Skip to contentSkip to conversation

nvme small fix

PATCH In review Li Qiang 2 participants 7 messages Jan 11, 2019 – Jan 14, 2019

lore
Share & tools
lore

Li Qiang

author
#0 lore raw

v2 cover nvme small fix

This patchset contains small fix.

Change since v1:

1. drop the patch of checking return value of msix_init_exclusive_bar
2. return when nvme's num_queues configuration is 0

Li Qiang (3):
nvme: use TYPE_NVME instead of constant string
nvme: ensure the num_queues is not zero
nvme: use pci_dev directly in nvme_realize

 hw/block/nvme.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH v2 1/3 nvme: use TYPE_NVME instead of constant string

---
 hw/block/nvme.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
hw/block/nvme.c +1 -1
index 7c8c63e8f5..f206391e8e 100644
@@ -1381,7 +1381,7 @@ static void nvme_instance_init(Object *obj)
 }
 
 static const TypeInfo nvme_info = {
-    .name          = "nvme",
+    .name          = TYPE_NVME,
     .parent        = TYPE_PCI_DEVICE,
     .instance_size = sizeof(NvmeCtrl),
     .class_init    = nvme_class_init,
Signature · 1 line
2.17.1
author
#3 lore raw

PATCH v2 2/3 nvme: ensure the num_queues is not zero

In reply to Li Qiang

When it is zero, it causes segv. Backtrack:
Thread 5 "qemu-system-x86" received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffc6c17700 (LWP 51808)] 0x0000555555acbd90 in nvme_start_ctrl (n=0x6240000c8100) at hw/block/nvme.c:820
warning: Source file is more recent than executable.
820 if (unlikely(n->cq[0])) {
(gdb) bt

0  0x0000555555acbd90 in nvme_start_ctrl (n=0x6240000c8100) at hw/block/nvme.c:820
1  0x0000555555accdbc in nvme_write_bar (n=0x6240000c8100, offset=20, data=4587521, size=4) at hw/block/nvme.c:964
2  0x0000555555acdd2b in nvme_mmio_write (opaque=0x6240000c8100, addr=20, data=4587521, size=4) at hw/block/nvme.c:1158
3  0x00005555558973ed in memory_region_write_accessor (mr=0x6240000c89e0, addr=20, value=0x7fffc6c14428, size=4, shift=0, mask=4294967295, attrs=...) at /home/liqiang02/qemu-upstream/qemu/memory.c:500
4  0x0000555555897600 in access_with_adjusted_size (addr=20, value=0x7fffc6c14428, size=4, access_size_min=2, access_size_max=8, access_fn=0x555555897304 <memory_region_write_accessor>, mr=0x6240000c89e0, attrs=...) at /home/liqiang02/qemu-upstream/qemu/memory.c:566
5  0x000055555589a200 in memory_region_dispatch_write (mr=0x6240000c89e0, addr=20, data=4587521, size=4, attrs=...) at /home/liqiang02/qemu-upstream/qemu/memory.c:1442
6  0x0000555555835151 in flatview_write_continue (fv=0x6060000e6fc0, addr=4273930260, attrs=..., buf=0x7fffc8a18028 "\001", len=4, addr1=20, l=4, mr=0x6240000c89e0) at /home/liqiang02/qemu-upstream/qemu/exec.c:3233
7  0x000055555583529b in flatview_write (fv=0x6060000e6fc0, addr=4273930260, attrs=..., buf=0x7fffc8a18028 "\001", len=4) at /home/liqiang02/qemu-upstream/qemu/exec.c:3272
8  0x00005555558355a1 in address_space_write (as=0x55555683ade0 <address_space_memory>, addr=4273930260, attrs=..., buf=0x7fffc8a18028 "\001", len=4) at /home/liqiang02/qemu-upstream/qemu/exec.c:3362
9  0x00005555558355f2 in address_space_rw (as=0x55555683ade0 <address_space_memory>, addr=4273930260, attrs=..., buf=0x7fffc8a18028 "\001", len=4, is_write=true) at /home/liqiang02/qemu-upstream/qemu/exec.c:3373

10 0x00005555558b66ac in kvm_cpu_exec (cpu=0x631000014800) at /home/liqiang02/qemu-upstream/qemu/accel/kvm/kvm-all.c:2031 11 0x000055555587c3ac in qemu_kvm_cpu_thread_fn (arg=0x631000014800) at /home/liqiang02/qemu-upstream/qemu/cpus.c:1277 12 0x0000555555e54ae6 in qemu_thread_start (args=0x60300002c170) at util/qemu-thread-posix.c:504
13 0x00007fffdadbd494 in start_thread () from /lib/x86_64-linux-gnu/libpthread.so.0
14 0x00007fffdaaffacf in clone () from /lib/x86_64-linux-gnu/libc.so.6
(gdb) q

---
 hw/block/nvme.c | 5 +++++
 1 file changed, 5 insertions(+)
hw/block/nvme.c +5 -0
index f206391e8e..0ded74fa9a 100644
@@ -1223,6 +1223,11 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
         error_setg(errp, "serial property not set");
         return;
     }
+
+    if (!n->num_queues) {
+        error_setg(errp, "num_queues can't be zero");
+        return;
+    }
     blkconf_blocksizes(&n->conf);
     if (!blkconf_apply_backend_options(&n->conf, blk_is_read_only(n->conf.blk),
                                        false, errp)) {
Signature · 1 line
2.17.1
author
#5 lore raw

PATCH v2 3/3 nvme: use pci_dev directly in nvme_realize

In reply to Li Qiang

There is no need to make another reference.

---
 hw/block/nvme.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
hw/block/nvme.c +4 -4
index 0ded74fa9a..0a1da749fc 100644
@@ -1238,7 +1238,7 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
     pci_conf[PCI_INTERRUPT_PIN] = 1;
     pci_config_set_prog_interface(pci_dev->config, 0x2);
     pci_config_set_class(pci_dev->config, PCI_CLASS_STORAGE_EXPRESS);
-    pcie_endpoint_cap_init(&n->parent_obj, 0x80);
+    pcie_endpoint_cap_init(pci_dev, 0x80);
 
     n->num_namespaces = 1;
     n->reg_size = pow2ceil(0x1004 + 2 * (n->num_queues + 1) * 4);
@@ -1250,10 +1250,10 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
 
     memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n,
                           "nvme", n->reg_size);
-    pci_register_bar(&n->parent_obj, 0,
+    pci_register_bar(pci_dev, 0,
         PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64,
         &n->iomem);
-    msix_init_exclusive_bar(&n->parent_obj, n->num_queues, 4, NULL);
+    msix_init_exclusive_bar(pci_dev, n->num_queues, 4, NULL);
 
     id->vid = cpu_to_le16(pci_get_word(pci_conf + PCI_VENDOR_ID));
     id->ssvid = cpu_to_le16(pci_get_word(pci_conf + PCI_SUBSYSTEM_VENDOR_ID));
@@ -1308,7 +1308,7 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
         n->cmbuf = g_malloc0(NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
         memory_region_init_io(&n->ctrl_mem, OBJECT(n), &nvme_cmb_ops, n,
                               "nvme-cmb", NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
-        pci_register_bar(&n->parent_obj, NVME_CMBLOC_BIR(n->bar.cmbloc),
+        pci_register_bar(pci_dev, NVME_CMBLOC_BIR(n->bar.cmbloc),
             PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64 |
             PCI_BASE_ADDRESS_MEM_PREFETCH, &n->ctrl_mem);
 
