Skip to contentSkip to conversation

dt-bindings: remoteproc: qcom: Introduce shutdown-ack irq for Q6V5

PATCH New Sibi Sankar 1 participant 3 messages Jan 8, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/3 dt-bindings: remoteproc: qcom: Introduce shutdown-ack irq for Q6V5

Introduce shutdown-irq binding required for sysmon shutdown for Q6V5 MSS on SDM845/MSM8996 SoCs and for WCSS Q6V5 on QCS404 SoC.

---

v2:
* Make shutdown-ack mandatory for MSS on SDM845/MSM8996 and for WCSS on QCS404 (Dropping Rob's reviewed-by due to this)

 .../bindings/remoteproc/qcom,adsp.txt           | 17 ++++++++++++++---
 .../bindings/remoteproc/qcom,q6v5.txt           | 15 ++++++++++++---
 2 files changed, 26 insertions(+), 6 deletions(-)
Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt +14 -3
index 60ee0f73071a..292dfda9770d 100644
@@ -19,13 +19,24 @@ on the Qualcomm ADSP Hexagon core.
 - interrupts-extended:
 	Usage: required
 	Value type: <prop-encoded-array>
-	Definition: must list the watchdog, fatal IRQs ready, handover and
-		    stop-ack IRQs
+	Definition: reference to the interrupts that match interrupt-names
 
 - interrupt-names:
 	Usage: required
 	Value type: <stringlist>
-	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
+	Definition: The interrupts needed depends on the compatible
+		    string:
+	qcom,msm8974-adsp-pil:
+	qcom,msm8996-adsp-pil:
+	qcom,msm8996-slpi-pil:
+	qcom,qcs404-adsp-pas:
+	qcom,qcs404-cdsp-pas:
+	qcom,sdm845-adsp-pas:
+	qcom,sdm845-cdsp-pas:
+		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
+	qcom,qcs404-wcss-pas:
+		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
+		    "shutdown-ack"
 
 - firmware-name:
 	Usage: optional
Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +12 -3
index 401e49ebee39..41ca5df5be5a 100644
@@ -28,13 +28,22 @@ on the Qualcomm Hexagon core.
 - interrupts-extended:
 	Usage: required
 	Value type: <prop-encoded-array>
-	Definition: must list the watchdog, fatal IRQs ready, handover and
-		    stop-ack IRQs
+	Definition: reference to the interrupts that match interrupt-names
 
 - interrupt-names:
 	Usage: required
 	Value type: <stringlist>
-	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
+	Definition: The interrupts needed depends on the the compatible
+		    string:
+	qcom,q6v5-pil:
+	qcom,ipq8074-wcss-pil:
+	qcom,msm8916-mss-pil:
+	qcom,msm8974-mss-pil:
+		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
+	qcom,msm8996-mss-pil:
+	qcom,sdm845-mss-pil:
+		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
+		    "shutdown-ack"
 
 - firmware-name:
 	Usage: optional
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#1 lore raw

PATCH v3 2/3 remoteproc: qcom: Add shutdown-ack irq

Add shutdown-ack irq handling required for sysmon shutdown for Q6V5 MSS on SDM845/MSM8996 and for WCSS Q6V5 on QCS404 SoC.

---

v3:
* Move shutdown-irq handling back to sysmon and modify qcom_add_sysmon_subdev to handle -EPROBE_DEFER
* Dropped has_shutdown_irq flag

v2:
* Move shutdown-irq get to Q6V5 from sysmon to handle -EPROBE_DEFER cases

 drivers/remoteproc/qcom_common.h    | 16 +++++----
 drivers/remoteproc/qcom_q6v5_adsp.c |  9 +++--
 drivers/remoteproc/qcom_q6v5_mss.c  |  4 ++-
 drivers/remoteproc/qcom_q6v5_pas.c  |  9 +++--
 drivers/remoteproc/qcom_sysmon.c    | 52 +++++++++++++++++++++++++----
 drivers/remoteproc/qcom_wcnss.c     |  5 ++-
 6 files changed, 73 insertions(+), 22 deletions(-)
drivers/remoteproc/qcom_common.h +9 -7
index 58de71e4781c..afea598fdc9d 100644
@@ -43,16 +43,18 @@ void qcom_add_ssr_subdev(struct rproc *rproc, struct qcom_rproc_ssr *ssr,
 void qcom_remove_ssr_subdev(struct rproc *rproc, struct qcom_rproc_ssr *ssr);
 
