzid,
+                                              QAUTHZ_LIST_POLICY_DENY,
+                                              &error_abort));
     }
 #ifdef CONFIG_VNC_SASL
     if (acl && sasl) {
-        char *aclname;
-
         if (strcmp(vd->id, "default") == 0) {
-            aclname = g_strdup("vnc.username");
+            vd->sasl.authzid = g_strdup("vnc.username");
         } else {
-            aclname = g_strdup_printf("vnc.%s.username", vd->id);
+            vd->sasl.authzid = g_strdup_printf("vnc.%s.username", vd->id);
         }
-        vd->sasl.acl = qemu_acl_init(aclname);
-        g_free(aclname);
+        vd->sasl.authz = QAUTHZ(qauthz_list_new(vd->sasl.authzid,
+                                                QAUTHZ_LIST_POLICY_DENY,
+                                                &error_abort));
     }
 #endif
 
ui/vnc.h +3 -1
index a86e0610e8..29ee1738a5 100644
@@ -39,6 +39,7 @@
 #include "io/channel-socket.h"
 #include "io/channel-tls.h"
 #include "io/net-listener.h"
+#include "authz/base.h"
 #include <zlib.h>
 
 #include "keymaps.h"
@@ -177,7 +178,8 @@ struct VncDisplay
     bool lossy;
     bool non_adaptive;
     QCryptoTLSCreds *tlscreds;
-    char *tlsaclname;
+    QAuthZ *tlsauthz;
+    char *tlsauthzid;
 #ifdef CONFIG_VNC_SASL
     VncDisplaySASL sasl;
 #endif
util/Makefile.objs +0 -1
index c1dd746902..0808575e3e 100644
@@ -20,7 +20,6 @@ util-obj-y += envlist.o path.o module.o
 util-obj-y += host-utils.o
 util-obj-y += bitmap.o bitops.o hbitmap.o
 util-obj-y += fifo8.o
-util-obj-y += acl.o
 util-obj-y += cacheinfo.o
 util-obj-y += error.o qemu-error.o
 util-obj-y += id.o
util/acl.c deleted +0 -179

179 lines not on this page · raw message

Signature · 1 line
2.19.2
Reviewed-by Tested-by on v7 7/11
#8 lore raw

Re: [Qemu-devel] [PATCH v7 07/11] authz: add QAuthZSimple object type for easy whitelist auth checks

In reply to Daniel P. Berrangé

Hi Daniel,

Quoted 6 lines · Daniel P. Berrangé

In many cases a single VM will just need to whilelist a single identity as the allowed user of network services. This is especially the case for TLS live migration (optionally with NBD storage) where we just need to whitelist the x509 certificate distinguished name of the source QEMU host.

Quoted 8 lines

Via QMP this can be configured with:

  {
    "execute": "object-add",
    "arguments": {
      "qom-type": "authz-simple",
      "id": "authz0",
      "parameters": {

This example should be "parameters" -> "props"

Quoted 213 lines
        "identity": "fred"
      }
    }

}

Or via the command line

-object authz-simple,id=authz0,identity=fred

---
 authz/Makefile.objs       |   1 +
 authz/simple.c            | 115 ++++++++++++++++++++++++++++++++++++++
 authz/trace-events        |   3 +
 include/authz/simple.h    |  84 ++++++++++++++++++++++++++++
 qemu-options.hx           |  24 ++++++++
 tests/Makefile.include    |   3 +
 tests/test-authz-simple.c |  50 +++++++++++++++++
 7 files changed, 280 insertions(+)
 create mode 100644 authz/simple.c
 create mode 100644 include/authz/simple.h
 create mode 100644 tests/test-authz-simple.c
authz/Makefile.objs +1 -0
index 12597c9528..2a75d53840 100644
@@ -1 +1,2 @@
 authz-obj-y += base.o
+authz-obj-y += simple.o
authz/simple.c new file +115 -0
new file mode 100644
index 0000000000..8ab718803e
@@ -0,0 +1,115 @@
+/*
+ * QEMU simple authorization driver
+ *
+ * Copyright (c) 2018 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "authz/simple.h"
+#include "authz/trace.h"
+#include "qom/object_interfaces.h"
+
+static bool qauthz_simple_is_allowed(QAuthZ *authz,
+                                     const char *identity,
+                                     Error **errp)
+{
+    QAuthZSimple *sauthz = QAUTHZ_SIMPLE(authz);
+
+    trace_qauthz_simple_is_allowed(authz, sauthz->identity, identity);
+    return g_str_equal(identity, sauthz->identity);
+}
+
+static void
+qauthz_simple_prop_set_identity(Object *obj,
+                                const char *value,
+                                Error **errp G_GNUC_UNUSED)
+{
+    QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
+
+    g_free(sauthz->identity);
+    sauthz->identity = g_strdup(value);
+}
+
+
+static char *
+qauthz_simple_prop_get_identity(Object *obj,
+                                Error **errp G_GNUC_UNUSED)
+{
+    QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
+
+    return g_strdup(sauthz->identity);
+}
+
+
+static void
+qauthz_simple_finalize(Object *obj)
+{
+    QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
+
+    g_free(sauthz->identity);
+}
+
+
+static void
+qauthz_simple_class_init(ObjectClass *oc, void *data)
+{
+    QAuthZClass *authz = QAUTHZ_CLASS(oc);
+
+    authz->is_allowed = qauthz_simple_is_allowed;
+
+    object_class_property_add_str(oc, "identity",
+                                  qauthz_simple_prop_get_identity,
+                                  qauthz_simple_prop_set_identity,
+                                  NULL);
+}
+
+
+QAuthZSimple *qauthz_simple_new(const char *id,
+                                const char *identity,
+                                Error **errp)
+{
+    return QAUTHZ_SIMPLE(
+        object_new_with_props(TYPE_QAUTHZ_SIMPLE,
+                              object_get_objects_root(),
+                              id, errp,
+                              "identity", identity,
+                              NULL));
+}
+
+
+static const TypeInfo qauthz_simple_info = {
+    .parent = TYPE_QAUTHZ,
+    .name = TYPE_QAUTHZ_SIMPLE,
+    .instance_size = sizeof(QAuthZSimple),
+    .instance_finalize = qauthz_simple_finalize,
+    .class_size = sizeof(QAuthZSimpleClass),
+    .class_init = qauthz_simple_class_init,
+    .interfaces = (InterfaceInfo[]) {
+        { TYPE_USER_CREATABLE },
+        { }
+    }
+};
+
+
+static void
+qauthz_simple_register_types(void)
+{
+    type_register_static(&qauthz_simple_info);
+}
+
+
+type_init(qauthz_simple_register_types);
authz/trace-events +3 -0
index 481c90f511..1ef796c1e1 100644
@@ -2,3 +2,6 @@
 
 # authz/base.c
 qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p check identity=%s allowed=%d"
+
+# auth/simple.c
+qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *gotidentity) "AuthZ simple %p check want identity=%s got identity=%s"
include/authz/simple.h new file +45 -0
new file mode 100644
index 0000000000..4686e7676d
@@ -0,0 +1,84 @@
+/*
+ * QEMU simple authorization driver
+ *
+ * Copyright (c) 2018 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef QAUTHZ_SIMPLE_H__
+#define QAUTHZ_SIMPLE_H__
+
+#include "authz/base.h"
+
+#define TYPE_QAUTHZ_SIMPLE "authz-simple"
+
+#define QAUTHZ_SIMPLE_CLASS(klass)                        \
+    OBJECT_CLASS_CHECK(QAuthZSimpleClass, (klass),        \
+                       TYPE_QAUTHZ_SIMPLE)
+#define QAUTHZ_SIMPLE_GET_CLASS(obj)              \
+    OBJECT_GET_CLASS(QAuthZSimpleClass, (obj),    \
+                      TYPE_QAUTHZ_SIMPLE)
+#define QAUTHZ_SIMPLE(obj) \
+    INTERFACE_CHECK(QAuthZSimple, (obj),          \
+                    TYPE_QAUTHZ_SIMPLE)
+
+typedef struct QAuthZSimple QAuthZSimple;
+typedef struct QAuthZSimpleClass QAuthZSimpleClass;
+
+
+/**
+ * QAuthZSimple:
+ *
+ * This authorization driver provides a simple mechanism

include/authz/simple.h line 55

Quoted 10 lines
include/authz/simple.h new file +10 -0
+ * for granting access based on an exact matched username.
+ *
+ * To create an instance of this class via QMP:
+ *
+ *  {
+ *    "execute": "object-add",
+ *    "arguments": {
+ *      "qom-type": "authz-simple",
+ *      "id": "authz0",
+ *      "parameters": {

Ditto.

Quoted 139 lines
include/authz/simple.h new file +29 -0
+ *        "identity": "fred"
+ *      }
+ *    }
+ *  }
+ *
+ * Or via the command line
+ *
+ *   -object authz-simple,id=authz0,identity=fred
+ *
+ */
+struct QAuthZSimple {
+    QAuthZ parent_obj;
+
+    char *identity;
+};
+
+
+struct QAuthZSimpleClass {
+    QAuthZClass parent_class;
+};
+
+
+QAuthZSimple *qauthz_simple_new(const char *id,
+                                const char *identity,
+                                Error **errp);
+
+
+#endif /* QAUTHZ_SIMPLE_H__ */
+
qemu-options.hx +24 -0
index 269eda7a5d..7732881e7a 100644
@@ -4403,6 +4403,30 @@ e.g to launch a SEV guest
.....
 
 @end example
+
+
+@item -object authz-simple,id=@var{id},identity=@var{string}
+
+Create an authorization object that will control access to network services.
+
+The @option{identity} parameter is identifies the user and its format
+depends on the network service that authorization object is associated
+with. For authorizing based on TLS x509 certificates, the identity must
+be the x509 distinguished name. Note that care must be taken to escape
+any commas in the distinguished name.
+
+An example authorization object to validate a x509 distinguished name
+would look like:
+@example
+ # $QEMU \
+     ...
+     -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \
+     ...
+@end example
+
+Note the use of quotes due to the x509 distinguished name containing
+whitespace, and escaping of ','.
+
 @end table
 
