Input: cap11xx - switch to using set_brightness_blocking()
Subsystems (2)
Dmitry Torokhov
maintainerPATCH 1/1 Input: cap11xx - switch to using set_brightness_blocking()
Updating LED state requires access to regmap and therefore we may sleep, so we could not do that directly form set_brightness() method. Historically we used private work to adjust the brightness, but with the introduction of set_brightness_blocking() we no longer need it.
As a bonus, not having our own work item means we do not have use-after-free issue as we neglected to cancel outstanding work on driver unbind.
--- drivers/input/keyboard/cap11xx.c | 47 ++++++++++++++------------------ 1 file changed, 21 insertions(+), 26 deletions(-)
drivers/input/keyboard/cap11xx.c +21 -26
@@ -75,9 +75,8 @@struct cap11xx_led {struct cap11xx_priv *priv;struct led_classdev cdev; -struct work_struct work;u32 reg; -enum led_brightness new_brightness; +enum led_brightness brightness; };#endif
@@ -233,30 +232,28 @@ static void cap11xx_input_close(struct input_dev *idev) }#ifdef CONFIG_LEDS_CLASS -static void cap11xx_led_work (struct work_struct *work) -{ - struct cap11xx_led *led = container_of(work, struct cap11xx_led, work); -struct cap11xx_priv *priv = led->priv; -int value = led->new_brightness; - -/* -* All LEDs share the same duty cycle as this is a HW limitation. -* Brightness levels per LED are either 0 (OFF) and 1 (ON). -*/ -regmap_update_bits (priv->regmap,CAP11XX_REG_LED_OUTPUT_CONTROL , -BIT (led->reg), value ?BIT (led->reg) :0 ); -} - -static void cap11xx_led_set (struct led_classdev *cdev, -enum led_brightness value) +static int cap11xx_led_set (struct led_classdev *cdev, +enum led_brightness value) { struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev); +struct cap11xx_priv *priv = led->priv; +int error =0 ; + +if (led->brightness != value) { +/* +* All LEDs share the same duty cycle as this is a HW +* limitation. Brightness levels per LED are either +* 0 (OFF) and 1 (ON). +*/ + error =regmap_update_bits (priv->regmap, +CAP11XX_REG_LED_OUTPUT_CONTROL , +BIT (led->reg), + value ?BIT (led->reg) :0 ); +if (!error) + led->brightness = value; + } -if (led->new_brightness == value) -return ; - - led->new_brightness = value; -schedule_work (&led->work); +return error; } static int cap11xx_init_leds(struct device *dev,
@@ -299,7 +296,7 @@ static int cap11xx_init_leds(struct device *dev, led->cdev.default_trigger =of_get_property (child,"linux,default-trigger" ,NULL ); led->cdev.flags =0 ; - led->cdev.brightness_set = cap11xx_led_set; + led->cdev.brightness_set_blocking = cap11xx_led_set; led->cdev.max_brightness =1 ; led->cdev.brightness =LED_OFF ;
@@ -312,8 +309,6 @@ static int cap11xx_init_leds(struct device *dev, led->reg = reg; led->priv = priv; -INIT_WORK (&led->work, cap11xx_led_work); - error =devm_led_classdev_register (dev, &led->cdev);if (error) {of_node_put (child);
Signature · 5 lines
2.20.1.611.gfbb209baf1-goog -- Dmitry
Quoted 6 lines · Dmitry Torokhov
Updating LED state requires access to regmap and therefore we may sleep, so we could not do that directly form
set_brightness()method. Historically we used private work to adjust the brightness, but with the introduction ofset_brightness_blocking()we no longer need it.
Elegant solution, nice !
I read the patch to verify that the user-after-free is now gone, but obviously I cannot test,
as I have no cap11xx hardware. For what it's worth:
Hi Dmitry,
Quoted 48 lines · Dmitry Torokhov
Updating LED state requires access to regmap and therefore we may sleep, so we could not do that directly form
set_brightness()method. Historically we used private work to adjust the brightness, but with the introduction ofset_brightness_blocking()we no longer need it.As a bonus, not having our own work item means we do not have use-after-free issue as we neglected to cancel outstanding work on driver unbind.
Reported-by Sven Van Asbroeck <[email protected]>Signed-off-by Dmitry Torokhov <[email protected]>--- drivers/input/keyboard/cap11xx.c | 47 ++++++++++++++------------------ 1 file changed, 21 insertions(+), 26 deletions(-)drivers/input/keyboard/cap11xx.c +1
-16@@ -75,9 +75,8 @@struct cap11xx_led {struct cap11xx_priv *priv;struct led_classdev cdev; -struct work_struct work;u32 reg; -enum led_brightness new_brightness; +enum led_brightness brightness; };#endif @@ -233,30 +232,28 @@ static void cap11xx_input_close(struct input_dev *idev) }#ifdef CONFIG_LEDS_CLASS -static void cap11xx_led_work (struct work_struct *work) -{ - struct cap11xx_led *led = container_of(work, struct cap11xx_led, work); -struct cap11xx_priv *priv = led->priv; -int value = led->new_brightness; - -/* -* All LEDs share the same duty cycle as this is a HW limitation. -* Brightness levels per LED are either 0 (OFF) and 1 (ON). -*/ -regmap_update_bits (priv->regmap,CAP11XX_REG_LED_OUTPUT_CONTROL , -BIT (led->reg), value ?BIT (led->reg) :0 ); -} -
drivers/input/keyboard/cap11xx.c static void cap11xx_input_close(struct input_dev *idev) · line 242
Quoted 10 lines
drivers/input/keyboard/cap11xx.c +6
-2-static void cap11xx_led_set (struct led_classdev *cdev, -enum led_brightness value) +static int cap11xx_led_set (struct led_classdev *cdev, +enum led_brightness value) { struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev); +struct cap11xx_priv *priv = led->priv; +int error =0 ; + +if (led->brightness != value) {
I'd say this check is not needed. If registers are not marked volatile then regmap should not do the actual write to the hardware if the value is equal to the cached one.
Quoted 41 lines
drivers/input/keyboard/cap11xx.c +14
-8+/* +* All LEDs share the same duty cycle as this is a HW +* limitation. Brightness levels per LED are either +* 0 (OFF) and 1 (ON). +*/ + error =regmap_update_bits (priv->regmap, +CAP11XX_REG_LED_OUTPUT_CONTROL , +BIT (led->reg), + value ?BIT (led->reg) :0 ); +if (!error) + led->brightness = value; + } -if (led->new_brightness == value) -return ; - - led->new_brightness = value; -schedule_work (&led->work); +return error; } static int cap11xx_init_leds(struct device *dev,@@ -299,7 +296,7 @@ static int cap11xx_init_leds(struct device *dev, led->cdev.default_trigger =of_get_property (child,"linux,default-trigger" ,NULL ); led->cdev.flags =0 ; - led->cdev.brightness_set = cap11xx_led_set; + led->cdev.brightness_set_blocking = cap11xx_led_set; led->cdev.max_brightness =1 ; led->cdev.brightness =LED_OFF ;@@ -312,8 +309,6 @@ static int cap11xx_init_leds(struct device *dev, led->reg = reg; led->priv = priv; -INIT_WORK (&led->work, cap11xx_led_work); - error =devm_led_classdev_register (dev, &led->cdev);if (error) {of_node_put (child);
Signature · 2 lines
Best regards, Jacek Anaszewski