 #if IS_ENABLED(CONFIG_QCOM_SYSMON)
-struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
-					   const char *name,
-					   int ssctl_instance);
+int qcom_add_sysmon_subdev(struct rproc *rproc,
+			   struct qcom_sysmon *rproc_sysmon,
+			   const char *name,
+			   int ssctl_instance);
 void qcom_remove_sysmon_subdev(struct qcom_sysmon *sysmon);
 #else
-static inline struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
-							 const char *name,
-							 int ssctl_instance)
+static inline int qcom_add_sysmon_subdev(struct rproc *rproc,
+					 struct qcom_sysmon *rproc_sysmon,
+					 const char *name,
+					 int ssctl_instance)
 {
-	return NULL;
+	return 0;
 }
 
 static inline void qcom_remove_sysmon_subdev(struct qcom_sysmon *sysmon)
drivers/remoteproc/qcom_q6v5_adsp.c +6 -3
index 79374d1de311..e1db2c7a08bd 100644
@@ -436,9 +436,12 @@ static int adsp_probe(struct platform_device *pdev)
 
 	qcom_add_glink_subdev(rproc, &adsp->glink_subdev);
 	qcom_add_ssr_subdev(rproc, &adsp->ssr_subdev, desc->ssr_name);
-	adsp->sysmon = qcom_add_sysmon_subdev(rproc,
-					      desc->sysmon_name,
-					      desc->ssctl_id);
+	ret = qcom_add_sysmon_subdev(rproc,
+				     adsp->sysmon,
+				     desc->sysmon_name,
+				     desc->ssctl_id);
+	if (ret)
+		goto disable_pm;
 
 	ret = rproc_add(rproc);
 	if (ret)
drivers/remoteproc/qcom_q6v5_mss.c +3 -1
index c86dc40cfb8c..7a256fdb2f64 100644
@@ -1340,7 +1340,9 @@ static int q6v5_probe(struct platform_device *pdev)
 	qcom_add_glink_subdev(rproc, &qproc->glink_subdev);
 	qcom_add_smd_subdev(rproc, &qproc->smd_subdev);
 	qcom_add_ssr_subdev(rproc, &qproc->ssr_subdev, "mpss");
-	qproc->sysmon = qcom_add_sysmon_subdev(rproc, "modem", 0x12);
+	ret = qcom_add_sysmon_subdev(rproc, qproc->sysmon, "modem", 0x12);
+	if (ret)
+		goto free_rproc;
 
 	ret = rproc_add(rproc);
 	if (ret)
drivers/remoteproc/qcom_q6v5_pas.c +6 -3
index b1e63fcd5fdf..942804b5fafa 100644
@@ -301,9 +301,12 @@ static int adsp_probe(struct platform_device *pdev)
 	qcom_add_glink_subdev(rproc, &adsp->glink_subdev);
 	qcom_add_smd_subdev(rproc, &adsp->smd_subdev);
 	qcom_add_ssr_subdev(rproc, &adsp->ssr_subdev, desc->ssr_name);
-	adsp->sysmon = qcom_add_sysmon_subdev(rproc,
-					      desc->sysmon_name,
-					      desc->ssctl_id);
+	ret = qcom_add_sysmon_subdev(rproc,
+				     adsp->sysmon,
+				     desc->sysmon_name,
+				     desc->ssctl_id);
+	if (ret)
+		goto free_rproc;
 
 	ret = rproc_add(rproc);
 	if (ret)
drivers/remoteproc/qcom_sysmon.c +45 -7

110 lines not on this page · raw message

drivers/remoteproc/qcom_wcnss.c +4 -1
index 1152da49a18a..920e85202c5e 100644
@@ -552,7 +552,10 @@ static int wcnss_probe(struct platform_device *pdev)
 	}
 
 	qcom_add_smd_subdev(rproc, &wcnss->smd_subdev);
-	wcnss->sysmon = qcom_add_sysmon_subdev(rproc, "wcnss", WCNSS_SSCTL_ID);
+	ret = qcom_add_sysmon_subdev(rproc, wcnss->sysmon,
+				     "wcnss", WCNSS_SSCTL_ID);
+	if (ret)
+		goto free_rproc;
 
 	ret = rproc_add(rproc);
 	if (ret)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#2 lore raw

PATCH v3 3/3 remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown

In reply to Sibi Sankar

After sending a sysmon shutdown request to the SSCTL service on the subsystem, wait for the service to send shutdown-ack interrupt or an indication message to signal the completion of graceful shutdown.

