Skip to contentSkip to conversation

dt-bindings: remoteproc: qcom: Introduce shutdown-ack irq for Q6V5

PATCH Superseded Sibi Sankar 3 participants 7 messages Dec 24, 2018 – Jan 8, 2019

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/4 dt-bindings: remoteproc: qcom: Introduce shutdown-ack irq for Q6V5

Introduce shutdown-irq binding required for sysmon shutdown for Q6V5 MSS on SDM845/MSM8996 SoCs and for WCSS Q6V5 on QCS404 SoC.

---

v2:
Make shutdown-ack mandatory for MSS on SDM845/MSM8996 and for WCSS on QCS404 (Dropping Rob's reviewed-by due to this)

 .../bindings/remoteproc/qcom,adsp.txt           | 17 ++++++++++++++---
 .../bindings/remoteproc/qcom,q6v5.txt           | 15 ++++++++++++---
 2 files changed, 26 insertions(+), 6 deletions(-)
Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt +14 -3
index 9c0cff3a5ed8..50df9936763b 100644
@@ -19,13 +19,24 @@ on the Qualcomm ADSP Hexagon core.
 - interrupts-extended:
 	Usage: required
 	Value type: <prop-encoded-array>
-	Definition: must list the watchdog, fatal IRQs ready, handover and
-		    stop-ack IRQs
+	Definition: reference to the interrupts that match interrupt-names
 
 - interrupt-names:
 	Usage: required
 	Value type: <stringlist>
-	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
+	Definition: The interrupts needed depends on the compatible
+		    string:
+	qcom,msm8974-adsp-pil:
+	qcom,msm8996-adsp-pil:
+	qcom,msm8996-slpi-pil:
+	qcom,qcs404-adsp-pas:
+	qcom,qcs404-cdsp-pas:
+	qcom,sdm845-adsp-pas:
+	qcom,sdm845-cdsp-pas:
+		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
+	qcom,qcs404-wcss-pas:
+		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
+		    "shutdown-ack"
 
 - clocks:
 	Usage: required
Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +12 -3
index 5d0b2975387e..cacbdd368fe1 100644
@@ -28,13 +28,22 @@ on the Qualcomm Hexagon core.
 - interrupts-extended:
 	Usage: required
 	Value type: <prop-encoded-array>
-	Definition: must list the watchdog, fatal IRQs ready, handover and
-		    stop-ack IRQs
+	Definition: reference to the interrupts that match interrupt-names
 
 - interrupt-names:
 	Usage: required
 	Value type: <stringlist>
-	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
+	Definition: The interrupts needed depends on the the compatible
+		    string:
+	qcom,q6v5-pil:
+	qcom,ipq8074-wcss-pil:
+	qcom,msm8916-mss-pil:
+	qcom,msm8974-mss-pil:
+		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
+	qcom,msm8996-mss-pil:
+	qcom,sdm845-mss-pil:
+		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
+		    "shutdown-ack"
 
 - clocks:
 	Usage: required
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#1 lore raw

PATCH v2 2/4 remoteproc: qcom: q6v5: Add shutdown-ack irq

Add shutdown-ack irq handling for Q6V5. This patch includes enabling shutdown-ack irq on those Q6V5 instances with "has_shutdown_irq" flag set and exposing Q6V5 state information to the sysmon instance which is required to ascertain graceful shutdown completion.

---

v2:
Move shutdown-irq get to Q6V5 from sysmon to handle -EPROBE_DEFER cases
Correct the shutdown-irq wait time to 10 * HZ

 drivers/remoteproc/qcom_common.h    |  7 ++--
 drivers/remoteproc/qcom_q6v5.c      | 53 +++++++++++++++++++++++++++++
 drivers/remoteproc/qcom_q6v5.h      |  5 +++
 drivers/remoteproc/qcom_q6v5_adsp.c |  3 +-
 drivers/remoteproc/qcom_q6v5_mss.c  |  3 +-
 drivers/remoteproc/qcom_q6v5_pas.c  |  3 +-
 drivers/remoteproc/qcom_sysmon.c    |  6 +++-
 drivers/remoteproc/qcom_wcnss.c     |  3 +-
 8 files changed, 76 insertions(+), 7 deletions(-)
drivers/remoteproc/qcom_common.h +5 -2
index 58de71e4781c..d938b09ad02c 100644
@@ -7,6 +7,7 @@
 #include <linux/soc/qcom/qmi.h>
 
 struct qcom_sysmon;
+struct qcom_q6v5;
 
 struct qcom_rproc_glink {
 	struct rproc_subdev subdev;
@@ -45,12 +46,14 @@ void qcom_remove_ssr_subdev(struct rproc *rproc, struct qcom_rproc_ssr *ssr);
 #if IS_ENABLED(CONFIG_QCOM_SYSMON)
 struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
 					   const char *name,
-					   int ssctl_instance);
+					   int ssctl_instance,
+					   struct qcom_q6v5 *q6v5);
 void qcom_remove_sysmon_subdev(struct qcom_sysmon *sysmon);
 #else
 static inline struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
 							 const char *name,
-							 int ssctl_instance)
+							 int ssctl_instance,
+							 struct qcom_q6v5 *q6v5)
 {
 	return NULL;
 }
drivers/remoteproc/qcom_q6v5.c +53 -0

77 lines not on this page · raw message

drivers/remoteproc/qcom_q6v5.h +5 -0
index 7ac92c1e0f49..5cbaf2564c3a 100644
@@ -21,11 +21,15 @@ struct qcom_q6v5 {
 	int ready_irq;
 	int handover_irq;
 	int stop_irq;
+	int shutdown_irq;
+
+	u8 has_shutdown_irq;
 
 	bool handover_issued;
 
 	struct completion start_done;
 	struct completion stop_done;
+	struct completion shutdown_done;
 
 	int crash_reason;
 
@@ -42,5 +46,6 @@ int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5);
 int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5);
 int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5);
 int qcom_q6v5_wait_for_start(struct qcom_q6v5 *q6v5, int timeout);
+int qcom_q6v5_wait_for_shutdown(struct qcom_q6v5 *q6v5, int timeout);
 
 #endif
drivers/remoteproc/qcom_q6v5_adsp.c +2 -1
index 79374d1de311..5fc42d38a1cd 100644
@@ -438,7 +438,8 @@ static int adsp_probe(struct platform_device *pdev)
 	qcom_add_ssr_subdev(rproc, &adsp->ssr_subdev, desc->ssr_name);
 	adsp->sysmon = qcom_add_sysmon_subdev(rproc,
 					      desc->sysmon_name,
-					      desc->ssctl_id);
+					      desc->ssctl_id,
+					      &adsp->q6v5);
 
 	ret = rproc_add(rproc);
 	if (ret)
drivers/remoteproc/qcom_q6v5_mss.c +2 -1
index 01be7314e176..3bc2dec85928 100644
@@ -1340,7 +1340,8 @@ static int q6v5_probe(struct platform_device *pdev)
 	qcom_add_glink_subdev(rproc, &qproc->glink_subdev);
 	qcom_add_smd_subdev(rproc, &qproc->smd_subdev);
 	qcom_add_ssr_subdev(rproc, &qproc->ssr_subdev, "mpss");
-	qproc->sysmon = qcom_add_sysmon_subdev(rproc, "modem", 0x12);
+	qproc->sysmon = qcom_add_sysmon_subdev(rproc, "modem", 0x12,
+					       &qproc->q6v5);
 
 	ret = rproc_add(rproc);
 	if (ret)
drivers/remoteproc/qcom_q6v5_pas.c +2 -1
index b1e63fcd5fdf..920a39ea6609 100644
@@ -303,7 +303,8 @@ static int adsp_probe(struct platform_device *pdev)
 	qcom_add_ssr_subdev(rproc, &adsp->ssr_subdev, desc->ssr_name);
 	adsp->sysmon = qcom_add_sysmon_subdev(rproc,
 					      desc->sysmon_name,
-					      desc->ssctl_id);
+					      desc->ssctl_id,
+					      &adsp->q6v5);
 
 	ret = rproc_add(rproc);
 	if (ret)
drivers/remoteproc/qcom_sysmon.c +5 -1
index e976a602b015..c0d6ee8de995 100644
@@ -14,12 +14,14 @@
 #include <linux/rpmsg.h>
 
 #include "qcom_common.h"
+#include "qcom_q6v5.h"
 
 static BLOCKING_NOTIFIER_HEAD(sysmon_notifiers);
 
 struct qcom_sysmon {
 	struct rproc_subdev subdev;
 	struct rproc *rproc;
+	struct qcom_q6v5 *q6v5;
 
 	struct list_head node;
 
