media: dvb/earth-pt1: fix wrong initialization for demod blocks

From: Akihiro Tsukada <[email protected]>

earth-pt1 driver was decomposed/restructured by the commit: b732539efdba ("media: dvb: earth-pt1: decompose pt1 driver into sub drivers"), but it introduced a problem regarding concurrent streaming:
Opening a new terrestial stream stops the reception of an existing, already-opened satellite stream.

The demod IC in earth-pt1 boards contains 2 pairs of terr. and sat. blocks, supporting 4 concurrent demodulations, and the above problem was because the config of a terr. block contained whole reset/init of the pair blocks, thus each open() of a terrestrial frontend wrongly cleared the config of its peer satellite block of the demod.
This whole/pair reset should be executed earlier and not on each open().

Fixes b732539efdba ("media: dvb: earth-pt1: decompose pt1 driver into sub drivers")

Signed-off-by Akihiro Tsukada <[email protected]>

---
 drivers/media/pci/pt1/pt1.c | 54 ++++++++++++++++++++++++++++++++-----
 1 file changed, 48 insertions(+), 6 deletions(-)

drivers/media/pci/pt1/pt1.c +27 -6

index f4b8030e236..403f88ee3d9 100644
@@ -200,16 +200,10 @@ static const u8 va1j5jf8007t_25mhz_configs[][2] = {
 static int config_demod(struct i2c_client *cl, enum pt1_fe_clk clk)
 {
 	int ret;
-	u8 buf[2] = {0x01, 0x80};
 	bool is_sat;
 	const u8 (*cfg_data)[2];
 	int i, len;
 
-	ret = i2c_master_send(cl, buf, 2);
-	if (ret < 0)
-		return ret;
-	usleep_range(30000, 50000);
-
 	is_sat = !strncmp(cl->name, TC90522_I2C_DEV_SAT,
 			  strlen(TC90522_I2C_DEV_SAT));
 	if (is_sat) {

@@ -260,6 +254,46 @@ static int config_demod(struct i2c_client *cl, enum pt1_fe_clk clk)
 	return 0;
 }
 
+/*
+ * Init registers for (each pair of) terrestrial/satellite block in demod.
+ * Note that resetting terr. block also resets its peer sat. block as well.
+ * This function must be called before configuring any demod block
+ * (before pt1_wakeup(), fe->ops.init()).
+ */
+static int pt1_demod_block_init(struct pt1 *pt1)
+{
+	struct i2c_client *cl;
+	u8 buf[2] = {0x01, 0x80};
+	int ret;
+	int i;
+
+	/* reset all terr. & sat. pairs first */
+	for (i = 0; i < PT1_NR_ADAPS; i++) {
+		cl = pt1->adaps[i]->demod_i2c_client;
+		if (strncmp(cl->name, TC90522_I2C_DEV_TER,
+			     strlen(TC90522_I2C_DEV_TER)))
+			continue;
+
+		ret = i2c_master_send(cl, buf, 2);
+		if (ret < 0)
+			return ret;
+		usleep_range(30000, 50000);
+	}
+
+	for (i = 0; i < PT1_NR_ADAPS; i++) {

drivers/media/pci/pt1/pt1.c +11 -0

+	return 0;
+}
+
 static void pt1_write_reg(struct pt1 *pt1, int reg, u32 data)
 {
 	writel(data, pt1->regs + reg * 4);

@@ -987,6 +1021,10 @@ static int pt1_init_frontends(struct pt1 *pt1)
 			goto tuner_release;
 	}
 
+	ret = pt1_demod_block_init(pt1);
+	if (ret < 0)
+		goto fe_unregister;
+
 	return 0;
 
 tuner_release:

@@ -1245,6 +1283,10 @@ static int pt1_resume(struct device *dev)
 	pt1_update_power(pt1);
 	usleep_range(1000, 2000);
 
+	ret = pt1_demod_block_init(pt1);
+	if (ret < 0)
+		goto resume_err;
+
 	for (i = 0; i < PT1_NR_ADAPS; i++)
 		dvb_frontend_reinitialise(pt1->adaps[i]->fe);
 

Signature · 1 line

2.20.1