---

v2:
* Correct the shutdown-irq wait time to 10 * HZ

 drivers/remoteproc/qcom_sysmon.c | 42 +++++++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)
drivers/remoteproc/qcom_sysmon.c +41 -1
index b17727dfc271..19b732e1427d 100644
@@ -37,6 +37,7 @@ struct qcom_sysmon {
 
 	struct rpmsg_endpoint *ept;
 	struct completion comp;
+	struct completion ind_comp;
 	struct completion shutdown_comp;
 	struct mutex lock;
 
@@ -141,6 +142,7 @@ static int sysmon_callback(struct rpmsg_device *rpdev, void *data, int count,
 }
 
 #define SSCTL_SHUTDOWN_REQ		0x21
+#define SSCTL_SHUTDOWN_READY_IND	0x21
 #define SSCTL_SUBSYS_EVENT_REQ		0x23
 
 #define SSCTL_MAX_MSG_LEN		7
@@ -256,6 +258,29 @@ static struct qmi_elem_info ssctl_subsys_event_resp_ei[] = {
 	{}
 };
 
+static struct qmi_elem_info ssctl_shutdown_ind_ei[] = {
+	{}
+};
+
+static void sysmon_ind_cb(struct qmi_handle *qmi, struct sockaddr_qrtr *sq,
+			  struct qmi_txn *txn, const void *data)
+{
+	struct qcom_sysmon *sysmon = container_of(qmi, struct qcom_sysmon, qmi);
+
+	complete(&sysmon->ind_comp);
+}
+
+static struct qmi_msg_handler qmi_indication_handler[] = {
+	{
+		.type = QMI_INDICATION,
+		.msg_id = SSCTL_SHUTDOWN_READY_IND,
+		.ei = ssctl_shutdown_ind_ei,
+		.decoded_size = 0,
+		.fn = sysmon_ind_cb
+	},
+	{}
+};
+
 /**
  * ssctl_request_shutdown() - request shutdown via SSCTL QMI service
  * @sysmon:	sysmon context
@@ -266,6 +291,8 @@ static void ssctl_request_shutdown(struct qcom_sysmon *sysmon)
 	struct qmi_txn txn;
 	int ret;
 
+	reinit_completion(&sysmon->ind_comp);
+	reinit_completion(&sysmon->shutdown_comp);
 	ret = qmi_txn_init(&sysmon->qmi, &txn, ssctl_shutdown_resp_ei, &resp);
 	if (ret < 0) {
 		dev_err(sysmon->dev, "failed to allocate QMI txn\n");
@@ -287,6 +314,17 @@ static void ssctl_request_shutdown(struct qcom_sysmon *sysmon)
 		dev_err(sysmon->dev, "shutdown request failed\n");
 	else
 		dev_dbg(sysmon->dev, "shutdown request completed\n");
+
+	if (sysmon->shutdown_irq > 0) {
+		ret = wait_for_completion_timeout(&sysmon->shutdown_comp,
+						  10 * HZ);
+		if (!ret) {
+			ret = try_wait_for_completion(&sysmon->ind_comp);
+			if (!ret)
+				dev_err(sysmon->dev,
+					"timeout waiting for shutdown ack\n");
+		}
+	}
 }
 
 /**
@@ -473,6 +511,7 @@ int qcom_add_sysmon_subdev(struct rproc *rproc,
 	sysmon->ssctl_instance = ssctl_instance;
 
 	init_completion(&sysmon->comp);
+	init_completion(&sysmon->ind_comp);
 	init_completion(&sysmon->shutdown_comp);
 	mutex_init(&sysmon->lock);
 
@@ -497,7 +536,8 @@ int qcom_add_sysmon_subdev(struct rproc *rproc,
 		}
 	}
 
-	ret = qmi_handle_init(&sysmon->qmi, SSCTL_MAX_MSG_LEN, &ssctl_ops, NULL);
+	ret = qmi_handle_init(&sysmon->qmi, SSCTL_MAX_MSG_LEN, &ssctl_ops,
+			      qmi_indication_handler);
 	if (ret < 0) {
 		dev_err(sysmon->dev, "failed to initialize qmi handle\n");
 		kfree(sysmon);
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project