Signature · 1 line
2.17.1
Reviewed-by on v2 1/3
#2 lore raw

Re: [Qemu-devel] [PATCH v2 1/3] nvme: use TYPE_NVME instead of constant string

In reply to Li Qiang
Quoted 2 lines · Li Qiang
Quoted 18 lines
---
 hw/block/nvme.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
hw/block/nvme.c +1 -1
index 7c8c63e8f5..f206391e8e 100644
@@ -1381,7 +1381,7 @@ static void nvme_instance_init(Object *obj)
 }
 
 static const TypeInfo nvme_info = {
-    .name          = "nvme",
+    .name          = TYPE_NVME,
     .parent        = TYPE_PCI_DEVICE,
     .instance_size = sizeof(NvmeCtrl),
     .class_init    = nvme_class_init,
Reviewed-by on v2 2/3
#4 lore raw

Re: [Qemu-devel] [PATCH v2 2/3] nvme: ensure the num_queues is not zero

In reply to Li Qiang

Hi Li,

Quoted 2 lines · Li Qiang

When it is zero, it causes segv. Backtrack:
Thread 5 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.

Can you add the relevant part of the command line you used here?

Quoted 3 lines

[Switching to Thread 0x7fffc6c17700 (LWP 51808)] 0x0000555555acbd90 in nvme_start_ctrl (n=0x6240000c8100) at hw/block/nvme.c:820
warning: Source file is more recent than executable.

^ drop this line

Quoted 29 lines

820 if (unlikely(n->cq[0])) {
(gdb) bt

0  0x0000555555acbd90 in nvme_start_ctrl (n=0x6240000c8100) at hw/block/nvme.c:820
1  0x0000555555accdbc in nvme_write_bar (n=0x6240000c8100, offset=20, data=4587521, size=4) at hw/block/nvme.c:964
2  0x0000555555acdd2b in nvme_mmio_write (opaque=0x6240000c8100, addr=20, data=4587521, size=4) at hw/block/nvme.c:1158
3  0x00005555558973ed in memory_region_write_accessor (mr=0x6240000c89e0, addr=20, value=0x7fffc6c14428, size=4, shift=0, mask=4294967295, attrs=...) at /home/liqiang02/qemu-upstream/qemu/memory.c:500
4  0x0000555555897600 in access_with_adjusted_size (addr=20, value=0x7fffc6c14428, size=4, access_size_min=2, access_size_max=8, access_fn=0x555555897304 <memory_region_write_accessor>, mr=0x6240000c89e0, attrs=...) at /home/liqiang02/qemu-upstream/qemu/memory.c:566
5  0x000055555589a200 in memory_region_dispatch_write (mr=0x6240000c89e0, addr=20, data=4587521, size=4, attrs=...) at /home/liqiang02/qemu-upstream/qemu/memory.c:1442
6  0x0000555555835151 in flatview_write_continue (fv=0x6060000e6fc0, addr=4273930260, attrs=..., buf=0x7fffc8a18028 "\001", len=4, addr1=20, l=4, mr=0x6240000c89e0) at /home/liqiang02/qemu-upstream/qemu/exec.c:3233
7  0x000055555583529b in flatview_write (fv=0x6060000e6fc0, addr=4273930260, attrs=..., buf=0x7fffc8a18028 "\001", len=4) at /home/liqiang02/qemu-upstream/qemu/exec.c:3272
8  0x00005555558355a1 in address_space_write (as=0x55555683ade0 <address_space_memory>, addr=4273930260, attrs=..., buf=0x7fffc8a18028 "\001", len=4) at /home/liqiang02/qemu-upstream/qemu/exec.c:3362
9  0x00005555558355f2 in address_space_rw (as=0x55555683ade0 <address_space_memory>, addr=4273930260, attrs=..., buf=0x7fffc8a18028 "\001", len=4, is_write=true) at /home/liqiang02/qemu-upstream/qemu/exec.c:3373