@@ -442,7 +444,8 @@ static int sysmon_notify(struct notifier_block *nb, unsigned long event,
  */
 struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
 					   const char *name,
-					   int ssctl_instance)
+					   int ssctl_instance,
+					   struct qcom_q6v5 *q6v5)
 {
 	struct qcom_sysmon *sysmon;
 	int ret;
@@ -456,6 +459,7 @@ struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
 
 	sysmon->name = name;
 	sysmon->ssctl_instance = ssctl_instance;
+	sysmon->q6v5 = q6v5;
 
 	init_completion(&sysmon->comp);
 	mutex_init(&sysmon->lock);
drivers/remoteproc/qcom_wcnss.c +2 -1
index b0e07e9f42d5..af13cade35da 100644
@@ -552,7 +552,8 @@ static int wcnss_probe(struct platform_device *pdev)
 	}
 
 	qcom_add_smd_subdev(rproc, &wcnss->smd_subdev);
-	wcnss->sysmon = qcom_add_sysmon_subdev(rproc, "wcnss", WCNSS_SSCTL_ID);
+	wcnss->sysmon = qcom_add_sysmon_subdev(rproc, "wcnss", WCNSS_SSCTL_ID,
+					       NULL);
 
 	ret = rproc_add(rproc);
 	if (ret)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#2 lore raw

PATCH v2 3/4 remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown

In reply to Sibi Sankar

After sending a sysmon shutdown request to the SSCTL service on the subsystem, wait for the service to send shutdown-ack interrupt or an indication message to signal the completion of graceful shutdown.

---
 drivers/remoteproc/qcom_sysmon.c | 40 +++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)
drivers/remoteproc/qcom_sysmon.c +39 -1
index c0d6ee8de995..0da83638ca99 100644
@@ -36,6 +36,7 @@ struct qcom_sysmon {
 
 	struct rpmsg_endpoint *ept;
 	struct completion comp;
+	struct completion ind_comp;
 	struct mutex lock;
 
 	bool ssr_ack;
@@ -139,6 +140,7 @@ static int sysmon_callback(struct rpmsg_device *rpdev, void *data, int count,
 }
 
 #define SSCTL_SHUTDOWN_REQ		0x21
+#define SSCTL_SHUTDOWN_READY_IND	0x21
 #define SSCTL_SUBSYS_EVENT_REQ		0x23
 
 #define SSCTL_MAX_MSG_LEN		7
@@ -254,6 +256,29 @@ static struct qmi_elem_info ssctl_subsys_event_resp_ei[] = {
 	{}
 };
 
+static struct qmi_elem_info ssctl_shutdown_ind_ei[] = {
+	{}
+};
+
+static void sysmon_ind_cb(struct qmi_handle *qmi, struct sockaddr_qrtr *sq,
+			  struct qmi_txn *txn, const void *data)
+{
+	struct qcom_sysmon *sysmon = container_of(qmi, struct qcom_sysmon, qmi);
+
+	complete(&sysmon->ind_comp);
+}
+
+static struct qmi_msg_handler qmi_indication_handler[] = {
+	{
+		.type = QMI_INDICATION,
+		.msg_id = SSCTL_SHUTDOWN_READY_IND,
+		.ei = ssctl_shutdown_ind_ei,
+		.decoded_size = 0,
+		.fn = sysmon_ind_cb
+	},
+	{}
+};
+
 /**
  * ssctl_request_shutdown() - request shutdown via SSCTL QMI service
  * @sysmon:	sysmon context
@@ -264,6 +289,7 @@ static void ssctl_request_shutdown(struct qcom_sysmon *sysmon)
 	struct qmi_txn txn;
 	int ret;
 
+	reinit_completion(&sysmon->ind_comp);
 	ret = qmi_txn_init(&sysmon->qmi, &txn, ssctl_shutdown_resp_ei, &resp);
 	if (ret < 0) {
 		dev_err(sysmon->dev, "failed to allocate QMI txn\n");
@@ -285,6 +311,16 @@ static void ssctl_request_shutdown(struct qcom_sysmon *sysmon)
 		dev_err(sysmon->dev, "shutdown request failed\n");
 	else
 		dev_dbg(sysmon->dev, "shutdown request completed\n");
+
+	if (sysmon->q6v5) {
+		ret = qcom_q6v5_wait_for_shutdown(sysmon->q6v5, 10 * HZ);
+		if (ret) {
+			ret = try_wait_for_completion(&sysmon->ind_comp);
+			if (!ret)
+				dev_err(sysmon->dev,
+					"timeout waiting for shutdown ack\n");
+		}
+	}
 }
 
