Skip to contentSkip to conversation

target/xtensa: add MX interrupt controller

PATCH New Max Filippov 1 participant 1 message Jan 28, 2019

lore
Share & tools
lore
#0 lore raw

PATCH v2 2/4 target/xtensa: add MX interrupt controller

MX interrupt controller is a collection of the following devices accessible through the external registers interface:
- interrupt distributor can route each external IRQ line to the corresponding external IRQ pin of selected subset of connected xtensa cores. It has per-CPU and per-IRQ enable signals and per-IRQ software assert signals;
- IPI controller has 16 per-CPU IPI signals that may be routed to a combination of 3 designated external IRQ pins of connected xtensa cores;
- cache coherecy register controls core L1 cache participation in the SMP cluster cache coherency protocol;
- runstall register lets BSP core stall and unstall AP cores.

---
Changes v1->v2:
- fix typo in xtensa_mx_pic_ext_reg_write

 hw/xtensa/Makefile.objs    |   1 +
 hw/xtensa/mx_pic.c         | 354 +++++++++++++++++++++++++++++++++++++++++++++
 include/hw/xtensa/mx_pic.h |  44 ++++++
 3 files changed, 399 insertions(+)
 create mode 100644 hw/xtensa/mx_pic.c
 create mode 100644 include/hw/xtensa/mx_pic.h
hw/xtensa/Makefile.objs +1 -0
index cb4998d2bf34..f30e4a7e076b 100644
@@ -1,3 +1,4 @@
+obj-y += mx_pic.o
 obj-y += pic_cpu.o
 obj-y += sim.o
 obj-y += xtensa_memory.o
hw/xtensa/mx_pic.c new file +354 -0

354 lines not on this page · raw message

include/hw/xtensa/mx_pic.h new file +44 -0

44 lines not on this page · raw message

Signature · 1 line
2.11.0