10 0x00005555558b66ac in kvm_cpu_exec (cpu=0x631000014800) at /home/liqiang02/qemu-upstream/qemu/accel/kvm/kvm-all.c:2031 11 0x000055555587c3ac in qemu_kvm_cpu_thread_fn (arg=0x631000014800) at /home/liqiang02/qemu-upstream/qemu/cpus.c:1277 12 0x0000555555e54ae6 in qemu_thread_start (args=0x60300002c170) at util/qemu-thread-posix.c:504
13 0x00007fffdadbd494 in start_thread () from /lib/x86_64-linux-gnu/libpthread.so.0
14 0x00007fffdaaffacf in clone () from /lib/x86_64-linux-gnu/libc.so.6
(gdb) q

---
 hw/block/nvme.c | 5 +++++
 1 file changed, 5 insertions(+)
hw/block/nvme.c +0 -0
index f206391e8e..0ded74fa9a 100644

hw/block/nvme.c static void nvme_realize(PCIDevice *pci_dev, Error **errp) · line 1230

Quoted 8 lines
hw/block/nvme.c +5 -0
@@ -1223,6 +1223,11 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
         error_setg(errp, "serial property not set");
         return;
     }
+
+    if (!n->num_queues) {
+        error_setg(errp, "num_queues can't be zero");
+        return;
+    }

I'd add this as the first check, to avoid the blk_getlength() call.

hw/block/nvme.c static void nvme_realize(PCIDevice *pci_dev, Error **errp) · line 1233

Quoted 4 lines
hw/block/nvme.c +0 -0
     blkconf_blocksizes(&n->conf);
     if (!blkconf_apply_backend_options(&n->conf, blk_is_read_only(n->conf.blk),
                                        false, errp)) {

With command line comment:

Reviewed-by on v2 3/3
#6 lore raw

Re: [Qemu-devel] [PATCH v2 3/3] nvme: use pci_dev directly in nvme_realize

In reply to Li Qiang
Quoted 4 lines · Li Qiang

There is no need to make another reference.

Quoted 40 lines
---
 hw/block/nvme.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
hw/block/nvme.c +4 -4
index 0ded74fa9a..0a1da749fc 100644
@@ -1238,7 +1238,7 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
     pci_conf[PCI_INTERRUPT_PIN] = 1;
     pci_config_set_prog_interface(pci_dev->config, 0x2);
     pci_config_set_class(pci_dev->config, PCI_CLASS_STORAGE_EXPRESS);
-    pcie_endpoint_cap_init(&n->parent_obj, 0x80);
+    pcie_endpoint_cap_init(pci_dev, 0x80);
 
     n->num_namespaces = 1;
     n->reg_size = pow2ceil(0x1004 + 2 * (n->num_queues + 1) * 4);
@@ -1250,10 +1250,10 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
 
     memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n,
                           "nvme", n->reg_size);
-    pci_register_bar(&n->parent_obj, 0,
+    pci_register_bar(pci_dev, 0,
         PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64,
         &n->iomem);
-    msix_init_exclusive_bar(&n->parent_obj, n->num_queues, 4, NULL);
+    msix_init_exclusive_bar(pci_dev, n->num_queues, 4, NULL);
 
     id->vid = cpu_to_le16(pci_get_word(pci_conf + PCI_VENDOR_ID));
     id->ssvid = cpu_to_le16(pci_get_word(pci_conf + PCI_SUBSYSTEM_VENDOR_ID));
@@ -1308,7 +1308,7 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
         n->cmbuf = g_malloc0(NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
         memory_region_init_io(&n->ctrl_mem, OBJECT(n), &nvme_cmb_ops, n,
                               "nvme-cmb", NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
-        pci_register_bar(&n->parent_obj, NVME_CMBLOC_BIR(n->bar.cmbloc),
+        pci_register_bar(pci_dev, NVME_CMBLOC_BIR(n->bar.cmbloc),
             PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64 |
             PCI_BASE_ADDRESS_MEM_PREFETCH, &n->ctrl_mem);