Is there a good "getting started" tutorial?
I'm new to Yocto and looking for a good "getting started" tutorial. I've tried
https://www.yoctoproject.org/docs/2.6/brief-yoctoprojectqs/brief-yoctoprojectqs.html
and immediately ran into mistakes on the very first step:
Use Git to Clone Poky¶
Once you complete the setup instructions for your machine, you need to get a copy of the Poky repository on your build host. Use the following commands to clone the Poky repository and then checkout the yocto-2.6 release:
$ git clone git://git.yoctoproject.org/poky
Cloning into 'poky'...
remote: Counting objects: 361782, done.
remote: Compressing objects: 100% (87100/87100), done.
remote: Total 361782 (delta 268619), reused 361439 (delta 268277)
Receiving objects: 100% (361782/361782), 131.94 MiB | 6.88 MiB/s, done.
Resolving deltas: 100% (268619/268619), done.
Checking connectivity... done.
$ git checkout tags/yocto-2.5 -b my-yocto-2.5
The previous Git checkout command creates a local branch named
my-yocto-2.6. [...]It does? The 'git clone' command seems to be OK, but the second command fails:
$ git clone git://git.yoctoproject.org/poky
Cloning into 'poky'...
remote: Counting objects: 428632, done.
remote: Compressing objects: 100% (101203/101203), done.
remote: Total 428632 (delta 320463), reused 428532 (delta 320363)
Receiving objects: 100% (428632/428632), 153.01 MiB | 1.33 MiB/s, done.
Resolving deltas: 100% (320463/320463), done.
$ git checkout tags/yocto-2.5 -b my-yocto-2.5
fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).I re-tried the second command, changing the version from 2.5 to 2.6, and that didn't work either:
$ git checkout tags/yocto-2.6 -b my-yocto-2.6
fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).It looks like there's a missing 'cd poky' command that needs to be inserted before the 'git checkout', and the checkout command needs to be changed from 2.5 to 2.6.
Has anybody tried this tutorial recently to see if it actually works?
Is there a better getting started doc?
--
Grant
Grant - I will check this out. I am going to use this manual -
https://www.yoctoproject.org/docs/2.6.1/brief-yoctoprojectqs/brief-yoctoprojectqs.html
.
Scott
Quoted 68 lines · Grant Edwards
I'm new to Yocto and looking for a good "getting started" tutorial. I've tried
https://www.yoctoproject.org/docs/2.6/brief-yoctoprojectqs/brief-yoctoprojectqs.html
and immediately ran into mistakes on the very first step:
Use Git to Clone Poky¶
Once you complete the setup instructions for your machine, you need to
get a copy of the Poky repository on your build host. Use the following commands to clone the Poky repository and then checkout the yocto-2.6 release:$ git clone git://git.yoctoproject.org/poky Cloning into 'poky'... remote: Counting objects: 361782, done. remote: Compressing objects: 100% (87100/87100), done. remote: Total 361782 (delta 268619), reused 361439 (delta 268277) Receiving objects: 100% (361782/361782), 131.94 MiB | 6.88 MiB/s, done. Resolving deltas: 100% (268619/268619), done. Checking connectivity... done. $ git checkout tags/yocto-2.5 -b my-yocto-2.5The previous Git checkout command creates a local branch named my-yocto-2.6. [...]
It does? The 'git clone' command seems to be OK, but the second command fails:
$ git clone git://git.yoctoproject.org/poky Cloning into 'poky'... remote: Counting objects: 428632, done. remote: Compressing objects: 100% (101203/101203), done. remote: Total 428632 (delta 320463), reused 428532 (delta 320363) Receiving objects: 100% (428632/428632), 153.01 MiB | 1.33 MiB/s, done. Resolving deltas: 100% (320463/320463), done. $ git checkout tags/yocto-2.5 -b my-yocto-2.5 fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).I re-tried the second command, changing the version from 2.5 to 2.6, and that didn't work either:
$ git checkout tags/yocto-2.6 -b my-yocto-2.6 fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).It looks like there's a missing 'cd poky' command that needs to be inserted before the 'git checkout', and the checkout command needs to be changed from 2.5 to 2.6.
Has anybody tried this tutorial recently to see if it actually works?
Is there a better getting started doc?
--
Grant
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Hi Grant,
There are indeed some errors in that tutorial. Thanks for finding them and sending notification. Try the instructions in the latest quick start for the 2.6 "thud" release.
https://yoctoproject.org/docs/2.6/brief-yoctoprojectqs/brief-yoctoprojectqs.html
I have run through them and made some adjustments to the manual to clear things up. It is working for me.
Thanks,
Scott
Quoted 68 lines · Grant Edwards
I'm new to Yocto and looking for a good "getting started" tutorial. I've tried
https://www.yoctoproject.org/docs/2.6/brief-yoctoprojectqs/brief-yoctoprojectqs.html
and immediately ran into mistakes on the very first step:
Use Git to Clone Poky¶
Once you complete the setup instructions for your machine, you need to
get a copy of the Poky repository on your build host. Use the following commands to clone the Poky repository and then checkout the yocto-2.6 release:$ git clone git://git.yoctoproject.org/poky Cloning into 'poky'... remote: Counting objects: 361782, done. remote: Compressing objects: 100% (87100/87100), done. remote: Total 361782 (delta 268619), reused 361439 (delta 268277) Receiving objects: 100% (361782/361782), 131.94 MiB | 6.88 MiB/s, done. Resolving deltas: 100% (268619/268619), done. Checking connectivity... done. $ git checkout tags/yocto-2.5 -b my-yocto-2.5The previous Git checkout command creates a local branch named my-yocto-2.6. [...]
It does? The 'git clone' command seems to be OK, but the second command fails:
$ git clone git://git.yoctoproject.org/poky Cloning into 'poky'... remote: Counting objects: 428632, done. remote: Compressing objects: 100% (101203/101203), done. remote: Total 428632 (delta 320463), reused 428532 (delta 320363) Receiving objects: 100% (428632/428632), 153.01 MiB | 1.33 MiB/s, done. Resolving deltas: 100% (320463/320463), done. $ git checkout tags/yocto-2.5 -b my-yocto-2.5 fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).I re-tried the second command, changing the version from 2.5 to 2.6, and that didn't work either:
$ git checkout tags/yocto-2.6 -b my-yocto-2.6 fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).It looks like there's a missing 'cd poky' command that needs to be inserted before the 'git checkout', and the checkout command needs to be changed from 2.5 to 2.6.
Has anybody tried this tutorial recently to see if it actually works?
Is there a better getting started doc?
--
Grant
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto