SiFive UART support
Subsystems (2)
v3 cover SiFive UART support
This patchset adds SiFive UART driver for SiFive UART found on SiFive boards.
The driver is tested on QEMU sifive_u machine. In fact, with this patchset same U-Boot binary boots on QEMU virt machine and QEMU sifive_u machine in both M-mode and S-mode.
The patches are based upon latest RISC-V UBoot tree
(git://git.denx.de/u-boot-riscv.git) at commit id 48cbf6246052de10d35b616b5efb2f783904a49d
Changes since v2:
- Added pending() callback implementation for tstc() console API to work correctly.
Changes since v1:
- Fixed copyright header in SiFive UART driver
- Imply SIFIVE_SERIAL for QEMU emulation instead of enabling it in defconfigs.
Anup Patel (2):
drivers: serial: Add SiFive UART driver
riscv: qemu: Imply SIFIVE_SERIAL for emulation
board/emulation/qemu-riscv/Kconfig | 1 + drivers/serial/Kconfig | 13 ++ drivers/serial/Makefile | 1 + drivers/serial/serial_sifive.c | 215 +++++++++++++++++++++++++++++ 4 files changed, 230 insertions(+) create mode 100644 drivers/serial/serial_sifive.c
Signature · 1 line
2.17.1
PATCH v3 1/2 drivers: serial: Add SiFive UART driver
This patch adds SiFive UART driver. The driver is 100% DM driver and it determines input clock using clk framework.
--- drivers/serial/Kconfig | 13 ++ drivers/serial/Makefile | 1 + drivers/serial/serial_sifive.c | 215 +++++++++++++++++++++++++++++++++ 3 files changed, 229 insertions(+) create mode 100644 drivers/serial/serial_sifive.c
drivers/serial/Kconfig +13 -0
@@ -343,6 +343,13 @@ config DEBUG_UART_SANDBOX start up driver model. The driver will be available until the real driver model serial is running. +config DEBUG_UART_SIFIVE + bool "SiFive UART" + help + Select this to enable a debug UART using the serial_sifive driver. You + will need to provide parameters to make this work. The driver will + be available until the real driver-model serial is running. + config DEBUG_UART_STM32 bool "STMicroelectronics STM32" depends on STM32_SERIAL
@@ -679,6 +686,12 @@ config PXA_SERIAL If you have a machine based on a Marvell XScale PXA2xx CPU you can enable its onboard serial ports by enabling this option. +config SIFIVE_SERIAL + bool "SiFive UART support" + depends on DM_SERIAL + help + This driver supports the SiFive UART. If unsure say N. + config STI_ASC_SERIAL bool "STMicroelectronics on-chip UART" depends on DM_SERIAL && ARCH_STI
drivers/serial/Makefile +1 -0
@@ -67,6 +67,7 @@ obj-$(CONFIG_NULLDEV_SERIAL) += serial_nulldev.o obj-$(CONFIG_OWL_SERIAL) += serial_owl.o obj-$(CONFIG_OMAP_SERIAL) += serial_omap.o obj-$(CONFIG_MTK_SERIAL) += serial_mtk.o +obj-$(CONFIG_SIFIVE_SERIAL) += serial_sifive.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_USB_TTY) += usbtty.o
drivers/serial/serial_sifive.c new file +215 -0
215 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v3 2/2 riscv: qemu: Imply SIFIVE_SERIAL for emulation
In reply to Anup PatelThis patch enables SiFive UART driver for QEMU RISC-V emulation by implying SIFIVE_SERIAL on BOARD_SPECIFIC_OPTIONS.
--- board/emulation/qemu-riscv/Kconfig | 1 + 1 file changed, 1 insertion(+)
board/emulation/qemu-riscv/Kconfig +1 -0
@@ -33,5 +33,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy imply CMD_FAT imply BOARD_LATE_INIT imply OF_BOARD_SETUP + imply SIFIVE_SERIAL endif
Signature · 1 line
2.17.1