 /**
@@ -462,9 +498,11 @@ struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
 	sysmon->q6v5 = q6v5;
 
 	init_completion(&sysmon->comp);
+	init_completion(&sysmon->ind_comp);
 	mutex_init(&sysmon->lock);
 
-	ret = qmi_handle_init(&sysmon->qmi, SSCTL_MAX_MSG_LEN, &ssctl_ops, NULL);
+	ret = qmi_handle_init(&sysmon->qmi, SSCTL_MAX_MSG_LEN, &ssctl_ops,
+			      qmi_indication_handler);
 	if (ret < 0) {
 		dev_err(sysmon->dev, "failed to initialize qmi handle\n");
 		kfree(sysmon);
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#5 lore raw

PATCH v2 4/4 remoteproc: qcom: Enable shutdown-ack irq on Q6V5

In reply to Sibi Sankar

Enable shutdown-ack irq handling for MSS Q6V5 on SDM845/MSM8996 SoCs and for WCSS Q6V5 on QCS404 SoC.

---
 drivers/remoteproc/qcom_q6v5_mss.c | 11 ++++++++---
 drivers/remoteproc/qcom_q6v5_pas.c |  9 +++++++--
 2 files changed, 15 insertions(+), 5 deletions(-)
drivers/remoteproc/qcom_q6v5_mss.c +8 -3
index 3bc2dec85928..fdb18d1ea177 100644
@@ -134,6 +134,7 @@ struct rproc_hexagon_res {
 	int version;
 	bool need_mem_protection;
 	bool has_alt_reset;
+	u8 has_shutdown_irq;
 };
 
 struct q6v5 {
@@ -1252,6 +1253,7 @@ static int q6v5_probe(struct platform_device *pdev)
 {
 	const struct rproc_hexagon_res *desc;
 	struct q6v5 *qproc;
+	struct qcom_q6v5 *q6v5;
 	struct rproc *rproc;
 	int ret;
 
@@ -1273,6 +1275,7 @@ static int q6v5_probe(struct platform_device *pdev)
 	qproc->dev = &pdev->dev;
 	qproc->rproc = rproc;
 	platform_set_drvdata(pdev, qproc);
+	q6v5 = &qproc->q6v5;
 
 	ret = q6v5_init_mem(qproc, pdev);
 	if (ret)
@@ -1330,7 +1333,8 @@ static int q6v5_probe(struct platform_device *pdev)
 	qproc->version = desc->version;
 	qproc->need_mem_protection = desc->need_mem_protection;
 
-	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM,
+	q6v5->has_shutdown_irq = desc->has_shutdown_irq;
+	ret = qcom_q6v5_init(q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM,
 			     qcom_msa_handover);
 	if (ret)
 		goto free_rproc;
@@ -1340,8 +1344,7 @@ static int q6v5_probe(struct platform_device *pdev)
 	qcom_add_glink_subdev(rproc, &qproc->glink_subdev);
 	qcom_add_smd_subdev(rproc, &qproc->smd_subdev);
 	qcom_add_ssr_subdev(rproc, &qproc->ssr_subdev, "mpss");
-	qproc->sysmon = qcom_add_sysmon_subdev(rproc, "modem", 0x12,
-					       &qproc->q6v5);
+	qproc->sysmon = qcom_add_sysmon_subdev(rproc, "modem", 0x12, q6v5);
 
 	ret = rproc_add(rproc);
 	if (ret)
@@ -1391,6 +1394,7 @@ static const struct rproc_hexagon_res sdm845_mss = {
 	},
 	.need_mem_protection = true,
 	.has_alt_reset = true,
+	.has_shutdown_irq = true,
 	.version = MSS_SDM845,
 };
 
@@ -1410,6 +1414,7 @@ static const struct rproc_hexagon_res msm8996_mss = {
 	},
 	.need_mem_protection = true,
 	.has_alt_reset = false,
+	.has_shutdown_irq = true,
 	.version = MSS_MSM8996,
 };
 
drivers/remoteproc/qcom_q6v5_pas.c +7 -2
index 920a39ea6609..2d6ff59575cd 100644
@@ -43,6 +43,7 @@ struct adsp_data {
 	const char *ssr_name;
 	const char *sysmon_name;
 	int ssctl_id;
+	u8 has_shutdown_irq;
 };
 
 struct qcom_adsp {
@@ -257,6 +258,7 @@ static int adsp_probe(struct platform_device *pdev)
 {
 	const struct adsp_data *desc;
 	struct qcom_adsp *adsp;
+	struct qcom_q6v5 *q6v5;
 	struct rproc *rproc;
 	int ret;
 
@@ -280,6 +282,7 @@ static int adsp_probe(struct platform_device *pdev)
 	adsp->pas_id = desc->pas_id;
 	adsp->has_aggre2_clk = desc->has_aggre2_clk;
 	platform_set_drvdata(pdev, adsp);
+	q6v5 = &adsp->q6v5;
 
 	ret = adsp_alloc_memory_region(adsp);
 	if (ret)
@@ -293,7 +296,8 @@ static int adsp_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_rproc;
 
-	ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem,
+	q6v5->has_shutdown_irq = desc->has_shutdown_irq;
+	ret = qcom_q6v5_init(q6v5, pdev, rproc, desc->crash_reason_smem,
 			     qcom_pas_handover);
 	if (ret)
 		goto free_rproc;
@@ -304,7 +308,7 @@ static int adsp_probe(struct platform_device *pdev)
 	adsp->sysmon = qcom_add_sysmon_subdev(rproc,
 					      desc->sysmon_name,
 					      desc->ssctl_id,
-					      &adsp->q6v5);
+					      q6v5);
 
 	ret = rproc_add(rproc);
 	if (ret)
@@ -366,6 +370,7 @@ static const struct adsp_data slpi_resource_init = {
 static const struct adsp_data wcss_resource_init = {
 	.crash_reason_smem = 421,
 	.firmware_name = "wcnss.mdt",
+	.has_shutdown_irq = true,
 	.pas_id = 6,
 	.ssr_name = "mpss",
 	.sysmon_name = "wcnss",
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
maintainer Reviewed-by on v2 1/4
#6 lore raw
In reply to Sibi Sankar
Quoted 6 lines · Sibi Sankar

Introduce shutdown-irq binding required for sysmon shutdown for Q6V5 MSS on SDM845/MSM8996 SoCs and for WCSS Q6V5 on QCS404 SoC.

---

Quoted 8 lines

v2:
Make shutdown-ack mandatory for MSS on SDM845/MSM8996 and for WCSS on QCS404 (Dropping Rob's reviewed-by due to this)

 .../bindings/remoteproc/qcom,adsp.txt           | 17 ++++++++++++++---
 .../bindings/remoteproc/qcom,q6v5.txt           | 15 ++++++++++++---
 2 files changed, 26 insertions(+), 6 deletions(-)
#3 lore raw

Re: [PATCH v2 3/4] remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown

In reply to Sibi Sankar
Quoted 5 lines · Sibi Sankar

After sending a sysmon shutdown request to the SSCTL service on the subsystem, wait for the service to send shutdown-ack interrupt or an indication message to signal the completion of graceful shutdown.

I prefer something closer to v1, where you kept the handling of the interrupt within the sysmon driver.

What I didn't like was the fact that you resolved the mss platform_device to get to the irq, not that you grabbed the irq from the parent's DT node from within the sysmon device.

You can get the remoteproc's DT node by rproc->dev.parent->of_node and use of_irq_get_byname() to get an irq number, which you can request in the sysmon device - which will work regardless of the remoteproc driver being a platform_driver or something else.

All the logic looks sound, but by shuffling things around we should get less coupling of the implementation (DT binding looks good).

