Skip to contentSkip to conversation

arm64: dts: qcom: Enable blsp1_uart3 for qcs404-evb

PATCH New Vinod Koul 1 participant 1 message Feb 1, 2019

Subsystems (3)
Device tree bindings Arm Qualcomm mailing list Arm Qualcomm support
lore
Share & tools
lore

Vinod Koul

author
#0 lore raw

PATCH 1/1 arm64: dts: qcom: Enable blsp1_uart3 for qcs404-evb

From: Shawn Guo <[email protected]>

It defines pinctrl settings for blsp1_uart3 in board level dts and enable the device by toggling 'status'.

Signed-off-by Shawn Guo <[email protected]>
Signed-off-by Abhinav Asati <[email protected]>
Signed-off-by Vinod Koul <[email protected]>
---
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +10 -0
index 50b3589c7f15..d85452f528c5 100644
@@ -7,6 +7,7 @@
 / {
 	aliases {
 		serial0 = &blsp1_uart2;
+		serial1 = &blsp1_uart3;
 	};
 
 	chosen {

@@ -137,6 +138,11 @@
 };
 
 &tlmm {
+	blsp1_uart3_default: blsp1-uart3-default {
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	sdc1_on: sdc1-on {
 		clk {
 			pins = "sdc1_clk";

@@ -205,3 +211,7 @@
 		bias-disable;
 	};
 };
+
+&blsp1_uart3 {
+	status = "okay";
+};
Signature · 1 line
2.20.1