s390x: Add BSS clearing for non ELF boot
PATCH v5 5/11 s390x: Add BSS clearing for non ELF boot
When doing an IPL normal the memory will not be zeroed and hence the BSS section can have any value. We need to clear it by ourselves.
Signed-off-by Janosch Frank <[email protected]>
Reviewed-by Thomas Huth <[email protected]>
Reviewed-by David Hildenbrand <[email protected]>
--- s390x/cstart64.S | 22 ++++++++++++++++++++-- s390x/flat.lds | 2 ++ 2 files changed, 22 insertions(+), 2 deletions(-)
s390x/cstart64.S +20 -2
@@ -39,7 +39,22 @@ start: /* setup initial PSW mask + control registers*/ larl %r1, initial_psw lpswe 0(%r1) -init_psw_cont: +clear_bss_start: + larl %r2, __bss_start + larl %r3, __bss_end + slgr %r3, %r2 # Get sizeof bss + aghi %r3,-1 + srlg %r4,%r3,8 # Calc number of 256 byte chunks + ltgr %r4,%r4 + lgr %r1,%r2 + jz clear_bss_remainder # If none, clear remaining bytes +clear_bss_loop: + xc 0(256,%r1), 0(%r1) # Clear 256 byte chunks via xor + la %r1, 256(%r1) + brctg %r4, clear_bss_loop +clear_bss_remainder: + larl %r2, memsetxc + ex %r3, 0(%r2) /* setup pgm interrupt handler */ larl %r1, pgm_int_psw mvc GEN_LC_PGM_NEW_PSW(16), 0(%r1)
@@ -71,6 +86,9 @@ init_psw_cont: /* call exit() */ j exit +memsetxc: + xc 0(1,%r1),0(%r1) + .macro SAVE_REGS /* save grs 0-15 */ stmg %r0, %r15, GEN_LC_SW_INT_GRS
@@ -159,7 +177,7 @@ svc_int: .align 8 initial_psw: - .quad 0x0000000180000000, init_psw_cont + .quad 0x0000000180000000, clear_bss_start pgm_int_psw: .quad 0x0000000180000000, pgm_int ext_int_psw:
s390x/flat.lds +2 -0
@@ -40,7 +40,9 @@ SECTIONS . = ALIGN(16); .rodata : { *(.rodata) *(.rodata.*) } . = ALIGN(16); + __bss_start = .; .bss : { *(.bss) } + __bss_end = .; . = ALIGN(64K); edata = .; . += 64K;
Signature · 1 line
2.14.3