Skip to contentSkip to conversation

at24: add support for 24c2048

PATCH Applied Adrian Bunk 2 participants 4 messages Feb 17, 2019

Subsystems (2)
Stable branch I2C subsystem host drivers
lore
Share & tools
lore

Adrian Bunk

author
#0 lore raw

v2 cover at24: add support for 24c2048

There are some changes in the driver that prevent a direct cherry-pick to older kernels, including requiring only one line addition in the backport while the upstream commit requires three.

Backport applies and builds against 4.9/4.14 (but not 4.4). Confirmed working with 4.14.
For 4.19/4.20 please cherry-pick the upstream commits instead.

Adrian Bunk (2):
dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string
eeprom: at24: add support for 24c2048

 Documentation/devicetree/bindings/eeprom/eeprom.txt | 5 +++--
 drivers/misc/eeprom/Kconfig                         | 2 +-
 drivers/misc/eeprom/at24.c                          | 1 +
 3 files changed, 5 insertions(+), 3 deletions(-)
Signature · 1 line
2.11.0
author
#1 lore raw

PATCH v2 1/2 dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string

commit 6c0c5dc33ff42af49243e94842d0ebdb153189ea upstream.

Add new compatible to the device tree bindings.

Signed-off-by Adrian Bunk <[email protected]>
Acked-by Rob Herring <[email protected]>
Signed-off-by Bartosz Golaszewski <[email protected]>
---
 Documentation/devicetree/bindings/eeprom/eeprom.txt | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/eeprom/eeprom.txt +3 -2
index afc04589eadf..3c9a822d576c 100644
@@ -6,7 +6,8 @@ Required properties:
 
 	"atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04",
 	"atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64",
-	"atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024"
+	"atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024",
+	"atmel,24c2048"
 
 	"catalyst,24c32"
 

@@ -23,7 +24,7 @@ Required properties:
 	 device with <type> and manufacturer "atmel" should be used.
 	 Possible types are:
 	 "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64",
-	 "24c128", "24c256", "24c512", "24c1024", "spd"
+	 "24c128", "24c256", "24c512", "24c1024", "24c2048", "spd"
 
   - reg : the I2C address of the EEPROM
Signature · 1 line
2.11.0
author
#2 lore raw

PATCH v2 2/2 eeprom: at24: add support for 24c2048

In reply to Adrian Bunk

commit 37cf28d3b5bca1b532a0b6aac722e7f2788a9294 upstream.

Works with ST M24M02.

Signed-off-by Adrian Bunk <[email protected]>
Signed-off-by Bartosz Golaszewski <[email protected]>
---
 drivers/misc/eeprom/Kconfig | 2 +-
 drivers/misc/eeprom/at24.c  | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/misc/eeprom/Kconfig +1 -1
index de58762097c4..3f93e4564cab 100644
@@ -12,7 +12,7 @@ config EEPROM_AT24
 	  ones like at24c64, 24lc02 or fm24c04:
 
 	     24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
-	     24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
+	     24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024, 24c2048
 
 	  Unless you like data loss puzzles, always be sure that any chip
 	  you configure as a 24c32 (32 kbit) or larger is NOT really a
drivers/misc/eeprom/at24.c +1 -0
index ded48a0c77ee..59dcd97ee3de 100644
@@ -170,6 +170,7 @@ static const struct i2c_device_id at24_ids[] = {
 	{ "24c256",	AT24_DEVICE_MAGIC(262144 / 8,	AT24_FLAG_ADDR16) },
 	{ "24c512",	AT24_DEVICE_MAGIC(524288 / 8,	AT24_FLAG_ADDR16) },
 	{ "24c1024",	AT24_DEVICE_MAGIC(1048576 / 8,	AT24_FLAG_ADDR16) },
+	{ "24c2048",	AT24_DEVICE_MAGIC(2097152 / 8,	AT24_FLAG_ADDR16) },
 	{ "at24", 0 },
 	{ /* END OF LIST */ }
 };
Signature · 1 line
2.11.0
maintainer Applied
#3 lore raw
In reply to Adrian Bunk
Quoted 9 lines · Adrian Bunk

There are some changes in the driver that prevent a direct cherry-pick to older kernels, including requiring only one line addition in the backport while the upstream commit requires three.

Backport applies and builds against 4.9/4.14 (but not 4.4). Confirmed working with 4.14.
For 4.19/4.20 please cherry-pick the upstream commits instead.

Quoted 8 lines

Adrian Bunk (2):
dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string
eeprom: at24: add support for 24c2048

Documentation/devicetree/bindings/eeprom/eeprom.txt | 5 +++--
drivers/misc/eeprom/Kconfig                         | 2 +-
drivers/misc/eeprom/at24.c                          | 1 +
3 files changed, 5 insertions(+), 3 deletions(-)

Queued for 4.14 and 4.9, thank you.