Skip to contentSkip to conversation

PROBLEM: Xen paging-request boot failure since 4.19.5

DISCUSSION Ken Pizzini 2 participants 5 messages Dec 19, 2018 – Dec 20, 2018

lore
Share & tools
lore
#0 lore raw

Since 4.19.5 I have not been able to boot kernels on my Xen-hosted VM on a system with an Intel Xeon L5520 processor (microcode 0x1d).

4.19.4 worked fine; I've tried kernels 4.19.5, 4.19.6, 4.19.7 4.19.9, 4.19.10, 4.20-rc7, and they all throw:

     BUG: unable to handle kernel paging request at ffff88903fffc000
     PGD 1c0c067 P4D 1c0c067 PUD 0
     Oops: 0000 [#1] PREEMPT SMP NOPTI
     ... [register dump and call trace omitted, since I believe I located the
          offending source code]
     Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
     Kernel Offset: disabled

early in the system boot (fine details might differ; I did not carefully record the result of each test).

I finally had time to do some bisection, and the problem traces back to commit

    d52888aa2753e3063a9d3a0c9f72f94aa9809c15
    in tree fbbb33771ac6c392caeb283163a594f1a7e6d04d

(x86/mm: Move LDT remap out of KASLR region on 5-level paging).

After backing-out this one commit, I have successfully built and booted 4.19.5, 4.19.10 and 4.20-rc7 (I haven't bothered trying other versions). (The VM is currently running my patched 4.19.10 without any apparent problem.)

Notes: all 4.19.* builds are of Gentoo's "gentoo-sources" tree (which include standard Gentoo patches), plus wireguard; the 4.20-rc7 build was unpatched. I have been successfully running a different build of each 4.19.* version on my laptop (with many more device drivers enabled), so the problem is unlikely to be due to the build toolchain (which is common to both of my build trees).

Let me know if there is more information that you would find helpful, or if you have patches that you'd like me to test.

--Ken Pizzini

#1 lore raw
Quoted 32 lines · Ken Pizzini

Since 4.19.5 I have not been able to boot kernels on my Xen-hosted VM on a system with an Intel Xeon L5520 processor (microcode 0x1d).

4.19.4 worked fine; I've tried kernels 4.19.5, 4.19.6, 4.19.7 4.19.9, 4.19.10, 4.20-rc7, and they all throw:

     BUG: unable to handle kernel paging request at ffff88903fffc000
     PGD 1c0c067 P4D 1c0c067 PUD 0
     Oops: 0000 [#1] PREEMPT SMP NOPTI
     ... [register dump and call trace omitted, since I believe I located the
          offending source code]
     Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
     Kernel Offset: disabled

early in the system boot (fine details might differ; I did not carefully record the result of each test).

I finally had time to do some bisection, and the problem traces back to commit

    d52888aa2753e3063a9d3a0c9f72f94aa9809c15
    in tree fbbb33771ac6c392caeb283163a594f1a7e6d04d

(x86/mm: Move LDT remap out of KASLR region on 5-level paging).

After backing-out this one commit, I have successfully built and booted 4.19.5, 4.19.10 and 4.20-rc7 (I haven't bothered trying other versions). (The VM is currently running my patched 4.19.10 without any apparent problem.)

Notes: all 4.19.* builds are of Gentoo's "gentoo-sources" tree (which include standard Gentoo patches), plus wireguard; the 4.20-rc7 build was unpatched. I have been successfully running a different build of each 4.19.* version on my laptop (with many more device drivers enabled), so the problem is unlikely to be due to the build toolchain (which is common to both of my build trees).

Quoted 4 lines

Let me know if there is more information that you would find helpful, or if you have patches that you'd like me to test.

--Ken Pizzini

This is addressed by https://lkml.org/lkml/2018/12/11/266 but has not been merged yet.

(Next time for Xen issues please copy [email protected])

-boris

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#2 lore raw
In reply to Ken Pizzini
Quoted 32 lines · Ken Pizzini

Since 4.19.5 I have not been able to boot kernels on my Xen-hosted VM on a system with an Intel Xeon L5520 processor (microcode 0x1d).

4.19.4 worked fine; I've tried kernels 4.19.5, 4.19.6, 4.19.7 4.19.9, 4.19.10, 4.20-rc7, and they all throw:

     BUG: unable to handle kernel paging request at ffff88903fffc000
     PGD 1c0c067 P4D 1c0c067 PUD 0
     Oops: 0000 [#1] PREEMPT SMP NOPTI
     ... [register dump and call trace omitted, since I believe I located the
          offending source code]
     Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
     Kernel Offset: disabled

early in the system boot (fine details might differ; I did not carefully record the result of each test).

I finally had time to do some bisection, and the problem traces back to commit

    d52888aa2753e3063a9d3a0c9f72f94aa9809c15
    in tree fbbb33771ac6c392caeb283163a594f1a7e6d04d

(x86/mm: Move LDT remap out of KASLR region on 5-level paging).

After backing-out this one commit, I have successfully built and booted 4.19.5, 4.19.10 and 4.20-rc7 (I haven't bothered trying other versions). (The VM is currently running my patched 4.19.10 without any apparent problem.)

Notes: all 4.19.* builds are of Gentoo's "gentoo-sources" tree (which include standard Gentoo patches), plus wireguard; the 4.20-rc7 build was unpatched. I have been successfully running a different build of each 4.19.* version on my laptop (with many more device drivers enabled), so the problem is unlikely to be due to the build toolchain (which is common to both of my build trees).

Quoted 4 lines

Let me know if there is more information that you would find helpful, or if you have patches that you'd like me to test.

--Ken Pizzini

This is addressed by https://lkml.org/lkml/2018/12/11/266 but has not been merged yet.

(Next time for Xen issues please copy [email protected])

-boris

#3 lore raw
Quoted 2 lines · Boris Ostrovsky

This is addressed by https://lkml.org/lkml/2018/12/11/266 but has not been merged yet.

Confirmed: applying the patch in that posting to my Gentoo sys-kernel/gentoo-sources-4.19.10 tree results in a working system for me.

Thanks,
--Ken Pizzini