Regards,
Bjorn

Quoted 96 lines
---
 drivers/remoteproc/qcom_sysmon.c | 40 +++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)
drivers/remoteproc/qcom_sysmon.c +39 -1
index c0d6ee8de995..0da83638ca99 100644
@@ -36,6 +36,7 @@ struct qcom_sysmon {
 
 	struct rpmsg_endpoint *ept;
 	struct completion comp;
+	struct completion ind_comp;
 	struct mutex lock;
 
 	bool ssr_ack;
@@ -139,6 +140,7 @@ static int sysmon_callback(struct rpmsg_device *rpdev, void *data, int count,
 }
 
 #define SSCTL_SHUTDOWN_REQ		0x21
+#define SSCTL_SHUTDOWN_READY_IND	0x21
 #define SSCTL_SUBSYS_EVENT_REQ		0x23
 
 #define SSCTL_MAX_MSG_LEN		7
@@ -254,6 +256,29 @@ static struct qmi_elem_info ssctl_subsys_event_resp_ei[] = {
 	{}
 };
 
+static struct qmi_elem_info ssctl_shutdown_ind_ei[] = {
+	{}
+};
+
+static void sysmon_ind_cb(struct qmi_handle *qmi, struct sockaddr_qrtr *sq,
+			  struct qmi_txn *txn, const void *data)
+{
+	struct qcom_sysmon *sysmon = container_of(qmi, struct qcom_sysmon, qmi);
+
+	complete(&sysmon->ind_comp);
+}
+
+static struct qmi_msg_handler qmi_indication_handler[] = {
+	{
+		.type = QMI_INDICATION,
+		.msg_id = SSCTL_SHUTDOWN_READY_IND,
+		.ei = ssctl_shutdown_ind_ei,
+		.decoded_size = 0,
+		.fn = sysmon_ind_cb
+	},
+	{}
+};
+
 /**
  * ssctl_request_shutdown() - request shutdown via SSCTL QMI service
  * @sysmon:	sysmon context
@@ -264,6 +289,7 @@ static void ssctl_request_shutdown(struct qcom_sysmon *sysmon)
 	struct qmi_txn txn;
 	int ret;
 
+	reinit_completion(&sysmon->ind_comp);
 	ret = qmi_txn_init(&sysmon->qmi, &txn, ssctl_shutdown_resp_ei, &resp);
 	if (ret < 0) {
 		dev_err(sysmon->dev, "failed to allocate QMI txn\n");
@@ -285,6 +311,16 @@ static void ssctl_request_shutdown(struct qcom_sysmon *sysmon)
 		dev_err(sysmon->dev, "shutdown request failed\n");
 	else
 		dev_dbg(sysmon->dev, "shutdown request completed\n");
+
+	if (sysmon->q6v5) {
+		ret = qcom_q6v5_wait_for_shutdown(sysmon->q6v5, 10 * HZ);
+		if (ret) {
+			ret = try_wait_for_completion(&sysmon->ind_comp);
+			if (!ret)
+				dev_err(sysmon->dev,
+					"timeout waiting for shutdown ack\n");
+		}
+	}
 }
 
 /**
@@ -462,9 +498,11 @@ struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
 	sysmon->q6v5 = q6v5;
 
 	init_completion(&sysmon->comp);
+	init_completion(&sysmon->ind_comp);
 	mutex_init(&sysmon->lock);
 
-	ret = qmi_handle_init(&sysmon->qmi, SSCTL_MAX_MSG_LEN, &ssctl_ops, NULL);
+	ret = qmi_handle_init(&sysmon->qmi, SSCTL_MAX_MSG_LEN, &ssctl_ops,
+			      qmi_indication_handler);
 	if (ret < 0) {
 		dev_err(sysmon->dev, "failed to initialize qmi handle\n");
 		kfree(sysmon);
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#4 lore raw

Re: [PATCH v2 3/4] remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown

Hi Bjorn,
Thanks for the review!

Quoted 16 lines · Bjorn Andersson
Quoted 5 lines · Sibi Sankar

After sending a sysmon shutdown request to the SSCTL service on the subsystem, wait for the service to send shutdown-ack interrupt or an indication message to signal the completion of graceful shutdown.

I prefer something closer to v1, where you kept the handling of the interrupt within the sysmon driver.

What I didn't like was the fact that you resolved the mss platform_device to get to the irq, not that you grabbed the irq from the parent's DT node from within the sysmon device.

Quoted 8 lines

You can get the remoteproc's DT node by rproc->dev.parent->of_node and use of_irq_get_byname() to get an irq number, which you can request in the sysmon device - which will work regardless of the remoteproc driver being a platform_driver or something else.

All the logic looks sound, but by shuffling things around we should get less coupling of the implementation (DT binding looks good).

will make it closer to v1 in the next re-spin

Quoted 109 lines

Regards,
Bjorn

Quoted 106 lines
---
 drivers/remoteproc/qcom_sysmon.c | 40 
+++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)
drivers/remoteproc/qcom_sysmon.c +2 -0
index c0d6ee8de995..0da83638ca99 100644
@@ -36,6 +36,7 @@ struct qcom_sysmon {
 
 	struct rpmsg_endpoint *ept;
 	struct completion comp;
+	struct completion ind_comp;
 	struct mutex lock;
 
 	bool ssr_ack;
@@ -139,6 +140,7 @@ static int sysmon_callback(struct rpmsg_device 
 *rpdev, void *data, int count,
 }
 
 #define SSCTL_SHUTDOWN_REQ		0x21
+#define SSCTL_SHUTDOWN_READY_IND	0x21
 #define SSCTL_SUBSYS_EVENT_REQ		0x23
 

#define SSCTL_MAX_MSG_LEN 7

drivers/remoteproc/qcom_sysmon.c +23 -0
@@ -254,6 +256,29 @@ static struct qmi_elem_info 
 ssctl_subsys_event_resp_ei[] = {
 	{}
 };
 
+static struct qmi_elem_info ssctl_shutdown_ind_ei[] = {
+	{}
+};
+
+static void sysmon_ind_cb(struct qmi_handle *qmi, struct 
 sockaddr_qrtr *sq,
+			  struct qmi_txn *txn, const void *data)
+{
+	struct qcom_sysmon *sysmon = container_of(qmi, struct qcom_sysmon, 
 qmi);
+
+	complete(&sysmon->ind_comp);
+}
+
+static struct qmi_msg_handler qmi_indication_handler[] = {
+	{
+		.type = QMI_INDICATION,
+		.msg_id = SSCTL_SHUTDOWN_READY_IND,
+		.ei = ssctl_shutdown_ind_ei,
+		.decoded_size = 0,
+		.fn = sysmon_ind_cb
+	},
+	{}
+};
+

/**
* ssctl_request_shutdown() - request shutdown via SSCTL QMI service
* @sysmon: sysmon context

drivers/remoteproc/qcom_sysmon.c +1 -0
@@ -264,6 +289,7 @@ static void ssctl_request_shutdown(struct 
 qcom_sysmon *sysmon)
 	struct qmi_txn txn;
 	int ret;
 
+	reinit_completion(&sysmon->ind_comp);
 	ret = qmi_txn_init(&sysmon->qmi, &txn, ssctl_shutdown_resp_ei, 
 &resp);
drivers/remoteproc/qcom_sysmon.c +10 -0
 	if (ret < 0) {
 		dev_err(sysmon->dev, "failed to allocate QMI txn\n");
@@ -285,6 +311,16 @@ static void ssctl_request_shutdown(struct 
 qcom_sysmon *sysmon)
 		dev_err(sysmon->dev, "shutdown request failed\n");
 	else
 		dev_dbg(sysmon->dev, "shutdown request completed\n");
+
+	if (sysmon->q6v5) {
+		ret = qcom_q6v5_wait_for_shutdown(sysmon->q6v5, 10 * HZ);
+		if (ret) {
+			ret = try_wait_for_completion(&sysmon->ind_comp);
+			if (!ret)
+				dev_err(sysmon->dev,
+					"timeout waiting for shutdown ack\n");
+		}
+	}
 }
 

/**

drivers/remoteproc/qcom_sysmon.c +3 -1
@@ -462,9 +498,11 @@ struct qcom_sysmon *qcom_add_sysmon_subdev(struct 
 rproc *rproc,
 	sysmon->q6v5 = q6v5;
 
 	init_completion(&sysmon->comp);
+	init_completion(&sysmon->ind_comp);
 	mutex_init(&sysmon->lock);
 
-	ret = qmi_handle_init(&sysmon->qmi, SSCTL_MAX_MSG_LEN, &ssctl_ops, 
 NULL);
+	ret = qmi_handle_init(&sysmon->qmi, SSCTL_MAX_MSG_LEN, &ssctl_ops,
+			      qmi_indication_handler);
 	if (ret < 0) {
drivers/remoteproc/qcom_sysmon.c +0 -1
 		dev_err(sysmon->dev, "failed to initialize qmi handle\n");
 		kfree(sysmon);
--

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

Signature · 3 lines
-- Sibi Sankar --
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.