Skip to contentSkip to conversation

arm64: dts: marvell: Remove unnecessary #address-cells/#size-cells under flashes

PATCH New Gregory CLEMENT 1 participant 1 message Feb 5, 2019

Subsystems (2)
lore
Share & tools
lore

Gregory CLEMENT

author maintainer
#0 lore raw

PATCH 1/1 arm64: dts: marvell: Remove unnecessary #address-cells/#size-cells under flashes

By using the new binding for the partitions for the flashes we don't need anymore to use #size-cells and #address-cells at the flash node level.

---
 arch/arm64/boot/dts/marvell/armada-7040-db.dts | 4 ----
 arch/arm64/boot/dts/marvell/armada-8040-db.dts | 4 ----
 2 files changed, 8 deletions(-)
arch/arm64/boot/dts/marvell/armada-7040-db.dts +0 -4
index 412efdb46e7c..d20d84ce7ca8 100644
@@ -66,8 +66,6 @@
 	status = "okay";
 
 	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
@@ -169,8 +167,6 @@
 	status = "okay";
 
 	spi-flash@0 {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-max-frequency = <20000000>;
arch/arm64/boot/dts/marvell/armada-8040-db.dts +0 -4
index 1bac437369a1..9f4f939ab65f 100644
@@ -81,8 +81,6 @@
 	status = "okay";
 
 	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
@@ -214,8 +212,6 @@
 	status = "okay";
 
 	spi-flash@0 {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-max-frequency = <20000000>;
Signature · 7 lines
2.20.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel