Skip to contentSkip to conversation

ppc: fix crash during branch stepping

PATCH Applied Roman Kapl 2 participants 2 messages Feb 12, 2019 – Feb 13, 2019

lore
Share & tools
lore

Roman Kapl

author
#0 lore raw

PATCH 1/1 ppc: fix crash during branch stepping

The PPC BRANCH exception could bubble up, but this is an QEMU internal exception and QEMU then crased. Instead it should trigger TRACE exception, according to PPC 2.07 book. It could happen only when using branch stepping, which is not commonly used.

Change gen_prep_dbgex do do trigger TRACE. The excp, argument is now removed, since the type of exception can be inferred from the singlestep_enabled flags. removed the guards around gen_exception, since they are unnecessary.

Fixes 0e3bf48909 ("ppc: add DBCR based debugging").
---
 target/ppc/translate.c | 37 +++++++++++++++----------------------
 1 file changed, 15 insertions(+), 22 deletions(-)
target/ppc/translate.c +15 -22
index e169c43643..c22d1a69c7 100644
@@ -287,26 +287,22 @@ static void gen_exception_nip(DisasContext *ctx, uint32_t excp,
     ctx->exception = (excp);
 }
 
-/* Translates the EXCP_TRACE/BRANCH exceptions used on most PowerPCs to
- * EXCP_DEBUG, if we are running on cores using the debug enable bit (e.g.
- * BookE).
+/*
+ * Tells the caller what is the appropriate exception to generate and prepares
+ * SPR registers for this exception.
+ *
+ * The exception can be either POWERPC_EXCP_TRACE (on most PowerPCs) or
+ * POWERPC_EXCP_DEBUG (on BookE).
  */
-static uint32_t gen_prep_dbgex(DisasContext *ctx, uint32_t excp)
+static uint32_t gen_prep_dbgex(DisasContext *ctx)
 {
-    if ((ctx->singlestep_enabled & CPU_SINGLE_STEP)
-        && (excp == POWERPC_EXCP_BRANCH)) {
-        /* Trace excpt. has priority */
-        excp = POWERPC_EXCP_TRACE;
-    }
     if (ctx->flags & POWERPC_FLAG_DE) {
         target_ulong dbsr = 0;
-        switch (excp) {
-        case POWERPC_EXCP_TRACE:
+        if (ctx->singlestep_enabled & CPU_SINGLE_STEP) {
             dbsr = DBCR0_ICMP;
-            break;
-        case POWERPC_EXCP_BRANCH:
+        } else {
+            /* Must have been branch */
             dbsr = DBCR0_BRT;
-            break;
         }
         TCGv t0 = tcg_temp_new();
         gen_load_spr(t0, SPR_BOOKE_DBSR);
@@ -315,7 +311,7 @@ static uint32_t gen_prep_dbgex(DisasContext *ctx, uint32_t excp)
         tcg_temp_free(t0);
         return POWERPC_EXCP_DEBUG;
     } else {
-        return excp;
+        return POWERPC_EXCP_TRACE;
     }
 }
 
@@ -3652,10 +3648,8 @@ static void gen_lookup_and_goto_ptr(DisasContext *ctx)
         if (sse & GDBSTUB_SINGLE_STEP) {
             gen_debug_exception(ctx);
         } else if (sse & (CPU_SINGLE_STEP | CPU_BRANCH_STEP)) {
-            uint32_t excp = gen_prep_dbgex(ctx, POWERPC_EXCP_BRANCH);
-            if (excp != POWERPC_EXCP_NONE) {
-                gen_exception(ctx, excp);
-            }
+            uint32_t excp = gen_prep_dbgex(ctx);
+            gen_exception(ctx, excp);
         }
         tcg_gen_exit_tb(NULL, 0);
     } else {
@@ -7785,9 +7779,8 @@ static void ppc_tr_translate_insn(DisasContextBase *dcbase, CPUState *cs)
                  ctx->exception != POWERPC_SYSCALL &&
                  ctx->exception != POWERPC_EXCP_TRAP &&
                  ctx->exception != POWERPC_EXCP_BRANCH)) {
-        uint32_t excp = gen_prep_dbgex(ctx, POWERPC_EXCP_TRACE);
-        if (excp != POWERPC_EXCP_NONE)
-            gen_exception_nip(ctx, excp, ctx->base.pc_next);
+        uint32_t excp = gen_prep_dbgex(ctx);
+        gen_exception_nip(ctx, excp, ctx->base.pc_next);
     }
 
     if (tcg_check_temp_count()) {
Signature · 1 line
2.20.1.390.gb5101f9297
Applied
#1 lore raw
Quoted 11 lines · Roman Kapl

The PPC BRANCH exception could bubble up, but this is an QEMU internal exception and QEMU then crased. Instead it should trigger TRACE exception, according to PPC 2.07 book. It could happen only when using branch stepping, which is not commonly used.

