dt-bindings: soc: qcom: Add remote-pid binding for GLINK SMEM

index 0b8cc533ca83..587bb1ddc8cc 100644
@@ -21,6 +21,11 @@ edge.
 	Definition: should specify the IRQ used by the remote processor to
 		    signal this processor about communication related events
 
+- qcom,remote-pid:
+	Usage: required for glink-smem
+	Value type: <u32>
+	Definition: specifies the identifier of the remote endpoint of this edge
+
 - qcom,rpm-msg-ram:
 	Usage: required for glink-rpm
 	Value type: <prop-encoded-array>

index 9ff5b0309417..d645c8db29fd 100644
@@ -39,13 +39,21 @@ on the Qualcomm Hexagon core.
 - clocks:
 	Usage: required
 	Value type: <phandle>
-	Definition: reference to the iface, bus and mem clocks to be held on
-		    behalf of the booting of the Hexagon core
+	Definition: reference to the clocks that match clock-names
 
 - clock-names:
 	Usage: required
 	Value type: <stringlist>
-	Definition: must be "iface", "bus", "mem"
+	Definition: The clocks needed depend on the compatible string:
+	qcom,ipq8074-wcss-pil:
+		    no clock names required
+	qcom,q6v5-pil:
+	qcom,msm8916-mss-pil:
+	qcom,msm8974-mss-pil:
+		    must be "iface", "bus", "mem", "xo"
+	qcom,sdm845-mss-pil:
+		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
+		    "snoc_axi", "mnoc_axi", "prng"
 
 - resets:
 	Usage: required

index d645c8db29fd..bba3d6be71c0 100644
@@ -51,6 +51,9 @@ on the Qualcomm Hexagon core.
 	qcom,msm8916-mss-pil:
 	qcom,msm8974-mss-pil:
 		    must be "iface", "bus", "mem", "xo"
+	qcom,msm8996-mss-pil:
+		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
+		    "snoc_axi", "mnoc_axi", "pnoc", "qdss"
 	qcom,sdm845-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "prng"

index bba3d6be71c0..9db371da4897 100644
@@ -76,6 +76,19 @@ on the Qualcomm Hexagon core.
 		    must be "mss_restart", "pdc_reset" for the modem
 		    sub-system on SDM845 SoCs
 
+For the compatible strings below the following supplies are required:
+  "qcom,q6v5-pil"
+  "qcom,msm8916-mss-pil",
+- cx-supply:
+- mx-supply:
+- pll-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the regulators to be held on behalf of the
+		    booting of the Hexagon core
+
+For the compatible string below the following supplies are required:
+  "qcom,msm8974-mss-pil"
 - cx-supply:
 - mss-supply:
 - mx-supply:

@@ -85,6 +98,14 @@ on the Qualcomm Hexagon core.
 	Definition: reference to the regulators to be held on behalf of the
 		    booting of the Hexagon core
 
+For the compatible string below the following supplies are required:
+  "qcom,msm8996-mss-pil"
+- pll-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the regulators to be held on behalf of the
+		    booting of the Hexagon core
+
 - qcom,smem-states:
 	Usage: required
 	Value type: <phandle>

index 9db371da4897..36e91c9d76e0 100644
@@ -106,6 +106,25 @@ For the compatible string below the following supplies are required:
 	Definition: reference to the regulators to be held on behalf of the
 		    booting of the Hexagon core
 
+- power-domains:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to power-domains that match power-domain-names
+
+- power-domain-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: The power-domains needed depend on the compatible string:
+	qcom,q6v5-pil:
+	qcom,ipq8074-wcss-pil:
+	qcom,msm8916-mss-pil:
+	qcom,msm8974-mss-pil:
+		    no power-domain names required
+	qcom,msm8996-mss-pil:
+		    must be "cx", "mx"
+	qcom,sdm845-mss-pil:
+		    must be "cx", "mx", "mss", "load_state"
+
 - qcom,smem-states:
 	Usage: required
 	Value type: <phandle>

index 5da9fa1feb8a..db17216a5bce 100644
@@ -1366,6 +1366,66 @@
 			};
 		};
 
+		remoteproc@4080000 {
+			compatible = "qcom,sdm845-mss-pil";
+			reg = <0x04080000 0x408>, <0x04180000 0x48>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended =
+				<&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+				 <&gcc GCC_PRNG_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bus", "mem", "gpll0_mss",
+				      "snoc_axi", "mnoc_axi", "prng", "xo";
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+			reset-names = "mss_restart", "pdc_reset";
+
+			qcom,halt-regs = <&tcsr_mutex_regs
+						0x23000 0x25000 0x24000>;
+
+			power-domains = <&aoss_qmp_pd AOSS_QMP_LS_MODEM>,
+					<&rpmhpd SDM845_CX>,
+					<&rpmhpd SDM845_MX>,
+					<&rpmhpd SDM845_MSS>;
+			power-domain-names = "load_state", "cx", "mx", "mss";
+
+			mba {
+				memory-region = <&mba_region>;
+			};
+
+			mpss {
+				memory-region = <&mpss_region>;
+			};
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+				mbox-names = "mpss_smem";
+			};
+		};
+
 		usb_1_hsphy: phy@88e2000 {
 			compatible = "qcom,sdm845-qusb2-phy";
 			reg = <0x88e2000 0x400>;