Skip to contentSkip to conversation

parisc: Add constants for various PDC firmware calls

PATCH New Helge Deller 1 participant 1 message Feb 11, 2019 PA-RISC architecture

lore
Share & tools
lore

Helge Deller

author maintainer
#0 lore raw

PATCH 1/1 parisc: Add constants for various PDC firmware calls

PDC_DEBUG, PDC_ALLOC and PDC_SCSI_PARMS were missing. PDC_CONFIG is call #17, not 16. Luckily it's nowhere referenced yet.

arch/parisc/include/uapi/asm/pdc.h +12 -2
index cdab708516b4..ecab6d4e198f 100644
@@ -114,11 +114,13 @@
 #define PDC_ADD_VALID	12		/* Memory validation PDC call	*/
 #define PDC_ADD_VALID_VERIFY	0	/* Make PDC_ADD_VALID verify region */
 
+#define PDC_DEBUG	14		/* Obsolete			*/
+
 #define PDC_INSTR	15		/* get instr to invoke PDCE_CHECK() */
 
 #define PDC_PROC	16		/* (sprockets)			*/
 
-#define PDC_CONFIG	16		/* (sprockets)			*/
+#define PDC_CONFIG	17		/* (sprockets)			*/
 #define PDC_CONFIG_DECONFIG	0
 #define PDC_CONFIG_DRECONFIG	1
 #define PDC_CONFIG_DRETURN_CONFIG 2
@@ -168,7 +170,15 @@
 #define PDC_SOFT_POWER_INFO	0	/* return info about the soft power switch */
 #define PDC_SOFT_POWER_ENABLE	1	/* enable/disable soft power switch */
 
-#define PDC_CRASH_PREP 25		/* Prepare system for crash dump */
+#define PDC_ALLOC	24		/* allocate static storage for PDC & IODC */
+
+#define PDC_CRASH_PREP	25		/* Prepare system for crash dump */
+#define PDC_CRASH_DUMP		0	/* Do platform specific preparations for dump */
+#define PDC_CRASH_LOG_CEC_ERROR 1	/* Dump hardware registers	*/
+
+#define PDC_SCSI_PARMS	26		/* Get and set SCSI parameters	*/
+#define PDC_SCSI_GET_PARMS	0	/* Get SCSI parameters for I/O device */
+#define PDC_SCSI_SET_PARMS	1	/* Set SCSI parameters for I/O device */
 
 /* HVERSION dependent */