Change gen_prep_dbgex do do trigger TRACE. The excp, argument is now removed, since the type of exception can be inferred from the singlestep_enabled flags. removed the guards around gen_exception, since they are unnecessary.

Fixes 0e3bf48909 ("ppc: add DBCR based debugging").

Applied to ppc-for-4.0, thanks.

Quoted 79 lines
---
 target/ppc/translate.c | 37 +++++++++++++++----------------------
 1 file changed, 15 insertions(+), 22 deletions(-)
target/ppc/translate.c +15 -22
index e169c43643..c22d1a69c7 100644
@@ -287,26 +287,22 @@ static void gen_exception_nip(DisasContext *ctx, uint32_t excp,
     ctx->exception = (excp);
 }
 
-/* Translates the EXCP_TRACE/BRANCH exceptions used on most PowerPCs to
- * EXCP_DEBUG, if we are running on cores using the debug enable bit (e.g.
- * BookE).
+/*
+ * Tells the caller what is the appropriate exception to generate and prepares
+ * SPR registers for this exception.
+ *
+ * The exception can be either POWERPC_EXCP_TRACE (on most PowerPCs) or
+ * POWERPC_EXCP_DEBUG (on BookE).
  */
-static uint32_t gen_prep_dbgex(DisasContext *ctx, uint32_t excp)
+static uint32_t gen_prep_dbgex(DisasContext *ctx)
 {
-    if ((ctx->singlestep_enabled & CPU_SINGLE_STEP)
-        && (excp == POWERPC_EXCP_BRANCH)) {
-        /* Trace excpt. has priority */
-        excp = POWERPC_EXCP_TRACE;
-    }
     if (ctx->flags & POWERPC_FLAG_DE) {
         target_ulong dbsr = 0;
-        switch (excp) {
-        case POWERPC_EXCP_TRACE:
+        if (ctx->singlestep_enabled & CPU_SINGLE_STEP) {
             dbsr = DBCR0_ICMP;
-            break;
-        case POWERPC_EXCP_BRANCH:
+        } else {
+            /* Must have been branch */
             dbsr = DBCR0_BRT;
-            break;
         }
         TCGv t0 = tcg_temp_new();
         gen_load_spr(t0, SPR_BOOKE_DBSR);
@@ -315,7 +311,7 @@ static uint32_t gen_prep_dbgex(DisasContext *ctx, uint32_t excp)
         tcg_temp_free(t0);
         return POWERPC_EXCP_DEBUG;
     } else {
-        return excp;
+        return POWERPC_EXCP_TRACE;
     }
 }
 
@@ -3652,10 +3648,8 @@ static void gen_lookup_and_goto_ptr(DisasContext *ctx)
         if (sse & GDBSTUB_SINGLE_STEP) {
             gen_debug_exception(ctx);
         } else if (sse & (CPU_SINGLE_STEP | CPU_BRANCH_STEP)) {
-            uint32_t excp = gen_prep_dbgex(ctx, POWERPC_EXCP_BRANCH);
-            if (excp != POWERPC_EXCP_NONE) {
-                gen_exception(ctx, excp);
-            }
+            uint32_t excp = gen_prep_dbgex(ctx);
+            gen_exception(ctx, excp);
         }
         tcg_gen_exit_tb(NULL, 0);
     } else {
@@ -7785,9 +7779,8 @@ static void ppc_tr_translate_insn(DisasContextBase *dcbase, CPUState *cs)
                  ctx->exception != POWERPC_SYSCALL &&
                  ctx->exception != POWERPC_EXCP_TRAP &&
                  ctx->exception != POWERPC_EXCP_BRANCH)) {
-        uint32_t excp = gen_prep_dbgex(ctx, POWERPC_EXCP_TRACE);
-        if (excp != POWERPC_EXCP_NONE)
-            gen_exception_nip(ctx, excp, ctx->base.pc_next);
+        uint32_t excp = gen_prep_dbgex(ctx);
+        gen_exception_nip(ctx, excp, ctx->base.pc_next);
     }
 
     if (tcg_check_temp_count()) {
Signature · 4 lines
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson