USB: qcaux: Add Motorola modem UARTs
Quoted 7 lines · Johan Hovold
Quoted 4 lines · Tony Lindgren
Yes correct lsusb -v output below with five UARTs with ff/ff/ff and two QMI ports that are already handled with an earlier commit
4071898bf0f4("net:qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4").Isn't it four QMI ports even (interfaces 5 through 8)?
Oh right yes it's four QMI ports.
Quoted 19 lines
Quoted 7 lines
bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 bInterfaceSubClass 255 bInterfaceProtocol 255Quoted 11 lines
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x85EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize0x00401x 64 bytes
bInterval 5
Quoted 2 lines
Since the modem (AT) port here has an interrupt endpoint, you should add these device ids to the option driver which can handle that.
Oh OK will do.
Quoted 2 lines
As the comment in qcaux suggests, that driver is intended for the diag port of some old devices where the modem port was handled by cdc-acm.
OK
Quoted 3 lines
Also, if possible please include the more compact output of usb-devices (or
/sys/kernel/debug/usb/devices) for the devices you have access to in the commit message.
Will do.
Thanks,
Tony