 ETEXI
tests/Makefile.include +3 -0
index e339287021..6dda623607 100644
@@ -112,6 +112,7 @@ endif
 check-unit-y += tests/test-timed-average$(EXESUF)
 check-unit-$(CONFIG_INOTIFY1) += tests/test-util-filemonitor$(EXESUF)
 check-unit-y += tests/test-util-sockets$(EXESUF)
+check-unit-y += tests/test-authz-simple$(EXESUF)
 check-unit-y += tests/test-io-task$(EXESUF)
 check-unit-y += tests/test-io-channel-socket$(EXESUF)
 check-unit-y += tests/test-io-channel-file$(EXESUF)
@@ -516,6 +517,7 @@ test-qapi-obj-y = tests/test-qapi-visit.o tests/test-qapi-types.o \
 benchmark-crypto-obj-y = $(crypto-obj-y) $(test-qom-obj-y)
 test-crypto-obj-y = $(crypto-obj-y) $(test-qom-obj-y)
 test-io-obj-y = $(io-obj-y) $(test-crypto-obj-y)
+test-authz-obj-y = $(test-qom-obj-y) $(authz-obj-y)
 test-block-obj-y = $(block-obj-y) $(test-io-obj-y) tests/iothread.o
 
 tests/check-qnum$(EXESUF): tests/check-qnum.o $(test-util-obj-y)
@@ -641,6 +643,7 @@ tests/test-util-filemonitor$(EXESUF): tests/test-util-filemonitor.o \
 	$(test-util-obj-y)
 tests/test-util-sockets$(EXESUF): tests/test-util-sockets.o \
 	tests/socket-helpers.o $(test-util-obj-y)
+tests/test-authz-simple$(EXESUF): tests/test-authz-simple.o $(test-authz-obj-y)
 tests/test-io-task$(EXESUF): tests/test-io-task.o $(test-io-obj-y)
 tests/test-io-channel-socket$(EXESUF): tests/test-io-channel-socket.o \
         tests/io-channel-helpers.o tests/socket-helpers.o $(test-io-obj-y)
tests/test-authz-simple.c new file +40 -0
new file mode 100644
index 0000000000..2cf14fb87e
@@ -0,0 +1,50 @@
+/*
+ * QEMU simple authorization object testing
+ *
+ * Copyright (c) 2018 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+
+#include "authz/simple.h"
+
+
+static void test_authz_simple(void)
+{
+    QAuthZSimple *authz = qauthz_simple_new("authz0",
+                                            "cthulu",
+                                            &error_abort);
+
+    g_assert(!qauthz_is_allowed(QAUTHZ(authz), "cthul", &error_abort));
+    g_assert(qauthz_is_allowed(QAUTHZ(authz), "cthulu", &error_abort));
+    g_assert(!qauthz_is_allowed(QAUTHZ(authz), "cthuluu", &error_abort));
+    g_assert(!qauthz_is_allowed(QAUTHZ(authz), "fred", &error_abort));
+
+    object_unparent(OBJECT(authz));
+}
+

tests/test-authz-simple.c line 50

Quoted 10 lines
tests/test-authz-simple.c new file +10 -0
+
+int main(int argc, char **argv)
+{
+    g_test_init(&argc, &argv, NULL);
+    module_call_init(MODULE_INIT_QOM);
+
+    g_test_add_func("/authz/simple", test_authz_simple);
+
+    return g_test_run();
+}
Tested-by Reviewed-by on v7 9/11
#11 lore raw

Re: [Qemu-devel] [PATCH v7 09/11] authz: add QAuthZListFile object type for a file access control list

In reply to Daniel P. Berrangé
Quoted 8 lines · Daniel P. Berrangé

Add a QAuthZListFile object type that implements the QAuthZ interface. This built-in implementation is a proxy around the QAuthZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes.

To create an instance of this object via the QMP monitor, the syntax used would be:

Quoted 6 lines
      {
        "execute": "object-add",
        "arguments": {
          "qom-type": "authz-list-file",
          "id": "authz0",
          "parameters": {

"parameters" -> "props"

Quoted 2 lines
            "filename": "/etc/qemu/vnc.acl",
	    "refresh": "yes"

I had to use "refresh": yes (value unquoted) to avoid:

{
"error": {
"class": "GenericError",
"desc": "Invalid parameter type for 'refresh', expected: boolean"
}
}

Quoted 409 lines
          }
        }
      }

If "refresh" is "yes", inotify is used to monitor the file, automatically reloading changes. If an error occurs during reloading, all authorizations will fail until the file is next successfully loaded.

The /etc/qemu/vnc.acl file would contain a JSON representation of a QAuthZList object

    {
      "rules": [
         { "match": "fred", "policy": "allow", "format": "exact" },
         { "match": "bob", "policy": "allow", "format": "exact" },
         { "match": "danb", "policy": "deny", "format": "glob" },
         { "match": "dan*", "policy": "allow", "format": "exact" },
      ],
      "policy": "deny"
    }

This sets up an authorization rule that allows 'fred', 'bob' and anyone whose name starts with 'dan', except for 'danb'. Everyone unmatched is denied.

The object can be loaded on the comand line using

-object authz-list-file,id=authz0,filename=/etc/qemu/vnc.acl,refresh=yes

---
 authz/Makefile.objs         |   1 +
 authz/listfile.c            | 283 ++++++++++++++++++++++++++++++++++++
 authz/trace-events          |   4 +
 include/authz/listfile.h    | 111 ++++++++++++++
 qemu-options.hx             |  46 ++++++
 tests/Makefile.include      |   2 +
 tests/test-authz-listfile.c | 195 +++++++++++++++++++++++++
 7 files changed, 642 insertions(+)
 create mode 100644 authz/listfile.c
 create mode 100644 include/authz/listfile.h
 create mode 100644 tests/test-authz-listfile.c
authz/Makefile.objs +1 -0
index 921fa624d7..8351bf181d 100644
@@ -1,3 +1,4 @@
 authz-obj-y += base.o
 authz-obj-y += simple.o
 authz-obj-y += list.o
+authz-obj-y += listfile.o
authz/listfile.c new file +283 -0
new file mode 100644
index 0000000000..d4579767e7
@@ -0,0 +1,283 @@
+/*
+ * QEMU access control list file authorization driver
+ *
+ * Copyright (c) 2018 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "authz/listfile.h"
+#include "authz/trace.h"
+#include "qemu/error-report.h"
+#include "qemu/main-loop.h"
+#include "qemu/sockets.h"
+#include "qemu/filemonitor.h"
+#include "qom/object_interfaces.h"
+#include "qapi/qapi-visit-authz.h"
+#include "qapi/qmp/qjson.h"
+#include "qapi/qmp/qobject.h"
+#include "qapi/qmp/qerror.h"
+#include "qapi/qobject-input-visitor.h"
+
+
+static bool
+qauthz_list_file_is_allowed(QAuthZ *authz,
+                            const char *identity,
+                            Error **errp)
+{
+    QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(authz);
+    if (fauthz->list) {
+        return qauthz_is_allowed(fauthz->list, identity, errp);
+    }
+
+    return false;
+}
+
+
+static QAuthZ *
+qauthz_list_file_load(QAuthZListFile *fauthz, Error **errp)
+{
+    GError *err = NULL;
+    gchar *content = NULL;
+    gsize len;
+    QObject *obj = NULL;
+    QDict *pdict;
+    Visitor *v = NULL;
+    QAuthZ *ret = NULL;
+
+    trace_qauthz_list_file_load(fauthz, fauthz->filename);
+    if (!g_file_get_contents(fauthz->filename, &content, &len, &err)) {
+        error_setg(errp, "Unable to read '%s': %s",
+                   fauthz->filename, err->message);
+        goto cleanup;
+    }
+
+    obj = qobject_from_json(content, errp);
+    if (!obj) {
+        goto cleanup;
+    }
+
+    pdict = qobject_to(QDict, obj);
+    if (!pdict) {
+        error_setg(errp, QERR_INVALID_PARAMETER_TYPE, "obj", "dict");
+        goto cleanup;
+    }
+
+    v = qobject_input_visitor_new(obj);
+
+    ret = (QAuthZ *)user_creatable_add_type(TYPE_QAUTHZ_LIST,
+                                            NULL, pdict, v, errp);
+
+ cleanup:
+    visit_free(v);
+    qobject_unref(obj);
+    if (err) {
+        g_error_free(err);
+    }
+    g_free(content);
+    return ret;
+}
+
+
+static void
+qauthz_list_file_event(int wd G_GNUC_UNUSED,
+                       QFileMonitorEvent ev G_GNUC_UNUSED,
+                       const char *name G_GNUC_UNUSED,
+                       void *opaque)
+{
+    QAuthZListFile *fauthz = opaque;
+    Error *err = NULL;
+
+    if (ev != QFILE_MONITOR_EVENT_MODIFIED &&
+        ev != QFILE_MONITOR_EVENT_CREATED) {
+        return;
+    }
+
+    object_unref(OBJECT(fauthz->list));
+    fauthz->list = qauthz_list_file_load(fauthz, &err);
+    trace_qauthz_list_file_refresh(fauthz,
+                                   fauthz->filename, fauthz->list ? 1 : 0);
+    if (!fauthz->list) {
+        error_report_err(err);
+    }
+}
+
+static void
+qauthz_list_file_complete(UserCreatable *uc, Error **errp)
+{
+    QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(uc);
+    gchar *dir = NULL, *file = NULL;
+
+    fauthz->list = qauthz_list_file_load(fauthz, errp);
+
+    if (!fauthz->refresh) {
+        return;
+    }
+
+    fauthz->file_monitor = qemu_file_monitor_new(errp);
+    if (!fauthz->file_monitor) {
+        return;
+    }
+
+    dir = g_path_get_dirname(fauthz->filename);
+    if (g_str_equal(dir, ".")) {
+        error_setg(errp, "Filename must be an absolute path");
+        goto cleanup;
+    }
+    file = g_path_get_basename(fauthz->filename);
+    if (g_str_equal(file, ".")) {
+        error_setg(errp, "Path has no trailing filename component");
+        goto cleanup;
+    }
+
+    fauthz->file_watch = qemu_file_monitor_add_watch(
+        fauthz->file_monitor, dir, file,
+        qauthz_list_file_event, fauthz, errp);
+    if (fauthz->file_watch < 0) {
+        goto cleanup;
+    }
+
+ cleanup:
+    g_free(file);
+    g_free(dir);
+}
+
+
+static void
+qauthz_list_file_prop_set_filename(Object *obj,
+                                   const char *value,
+                                   Error **errp G_GNUC_UNUSED)
+{
+    QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
+
+    g_free(fauthz->filename);
+    fauthz->filename = g_strdup(value);
+}
+
+
+static char *
+qauthz_list_file_prop_get_filename(Object *obj,
+                                   Error **errp G_GNUC_UNUSED)
+{
+    QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
+
+    return g_strdup(fauthz->filename);
+}
+
+
+static void
+qauthz_list_file_prop_set_refresh(Object *obj,
+                                  bool value,
+                                  Error **errp G_GNUC_UNUSED)
+{
+    QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
+
+    fauthz->refresh = value;
+}
+
+
+static bool
+qauthz_list_file_prop_get_refresh(Object *obj,
+                                  Error **errp G_GNUC_UNUSED)
+{
+    QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
+
+    return fauthz->refresh;
+}
+
+
+static void
+qauthz_list_file_finalize(Object *obj)
+{
+    QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
+
+    object_unref(OBJECT(fauthz->list));
+    g_free(fauthz->filename);
+    qemu_file_monitor_free(fauthz->file_monitor);
+}
+
+
+static void
+qauthz_list_file_class_init(ObjectClass *oc, void *data)
+{
+    UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
+    QAuthZClass *authz = QAUTHZ_CLASS(oc);
+
+    ucc->complete = qauthz_list_file_complete;
+
+    object_class_property_add_str(oc, "filename",
+                                  qauthz_list_file_prop_get_filename,
+                                  qauthz_list_file_prop_set_filename,
+                                  NULL);
+    object_class_property_add_bool(oc, "refresh",
+                                   qauthz_list_file_prop_get_refresh,
+                                   qauthz_list_file_prop_set_refresh,
+                                   NULL);
+
+    authz->is_allowed = qauthz_list_file_is_allowed;
+}
+
+
+static void
+qauthz_list_file_init(Object *obj)
+{
+    QAuthZListFile *authz = QAUTHZ_LIST_FILE(obj);
+
+    authz->file_watch = -1;
+#ifdef CONFIG_INOTIFY1
+    authz->refresh = TRUE;
+#endif
+}
+
+
+QAuthZListFile *qauthz_list_file_new(const char *id,
+                                     const char *filename,
+                                     bool refresh,
+                                     Error **errp)
+{
+    return QAUTHZ_LIST_FILE(
+        object_new_with_props(TYPE_QAUTHZ_LIST_FILE,
+                              object_get_objects_root(),
+                              id, errp,
+                              "filename", filename,
+                              "refresh", refresh ? "yes" : "no",
+                              NULL));
+}
+
+
+static const TypeInfo qauthz_list_file_info = {
+    .parent = TYPE_QAUTHZ,
+    .name = TYPE_QAUTHZ_LIST_FILE,
+    .instance_init = qauthz_list_file_init,
+    .instance_size = sizeof(QAuthZListFile),
+    .instance_finalize = qauthz_list_file_finalize,
+    .class_size = sizeof(QAuthZListFileClass),
+    .class_init = qauthz_list_file_class_init,
+    .interfaces = (InterfaceInfo[]) {
+        { TYPE_USER_CREATABLE },
+        { }
+    }
+};
+
+
+static void
+qauthz_list_file_register_types(void)
+{
+    type_register_static(&qauthz_list_file_info);
+}
+
+
+type_init(qauthz_list_file_register_types);
authz/trace-events +4 -0
index a896d876e8..fb65349a90 100644
@@ -9,3 +9,7 @@ qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *goti
 # auth/list.c
 qauthz_list_check_rule(void *authz, const char *identity, const char *rule, int format, int policy) "AuthZ list %p check rule=%s identity=%s format=%d policy=%d"
 qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ list %p default identity=%s policy=%d"
+
+# auth/listfile.c
+qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load filename=%s"
+qauthz_list_file_refresh(void *authz, const char *filename, int success) "AuthZ file %p load filename=%s success=%d"
include/authz/listfile.h new file +49 -0
new file mode 100644
index 0000000000..80de9fe9c1
@@ -0,0 +1,111 @@
+/*
+ * QEMU list file authorization driver
+ *
+ * Copyright (c) 2018 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef QAUTHZ_LIST_FILE_H__
+#define QAUTHZ_LIST_FILE_H__
+
+#include "authz/list.h"
+#include "qapi/qapi-types-authz.h"
+#include "qemu/filemonitor.h"
+
+#define TYPE_QAUTHZ_LIST_FILE "authz-list-file"
+
+#define QAUTHZ_LIST_FILE_CLASS(klass)                        \
+    OBJECT_CLASS_CHECK(QAuthZListFileClass, (klass),        \
+                       TYPE_QAUTHZ_LIST_FILE)
+#define QAUTHZ_LIST_FILE_GET_CLASS(obj)              \
+    OBJECT_GET_CLASS(QAuthZListFileClass, (obj),    \
+                      TYPE_QAUTHZ_LIST_FILE)
+#define QAUTHZ_LIST_FILE(obj) \
+    INTERFACE_CHECK(QAuthZListFile, (obj),          \
+                    TYPE_QAUTHZ_LIST_FILE)
+
+typedef struct QAuthZListFile QAuthZListFile;
+typedef struct QAuthZListFileClass QAuthZListFileClass;
+
+
+/**
+ * QAuthZListFile:
+ *
+ * This authorization driver provides a file mechanism
+ * for granting access by matching user names against a
+ * file of globs. Each match rule has an associated policy

include/authz/listfile.h line 59

Quoted 10 lines
include/authz/listfile.h new file +10 -0
+ * and a catch all policy applies if no rule matches
+ *
+ * To create an instance of this class via QMP:
+ *
+ *  {
+ *    "execute": "object-add",
+ *    "arguments": {
+ *      "qom-type": "authz-list-file",
+ *      "id": "authz0",
+ *      "parameters": {

Ditto ...

include/authz/listfile.h line 61

Quoted 2 lines
include/authz/listfile.h new file +2 -0
+ *        "filename": "/etc/qemu/myvm-vnc.acl",
+ *        "refresh": "yes"

Ditto.

Quoted 319 lines
include/authz/listfile.h new file +50 -0
+ *      }
+ *    }
+ *  }
+ *
+ * If 'refresh' is 'yes', inotify is used to monitor for changes
+ * to the file and auto-reload the rules.
+ *
+ * The myvm-vnc.acl file should contain the parameters for
+ * the QAuthZList object in JSON format:
+ *
+ *      {
+ *        "rules": [
+ *           { "match": "fred", "policy": "allow", "format": "exact" },
+ *           { "match": "bob", "policy": "allow", "format": "exact" },
+ *           { "match": "danb", "policy": "deny", "format": "exact" },
+ *           { "match": "dan*", "policy": "allow", "format": "glob" }
+ *        ],
+ *        "policy": "deny"
+ *      }
+ *
+ * The object can be created on the command line using
+ *
+ *   -object authz-list-file,id=authz0,\
+ *           filename=/etc/qemu/myvm-vnc.acl,refresh=yes
+ *
+ */
+struct QAuthZListFile {
+    QAuthZ parent_obj;
+
+    QAuthZ *list;
+    char *filename;
+    bool refresh;
+    QFileMonitor *file_monitor;
+    int file_watch;
+};
+
+
+struct QAuthZListFileClass {
+    QAuthZClass parent_class;
+};
+
+
+QAuthZListFile *qauthz_list_file_new(const char *id,
+                                     const char *filename,
+                                     bool refresh,
+                                     Error **errp);
+
+
+#endif /* QAUTHZ_LIST_FILE_H__ */
+
qemu-options.hx +46 -0
index 7732881e7a..afc90dec2c 100644
@@ -4427,6 +4427,52 @@ would look like:
 Note the use of quotes due to the x509 distinguished name containing
 whitespace, and escaping of ','.
 
+@item -object authz-listfile,id=@var{id},filename=@var{path},refresh=@var{yes|no}
+
+Create an authorization object that will control access to network services.
+
+The @option{filename} parameter is the fully qualified path to a file
+containing the access control list rules in JSON format.
+
+An example set of rules that match against SASL usernames might look
+like:
+
+@example
+  @{
+    "rules": [
+       @{ "match": "fred", "policy": "allow", "format": "exact" @},
+       @{ "match": "bob", "policy": "allow", "format": "exact" @},
+       @{ "match": "danb", "policy": "deny", "format": "glob" @},
+       @{ "match": "dan*", "policy": "allow", "format": "exact" @},
+    ],
+    "policy": "deny"
+  @}
+@end example
+
+When checking access the object will iterate over all the rules and
+the first rule to match will have its @option{policy} value returned
+as the result. If no rules match, then the default @option{policy}
+value is returned.
+
+The rules can either be an exact string match, or they can use the
+simple UNIX glob pattern matching to allow wildcards to be used.
+
+If @option{refresh} is set to true the file will be monitored
+and automatically reloaded whenever its content changes.
+
+As with the @code{authz-simple} object, the format of the identity
+strings being matched depends on the network service, but is usually
+a TLS x509 distinguished name, or a SASL username.
+
+An example authorization object to validate a SASL username
+would look like:
+@example
+ # $QEMU \
+     ...
+     -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes
+     ...
+@end example
+
 @end table
 
 ETEXI
tests/Makefile.include +2 -0
index 825ea218cb..a3f9134e85 100644
@@ -114,6 +114,7 @@ check-unit-$(CONFIG_INOTIFY1) += tests/test-util-filemonitor$(EXESUF)
 check-unit-y += tests/test-util-sockets$(EXESUF)
 check-unit-y += tests/test-authz-simple$(EXESUF)
 check-unit-y += tests/test-authz-list$(EXESUF)
+check-unit-y += tests/test-authz-listfile$(EXESUF)
 check-unit-y += tests/test-io-task$(EXESUF)
 check-unit-y += tests/test-io-channel-socket$(EXESUF)
 check-unit-y += tests/test-io-channel-file$(EXESUF)
@@ -646,6 +647,7 @@ tests/test-util-sockets$(EXESUF): tests/test-util-sockets.o \
 	tests/socket-helpers.o $(test-util-obj-y)
 tests/test-authz-simple$(EXESUF): tests/test-authz-simple.o $(test-authz-obj-y)
 tests/test-authz-list$(EXESUF): tests/test-authz-list.o $(test-authz-obj-y)
+tests/test-authz-listfile$(EXESUF): tests/test-authz-listfile.o $(test-authz-obj-y)
 tests/test-io-task$(EXESUF): tests/test-io-task.o $(test-io-obj-y)
 tests/test-io-channel-socket$(EXESUF): tests/test-io-channel-socket.o \
         tests/io-channel-helpers.o tests/socket-helpers.o $(test-io-obj-y)
tests/test-authz-listfile.c new file +185 -0
new file mode 100644
index 0000000000..1e452fef6d
@@ -0,0 +1,195 @@
+/*
+ * QEMU list authorization object tests
+ *
+ * Copyright (c) 2018 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/main-loop.h"
+#include "authz/listfile.h"
+
+static char *workdir;
+
+static gchar *qemu_authz_listfile_test_save(const gchar *name,
+                                            const gchar *cfg)
+{
+    gchar *path = g_strdup_printf("%s/default-deny.cfg", workdir);
+    GError *gerr = NULL;
+
+    if (!g_file_set_contents(path, cfg, -1, &gerr)) {
+        g_printerr("Unable to save config %s: %s\n",
+                   path, gerr->message);
+        g_error_free(gerr);
+        g_free(path);
+        rmdir(workdir);
+        abort();
+    }
+
+    return path;
+}
+
+static void test_authz_default_deny(void)
+{
+    gchar *file = qemu_authz_listfile_test_save(
+        "default-deny.cfg",
+        "{ \"policy\": \"deny\" }");
+    Error *local_err = NULL;
+
+    QAuthZListFile *auth = qauthz_list_file_new("auth0",
+                                                file, false,
+                                                &local_err);
+    unlink(file);
+    g_free(file);
+    g_assert(local_err == NULL);
+    g_assert(!qauthz_is_allowed(QAUTHZ(auth), "fred", &error_abort));
+
+    object_unparent(OBJECT(auth));
+}
+
+static void test_authz_default_allow(void)
+{
+    gchar *file = qemu_authz_listfile_test_save(
+        "default-allow.cfg",
+        "{ \"policy\": \"allow\" }");
+    Error *local_err = NULL;
+
+    QAuthZListFile *auth = qauthz_list_file_new("auth0",
+                                                file, false,
+                                                &local_err);
+    unlink(file);
+    g_free(file);
+    g_assert(local_err == NULL);
+    g_assert(qauthz_is_allowed(QAUTHZ(auth), "fred", &error_abort));
+
+    object_unparent(OBJECT(auth));
+}
+
+static void test_authz_explicit_deny(void)
+{
+    gchar *file = qemu_authz_listfile_test_save(
+        "explicit-deny.cfg",
+        "{ \"rules\": [ "
+        "    { \"match\": \"fred\","
+        "      \"policy\": \"deny\","
+        "      \"format\": \"exact\" } ],"
+        "  \"policy\": \"allow\" }");
+    Error *local_err = NULL;
+
+    QAuthZListFile *auth = qauthz_list_file_new("auth0",
+                                                file, false,
+                                                &local_err);
+    unlink(file);
+    g_free(file);
+    g_assert(local_err == NULL);
+
+    g_assert(!qauthz_is_allowed(QAUTHZ(auth), "fred", &error_abort));
+
+    object_unparent(OBJECT(auth));
+}
+
+static void test_authz_explicit_allow(void)
+{
+    gchar *file = qemu_authz_listfile_test_save(
+        "explicit-allow.cfg",
+        "{ \"rules\": [ "
+        "    { \"match\": \"fred\","
+        "      \"policy\": \"allow\","
+        "      \"format\": \"exact\" } ],"
+        "  \"policy\": \"deny\" }");
+    Error *local_err = NULL;
+
+    QAuthZListFile *auth = qauthz_list_file_new("auth0",
+                                                file, false,
+                                                &local_err);
+    unlink(file);
+    g_free(file);
+    g_assert(local_err == NULL);
+
+    g_assert(qauthz_is_allowed(QAUTHZ(auth), "fred", &error_abort));
+
+    object_unparent(OBJECT(auth));
+}
+
+
+static void test_authz_complex(void)
+{
+    gchar *file = qemu_authz_listfile_test_save(
+        "complex.cfg",
+        "{ \"rules\": [ "
+        "    { \"match\": \"fred\","
+        "      \"policy\": \"allow\","
+        "      \"format\": \"exact\" },"
+        "    { \"match\": \"bob\","
+        "      \"policy\": \"allow\","
+        "      \"format\": \"exact\" },"
+        "    { \"match\": \"dan\","
+        "      \"policy\": \"deny\","
+        "      \"format\": \"exact\" },"
+        "    { \"match\": \"dan*\","
+        "      \"policy\": \"allow\","
+        "      \"format\": \"glob\" } ],"
+        "  \"policy\": \"deny\" }");
+
+    Error *local_err = NULL;
+
+    QAuthZListFile *auth = qauthz_list_file_new("auth0",
+                                                file, false,
+                                                &local_err);
+    unlink(file);
+    g_free(file);
+    g_assert(local_err == NULL);
+
+    g_assert(qauthz_is_allowed(QAUTHZ(auth), "fred", &error_abort));
+    g_assert(qauthz_is_allowed(QAUTHZ(auth), "bob", &error_abort));
+    g_assert(!qauthz_is_allowed(QAUTHZ(auth), "dan", &error_abort));
+    g_assert(qauthz_is_allowed(QAUTHZ(auth), "danb", &error_abort));
+
+    object_unparent(OBJECT(auth));
+}
+
+
+int main(int argc, char **argv)
+{
+    int ret;
+    GError *gerr = NULL;
+
+    g_test_init(&argc, &argv, NULL);
+
+    module_call_init(MODULE_INIT_QOM);
+
+    workdir = g_dir_make_tmp("qemu-test-authz-listfile-XXXXXX",
+                             &gerr);
+    if (!workdir) {
+        g_printerr("Unable to create temporary dir: %s\n",
+                   gerr->message);
+        g_error_free(gerr);
+        abort();
+    }
+
+    g_test_add_func("/auth/list/default/deny", test_authz_default_deny);
+    g_test_add_func("/auth/list/default/allow", test_authz_default_allow);
+    g_test_add_func("/auth/list/explicit/deny", test_authz_explicit_deny);

