Skip to contentSkip to conversation

ARM: pxa: remove raumfeld board files and defconfig

PATCH Applied Daniel Mack 2 participants 2 messages Jan 7, 2019 – Jan 9, 2019

Subsystems (3)
lore
Share & tools
lore

Daniel Mack

author maintainer
#0 lore raw

PATCH v2 1/1 ARM: pxa: remove raumfeld board files and defconfig

These boards are now fully ported to device-tree, so the old implementation can go away.

The defconfig needs downstream quirks anyway, so we can just remove it from mainline.

---
v1 → v2:

* Removed entries from arch/arm/configs/pxa_defconfig
* Rebased to v5.0-rc1

 arch/arm/configs/pxa_defconfig      |    4 -
 arch/arm/configs/raumfeld_defconfig |  197 -----
 arch/arm/mach-pxa/Kconfig           |   18 -
 arch/arm/mach-pxa/Makefile          |    3 -
 arch/arm/mach-pxa/raumfeld.c        | 1187 ---------------------------
 5 files changed, 1409 deletions(-)
 delete mode 100644 arch/arm/configs/raumfeld_defconfig
 delete mode 100644 arch/arm/mach-pxa/raumfeld.c
arch/arm/configs/pxa_defconfig +0 -4
index 6bb506edb1f5..e96a9743b220 100644
@@ -66,9 +66,6 @@ CONFIG_MACH_MIOA701=y
 CONFIG_PXA_EZX=y
 CONFIG_MACH_MP900C=y
 CONFIG_ARCH_PXA_PALM=y
-CONFIG_MACH_RAUMFELD_RC=y
-CONFIG_MACH_RAUMFELD_CONNECTOR=y
-CONFIG_MACH_RAUMFELD_SPEAKER=y
 CONFIG_PXA_SHARPSL=y
 CONFIG_MACH_POODLE=y
 CONFIG_MACH_CORGI=y
@@ -498,7 +495,6 @@ CONFIG_SND_PXA2XX_SOC_E800=m
 CONFIG_SND_PXA2XX_SOC_EM_X270=m
 CONFIG_SND_PXA2XX_SOC_PALM27X=y
 CONFIG_SND_SOC_ZYLONITE=m
-CONFIG_SND_SOC_RAUMFELD=m
 CONFIG_SND_PXA2XX_SOC_HX4700=m
 CONFIG_SND_PXA2XX_SOC_MAGICIAN=m
 CONFIG_SND_PXA2XX_SOC_MIOA701=m
arch/arm/configs/raumfeld_defconfig deleted +0 -197

197 lines not on this page · raw message

arch/arm/mach-pxa/Kconfig +0 -18
index b185794549be..b8c9eff3a7ba 100644
@@ -453,24 +453,6 @@ config MACH_TREO680
 	  Say Y here if you intend to run this kernel on Palm Treo 680
 	  smartphone.
 
-config MACH_RAUMFELD_RC
-	bool "Raumfeld Controller"
-	select CPU_PXA300
-	select POWER_SUPPLY
-	select PXA3xx
-
-config MACH_RAUMFELD_CONNECTOR
-	bool "Raumfeld Connector"
-	select CPU_PXA300
-	select POWER_SUPPLY
-	select PXA3xx
-
-config MACH_RAUMFELD_SPEAKER
-	bool "Raumfeld Speaker"
-	select CPU_PXA300
-	select POWER_SUPPLY
-	select PXA3xx
-
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 	select SHARP_PARAM
arch/arm/mach-pxa/Makefile +0 -3
index 0a8e9611052f..f70728930c4f 100644
@@ -86,9 +86,6 @@ obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
-obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
-obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
-obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
 obj-$(CONFIG_PXA_SYSTEMS_CPLDS)	+= pxa_cplds_irqs.o
arch/arm/mach-pxa/raumfeld.c deleted +0 -1187

1,187 lines not on this page · raw message

Signature · 7 lines
2.19.2


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
maintainer Applied
#1 lore raw
Quoted 7 lines · Daniel Mack

These boards are now fully ported to device-tree, so the old implementation can go away.

The defconfig needs downstream quirks anyway, so we can just remove it from mainline.

Applied to pxa/for-next, thanks.

Cheers.

--
Robert

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel