USB: serial: pl2303: add Delock Infrared device id
Quoted 16 lines · Ebrahim Byagowi
Quoted 14 lines · Johan Hovold
Quoted 9 lines · Ebrahim Byagowi
Quoted 8 lines · Johan Hovold
Quoted 7 lines · On Sat, Feb 09, 2019 at 12:18:40PM +0330, [email protected] wrote:
From: Ebrahim Byagowi <[email protected]>
This makes Delock Infrared adapter to work as a USB to Serial device.
--- drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 3 +++ 2 files changed, 4 insertions(+)These descriptors do no look like they come from a pl2303 device (e.g. the device descriptor class and protocol is 255/1/0 and not 0/0/0).
Quoted 7 lines
Quoted 6 lines
Quoted 3 lines
I've uploaded a screenshot here
https://commons.wikimedia.org/wiki/File:A_modified_kernel_screenshot_on_QEMU.png
which shows it understands a remote control commands also.It shows that you receive something over the bulk-in endpoint at the default line speed, but those
-EPIPEerrors also tells us that this is not a pl2303 device.Oh, understandable. And very sorry that I was misleading here.
No, problem.
Quoted 9 lines
Quoted 2 lines
Would you be able to open the device to see if you can identify a generic usb-serial chip inside?
Here is a picture of its inside[1] and that 3606 apparently is the usb to serial chip.
We suspected it is related to[2] but its pins doesn't match and I couldn't yet test the module provided there is related for some reason so any pointer will be nice.
No, sorry. It's seems unlikely to be a mcs7780 given the pins.
Perhaps looking closer at the windows driver and snooping traffic might provide some insights into the protocol used.
A search also revealed one libusb project for this device on sourcefourge, but judging from a very quick look it also just did reads and writes over the bulk-endpoints without any control commands. But perhaps someone has done some research in this area before you.
Johan