tests/test-authz-listfile.c line 195

Quoted 10 lines
tests/test-authz-listfile.c new file +10 -0
+    g_test_add_func("/auth/list/explicit/allow", test_authz_explicit_allow);
+    g_test_add_func("/auth/list/complex", test_authz_complex);
+
+    ret = g_test_run();
+
+    rmdir(workdir);
+    g_free(workdir);
+
+    return ret;
+}

Except qauthz_list_file_event() which I'm not confident because I need to understand better how events works, rest of the patch:

#12 lore raw

Re: [Qemu-devel] [PATCH v7 09/11] authz: add QAuthZListFile object type for a file access control list

Quoted 16 lines · Philippe Mathieu-Daudé
Quoted 8 lines · Daniel P. Berrangé

Add a QAuthZListFile object type that implements the QAuthZ interface. This built-in implementation is a proxy around the QAuthZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes.

To create an instance of this object via the QMP monitor, the syntax used would be:

Quoted 6 lines
       {
         "execute": "object-add",
         "arguments": {
           "qom-type": "authz-list-file",
           "id": "authz0",
           "parameters": {
Quoted 6 lines

"parameters" -> "props"

Quoted 2 lines
             "filename": "/etc/qemu/vnc.acl",
	    "refresh": "yes"

I had to use "refresh": yes (value unquoted) to avoid:

Do you mean "refresh":true? (bare yes is not valid JSON, but bare true is the correct way for a JSON bool).

Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3266
Virtualization:  qemu.org | libvirt.org
#13 lore raw

Re: [Qemu-devel] [PATCH v7 09/11] authz: add QAuthZListFile object type for a file access control list

Quoted 20 lines · Eric Blake
Quoted 19 lines · Philippe Mathieu-Daudé
Quoted 9 lines · Daniel P. Berrangé

Add a QAuthZListFile object type that implements the QAuthZ interface. This
built-in implementation is a proxy around the QAuthZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes.

To create an instance of this object via the QMP monitor, the syntax used would be:

Quoted 6 lines

       {
         "execute": "object-add",
         "arguments": {
           "qom-type": "authz-list-file",
           "id": "authz0",
           "parameters": {

"parameters" -> "props"

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

             "filename": "/etc/qemu/vnc.acl",
        "refresh": "yes"

I had to use "refresh": yes (value unquoted) to avoid:

Do you mean "refresh":true?  (bare yes is not valid JSON, but bare true is the correct way for a JSON bool).

I first tried 'true' then was curious and tried 'yes' and it worked too...

#14 lore raw

Re: [Qemu-devel] [PATCH v7 09/11] authz: add QAuthZListFile object type for a file access control list

Quoted 8 lines · Philippe Mathieu-Daudé
Quoted 6 lines
Quoted 3 lines
Quoted 1 line

        "refresh": "yes"

I had to use "refresh": yes (value unquoted) to avoid:

Do you mean "refresh":true?  (bare yes is not valid JSON, but bare true is the correct way for a JSON bool).

I first tried 'true' then was curious and tried 'yes' and it worked too...

Ah, so you're using a python wrapper rather than direct QMP, and benefitting from a rather-forgiving parser that turns yes into the correct QMP true over the wire to the actual monitor.

Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3266
Virtualization:  qemu.org | libvirt.org
#15 lore raw

Re: [Qemu-devel] [PATCH v7 09/11] authz: add QAuthZListFile object type for a file access control list

Quoted 9 lines · Eric Blake
Quoted 7 lines · Philippe Mathieu-Daudé
Quoted 6 lines
Quoted 3 lines
Quoted 1 line

         "refresh": "yes"

I had to use "refresh": yes (value unquoted) to avoid:

Do you mean "refresh":true?  (bare yes is not valid JSON, but bare true is the correct way for a JSON bool).

Quoted 6 lines
Quoted 2 lines

I first tried 'true' then was curious and tried 'yes' and it worked too...

Ah, so you're using a python wrapper rather than direct QMP, and benefitting from a rather-forgiving parser that turns yes into the correct QMP true over the wire to the actual monitor.

I'm not sure I'm using a python wrapper, I use rlwrap following:

https://wiki.qemu.org/Documentation/QMP#Trying_it

Regardless, let's use the correct JSON bool for the documentation.